HDSP-863 [AVAGO]

Smart/Normal 7 Seg Numeric LED Display, Yellow;
HDSP-863
型号: HDSP-863
厂家: AVAGO TECHNOLOGIES LIMITED    AVAGO TECHNOLOGIES LIMITED
描述:

Smart/Normal 7 Seg Numeric LED Display, Yellow

文件: 总8页 (文件大小:198K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HDSP-076x Series  
Hexadecimal and Numeric Displays  
for Industrial Applications  
Data Sheet  
HDSP-076x Series, HDSP-077x Series  
HDSP-086x Series, HDSP-096x Series  
Description  
Features  
ꢀ Threeꢀcolors:ꢀ High-efficiencyꢀredꢀ  
Theseꢀsolidꢀstateꢀdisplayꢀdevicesꢀareꢀdesignedꢀandꢀtestedꢀ  
forꢀuseꢀinꢀadverseꢀindustrialꢀenvironments.ꢀTheꢀcharacterꢀ  
heightꢀisꢀ7.4mmꢀ(0.29ꢀinch).ꢀTheꢀnumericꢀandꢀhexadeci-  
Yellowꢀ  
Highꢀperformanceꢀgreen  
malꢀdevicesꢀincorporateꢀanꢀon-boardꢀICꢀthatꢀcontainsꢀtheꢀ ꢀ Twoꢀhigh-efficiencyꢀredꢀoptionsꢀ  
dataꢀmemory,ꢀdecoderꢀandꢀdisplayꢀdriverꢀfunctions.  
–ꢀLowꢀpowerꢀ  
–ꢀHighꢀbrightness  
TheꢀnumericꢀdevicesꢀdecodeꢀpositiveꢀBCDꢀlogicꢀintoꢀchar-  
actersꢀ“0-9,ꢀaꢀ“–sign,ꢀdecimalꢀpoint,ꢀandꢀaꢀtestꢀpattern.ꢀ  
TheꢀhexadecimalꢀdevicesꢀdecodeꢀpositiveꢀBCDꢀlogicꢀintoꢀ  
16ꢀcharacters,0-9,ꢀA-F.”ꢀAnꢀinputꢀisꢀprovidedꢀonꢀtheꢀhexa-  
decimalꢀdevicesꢀtoꢀblankꢀtheꢀdisplayꢀ(allꢀLEDsꢀo)ꢀwithoutꢀ  
losingꢀtheꢀcontentsꢀofꢀtheꢀmemory.  
ꢀ Threeꢀcharacterꢀoptionsꢀ  
–ꢀNumericꢀ  
–ꢀHexadecimalꢀ  
–ꢀOverꢀrange  
ꢀ Performanceꢀguaranteedꢀoverꢀtemperature  
ꢀ Memoryꢀlatch/decoder/driver:ꢀꢀTTLꢀcompatible  
ꢀ 4ꢀxꢀ7ꢀdotꢀmatrixꢀcharacter  
Theꢀ overꢀ rangeꢀ deviceꢀ displays 1”ꢀ andꢀ ꢀ rightꢀ handꢀ  
decimalꢀpointꢀandꢀisꢀtypicallyꢀdrivenꢀviaꢀexternalꢀswitch-  
ingꢀtransistors.  
