5082-K403-00000 [AVAGO]
7 SEG NUMERIC DISPLAY, ORANGE, 14.22mm, PLASTIC, DIP-18;
| 型号： | 5082-K403-00000 |
| 厂家： | 
AVAGO TECHNOLOGIES LIMITED |
| 描述： | 7 SEG NUMERIC DISPLAY, ORANGE, 14.22mm, PLASTIC, DIP-18 光电 |
| 文件： | 总11页 (文件大小：243K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HDSP Series
14.2 mm (0.56 inch)
Seven Segment Displays
Data Sheet
HDSP-K40x Series
HDSP-550x Series
HDSP-552x Series
HDSP-560x Series
HDSP-562x Series
HDSP-570x Series
HDSP-572x Series
HDSP-H15x Series
HDSP-H40x Series
Features
• Industry Standard Size
• Industry Standard Pinout
15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Cen-
ters
• Choice of Colors
AlGaAs Red, High Efficiency Red, Yellow, Green, ꢀrange
• Excellent Appearance
Evenly Lighted Segments
Mitered Corners on Segments
Gray Package Gives ꢀptimum Contrast
50ꢁ Viewing Angle
• Design Flexibility
Common Anode or Common Cathode
Single and Dual Digits
Right Hand Decimal Point
1. ꢀverflow Character
• Categorized for Luminous Intensity
Description
The 14.2 mm (0.56 inch) LED seven segment displays are
designed for viewing distances up to 7 metres (23 feet).
These devices use an industry standard size package and
pinout. Both the numeric and 1 overflow devices feature a
right hand decimal point. All devices are available as either
common anode or common cathode.
These displays are ideal for most applications. Pin for pin
IFAVG DATA SHEET = 10 mA
h
Peak = 1.3
IV DATA SHEET = 2800 mcd
Yellow and Green Categorized for Color
Use of Like Categories Yields a Uniform Display
Therefore
• High Light Output
• High Peak Current
• Excellent for Long Digit String Multiplexing
IvAVG = (10 mA/10 mA)
(1.3)(2800 mcd)
= 3640 mcd
• Intensity and Color Selection Option
See Intensity and Color Selected Displays Data Sheet
• Sunlight Viewable AlGaAs
Devices
Orange
HDSP-
AlGaAs Red
HDSP-[1]
HER
Yellow
HDSP-
Green
HDSP-
Package
Drawing
HDSP-[1]
Description
H401
H403
H151
H153
H157
H158
5501
5503
5507
5508
5521
5523
5701
5703
5707
5708
5721
5723
5601
5603
5607
5608
5621
5623
Common Anode Right Hand Decimal
Common Cathode Right Hand Decimal
Common Anode 1. ꢀverflow
A
B
C
D
E
Common Cathode 1. ꢀverflow
K401
K403
Two Digit Common Anode Right Hand Decimal
Two Digit Common Cathode Right Hand Decimal
F
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet
for low current operation.
Contrast Enhancement
Mechanical
The objective of contrast enhancement is to provide good
displayreadabilityintheenduseambientlight.Theconcept
is to employ both luminance and chrominance contrast
techniquestoenhancethereadability.Thisisaccomplished
by having the ꢀFF dots blend into the display background
Specially developed plastics are used to optimize the
displays optical performance. These plastics restrict the
solvents that may be used for cleaning. ꢀnly mixtures of
Freon (F113) and alcohol should be used for vapor clean-
ing processes. Total immersion time in the vapors is two
and the ꢀN dots stand out vividly against this same back- minutes. Some suggested mixtures are Freon TE, Arklone
ground. Therefore, these display devices are assembled A or K, or Genesolv DI-15 or DE-15. A 60ꢁC (140ꢁF) water
with a gray package and matching encapsulating epoxy cleaning process may also be used. This process includes
in the dots.
a neutralizer rinse (3% ammonia solution or equivalent),
a surfactant rinse (1% detergent solution or equivalent),
a water rinse, and a thorough air dry. Room temperature
cleaning may be done with Freon T-E35 or T-P35, Ethanol,
Isopropanol, or water with a mild detergent.
