HDSM-541H [AVAGO]
7 SEG NUMERIC DISPLAY, GREEN, 14.22mm, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-10;
| 型号： | HDSM-541H |
| 厂家： | 
AVAGO TECHNOLOGIES LIMITED |
| 描述： | 7 SEG NUMERIC DISPLAY, GREEN, 14.22mm, ROHS COMPLIANT, SURFACE MOUNT PACKAGE-10 光电 |
| 文件： | 总6页 (文件大小：163K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HDSM-541B/543B
0.56inch (14.0mm)
Dual digit surface mount LED display
Data Sheet
Description
Features
This is 0.56 inch (14.0mm) height dual digit display. This ꢀ 0.56”digit height
device utilizes InGaN/SiC blue LED chips. This device
comes with gray top surface and white segments.
ꢀ Low current operation
ꢀ Excellent characters appearance
Ordering Information
ꢀ Available in CA and CC
ꢀ 500 pieces per reel
Blue
Description
HDSM-541B
HDSM- 543B
Common Anode, Right Hand Decimal
Common Cathode, Right Hand Decimal
ꢀ Moisture Sensitivity Level: Level 3
ꢀ RoHS compliant
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance are 0.25 mm (0.01”) unless otherwise noted.
CAUTION: LEDs are Class 1A ESD sensitive per JESD22-A114C.01.
Please observe appropriate precautions during handling and processing.
Pin Connection (Common Anode)
Pin Connection (Common Cathode)
Pin No.
Connection
Pin No.
Connection
1
2
3
4
5
6
7
8
9
10
CATHODE G
1
ANODE G
CATHODE DP
CATHODE A
2
ANODE DP
3
ANODE A
CATHODE F
4
ANODE F
COMMON ANODE DIG2
CATHODE D
5
COMMON CATHODE DIG2
ANODE D
6
CATHODE E
7
ANODE E
CATHODE C
8
ANODE C
CATHODE B
9
ANODE B
COMMON ANODE DIG1
10
COMMON CATHODE DIG1
Internal Circuit Diagram (Common Anode)
Internal Circuit Diagram (Common Cathode)
2
Absolute Maximum Ratings @ T =25°C
A
Parameter
Blue
100
80
Unit
mW
mA
Power Dissipation Per Segment
Peak Forward Current Per Segment
(1/10 Duty Cycle., 0.1ms pulse width)
Continuous Forward Current Per Segment
Derating Linearly From 25°C Per Segment
25
0.25
5
mA
mA/°C
V
Reverse Voltage Per Segment
Operating Temperature Range
Storage Temperature Range
-40°C to+105°C
-40°C to+105°C
Caution in ESD: Static Electricity and surge damages the LED. It is recommend to use a wrist strap or anti-electrostatic
glove when handing the LED. All devices, equipment and machinery must be properly grounded.
Electrical / Optical Characteristics @ T =25°C
A
Blue
Parameter
Symbol
IV
Min.
5.4
–
Typ.
13.5
462/470
26
Max.
–
Unit
mcd
nm
nm
V
Test Condition
IF = 10 mA
IF = 20 mA
IF = 20 mA
IF = 20 mA
VR = 5 V
Average Luminous Intensity
Emission Wavelength
ꢁp/ꢁd
ꢂꢁ
–
Spectral Line Half-Width
Forward Voltage, Per Segment
Reverse Current, Per Segment
Luminous Intensity Matching Ratio
–
–
VF
–
3.3
4.0
100
2:1
IR
–
–
ꢃA
–
IV-m
–
–
IF = 10 mA
3
Typical Electrical / Optical characteristic Curves @ T =25°C
A
Blue
B
B
1.0
40
30
20
10
0
0.5
0
400
1.0
2.0
3.0
4.0
5.0
6.0
450
500
550
600
650
700
Wavelength
Forward Voltage (V)
Figure 1. Relative Luminous Intensity vs. Wavelength
Figure 2. Forward Current vs. Forward Voltage
4
3
2
1
0
40
30
B
B
20
10
0
0
10 20
100 110
0
5
30 40 50 60 70 80 90
Ambient Temperature (°C)
10 15 20 25 30 35 40 45 50
Forward Current (mA)
Figure 3. Allowable DC Current vs. Ambient Temperature
Figure 4. Relative Intensity vs. Forward Current
4
Intensity Bin Limit (mcd)
Blue
Iv Bin Category
Min
Max
M
N
P
5.401
8.601
13.701
21.801
8.600
13.700
21.800
34.700
Q
Tolerance +/-15%
Note:
1. Bin categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago
representative for information on currently available bins.
SMT Soldering Profile
Recommended Soldering Pattern (unit: mm)
Pb free reflow soldering Profile
2
10 - 30 SEC.
245°C
3°C/SEC. MAX.
217°C
200°C
6°C/SEC. MAX.
150°C
16
3°C/SEC. MAX.
100 SEC. MAX.
60 - 120 SEC.
3
TIME
(Acc. to J-STD-020C)
Notes:
1. The peak temperature refers to the peak package body temperature.
2. Number of reflow process shall be limited to maximum 2 times only.
Cooling process to normal temperature is required between first and
second soldering process.
2.54 x 4 = 10.16
Recommended stencil window opening is 80%
5
Tape Specification (unit: mm)
4.0
4
0.1
2.4 0.1
0.35
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-1588EN - March 17, 2011
相关型号：
HDSM-541L
The HDSM-541x/543x is a dual digit display of 0.56â (14.22mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments.
AVAGO
HDSM-543C
The HDSM-541x/543x is a dual digit display of 0.56â (14.22mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments.
AVAGO
HDSM-543H
The HDSM-541x/543x is a dual digit display of 0.56â (14.22mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments.
AVAGO
HDSM-543L
The HDSM-541x/543x is a dual digit display of 0.56â (14.22mm) height. This device utilizes AlInGaP / GaAs chips and has a grey top surface with white segments.
AVAGO
©2020 ICPDF网 联系我们和版权申明