ꢀ Categorizedꢀforꢀluminousꢀintensity  
ꢀ Yellowꢀandꢀgreenꢀcategorizedꢀforꢀcolor  
Device Selection Guide  
Part  
Typical Applications  
ꢀ Industrialꢀequipment  
ꢀ Computerꢀperipherals  
ꢀ Instrumentation  
Number  
HDSP-  
Front  
View  
Aꢀ  
Bꢀ  
Cꢀ  
D
Color  
Description  
0760ꢀ  
0761ꢀ  
0762ꢀ  
0763ꢀ  
High-Efficiencyꢀ Numeric,ꢀRightꢀHandꢀDPꢀ  
Redꢀ  
LowꢀPowerꢀ  
Numeric,ꢀLeftꢀHandꢀDPꢀ  
Hexadecimalꢀ  
OverꢀRangeꢀ 1ꢀ  
ꢀ Telecommunicationꢀequipment  
0770ꢀ  
0771ꢀ  
0772ꢀ  
High-Efficiencyꢀ Numeric,ꢀRightꢀHandꢀDPꢀ  
Redꢀ Numeric,ꢀLeftꢀHandꢀDPꢀ  
HighꢀBrightnessꢀ Hexadecimalꢀ  
Aꢀ  
Bꢀ  
C
0860ꢀ  
0861ꢀ  
0862ꢀ  
0863ꢀ  
Yellowꢀ  
Numeric,ꢀRightꢀHandꢀDPꢀ  
Numeric,ꢀLeftꢀHandꢀDPꢀ  
Hexadecimalꢀ  
Aꢀ  
Bꢀ  
Cꢀ  
D
OverꢀRangeꢀ 1ꢀ  
0960ꢀ  
0961ꢀ  
0962ꢀ  
0963ꢀ  
Greenꢀ  
Numeric,ꢀRightꢀHandꢀDPꢀ  
Numeric,ꢀLeftꢀHandꢀDPꢀ  
Hexadecimalꢀ  
Aꢀ  
Bꢀ  
Cꢀ  
D
OverꢀRangeꢀ 1ꢀ  
Package Dimensions  
10.2  
(0.400)  
10.2  
(0.400)  
10.2  
MAX.  
MAX.  
MAX.  
(0.400)  
A
B
C
1.5  
1.5  
1.5  
(0.06)  
(0.06)  
(0.06)  
7.4  
(0.29)  
7.4  
(0.29)  
7.4  
(0.29)  
13.5  
(0.53)  
13.5  
(0.53)  
13.5  
(0.53)  
5.6  
5.6  
(0.22)  
(0.22)  
5°  
5°  
5°  
3.0  
(0.12)  
3.6  
(0.14)  
4.8  
(0.19)  
4.8  
(0.19)  
4.8  
(0.19)  
REAR VIEW  
SIDE VIEW  
END VIEW  
5
Z
6
7
8
0-10°  
3.8  
(0.15)  
1.5  
(0.06)  
COLOR  
(3)  
SEATING  
PLANE  
CODE  
X Z  
3.4  
(0.135)  
LUMINOUS  
INTENSITY  
CATEGORY  
SEATING  
PLANE  
15.2  
(0.600)  
10.2  
(0.400)  
HDSP  
XXXX  
YYWW  
DATE CODE  
PIN 1 KEY  
0.3 0.08  
(0.012 0.003)  
1.3  
(0.050)  
0.5 0.08  
TYP.  
TYP.  
TYP.  
(0.020 0.003)  
2.5 0.13  
(0.10 0.005)  
TYP.  
4
3
2
1
2.8  
(0.11)  
4.3  
(0.17)  
FUNCTION  
HEXADECIMAL  
PIN  
NUMERIC  
1
2
3
4
5
6
7
8
Input 2  
Input 4  
Input 8  
Input 2  
Input 4  
Input 8  
Decimal Point  
Latch Enable  
Ground  
Blanking Control  
Latch Enable  
Ground  
V
V
CC  
Input 1  
CC  
Input 1  
NOTES:  
1. DIMENSIONS IN MILLIMETERS AND (INCHES).  
2. DIGIT CENTER LINE IS 0.38 mm ( 0.015 INCH)  
FROM PACKAGE CENTER LINE.  
3. UNLESS OTHERWISE SPECIFIED, THE TOLERANCE  
ON ALL DIMENSIONS IS 0.38 mm ( 0.015 INCH).  