Contrast enhancement may be achieved by using one of
the following suggested filters:
Standard Red and AlGaAs Red (HDSP-5300/H150)
Panelgraphic RUBY RED 60
SGL-Homalite H100-1605 RED
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloroethylene, carbon
tetrachloride, etc.) are not recommended for cleaning
LED parts. All of these various solvents attack or dissolve
the encapsulating epoxies used to form the package of
plastic LED parts.
3M Louvered Filter R6610 RED or N0210 GRAY
HER (HDSP-5500)
Panelgraphic SCARLET RED 60
SGL-Homalite H100-1670 RED or H100-1250 GRAY
3M Louvered Filter R6610 RED or N0210 GRAY
Yellow (HDSP-5700)
Panelgraphic YELLꢀW 27 or GRAY 10
SGL-Homalite H100-1720 AMBER or H100-1250 GRAY
3M Louvered Filter A5910 AMBER or N0210 GRAY
Green (HDSP-5600)
Panelgraphic GREEN 48
SGL-Homalite H100-1440 GREEN or H100-1250 GRAY
3M Louvered Filter YG6610 RED or N0210 GRAY
For further information on contrast enhancement please
see Application Note 1015.
2
These displays are ideal for most applications. Pin for pin
equivalentdisplaysarealsoavailableinalowcurrentdesign.
The low current displays are ideal for portable applications.
For additional information see the Low Current Seven Seg-
ment Displays data sheet.
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical ꢀption
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago rep-
resentative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per
tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
3
Package Dimensions
FUNCTION
ANODE c
PIN
1
A
B
ANODE e
ANODE d
CATHODE[4]
ANODE c
ANODE DP
ANODE b
ANODE a
CATHODE[4]
ANODE f
C
D
E
F
CATHODE e
CATHODE d
ANODE[3]
CATHODE c
ANODE c, d
CATHODE b
ANODE a, b, DP
CATHOPDE DP
CATHODE a
ANODE a, b, DP
ANODE c, d
CATHODE d
NO PIN
E CATHODE NO. 1
D CATHODE NO. 1
C CATHODE NO. 1
DP CATHODE NO. 1
E CATHODE NO. 2
D CATHODE NO. 2
G CATHODE NO. 2
C CATHODE NO. 2
DP CATHODE NO. 2
B CATHODE NO. 2
A CATHODE NO. 2
F CATHODE NO. 2
DIGIT NO. 2 ANODE
DIGIT NO. 1 ANODE
B CATHODE NO. 1
A CATHODE NO. 1
G CATHODE NO. 1
F CATHODE NO. 1
E ANODE NO. 1
D ANODE NO. 1
C ANODE NO. 1
2
CATHODE c, d
ANODE b
3
4
CATHODE c
CATHODE DP
CATHODE b
CATHODE a
ANODE[3]
CATHODE a, b, DP
ANODE DE
DP ANODE NO. 1
E ANODE NO. 2
D ANODE NO. 2
G ANODE NO. 2
C ANODE NO. 2
DP ANODE NO. 2
B ANODE NO. 2
A ANODE NO. 2
F ANODE NO. 2
DIGIT NO. 2 CATHODE
DIGIT NO. 1 CATHODE
B ANODE NO. 1
A ANODE NO. 1
G ANODE NO. 1
F ANODE NO. 1
5
6
ANODE a
7
CATHODE a, b, DP
CATHODE c, d
ANODE d
8
9
CATHODE f
CATHODE g
10
11
12
13
14
15
16
17
18
ANODE g
NO PIN
NOTES:
1. ALL DIMENSIONS IN MILLIMETRES (INCHES).
2. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY.
