ATR7039-PES [ATMEL]
Frequency Doubler, 2900MHz Min, 5800MHz Max, 4 X 4 MM, MO-220, QFN-16;型号: | ATR7039-PES |
厂家: | ATMEL |
描述: | Frequency Doubler, 2900MHz Min, 5800MHz Max, 4 X 4 MM, MO-220, QFN-16 半导体 倍频器 |
文件: | 总8页 (文件大小:220K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
TM
Features
•
•
•
•
•
•
Input Frequency Range 2.7 GHz to 3.0 GHz
POUT Typically 12 dBm at 5.8 GHz
PIN Typically 0 dBm
2.9 GHz to
5.8 GHz SiGe
Frequency
Doubler IC
VCC 3.0V to 3.9V
CW Mode Operation
Package: QFN16
Benefits
•
•
•
Ramping Control Extends Battery Lifetime
AC Input Coupling Saves External Capacitors
Extremely Low BOM for Application
ATR7039
Preliminary
Electrostatic sensitive device.
Observe precautions for handling.
1. Description
The 5.8-GHz frequency doubler IC is designed with Atmel’s Silicon-Germanium
(SiGe) process and provides a high conversion gain.
The device consists of a doubler stage, a filter and a driver amplifier with an output
power of 11 dBm. The output stage was realized using an open-collector structure.
Power-up/down and output levels are controlled via the bias control pin 6 and pin 7
(VCTL).
Rev. 4786E–DECT–10/05
Figure 1-1. Block Diagram
VCC1
15
VCC2
13
ATR7039
RFOUT
11
RFIN
3
Frequency
doubler
Filter
RFOUT
10
Bias control
6
7
16
VCTL1
VCC_TL
VCTL2
2
ATR7039 [Preliminary]
4786E–DECT–10/05
ATR7039 [Preliminary]
2. Pin Configuration
Figure 2-1. Pinning QFN16
16 15 14 13
GND
NC
12 GND
11 RFOUT
10 RFOUT
1
2
3
4
RFIN
GND
GND on the
Paddle
9
GND
5
6 7 8
Table 2-1.
Pin Description
Pin
Symbol
GND
Function
1
2
Ground
NC
Not connected
RF input
Ground
3
RFIN
4
GND
5
GND
Ground
6
VCTL1
VCTL2
GND
Power-up/biasing control voltage to frequency doubler stage
7
Power-up/biasing control voltage to output amplifier stage
8
Ground
9
GND
Ground
10
11
12
13
14
15
16
Paddle
RFOUT
RFOUT
GND
RF output
RF output
Ground
VCC2
GND
Supply voltage for output amplifier stage
Ground
VCC1
VCC_CTL
–
Supply voltage for frequency doubler stage
Supply voltage for biasing control
Ground
3
4786E–DECT–10/05
3. Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating
only and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this
specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
Parameters
Symbol
VCC
Value
Unit
V
Supply voltage, no RF
Supply current
5
400
ICC
mA
°C
Junction temperature
Storage temperature
Input RF power
Tj
150
TStg
–40 to +125
13
°C
PIN
dBm
V
Control voltage
VCTL1,2
2.5
Note:
The part may not survive all parameters at maximum applied simultaneously!
4. Thermal Resistance
Parameters
Symbol
Value
Unit
Junction ambient QFN16 package,
slug soldered on PCB
RthJA
40
K/W
5. Operating Range
Parameters
Symbol
VCC
Value
Unit
V
Supply voltage
3.0 to 3.9
Input frequency range
Output frequency range
Ambient temperature range
fin
2700 to 3000
5400 to 6000
–25 to +75
MHz
MHz
°C
fout
Tamb
4
ATR7039 [Preliminary]
4786E–DECT–10/05
ATR7039 [Preliminary]
6. Electrical Characteristics
No. Parameters
Test Conditions
Pin
Symbol
Min.
Typ.
Max.
Unit
Type*
1.0
Input power
3
Pin
0
10
dBm
A
Measured at harmonic
frequency 2f
1.1
10, 11
10, 11
10, 11
10, 11
P2f
P3f
P1f
Pd
12
-8
dBm
dBm
dBm
dB
A
A
A
A
Measured at harmonic
frequency 3f
1.2
1.3
1.4
Output power
Measured at
fundamental frequency
TBD
Measured at harmonic
frequency
Output power deviation
Control voltage range
–2
+2
6
7
VCTL1
VCTL2
1.4
1.7
V
V
V
A
A
A
Doubler operating
mode
1.5
1.6
1.7
Power down mode
6, 7
VCTL1,2
0.2
–8
Input and output return
loss
3, 10,
11
With external matching
–12
36
dB
dB
C
C
A
3, 10,
11
1.8
1.9
Reverse isolation
2f
ISOr
ICC
30
13, 15,
16
Current consumption
for 12dBm output power
90
mA
Current consumption in
power down mode
13, 15,
16
1.10
2.0
V
CTL1,2 ≤ 0.2V
ICC
15
µA
%
A
C
Duty cycle
100
*) Type means: A = 100% tested, B = 100% correlation tested, C = Characterized on samples, D = Design parameter
5
4786E–DECT–10/05
7. Application Circuit
VCC_CTL
VCC1
VCC2
C11
C5
C6
Output
*
Input
ATR7039
C2
C3
*
C15
C1
C7
* microstrip line
VCTL1
VCTL2
6
ATR7039 [Preliminary]
4786E–DECT–10/05
ATR7039 [Preliminary]
8. Ordering Information
Extended Type Number
Package
Remarks
ATR7039-PESG
QFN16 - 4x4
QFN16 - 4x4
Tube, MOQ 750, Pb-free
ATR7039-PEQG
Taped and reeled, MOQ 6000, Pb-free
9. Package Information
7
4786E–DECT–10/05
Atmel Corporation
Atmel Operations
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Memory
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
Regional Headquarters
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
ASIC/ASSP/Smart Cards
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDI-
TIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-
TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are® and others, are registered trade-
marks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
4786E–DECT–10/05
相关型号:
©2020 ICPDF网 联系我们和版权申明