4. HDSP-0860 AND HDSP-0960 SERIES.  
2
t
t
SETUP  
HOLD  
DATA INPUT  
(LOW LEVEL DATA)  
TRUTH TABLE  
1.5 V  
1.5 V  
1.5 V  
1.5 V  
BCD DATA[1]  
NUMERIC  
HEXADECIMAL  
X
X
X
X
1
8
4
2
DATA INPUT  
(HIGH LEVEL DATA)  
L
L
L
L
t
TLH  
ENABLE  
INPUT  
L
L
L
L
L
H
H
L
H
L
90%  
1.5 V  
1.5 V  
10%  
L
L
H
L
L
H
H
H
H
L
t
W
L
L
H
L
Figure 1. Timing diagram.  
L
H
H
L
L
H
L
H
H
H
H
H
H
H
H
L
L
H
L
L
H
H
L
L
H
L
(BLANK)  
(BLANK)  
••••  
V
7
5
CC  
H
H
H
H
ENABLE  
L
H
L
LOGIC  
INPUT  
8
1
2
3
X1  
X2  
X4  
X8  
H
H
(BLANK)  
(BLANK)  
H
LATCH  
MEMORY  
MATRIX  
DECODER  
ON  
OFF  
LOAD DATA  
LATCH DATA  
DISPLAY–ON  
DISPLAY–OFF  
V
V
V
V
V
V
= L  
= H  
= L  
= H  
= L  
= H  
DP  
DP  
E
DECIMAL PT.[2]  
ENABLE[1]  
(2)  
DP  
4
DP  
E
B
BLANKING[3]  
B
DP  
NOTES:  
1. H = LOGIC HIGH; L = LOGIC LOW. WITH THE ENABLE INPUT AT  
LOGIC HIGH, CHANGES IN BCD INPUT LOGIC LEVELS HAVE NO  
LED  
MATRIX  
DRIVER  
LED  
MATRIX  
(3)  
BLANKING  
4
6
EFFECT UPON DISPLAY MEMORY, DISPLAYED CHARACTER, OR DP.  
CONTROL  
2. THE DECIMAL POINT INPUT, DP, PERTAINS ONLY TO THE  
NUMERIC DISPLAYS.  
3. THE BLANKING CONTROL INPUT, B, PERTAINS ONLY TO THE  
HEXADECIMAL DISPLAYS. BLANKING INPUT HAS NO EFFECT  
UPON DISPLAY MEMORY.  
GROUND  
Figure 2. Logic block diagram.  
3
Absolute Maximum Ratings  
Description  
StorageꢀTemperature,ꢀAmbientꢀ  
OperatingꢀTemperature,ꢀAmbient[1]  
Symbol  
TSꢀ  
Min.  
-65ꢀ  
-55ꢀ  
-0.5ꢀ  
-0.5ꢀ  
-0.5ꢀ  
Max.  
+100ꢀ  
+85ꢀ  
Unit  
°C  
°C  
V
TAꢀ  
SupplyꢀVoltage[2]  
VoltageꢀAppliedꢀtoꢀInputꢀLogic,ꢀdpꢀandꢀEnableꢀPinsꢀ  
VoltageꢀAppliedꢀtoꢀBlankingꢀInput[2]  
SolderingꢀTemperatureꢀ[1.59ꢀmmꢀ(0.063ꢀinch)ꢀBelowꢀBody]ꢀ  
SolderꢀDipping,ꢀmax.ꢀ5ꢀSecondsꢀ  
VCC  
+7.0ꢀ  
VI,ꢀVDPꢀ,ꢀVEꢀ  
VBꢀ  
VCC  
V
VCCꢀꢀꢀ  
V
260ꢀ  
250ꢀ  
°Cꢀ  
°C  
ꢀꢀꢀꢀWaveꢀSoldering,ꢀmax.ꢀ3ꢀSecondsꢀ  
Recommended Operating Conditions  
Description  
Symbol  
Min.  
4.5ꢀ  
-55ꢀ  
100ꢀ  
50ꢀ  
50ꢀ  
Nom.  
5.0ꢀ  
Max.  
