HDSP-316G-II400 [AVAGO]
7 SEG NUMERIC DISPLAY, GREEN, 10mm, PLASTIC PACKAGE-10;型号: | HDSP-316G-II400 |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | 7 SEG NUMERIC DISPLAY, GREEN, 10mm, PLASTIC PACKAGE-10 光电 |
文件: | 总9页 (文件大小:290K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HDSP-315x/316x/515x/516x Series
10 mm and 13 mm Slim Font Seven Segment Displays
Data Sheet
Description
Features
The HDSP-31xx-±1xx Series of displays incorporates a new
slim font character design. This slim font features narrow
width, specially mitered segments to give a fuller appear-
ance to the illuminated character. Faces of these displays
are painted a neutral gray for enhanced on/off contrast.
•ꢀ Excellent appearance
•ꢀ Slim font design
•ꢀ Mitered corners, evenly illuminated segments
•ꢀ Gray face for optimum on/off contrast
•ꢀ Choice of colors: DH AlGaAs red, High Efficiency Red
All devices are available in either common anode or
common cathode configuration with right hand decimal
point. Low current versions are available in either AlGaAs
red or HER.
(HER), yellow, and green
•ꢀ Low current available, AlGaAs red and HER choice of
character size: 10 mm and 13 mm
•ꢀ ±±0ꢀ viewing angle
•ꢀ Characterized for luminous intensity
Devices
AlGaAs
Red Low
Current
HDSP-
HER
Std.
Current
HDSP-
HER
Low
Current
HDSP-
Yellow
Std.
Current
HDSP-
Green
Std.
Current
HDSP-
Package
Drawing
Description
31±H
316H
±1±H
±16H
31±E
316E
±1±E
±16E
31±L
316L
±1±L
±16L
31±Y
316Y
±1±Y
±16Y
31±G
316G
±1±G
±16G
Common Anode,
10 mm Display
A
B
A
B
Common Cathode,
10 mm Display
Common Anode,
13 mm Display
Common Cathode,
13 mm Display
Part Numbering System
±082 - X X X X-X X X X X
HDSP - X X X X-X X X X X
[1]
Mechanical Options
00: No Mechanical Option
[1,2]
Color Bin Options
0: No Color Bin Limitation
[1,2]
Maximum Intensity Bin
0: No Maximum Intensity Bin Limitation
[1,2]
Minimum Intensity Bin
0: No Minimum Intensity Bin Limitation
[1]
Device Configuration/Color
H: AlGaAs Red
E: High Efficiency Red
G: Green
Y: Yellow
[1]
Device Specific Configuration
Refer to Respective Datasheet
[1]
Package
Refer to Respective Datasheet
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or
contact your nearest Avago representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically
restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet
for specific bin limit information.
2
HDSP-315x/316x Series
LUMINOUS
INTENSITY
CATEGORY
COLOR BIN (NOTE 3)
2.ꢀ4 0.3ꢁ
6
10°
0.9
a
1
2
3
4
ꢀ
10
9
f
b
ꢁ
g
12.ꢁ
0.2
4 x 2.ꢀ4
10
7
6
e
c
DP
d
0.ꢀ3
0.0ꢀ
DIA. 1.2
PIN FUNCTION
6.4
0.1
7
0.1
9.7 0.1
1
2
3
4
ꢀ
6
7
ꢁ
9
10
g
f
DATE
CODE
Common A/C
e
d
10.4 MIN.
DP
c
Common A/C
b
a
0.3 0.0ꢀ
7.62
0.3ꢁ
HDSP-515x/516x Series
LUMINOUS
INꢀENSIꢀT
CAꢀEGORT
7.40
10°
COLOR BIN (NOꢀE 3)
2.54 0.38
10 9 8 7 6
a
1.25
13.0
f
b
DAꢀE
g
+ 0.3
17.50
CODE
15.24 0.3
– 0.1
e
c
d
DY
0.29 0.08 ꢀTY.
3.60 0.3
6.40
1 2 3 4 5
YIN FUNCꢀION
DIA. 1.25
5.08
12.25 0.15
0.1
7.00
0.1
1
e
d
2
3
Common A/C
4
c
5
DY
6
b
7
a
8
Common A/C
9
f
g
1.04 0.3 ꢀTY.
