HDSP-5703-GJ400
更新时间：2024-10-29 23:40:23
品牌：AVAGO
描述：SIGN DISPLAY, YELLOW, 14.22mm, 0.560 INCH, PLASTIC, DIP-10
概述
数据手册HDSP-5703-GJ400 概述
SIGN DISPLAY, YELLOW, 14.22mm, 0.560 INCH, PLASTIC, DIP-10
HDSP-5703-GJ400 数据手册
通过下载HDSP-5703-GJ400数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载HDSP Series
14.2 mm (0.56 inch)
Seven Segment Displays
Data Sheet
HDSP-K40x, HDSP-550x, HDSP-552x, HDSP-560x,
HDSP-562x, HDSP-570x, HDSP-572x, HDSP-H15x,
HDSP-H40x Series
Description
Features
The 14.2 mm (0.56 inch) LED seven segment displays are
designed for viewing distances up to 7 metres (23 feet).
These devices use an industry standard size package and
pinout. Boththenumericand 1overflowdevicesfeaturea
right hand decimal point. All devices are available as either
common anode or common cathode.
ꢂ Industry Standard Size
ꢂ Industry Standard Pinout
15.24 mm (0.6 in.) DIP Leads on 2.54 mm (0.1 in.) Cen-
ters
ꢂ Choice of Colors
AlGaAs Red, High Efficiency Red, Yellow, Green, ꢀrange
ꢂ Excellent Appearance
These displays are ideal for most applications. Pin for pin
IFAVG DATA SHEET = 10 mA
Evenly Lighted Segments
ꢀ
Peak = 1.3
Mitered Corners on Segments
Gray Package Gives ꢀptimum Contrast
50ꢁ Viewing Angle
IV DATA SHEET = 2800 ꢁcd
Therefore
ꢂ Design Flexibility
Common Anode or Common Cathode
Single and Dual Digits
IvAVG = (10 mA/10 mA)
(1.3)(2800 ꢁcd)
= 3640 ꢁcd
Right Hand Decimal Point
1. ꢀverflow Character
ꢂ Categorized for Luminous Intensity
Yellow and Green Categorized for Color
Use of Like Categories Yields a Uniform Display
ꢂ High Light ꢀutput
ꢂ High Peak Current
ꢂ Excellent for Long Digit String Multiplexing
ꢂ Intensity and Color Selection ꢀption
See Intensity and Color Selected Displays Data Sheet
ꢂ Sunlight Viewable AlGaAs
Devices
Orange
HDSP-
AlGaAs Red
HDSP-[1]
HER
Yellow
HDSP-
Green
HDSP-
Package
Drawing
HDSP-[1]
Description
H401
H403
H151
H153
H157
H158
5501
5503
5507
5508
5521
5523
5701
5703
5707
5708
5721
5723
5601
5603
5607
5608
5621
5623
Common Anode Right Hand Decimal
Common Cathode Right Hand Decimal
Common Anode 1. ꢀverflow
A
B
C
D
E
Common Cathode 1. ꢀverflow
K401
K403
Two Digit Common Anode Right Hand Decimal
Two Digit Common Cathode Right Hand Decimal
F
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-H10X/K12X AlGaAs and HDSP-555X HER data sheet
for low current operation.
Contrast Enhancement
Mechanical
The objective of contrast enhancement is to provide good Specially developed plastics are used to optimize the
display readability in the end use ambient light. The con- displays optical performance. These plastics restrict the
cept is to employ both luminance and chrominance con- solvents that may be used for cleaning. ꢀnly mixtures of
trast techniques to enhance the readability. This is accom- Freon (F113) and alcohol should be used for vapor clean-
plished by having the ꢀFF dots blend into the display ing processes. Total immersion time in the vapors is two
background and the ꢀN dots stand out vividly against this
same background. Therefore, these display devices are as-
minutes. Some suggested mixtures are Freon TE, Arklone
A or K, or Genesolv DI-15 or DE-15. A 60ꢁC (140ꢁF) water
sembled with a gray package and matching encapsulat- cleaning process may also be used. This process includes
ing epoxy in the dots.
a neutralizer rinse (3% ammonia solution or equivalent),
a surfactant rinse (1% detergent solution or equivalent),
a water rinse, and a thorough air dry. Room temperature
cleaning may be done with Freon T-E35 or T-P35, Ethanol,
Isopropanol, or water with a mild detergent.