5.5ꢀ  
Unit  
V
SupplyꢀVoltage[2]  
VCC  
OperatingꢀTemperature,ꢀAmbient[1]  
TAꢀ  
+85ꢀ  
°C  
EnableꢀPulseꢀWidthꢀ  
tWꢀ  
nsec  
nsec  
nsec  
msec  
TimeꢀDataꢀMustꢀBeꢀHeldꢀBeforeꢀPositiveꢀTransitionꢀofꢀEnableꢀLineꢀ  
tSETUP  
tHOLD  
tTLH  
TimeꢀDataꢀMustꢀBeꢀHeldꢀAfterꢀPositiveꢀTransitionꢀofꢀEnableꢀLineꢀ  
EnableꢀPulseꢀRiseꢀTimeꢀ  
1.0ꢀ  
Optical Characteristics at T = 25°C, V = 5.0 V  
A
CC  
Device  
HDSP-0760ꢀ  
Description  
Symbol  
IVꢀ  
Min.  
65ꢀ  
Typ.  
Max.  
Unit  
µcd  
nm  
nm  
µcd  
nm  
nm  
µcd  
nm  
nm  
µcd  
nm  
nm  
LuminousꢀIntensityꢀperꢀLEDꢀ(DigitꢀAverage)[3,4]  
140ꢀ  
635ꢀ  
626ꢀ  
620ꢀ  
635ꢀ  
626ꢀ  
490ꢀ  
583ꢀ  
585ꢀ  
1100ꢀ  
568ꢀ  
574ꢀ  
Series  
PeakꢀWavelengthꢀ  
DominantꢀWavelength[5]  
LuminousꢀIntensityꢀperꢀLEDꢀ(DigitꢀAverage)[3,4]  
lPEAKꢀ  
ldꢀ  
HDSP-0770ꢀ  
IVꢀ  
260ꢀ  
Series  
PeakꢀWavelengthꢀ  
DominantꢀWavelength[5]  
LuminousꢀIntensityꢀperꢀLEDꢀ(DigitꢀAverage)[3,4]  
lPEAKꢀ  
ldꢀ  
IVꢀ  
HDSP-0860ꢀ  
215ꢀ  
Series  
PeakꢀWavelengthꢀ  
DominantꢀWavelength[5,6]  
LuminousꢀIntensityꢀperꢀLEDꢀ(DigitꢀAverage)[3,4]  
lPEAKꢀ  
ldꢀ  
IVꢀ  
HDSP-0960ꢀ  
298ꢀ  
Series  
PeakꢀWavelengthꢀ  
DominantꢀWavelength[5,6]  
lPEAKꢀ  
ldꢀ  
Notes:  
1.ꢀTheꢀnominalꢀthermalꢀresistanceꢀofꢀaꢀdisplayꢀmountedꢀinꢀaꢀsocketꢀthatꢀisꢀsolderedꢀontoꢀaꢀprintedꢀcircuitꢀboardꢀisꢀRq ꢀ=ꢀ50°C/W/device.ꢀTheꢀ  
JA  
deviceꢀpackageꢀthermalꢀresistanceꢀisꢀRq ꢀ=ꢀ15°C/W/device.ꢀTheꢀthermalꢀresistanceꢀdeviceꢀpin-to-ambientꢀthroughꢀtheꢀPCꢀboardꢀshouldꢀnotꢀ  
J-PIN  
exceedꢀ35°C/W/deviceꢀforꢀoperationꢀatꢀT ꢀ=ꢀ+85°C.  
A
2.ꢀVoltageꢀvaluesꢀareꢀwithꢀrespectꢀtoꢀdeviceꢀground,ꢀpinꢀ6.  
3.ꢀTheseꢀdisplaysꢀareꢀcategorizedꢀforꢀluminousꢀintensityꢀwithꢀtheꢀintensityꢀcategoryꢀdesignatedꢀbyꢀaꢀletterꢀcodeꢀlocatedꢀonꢀtheꢀbackꢀofꢀtheꢀdisplayꢀ  
package.ꢀCaseꢀtemperatureꢀofꢀtheꢀdeviceꢀimmediatelyꢀpriorꢀtoꢀtheꢀlightꢀmeasurementꢀisꢀequalꢀtoꢀ25°C.  