2.54 0.3 ꢀTY.
10
0.38 0.08
Notes:
1. Package dimensions in millimeters.
2. Untoleranced dimensions are for reference only.
3. For yellow and green devices only.
3
Absolute Maximum Ratings
Description
AlGaAs
Red Low
Current
HER
Low
Current
HER
Yellow
Green
Units
Average Power per
Segment or DP
37
10±
±2
10±
10±
mW
Peak Forward Current
per Segment or DP
4±
90[2]
30[3]
4±
90[±]
30[6]
90[7]
30[8]
mA
mA
DC Forward Current
per Segment or DP
1±[1]
-20 to 100
1±[4]
Operating Temperature Range
Storage Temperature Range
-40 to +100
ꢀC
ꢀC
V
-40 to +100
3.0
Reverse Voltage per
Segment or DP
Wavesoldering Temperature
2±0
ꢀC
for 3 seconds 1.±9 mm below body
Notes:
1. Derate above 91ꢀC at 0.±3 mA/ꢀC.
2. See Figure 9 to establish pulsed conditions.
3. Derate above ±3ꢀC at 0.4± mA/ꢀC.
4. Derate above 80ꢀC at 0.38 mA/ꢀC.
±. See Figure 10 to establish pulsed conditions.
6. Derate above 81ꢀC at 0.±2 mA/ꢀC.
7. See Figure 11 to establish pulsed ocnditions.
8. Derate above 39ꢀC at 0.37 mA/ꢀC.
Electrical/Optical Characteristics at T = 25°C
A
AlGaAs Red Low Current
Device Series
HDSP-
Test
Conditions
Parameter
Symbol
Min.
Typ.
Max.
Units
31±/316H
±1±/±16H
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
180
6±0
µcd
IF = 1 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
VF
1.8
2.2
V
IF = 1 mA
λPEAK
λd
64±
637
1±
nm
nm
V
VR
3
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
2±±
ꢀC/W/Seg
HER
Device Series
HDSP-
Test
Conditions
Parameter
Symbol
Min.
Typ.
Max.
Units
31±/316E
±1±/±16E
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
4±0
2600
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
VF
1.9
2.±
V
Peak Wavelength
λPEAK
λd
63±
626
30
nm
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
nm
VR
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
ꢀC/W/Seg
4
HER Low Current
Device Series
Test
Conditions
HDSP-
Parameter
Symbol
Min.
Typ.
Max.
Units
31±/316L
±1±/±16L
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
180
370
µcd
IF = 2 mA
IF = 2 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
VF
2.1
2.±
V
λPEAK
λd
63±
626
30
nm
nm
VR
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
ꢀC/W/Seg
Yellow
Device Series
HDSP-
Test
Conditions
Parameter
Symbol
Min.
Typ.
Max.
Units
31±/316Y
±1±/±16Y
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
4±0
1800
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
VF
2.0
2.±
V
Peak Wavelength
λPEAK
λd
±83
±86
±0
nm
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
nm
VR
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
ꢀC/W/Seg
Green
Device Series
HDSP-
Test
Conditions
Parameter
Symbol
Min.
Typ.
Max.
Units
31±/316G
±1±/±16G
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
4±0
±000
µcd
IF = 10 mA
IF = 10 mA
Forward Voltage/Segment or DP
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
VF
2.1
2.±
V
λPEAK
λd
±66
±71
±0
nm
nm
VR
3
V
IR = 100 µA
Thermal Resistance LED
Junction-to-Pin
RθJ-PIN
200
ꢀC/W/Seg
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 2±ꢀC.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λ is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
±
AlGaAs Low Current
50.0
20.0
20
18
16
14
12
10
8
RθJ-A = 770°C/W
10.0
5.0
2.0
1.0
0.5
6
4
2
0
0.1
20 30 40 50 60 70 80 90 100 110 120
TA – AMBIENT TEMPERATURE – °C
0
0.5
1.0
1.5
2.0
2.5
VF – FORWARD VOLTAGE - V
Figure 1. Maximum allowable average or DC current vs. ambient temperature.
Figure 2. Forward current vs. forward voltage.
20
10
5
2
1
0.5
0.2
0.1
0.1
0.2
0.5
1
2
5
10
20
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 3. Relative luminous intensity vs DC forward current.
