AEAT-6010

更新时间:2025-07-09 05:43:29
品牌:AVAGO
描述:10 or 12 bit Angular Detection Device

AEAT-6010 概述

10 or 12 bit Angular Detection Device 10或12位角度检测装置

AEAT-6010 数据手册

通过下载AEAT-6010数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。

PDF下载
AEAT-6010/6012 Magnetic Encoder  
10 or 12 bit Angular Detection Device  
Data Sheet  
Description  
Features  
Avago Technologies’ AEAT-60xx series of magnetic 10 or 12 bits resolution  
encoders provides an integrated solution for angular  
detection. With ease of use in mind, these magnetic  
encoders are ideal for angular detection within 360°.  
Contactless sensing technologies  
Wide temperature range from -40° to 125°C  
Based on magnetic technologies, the device is non- Absolute angular position detection  
contact and ensures reliable operations. It is able to  
Synchronous serial interface (SSI) output for absolute  
provide absolute angle detection upon power-up, with  
a resolution of 0.0879°(12 bits version) or 0.35°(10bits  
version), which is equivalent to 4096 and 1024 positions  
position data (binary format)  
Code monotony error = 1 ꢀSB  
per revolution respectively. The positional data is Single 5V supply  
provided in serial bit stream. There is no upper speed  
limit; the only restriction is that there will be fewer  
samples per revolution as the speed increases.  
Easy Assembly, No Signal Adjustment required  
Direct Connectivity through PCB  
RoHS compliant  
Exploded View  
Applications  
Flow meter  
Magnetic  
Plastic  
Angular detection  
Knob control  
Rotary encoder  
Encoder  
Housing  
Sensor PCB  
Assembly  
Magnet  
Plastic  
Snap Ring  
Hub  
Motor  
Plastic  
Base Plate  
2 x screws  
Customer  
Shaft  
Note: “This product is not specifically designed or manufactured for use in any specific device. Customers are solely responsible for determining  
the suitability of this product for its intended application and solely liable for all loss, damage, expense or liability in connection with such use.”  
[1]  
Device Selection Guide  
Part Number  
AEAT-6012  
Resolution (bit)  
Operating Temperature (°C)  
-40 to +125  
Output Communication  
DC Supply Voltage (V), V  
DD  
12  
10  
Serial  
Serial  
+5.0  
+5.0  
AEAT-6010  
-40 to +125  
Notes:  
1. For other options of Magnetic Encoder, please refer to factory.  
[1, 2]  
Table 1. Absolute Maximum Ratings  
Parameter  
Symbol  
Limits  
Units  
Notes  
DC Supply Voltage at pin V = 5V  
V
DD  
-0.3 to + 7  
V
DD  
Input Voltage  
V
-0.3 to VDD+0.3  
-40 to 125  
V
i
Storage Temperature  
T
STG  
°C  
Notes:  
1. Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is stress rating only and  
functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not  
implied.  
2. Exposure to absolute maximum rating conditions for extended periods may affect reliability.  
Table 2. Recommended Operating Condition  
Parameter  
Symbol  
Values  
Units  
V
Notes  
DC Supply Voltage at pin V = 5V  
V
DD  
+4.5 / +5.5  
–40 to +125  
≤1  
DD  
Ambient Temperature  
T
amb  
°C  
Maximum Read-out Frequency  
f
MHz  
>0 MHz  
CLK  
Table 3. DC Characteristics  
DC Characteristics over Recommended Operating Range, typical at 25 °C  
Values  
Typ.  
16  
Parameter  
Symbol Condition  
Min  
V -0.5  
Max  
Units  
Notes  
VDD Supply Current  
I
DD  
20  
mA  
V
Output High Voltage D0  
Output Low Voltage D0  
Output Current D0  
V
OH  
V
OL  
DD  
V +0.4  
SS  
V
I
O
4
mA  
V pin = 4.5V  
DD  
Input High Voltage CLK, CSn  
Input Low Voltage CLK, CSn  
V
0.7*V  
1
IH  
IL  
DD  
V
0.3*V  
DD  
Notes:  
1. CSn is internal pull-up.  
2
Table 4. Timing Characteristics  
Timing Characteristics over Recommended Operating Range, typical at 25 °C  
Values  
Typ.  
Parameter  
Symbol  
Condition  
Min  
Max  
Units  
ns  
Notes  
Data output activated (logic high)  
First data shifted to output register  
Start of data output  
T
100  
2
3
4
5
6
7
8
DO active  
t
500  
500  
ns  
CLK FE  
T
ns  
CLK/2  
Data output valid  
T
T
375  
100  
ns  
DO valid  
Data output tristate  
ns  
DO tristate  
Pulse width of CSn  
T
500  
9.9  
ns  
CSn  
abs  
Sampling rate for absolute output  
f
10.42  
10.94  
kHz  
Notes:  
2. Time between falling edge of CSn and data output activated  
3. Time between falling edge of CSn and first falling edge of CꢀK  
4. Rising edge of CꢀK shifts out one bit a time  
5. Time between rising edge of CꢀK and data output valid  
6. After the last bit DO changes back to “tristate”  
7. CSn=high; To initiate read-out of next angular position  
8. Internal sampling rate.  
Package Dimensions  
Parameters  
No.  
Parameter  
Value  
1
2
3
4
5
6
7
8
Operating Temp(˚C)  
- 40 to +125  
0.08  
Shaft axial play (mm)  
Shaft TIR (mm)  
0.05  
Mechanical speed (rpm)  
Shaft diameter (mm)  
Moment inertia (g-cm^2)  
Shaft length – (mm)  
Mounting screw size (mm)  
12,000  
6 + 0 / -0.01  
0.104  
8.5 1.0  
M2 x 0.4 x 4  
(socket head cap screw,  
head Ø3.8 0.18 mm)  
23mm  
9
Recommended screw torque  
0.6 lb.inch  
19mm  
10  
11  
Encoder base plate thickness (mm)  
Bolt circle  
2
0.13  
*
Note:- For high temperature application, it is highly recommended  
that adhesive be applied at least to the screw and the base plate  
interface. Refer Application Note for further details.  
Ø 23mm  
Base Plate  
Screw Mounting  
17  
Figure 1. Package and recommended mounting dimension  
3
Timing Characteristics  
CS  
t CS  
t CLKFE  
TCLK/2  
t CLKFE  
10  
1
CLK  
DO  
1
D9  
D8  
D7  
D6  
D5  
D4  
D3  
D2  
D1  
D0  
D9  
tDO active  
t DO valid  
tDO Tristate  
Positional Data Bits  
Notes:  
1. Please refer to Table 4 for Timing Characteristics.  
2. For 12 bits version; the Positional Data Bits will start with D11 instead and end at D0.  
Figure 2. Timing Diagram for 10 bit Magnetic Encoder  
Electrical Connections  
VDD  
Vss  
DO  
Pin Symbol Description  
1
2
3
4
5
VDD  
CSn  
VSS  
CLK  
DO  
5V Supply Voltage  
Chip Select – Input (See Figure 2)  
Supply Ground  
Serial Clock - Input (See Figure 2)  
CLK  
CSn  
Serial Data - Output. (See Figure 2)  
Figure 3. Electrical Connections  
22.6  
3.6  
8.4  
1.25  
Figure 4. Basic connector dimensions  
For product information and a complete list of distributors, please go to our web site: www.avagotech.com  
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.  
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved.  
AV02-0188EN - March 20, 2007  