3. REDUNDANT ANODES.
4. REDUNDANT CATHODES.
5. FOR HDSP-5600/-5700 SERIES PRODUCT ONLY.
4
Internal Circuit Diagram
Absolute Maximum Ratings
HER/Orange
HDSP-5500
HDSP-H40x
HDSP-K40x
Series
AlGaAs Red
HDSP-H150
Series
Yellow
HDSP-5700
Series
Green
HDSP-5600
Series
Description
Units
mW
mA
Average Power per Segment or DP
96
105
90[3]
80
105
90[7]
Peak Forward Current per
Segment or DP
160[1]
60[5]
DC Forward Current per Segment or DP
ꢀperating Temperature Range
Storage Temperature Range
40[2]
30[4]
20[6]
3018]
mA
ꢁC
ꢁC
V
-20 to +100[9]
-40 to +100
-55 to +100
Reverse Voltage per Segment or DP
3.0
Wavesoldering Temperature for 3 Seconds
(1.60 mm [0.063 in.] below body)
250
ꢁC
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 46ꢁC at 0.54 mA/ꢁC.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 53ꢁC at 0.45 mA/ꢁC.
5. See Figure 8 to establish pulsed conditions.
6. Derate above 81ꢁC at 0.52 mA/ꢁC.
7. See Figure 9 to establish pulsed conditions.
8. Derate above 39ꢁC at 0.37 mA/ꢁC.
9. For operation below -20ꢁC, contact your local Avago
components sales office or an authorized distributor.
5
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
Luminous Intensity/Segment[1,2,5]
(Digit Average)
IV
9.1
16.0
mcd
IF = 20 mA
1.8
2.0
IF = 20 mA
Forward Voltage/Segment or DP
VF
V
3.0
IF = 100 mA
H15X
Peak Wavelength
lPEAK
ld
645
637
15
nm
nm
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
VR
3.0
V
IR = 100 µA
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
-2
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RqJ-Pin
400
ꢁC/W/
Seg
High Efficiency Red
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
900
2800
IF = 10 mA
Luminous Intensity/Segment[1,2,6]
(Digit Average)
IV
µcd
3700
2.1
IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP
VF
2.5
V
IF = 20 mA
IR = 100 µA
55XX
Peak Wavelength
lPEAK
ld
635
626
30
nm
nm
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
VR
3.0
V
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
-2
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RqJ-Pin
345
ꢁC/W/
Seg
6
Yellow
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
600
1800
IF = 10 mA
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
µcd
2750
IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP
VF
2.1
2.5
V
IF = 20 mA
IR = 100 µA
57XX
Peak Wavelength
lPEAK
ld
583
nm
nm
Dominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]
581.5
3.0
586 592.5
VR
40
-2
V
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RqJ-Pin
345
ꢁC/W/
Seg
Orange
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
Luminous Intensity/Segment
(Segment Average)[1,2]
IV
2.37
mcd
IF = 10 mA
Forward Voltage/Segment or DP
VF
lPEAK
ld
2.1
600
603
30
2.5
V
nm
nm
V
IF = 20 mA
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
H40x
K40x
IF = 10 mA
IR = 100 µA
VR
3.0
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
-2
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RqJ-Pin
345
ꢁC/W/
Seg
7
High Performance Green
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
900
2500
IF = 10 mA
Luminous Intensity/Segment[1,2]
(Digit Average)`
IV
µcd
3100
2.1
IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP
VF
2.5
V
IF = 10 mA
IR = 100 µA
56XX
Peak Wavelength
lPEAK
ld
566
571
50
nm
nm
Dominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]
577
VR
3.0
V
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
-2
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RqJ-Pin
345
ꢁC/W/
Seg
Notes:
1. Device case temperature is 25ꢁC prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin
compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin com-
patible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
AlGaAs Red
Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – Red.
Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration – AlGaAs Red.
8
50
45
40
35
30
160
Rθ
J-A
= 770 C/W
140
120
100
80
AlGaAs RED
AlGaAs RED
25
20
15
10
5
60
40
20
0
0
20 30 40 50 60 70 80 90 100 110 120
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
T
– AMBIENT TEMPERATURE –
C
A
V
– FORWARD VOLTAGE – V
F
Figure 3. Maximum Allowable DC Current vs. Ambient Temperature.
Figure 4. Forward Current vs. Forward Voltage.