6
HER, Yellow, and Green
100
100
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF IDC
MAXIMUM
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
DERATING OF IDC
MAXIMUM
10
10
1
10 KHZ 3 KHz
10 KHZ 3 KHz
1 KHz 300 Hz
1 KHz 300 Hz
100 Hz
100 Hz
1
DC OPERATION
DC OPERATION
1
10
100
1000 10000
1
10
100
1000 10000
tp – PULSE DURATION – µs
tp – PULSE DURATION – µs
Figure 5. Maximum tolerable peak current vs. pulse duration – Yellow.
Figure 4. Maximum tolerable peak current vs. pulse duration – HER.
50
100
OPERATION IN THIS
R¸ J-A = 770°C/W
45
40
35
REGION REQUIRES
TEMPERATURE
DERATING OF IDC
MAXIMUM
30
HER
25
20
10
1
GREEN
YELLOW
15
10
100 Hz
10 KHZ 3 KHz
1 KHz 300 Hz
5
0
DC OPERATION
90 100 110 120
20 30 40 50 60 70 80
TA – AMBIENT TEMPERATURE – °C
1
10
100
1000 10000
tp – PULSE DURATION – µs
Figure 6. Allowable peak current vs. pulse duration – Green.
Figure 7. Maximum allowable DC current per segment as a function of
ambient temperature.
100
80
12
10
HER
8
6
60
YELLOW
YELLOW
40
20
0
HER
4
GREEN
2
0
GREEN
3.0
0
1.0
2.0
4.0
5.0
0
5
10
15
20
25
30
IF – FORWARD CURRENT PER SEGMENT – mA
VF – FORWARD VOLTAGE – V
Figure 8. Forward current vs. forward voltage characteristics.
Figure 9. Relative luminous intensity vs. DC forward current.
7
HER Low Current
50
40
30
20
10
20
RθJ-A = 770°C/W
18
16
14
12
10
8
HER
HER
6
4
2
0
0
0
0.5
1.0
1.5
2.0
2.5
3.0
20 30 40 50 60 70 80 90 100 110 120
TA – AMBIENT TEMPERATURE – °C
VF – FORWARD VOLTAGE - V
Figure 11. Forward current vs. forward voltage.
Figure 10. Maximum allowable average or DC current vs. ambient
temperature.
16
14
12
10
HER
8
6
4
2
0
0
2
4
6
8
10 12
14 16
VF – FORWARD CURRENT PER SEGMENT – mA
Figure 12. Relative luminous intensity vs. DC forward current.
8
Intensity Bin Limits (mcd)
HER Low Current, AlGaAs Red Low Current
HDSP-31xL/H, HDSP-51xL/H
Color Categories
Dominant Wavelength (nm)
IV Bin Category
Min.
Max.
Color
Bin
Min.
Max.
E
0.180
0.280
0.4±0
0.700
1.100
1.800
2.800
4.±00
7.000
0.360
0.±60
0.900
1.400
2.200
3.600
±.600
9.000
1±.000
Yellow
1
3
2
4
2
3
4
±
±81.±0
±84.00
±86.±0
±89.00
±73.00
±70.00
±67.00
±64.00
±8±.00
±87.±0
±90.00
±92.±0
±77.00
±74.00
±71.00
±68.00
F
G
H
I
Green
K
L
M
N
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your local Avago
representatives for further clarification/information.
HER Std. Current, Green Std. Current, Yellow Std. Current
HDSP-31xE/G/Y, HDSP-51xE/G/Y
IV Bin Category
Min.
Max.
G
H
I
0.4±0
0.700
1.100
1.800
2.800
4.±00
7.000
0.900
1.400
2.200
3.600
±.600
9.000
1±.000
K
L
M
N
Electrical/Optical
Soldering/Cleaning
For more information on electrical/optical characteristics, Cleaning agents from the ketone family (acetone, methyl
please see Application Note 100±.
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloroethylene, carbon
tetrachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
Contrast Enhancement
For information on contrast enhancement, please see
Application Note 101±.
For further information on soldering LEDs, please refer to
Application Note 1027.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved. Obsoletes 5989-2640EN
AV02-1769EN - March 28, 2011
相关型号:
©2020 ICPDF网 联系我们和版权申明