Contrast enhancement may be achieved by using one of
the following suggested filters:
Standard Red and AlGaAs Red (HDSP-5300/H150)
Panelgraphic RUBY RED 60
SGL-Homalite H100-1605 RED
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloroethylene, carbon tet-
rachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
3M Louvered Filter R6610 RED or N0210 GRAY
HER (HDSP-5500)
Panelgraphic SCARLET RED 60
SGL-Homalite H100-1670 RED or H100-1250 GRAY
3M Louvered Filter R6610 RED or N0210 GRAY
Yellow (HDSP-5700)
Panelgraphic YELLꢀW 27 or GRAY 10
SGL-Homalite H100-1720 AMBER or H100-1250 GRAY
3M Louvered Filter A5910 AMBER or N0210 GRAY
Green (HDSP-5600)
Panelgraphic GREEN 48
SGL-Homalite H100-1440 GREEN or H100-1250 GRAY
3M Louvered Filter YG6610 RED or N0210 GRAY
For further information on contrast enhancement please
see Application Note 1015.
2
These displays are ideal for most applications. Pin for pin
equivalentdisplaysarealsoavailableinalowcurrentdesign.
The low current displays are ideal for portable applications.
For additional information see the Low Current Seven Seg-
ment Displays data sheet.
Part Numbering System
5 0 8 2 - X X X X - X X X X X
H D S P - X X X X - X X X X X
Mechanical Options[1]
00: No Mechanical ꢀption
Color Bin Options[1,2]
0: No Color Bin Limitation
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
1: Common Anode
3: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
H: 14.2 mm (0.56 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Avago rep-
resentative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per
tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
3
Package Dimensions
FUNCTION
D
PIN
1
A
B
C
E
F
CATHODE e
CATHODE d
ANODE[3]
ANODE e
ANODE d
CATHODE[4]
ANODE c
ANODE DP
ANODE b
ANODE a
CATHODE[4]
ANODE f
ANODE g
CATHODE c
ANODE c, d
CATHODE b
ANODE a, b, DP
CATHOPDE DP
CATHODE a
ANODE a, b, DP
ANODE c, d
CATHODE d
NO PIN
ANODE c
E CATHODE NO. 1
D CATHODE NO. 1
C CATHODE NO. 1
DP CATHODE NO. 1
E CATHODE NO. 2
D CATHODE NO. 2
G CATHODE NO. 2
C CATHODE NO. 2
DP CATHODE NO. 2
B CATHODE NO. 2
A CATHODE NO. 2
F CATHODE NO. 2
DIGIT NO. 2 ANODE
DIGIT NO. 1 ANODE
B CATHODE NO. 1
A CATHODE NO. 1
G CATHODE NO. 1
F CATHODE NO. 1
E ANODE NO. 1
D ANODE NO. 1
C ANODE NO. 1
DP ANODE NO. 1
E ANODE NO. 2
D ANODE NO. 2
G ANODE NO. 2
C ANODE NO. 2
DP ANODE NO. 2
B ANODE NO. 2
A ANODE NO. 2
F ANODE NO. 2
DIGIT NO. 2 CATHODE
DIGIT NO. 1 CATHODE
B ANODE NO. 1
A ANODE NO. 1
G ANODE NO. 1
F ANODE NO. 1
2
CATHODE c, d
ANODE b
3
4
CATHODE c
CATHODE DP
CATHODE b
CATHODE a
ANODE[3]
CATHODE a, b, DP
ANODE DE
ANODE a
5
6
7
CATHODE a, b, DP
CATHODE c, d
ANODE d
8
9
CATHODE f
CATHODE g
10
11
12
13
14
15
16
17
18
NO PIN
NꢀTES:
