5082-3903-00000 [AVAGO]
Smart/Normal 7 Seg Numeric LED Display, High Efficiency Red, 20mm, PLASTIC, DIP-18;型号: | 5082-3903-00000 |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | Smart/Normal 7 Seg Numeric LED Display, High Efficiency Red, 20mm, PLASTIC, DIP-18 |
文件: | 总10页 (文件大小:154K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HDSP-390xSeries
20 mm (0.8 inch) Seven Segment Displays
DataSheet
HDSP-390x Series
HDSP-420x Series
HDSP-860x Series
HDSP-N15x Series
Description
Features
The 20 mm (0.8 inch) LED seven segment displays are
designed for viewing distances up to 10 metres (33
feet). These devices use an industry standard size
package and pinout. All devices are available as either
common anode or common cathode.
• Industry standard size
• Industry standard pinout
15.24 mm (0.6 in.) DIP leads on 2.54 mm (0.1 in.) centers
• Choice of Colors
AlGaAs Red, High Efficiency Red, Yellow, Green
• Excellent appearance
Evenly lighted segments
Mitered corners on segments
Gray package gives optimum contrast
±50° viewing angle
These displays are ideal for most applications. Pin for
pin equivalent displays are also available in a low
current design. The low current displays are ideal for
portable applications. For additional information see
the Low Current Seven Segment Displays data sheet.
• Design flexibility
Common anode or common cathode
Left and right hand decimal points
±1. overflow character
• Categorized for luminous intensity
Yellow and green categorized for color
Use of like categories yields a uniform display
• High light output
• High peak current
• Excellent for long digit string multiplexing intensity
and color selection option
See Intensity and Color Selected Displays Data Sheet
• Sunlight viewable AlGaAs
Devices
AlGaAs[1]
HDSP-
N150
HER
HDSP-
3900
3901
3903
3905
3906
Yellow
HDSP-
4200
Green
HDSP-
8600
Package
Description
Drawing
Common Anode Left Hand Decimal
Common Anode Right Hand Decimal
Common Cathode Right Hand Decimal
Common Cathode Left Hand Decimal
Universal ±1. Overflow[2]
A
B
C
D
E
N151
4201
8601
N153
4203
8603
N155
4205
8605
N156
4206
8606
Notes:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-N10x AlGaAs data sheet for low current operation.
2. Universal pinout brings the anode and cathode of each segment's LED out to separate pins. See internal diagram E.
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Opt ions[1]
00: No Mechanical Option
Color Bin Opt ions[1,2]
0: No Color Bin Limitation
Z: Color Bins 2- and 3+ Only (applicable for Yellow devices only)
Maximum Int ensit y Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Int ensit y Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configurat ion/Color[1]
0: Common Anode
1: Common Anode
3: Common Cathode
Device Specific Configurat ion[1]
Refer to Respective Datasheet
Package[1]
N: 20 mm (0.8 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago
representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube
(exceptions may apply). Please refer to respective datasheet for specific bin limit information.
2
Package Dimensions
Internal Circuit Diagram
A
B
C
E
D
3
Absolute Maximum Ratings
AlGaAs Red
HDSP-N150
Series
HER
HDSP-3900
Series
Yellow
HDSP-4200
Series
Green
HDSP-8600
Series
Description
Units
mW
mA
Average Power per Segment or DP
96
105
105
105
Peak Forward Current per
Segment or DP
160[1]
135[3]
135[3]
90[5]
DC Forward Current per
Segment or DP
40[2]
40[4]
40[4]
30[6]
mA
Operating Temperature Range
Storage Temperature Range
–20 to +100[7]
–40 to +100
–40 to +100
°C
°C
V
–55 to +100
3.0
Reverse Voltage per Segment or DP
Wave Soldering Temperature for
3 Seconds (1.60 mm [0.063 in.]
below body)
250
°C
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 55°C at 0.8 mA/ °C.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 50°C at 0.73 mA/ °C.
5. See Figure 8 to establish pulsed conditions.
6. Derate above 50°C at 0.54 mA/ °C.
7. For operation below –20°C, contact your local Avago components sales office or an authorized distributor.
4
Electrical/ Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
Parameter
Symbol
Min.
Typ. Max.