2.00
1.4
1.2
1.0
1.75
1.50
1.25
1.00
AlGaAs RED
0.75
AlGaAs RED
0.8
0.50
0.25
0
0.6
0.5
0
F
5
10
15
20
25
30
35
40
5.0
50.0 150.0
I
– FORWARD CURRENT PER SEGMENT – mA
I
– PEAK FORWARD CURRENT
PER SEGMENT – mA
PEAK
Figure 5. Relative Luminous Intensity vs. DC Forward
Current.
Figure 6. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak
Current.
HER, Yellow, Green, Orange
Figure 7. Maximum Tolerable Peak Current
Pulse Duration – HER, Orange.
vs.
Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration
– Yellow.
9
Figure 9. Maximum Tolerable Peak Current vs. Pulse
Duration – Green.
Figure 10. Maximum Allowable DC Current vs. Ambient Temperature.
1.6
90
4.0
3.5
3.0
2.5
2.0
1.5
1.0
YELLOW SERIES
1.5
GREEN SERIES
80
HER SERIES,
ORANGE SERIES
1.4
1.3
1.2
1.1
1.0
0.9
0.8
70
60
GREEN SERIES
YELLOW SERIES
50
HER SERIES,
ORANGE
SERIES
40
30
20
10
0
HER, YELLOW,
GREEN, ORANGE
0.7
0.6
0.5
0
0
10 20 30 40 50 60 70 80 90 100
1
2
3
4
5
0
5
10
15
20
25
30
35
40
I
– PEAK FORWARD CURRENT
V
– FORWARD VOLTAGE – V
PEAK
F
I
– DC FORWARD CURRENT – mA
F
Figure 11. Forward Current vs. Forward Voltage.
Figure 12. Relative Luminous Intensity vs. DC Forward
Current.
Figure 13. Relative Efficiency (Luminous Intensity per
Unit Current) vs. Peak Current.
Electrical/Optical
For more information on electrical/optical characteristics,
please see Application Note 1005.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro–ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning
LED parts. All of these various solvents attack or dissolve
the encapsulating epoxies used to form the package of
plastic LED parts.
Contrast Enhancement
For information on contrast enhancement please see Ap-
plication Note 1015.
For information on soldering LEDs please refer to Ap-
plication Note 1027.
Intensity Bin Limits (mcd)
Orange
HDSP-H40x/K40x
AlGaAs Red
IV Bin Category
Min.
0.77
0.95
1.19
1.49
1.85
2.32
2.90
Max.
1.17
1.45
1.82
2.27
2.89
3.54
4.43
HDSP-H15x
B
C
D
E
IV Bin Category
Min.
Max.
K
L
9.20
16.90
25.30
38.00
56.90
85.40
13.80
20.70
31.10
46.60
M
N
ꢀ
F
G
H
HER
HDSP-550x/552x
IV Bin Category
Min.
0.91
1.37
2.05
3.08
4.62
6.93
10.39
Max.
1.67
2.51
3.76
5.64
8.64
12.70
19.04
E
F
G
H
I
Color Categories
Dominant Wavelength (nm)
Min.
Color
Bin
Max.
J
Yellow
1
3
2
4
2
3
4
5
581.50
585.00
587.50
590.00
592.50
577.00
574.00
571.00
568.00
K
584.00
586.50
Yellow
589.00
HDSP-570x/572x
Green
573.00
IV Bin Category
Min.
0.61
0.91
1.37
2.05
3.08
4.62
6.93
10.39
Max.
1.11
1.67
2.51
3.76
5.64
8.64
12.70
19.04
570.00
D
E
F
G
H
I
567.00
564.00
Note:
All categories are established for classification of products. Products may
not be available in all categories. Please contact your Avago representa-
tives for further clarification/information.
J
K
Green
HDSP-560x/562x
IV Bin Category
Min.
0.91
1.37
2.05
3.08
4.61
Max.
1.67
2.51
3.76
5.64
8.46
E
F
G
H
I
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved.
AV02-xxxxEN - March 9, 2007
11
相关型号：
©2020 ICPDF网 联系我们和版权申明