1. ALL DIMENSIꢀNS IN MILLIMETRES (INCHES).
2. ALL UNTꢀLERANCED DIMENSIꢀNS ARE FꢀR REFERENCE ꢀNLY.
3. REDUNDANT ANꢀDES.
4. REDUNDANT CATHꢀDES.
5. FꢀR HDSP-5600/-5700 SERIES PRꢀDUCT ꢀNLY.
4
Internal Circuit Diagram
Absolute Maximum Ratings
HER/Orange
HDSP-5500
HDSP-H40x
HDSP-K40x
Series
AlGaAs Red
HDSP-H150
Series
Yellow
HDSP-5700
Series
Green
HDSP-5600
Series
Description
Units
mW
mA
Average Power per Segment or DP
96
105
90[3]
80
105
90[7]
Peak Forward Current per
Segment or DP
160[1]
60[5]
DC Forward Current per Segment or DP
ꢀperating Temperature Range
Storage Temperature Range
40[2]
30[4]
20[6]
3018]
mA
ꢁC
ꢁC
V
-20 to +100[9]
-40 to +100
-55 to +100
Reverse Voltage per Segment or DP
3.0
Wavesoldering Temperature for 3 Seconds
(1.60 mm [0.063 in.] below body)
250
ꢁC
Notes:
1. See Figure 2 to establish pulsed conditions.
2. Derate above 46ꢁC at 0.54 mA/ꢁC.
3. See Figure 7 to establish pulsed conditions.
4. Derate above 53ꢁC at 0.45 mA/ꢁC.
5. See Figure 8 to establish pulsed conditions.
6. Derate above 81ꢁC at 0.52 mA/ꢁC.
7. See Figure 9 to establish pulsed conditions.
8. Derate above 39ꢁC at 0.37 mA/ꢁC.
9. For operation below -20ꢁC, contact your local Avago
components sales office or an authorized distributor.
5
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ. Max.
Units Test Conditions
Luminous Intensity/Segment[1,2,5]
(Digit Average)
IV
9.1
16.0
mcd
IF = 20 mA
1.8
IF = 20 mA
Forward Voltage/Segment or DP
VF
V
2.0
3.0
IF = 100 mA
H15X
Peak Wavelength
ꢃPEAK
ꢃd
645
637
15
nm
nm
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
VR
3.0
V
IR = 100 μA
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
-2
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RꢄJ-Pin
400
ꢁC/W/
Seg
High Efficiency Red
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ. Max.
Units Test Conditions
900
2800
IF = 10 mA
μcd
Luminous Intensity/Segment[1,2,6]
(Digit Average)
IV
3700
IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP
VF
2.1
2.5
V
IF = 20 mA
55XX
Peak Wavelength
ꢃPEAK
ꢃd
635
626
30
nm
nm
Dominant Wavelength[3]
Reverse Voltage/Segment or DP[4]
VR
3.0
V
IR = 100 μA
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
-2
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RꢄJ-Pin
345
ꢁC/W/
Seg
6
Yellow
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ. Max.
Units Test Conditions
600
1800
IF = 10 mA
μcd
Luminous Intensity/Segment[1,2]
(Digit Average)
IV
2750
IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP
VF
2.1
2.5
V
IF = 20 mA
57XX
Peak Wavelength
ꢃPEAK
ꢃd
583
nm
nm
Dominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]
581.5
3.0
586 592.5
VR
40
-2
V
IR = 100 μA
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RꢄJ-Pin
345
ꢁC/W/
Seg
Orange
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ. Max.