Units
Test Conditions
Luminous Intensity/ Segment[1,2,5]
(Digit Average)
IV
6.0
14.0
mcd
IF = 20 mA
1.8
V
V
IF = 20 mA
Forward Voltage/ Segment or DP
V
F
2.0
3.0
IF = 100 mA
HDSP-
N15x
Peak Wavelength
λPEAK
λd
645
637
15
nm
nm
Dominant Wavelength[3]
Reverse Voltage/ Segment or DP[4]
Temperature Coefficient of
V
R
3.0
V
IR = 100 µA
∆V / °C
-2
mV/ °C
F
V / Segment or DP
F
Thermal Resistance LED Junction-
to-Pin
RθJ-PIN
430
°C/ W/
Seg
High Efficiency Red
Device
Series
Parameter
Symbol
Min.
Typ. Max.
Units
Test Conditions
3350
7000
µcd
IF = 100 mA Peak:
1 of 5 df
Luminous Intensity/ Segment[1,2]
(Digit Average)
IV
4800
µcd
IF = 20 mA
Forward Voltage/ Segment or DP
V
F
2.6
3.5
V
IF = 100 mA
HDSP-
390x
Peak Wavelength
λPEAK
λd
635
626
25
nm
nm
Dominant Wavelength[3]
Reverse Voltage/ Segment or DP[4]
Temperature Coefficient of
V
R
3.0
V
IR = 100 µA
∆V / °C
-2
mV/ °C
F
V / Segment or DP
F
Thermal Resistance LED Junction-
to-Pin
RθJ-PIN
375
°C/ W/
Seg
5
Yellow
Device
Series
Parameter
Symbol
Min.
Typ. Max.
Units
Test Conditions
2200
7000
µcd
IF = 100 mA Peak:
1 of 5 df
Luminous Intensity/ Segment[1,2]
(Digit Average)
IV
3400
µcd
IF = 20 mA
Forward Voltage/ Segment or DP
V
F
2.6
3.5
V
IF = 100 mA
HDSP-
420x
Peak Wavelength
λPEAK
λd
583
586
nm
nm
Dominant Wavelength[3,6]
581.5
3.0
592.5
Reverse Voltage/ Segment or DP[4]
V
R
25.0
-2
V
IR = 100 µA
Temperature Coefficient of
∆V / °C
mV/ °C
F
V / Segment or DP
F
Thermal Resistance LED Junction-
to-Pin
RθJ-PIN
375
°C/ W/
Seg
Green
Device
Series
Parameter
Symbol
Min.
Typ. Max.
Units
Test Conditions
680
1500
µcd
IF = 10 mA
Luminous Intensity/ Segment[1,2]
(Digit Average)`
IV
1960
µcd
IF = 50 mA Peak:
1 of 5 df
Forward Voltage/ Segment or DP
Peak Wavelength
V
2.1
2.5
V
IF = 10 mA
F
HDSP-
860x
λPEAK
λd
566
nm
Dominant Wavelength[3,6]
571
50.0
-2
577
nm
V
Reverse Voltage/ Segment or DP[4]
V
R
3.0
IR = 100 µA
Temperature Coefficient of
∆V / °C
mV/ °C
F
V / Segment or DP
F
Thermal Resistance LED Junction-
to-Pin
RθJ-PIN
375
°C/ W/
Seg
Notes:
1. Case temperature of the device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs Red HDSP-N100 series displays are recommended. They are tested at 1 mA dc/ segment and are pin for pin
compatible with the HDSP-N150 series.
6. The Yellow (HDSP-4200) and Green (HDSP-8600) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
6
AlGaAs Red
100
OPERATION IN
THIS REGION
REQUIRES
TEMPERATURE
DERATING
10
OF I
MAX.
DC
10 kHZ
100 HZ
300 HZ
3 kHZ
1 kHZ
DC OPERATION
1
0.1
1
10
100
1000
10,000
t P – PULSE DURATION – µs
Figure 1. Maximum allowed peak current vs. pulse duration – AlGaAs Red.
50
45
40
35
200
180
160
140
120
100
80
AlGaAs RED
AlGaAs RED
30
25
20
Rθ
= 525°C/W
J-A
15
10
5
60
40
20
0
0
10 20 30 40 50 60 70 80 90
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
100 110
4.5 5.0
T
– AMBIENT TEMPERATURE – °C
V
– FORWARD CURRENT – V
A
F
Figure 2. Maximum allowable DC current vs. ambient
temperature.
Figure 3. Forward current vs. forward voltage.
2.50
2.25
2.00
1.75
1.50
1.25
1.2
1.1
1.0
AlGaAs RED
0.9
AlGaAs RED
1.00
0.8
0.7
0.6
0.75
0.50
0.25
0
0
F
5
10 15 20 25 30 35 40
45 50
2
3
4 5
10
20 30 40 50 100
200
I
– FORWARD CURRENT PER SEGMENT – mA
I
– PEAK FORWARD CURRENT PER SEGMENT
PEAK
Figure 4. Relative luminous intensity vs. DC forward
current.