AEAT-6010 相关器件

型号 制造商 描述 价格 文档
AEAT-6010-A06 AVAGO 10 or 12 bit Angular Detection Device Contactless sensing technologies 获取价格
AEAT-6010_11 AVAGO 10 or 12 bit Angular Detection Device Contactless sensing technologies 获取价格
AEAT-6012 AVAGO 10 or 12 bit Angular Detection Device 获取价格
AEAT-6012-A06 AVAGO 10 or 12 bit Angular Detection Device Contactless sensing technologies 获取价格
AEAT-601B AVAGO Incremental Magnetic Encoder Contactless sensing technology 获取价格
AEAT-601B-F06 AVAGO ROTARY OPTICAL POSITION ENCODER, ROHS COMPLIANT PACKAGE-5 获取价格
AEAT-6600-T16 AVAGO 10 to16-Bit Programmable Angular Magnetic Encoder IC 获取价格
AEAT-84AD-LBSC0 AVAGO SINGLE, 3 CHANNELS, ROTARY OPTICAL POSITION ENCODER 获取价格
AEAT-84AD-LBSF0 AVAGO SINGLE, 3 CHANNELS, ROTARY OPTICAL POSITION ENCODER 获取价格
AEAT-86AD AVAGO Operating speeds up to 12,000 rpm 获取价格
Hi,有什么可以帮您? 在线客服 或 微信扫码咨询