Units Test Conditions
Luminous Intensity/Segment
(Segment Average)[1,2]
IV
2.37
mcd
IF = 10 mA
Forward Voltage/Segment or DP
VF
ꢃPEAK
ꢃd
2.1
600
603
30
2.5
V
nm
nm
V
IF = 20 mA
Peak Wavelength
H40x
K40x
Dominant Wavelength[3]
IF = 10 mA
IR = 100 μA
Reverse Voltage/Segment or DP[4]
VR
3.0
Temperature Coefficient of
VF/Segment or DP
∆VF/ꢁC
-2
mV/ꢁC
Thermal Resistance LED Junction-
to-Pin
RꢄJ-Pin
345
ꢁC/W/
Seg
7
High Performance Green
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ. Max.
Units Test Conditions
900
2500
IF = 10 mA
μcd
Luminous Intensity/Segment[1,2]
(Digit Average)`
IV
3100
IF = 60 mA Peak:
1 of 6 df
Forward Voltage/Segment or DP
VF
2.1
2.5
V
IF = 10 mA
56XX
Peak Wavelength
ꢃPEAK
ꢃd
566
571
50
nm
nm
Dominant Wavelength[3,7]
Reverse Voltage/Segment or DP[4]
577
VR
3.0
V
IR = 100 μA
Temperature Coefficient of
VF/Segment or DP
∆V /ꢁC
-2
mV/ꢁC
F
Thermal Resistance LED Junction-
to-Pin
RꢄJ-Pin
345
ꢁC/W/
Seg
Notes:
1. Device case temperature is 25ꢁC prior to the intensity measurement.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, ꢃd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation, the AlGaAs HDSP-H10X series displays are recommended. They are tested at 1 mA dc/segment and are pin for pin
compatible with the HDSP-H15X series.
6. For low current operation, the HER HDSP-555X series displays are recommended. They are tested at 2 mA dc/segment and are pin for pin com-
patible with the HDSP-550X series.
7. The Yellow (HDSP-5700) and Green (HDSP-5600) displays are categorized for dominant wavelength. The category is designated by a number
adjacent to the luminous intensity category letter.
AlGaAs Red
Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – Red.
Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration
– AlGaAs Red.
8
50
45
160
Rθ
J-A
= 770 C/W
140
120
100
80
AlGaAs RED
40
35
30
AlGaAs RED
25
20
15
10
5
60
40
20
0
0
20 30 40 50 60 70 80 90 100 110 120
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
T
– AMBIENT TEMPERATURE –
C
A
V
– FORWARD VOLTAGE – V
F
Figure 3. Maximum Allowable DC Current vs. Ambient Temperature.
Figure 4. Forward Current vs. Forward Voltage.
2.00
1.4
1.2
1.0
1.75
1.50
1.25
1.00
AlGaAs RED
0.75
AlGaAs RED
0.8
0.50
0.25
0
0.6
0
F
5
10
15
20
25
30
35
40
0.5
5.0
50.0 150.0
I
– FORWARD CURRENT PER SEGMENT – mA
I
– PEAK FORWARD CURRENT
PER SEGMENT – mA
PEAK
Figure 5. Relative Luminous Intensity vs. DC Forward Current.
Figure 6. Relative Efficiency (Luminous Intensity per Unit Current)
vs. Peak Current.
HER, Yellow, Green, Orange
Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration – HER,
Orange.
Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration
– Yellow.
9
Figure 9. Maximum Tolerable Peak Current vs.
Pulse Duration – Green.
Figure 10. Maximum Allowable DC Current vs. Ambient
Temperature.
1.6
90
4.0
3.5
3.0
2.5
2.0
1.5
1.0
YELLOW SERIES
1.5
GREEN SERIES
80
HER SERIES,
1.4
1.3
1.2
1.1
1.0
0.9
0.8
70
60
ORANGE SERIES
GREEN SERIES
YELLOW SERIES
50
HER SERIES,
ORANGE
SERIES
40
30
20
10
0
HER, YELLOW,
GREEN, ORANGE
0.7
0.6
0.5
0
0
10 20 30 40 50 60 70 80 90 100
1
2
3
4
5
0
5
10
15
20
25
30
35
40
I
– PEAK FORWARD CURRENT
V
– FORWARD VOLTAGE – V
PEAK
F
I
– DC FORWARD CURRENT – mA
F
Figure 11. Forward Current vs. Forward
Voltage.