Figure 5. Relative efficiency (luminous intensity per unit
current) vs. peak current.
7
HER, Yellow, Green
100
100
10
1
OPERATION IN
THIS REGION
REQUIRES
TEMPERATURE
DERATING
OPERATION IN
THIS REGION
REQUIRES
100 HZ
10
10 kHZ
1 kHZ
TEMPERATURE
DERATING
10 kHZ
1 kHZ
100 HZ
300 HZ
3 kHZ
OF I
MAX.
DC
OF I
MAX.
DC
DC OPERATION
DC OPERATION
1
0.1
1
10
100
1000
10,000
1
10
100
1000
10,000
t P – PULSE DURATION – µS
t P – PULSE DURATION – µS
Figure 6. Maximum allowed peak current vs. pulse duration –
HER, Yellow.
Figure 7. Maximum allowed peak current vs. pulse duration – Green.
140
120
50
45
40
100
35
YELLOW
HER / YELLOW
HER
30
80
25
GREEN
60
40
20
15
R
= 525° C/W
θJ-A
GREEN
10
5
20
0
0
10 20 30 40 50 60 70 80 90
0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
100 110
T
– AMBIENT TEMPERATURE – °C
V
F
– FORWARD VOLTAGE – V
A
Figure 8. Maximum allowable DC current vs. ambient
temperature.
Figure 9. Forward current vs. forward voltage.
1.5
1.4
1.3
1.2
4.0
3.5
3.0
GREEN
1.1
2.5
GREEN
1.0
HER
0.9
2.0
1.5
0.8
0.7
YELLOW
0.6
HER AND
YELLOW
1.0
0.5
0.4
0.5
0
0.3
0
F
5
10
15
25
30
35 40
10 20 30 40 50 60 70 80 90 100 110120 130
20
I
– FORWARD CURRENT PER SEGMENT – mA
I
– PEAK FORWARD CURRENT
PER SEGMENT – mA
PEAK
Figure 10. Relative luminous intensity vs. DC forward
current.
Figure 11. Relative efficiency (luminous intensity per unit current)
vs. peak current.
8
Intensity Bin Limits (mcd)
AlGaAs Red
Color Categories
HDSP-N15x
Dominant Wavelength (nm)
IV Bin Category
Min.
6.14
Max.
11.20
16.90
25.30
38.00
56.90
85.40
Color
Bin
Min.
Max.
J
Yellow
1
3
2
4
2
3
4
5
581.50
584.00
586.50
589.00
573.00
570.00
567.00
564.00
585.00
587.50
590.00
592.50
577.00
574.00
571.00
568.00
K
L
9.20
13.80
20.70
31.10
46.60
M
N
O
Green
Yellow
Note:
HDSP-420x
All categories are established for classification of products. Products may not
be available in all categories. Please contact your Avago representatives for
further clarification/ information.
IV Bin Category
Min.
2.23
Max.
4.09
C
D
E
F
3.35
6.14
5.02
9.21
Contrast Enhancement
7.53
13.82
20.72
31.08
46.62
For information on contrast enhancement, please see
Application Note 1015.
G
H
I
11.30
16.95
25.43
Soldering/ Cleaning
Cleaning agents from the ketone family (acetone,
methyl ethyl ketone, etc.) and from the chlorinated
hydrocarbon family (methylene chloride, trichloro-
ethylene, carbon tetrachloride, etc.) are not
recommended for cleaning LED parts. All of these
various solvents attack or dissolve the encapsulating
epoxies used to form the package of plastic LED parts.
Green
HDSP-860x
IV Bin Category
Min.
1.03
1.54
2.31
3.47
5.21
Max.
1.88
2.82
4.25
6.37
9.55
D
E
F
For information on soldering LEDs, please refer to
Application Note 1027.
G
H
HER
HDSP-390x
IV Bin Category
Min.
3.35
Max.
6.14
D
E
F
G
H
I
5.02
9.21
7.53
13.82
20.72
31.08
46.62
11.30
16.95
25.43
9
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5964-6426EN
5988-1737EN May 3, 2006
相关型号:
5082-4160
Single Color LED, High Efficiency Red, Tinted Diffused, T-3/4, 1.78mm, PLASTIC PACKAGE-2
AGILENT
©2020 ICPDF网 联系我们和版权申明