Figure 12. Relative Luminous Intensity vs. DC
Forward Current.
Figure 13. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak Current.
Electrical/Optical
For more information on electrical/optical characteristics,
please see Application Note 1005.
Soldering/Cleaning
Cleaning agents from the ketone family (acetone, methyl
ethyl ketone, etc.) and from the chlorinated hydrocarbon
family (methylene chloride, trichloro–ethylene, carbon
tetrachloride, etc.) are not recommended for cleaning LED
parts. All of these various solvents attack or dissolve the
encapsulating epoxies used to form the package of plastic
LED parts.
Contrast Enhancement
For information on contrast enhancement please see Ap-
plication Note 1015.
For information on soldering LEDs please refer to Ap-
plication Note 1027.
Intensity Bin Limits (mcd)
AlGaAs Red
Orange
HDSP-H40x/K40x
HDSP-H15x
IV Bin Category
Min.
0.77
0.95
1.19
1.49
1.85
2.32
2.90
Max.
1.17
1.45
1.82
2.27
2.89
3.54
4.43
IV Bin Category
Min.
9.20
Max.
16.90
25.30
38.00
56.90
85.40
B
C
D
E
K
L
13.80
20.70
31.10
46.60
M
N
ꢀ
F
G
H
HER
HDSP-550x/552x
IV Bin Category
Min.
0.91
1.37
2.05
3.08
4.62
6.93
10.39
Max.
1.67
2.51
3.76
5.64
8.64
12.70
19.04
E
F
G
H
I
Color Categories
Dominant Wavelength (nm)
J
Color
Bin
Min.
Max.
K
Yellow
1
3
2
4
2
3
4
5
581.50
584.00
586.50
589.00
573.00
570.00
567.00
564.00
585.00
587.50
590.00
592.50
577.00
574.00
571.00
568.00
Yellow
HDSP-570x/572x
IV Bin Category
Min.
0.61
0.91
1.37
2.05
3.08
4.62
6.93
10.39
Max.
1.11
1.67
2.51
3.76
5.64
8.64
12.70
19.04
Green
D
E
F
G
H
I
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago repre-
sentatives for further clarification/information.
J
K
Green
HDSP-560x/562x
IV Bin Category
Min.
0.91
1.37
2.05
3.08
4.61
Max.
1.67
2.51
3.76
5.64
8.46
E
F
G
H
I
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2010 Avago Technologies. All rights reserved. Obsoletes 5988-4273EN
AV02-1107EN - January 15, 2010
HDSP-5703-GJ400 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| HDSP-5703-GK000 | AGILENT | 14.2 mm (0.56 inch) Seven Segment Displays | 获取价格 |
|
| HDSP-5703-GK000 | AVAGO | SIGN DISPLAY, YELLOW, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
| HDSP-5703-GK200 | AVAGO | Smart/Normal 7 Seg Numeric LED Display, Yellow, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
| HDSP-5703-GK300 | AVAGO | SIGN DISPLAY, YELLOW, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
| HDSP-5703-GK400 | AVAGO | Smart/Normal 7 Seg Numeric LED Display, Yellow, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
| HDSP-5703-H0000 | AGILENT | 14.2 mm (0.56 inch) Seven Segment Displays | 获取价格 |
|
| HDSP-5703-H0000 | AVAGO | SIGN DISPLAY, YELLOW, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
| HDSP-5703-H0200 | AVAGO | SIGN DISPLAY, YELLOW, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
| HDSP-5703-H0300 | AVAGO | Smart/Normal 7 Seg Numeric LED Display, Yellow, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
| HDSP-5703-H0400 | AVAGO | Smart/Normal 7 Seg Numeric LED Display, Yellow, 14.22mm, 0.560 INCH, PLASTIC, DIP-10 | 获取价格 |
|
HDSP-5703-GJ400 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