4
Electrical Characteristics; T = -55°C to +85°C  
Description  
A
[7]  
Symbol  
Test Conditions  
Min.  
Typ.  
Max.  
Unit  
SupplyꢀCurrentꢀ  
HDSP-0760ꢀSeriesꢀ  
ICC  
VCCꢀ=ꢀ5.5ꢀVꢀ  
(Charactersꢀ“5.”  
orꢀ“B”ꢀDisplayed)  
78ꢀ  
105ꢀ  
175ꢀ  
mA  
HDSP-0770ꢀSeriesꢀ  
HDSP-0860ꢀSeriesꢀ  
HDSP-0960ꢀSeries  
120ꢀ  
PowerꢀDissipationꢀ  
HDSP-0760ꢀSeriesꢀ  
PTꢀ  
390ꢀ  
690ꢀ  
573ꢀ  
963ꢀ  
mW  
HDSP-0770ꢀSeriesꢀ  
HDSP-0860ꢀSeriesꢀ  
HDSP-0960ꢀSeries  
Logic,ꢀEnableꢀandꢀBlankingꢀLow-LevelꢀInputꢀ  
ꢀ Voltage  
VILꢀ  
VIHꢀ  
IILꢀ  
VCCꢀ=ꢀ4.5ꢀVꢀ  
0.8ꢀ  
Vꢀ  
Vꢀ  
Logic,ꢀEnableꢀandꢀBlankingꢀHigh-Levelꢀ  
2.0ꢀ  
InputꢀVoltage  
LogicꢀandꢀEnableꢀLow-LevelꢀInputꢀCurrentꢀ  
BlankingꢀLow-LevelꢀInputꢀCurrentꢀ  
VCCꢀ=ꢀ5.5ꢀVꢀ  
VILꢀ=ꢀ0.4ꢀVꢀ  
-1.6ꢀ  
-10ꢀ  
mA  
µA  
IBLꢀ  
Logic,ꢀEnableꢀandꢀBlankingꢀHigh-Levelꢀ  
IIHꢀ  
VCCꢀ=ꢀ5.5ꢀVꢀ  
VIHꢀ=ꢀ2.4ꢀV  
+40ꢀ  
µAꢀ  
InputꢀCurrentꢀ  
Weightꢀ  
1.0ꢀ  
gm  
LeakꢀRateꢀ  
5x10-8ꢀ cc/sec  
Notes:  
4.ꢀTheꢀluminousꢀintensityꢀatꢀaꢀspecificꢀoperatingꢀambientꢀtemperature,ꢀI ꢀ(T )ꢀmayꢀbeꢀapproximatedꢀfromꢀtheꢀfollowingꢀexponentialꢀequation:ꢀ  
V
A
[kꢀ(TAꢀ-ꢀ25°C)]  
I ꢀ(T )ꢀ=ꢀI ꢀ(25°C)ꢀe  
.
V
A
V
Device  
K
HDSP-0760ꢀSeries  
HDSP-0770ꢀSeries  
-0.0131/°C  
HDSP-0860ꢀSeries  
HDSP-0960ꢀSeries  
-0.0112/°C  
-0.0104/°C  
5.ꢀTheꢀdominantꢀwavelength,ꢀl ,ꢀisꢀderivedꢀfromꢀtheꢀCIEꢀChromaticityꢀDiagramꢀandꢀisꢀthatꢀsingleꢀwavelengthꢀwhichꢀdefinesꢀtheꢀcolorꢀofꢀtheꢀde-  
d
vice.  
6.ꢀTheꢀHDSP-0860ꢀandꢀHDSP-0960ꢀseriesꢀdevicesꢀareꢀcategorizedꢀasꢀtoꢀdominantꢀwavelengthꢀwithꢀtheꢀcategoryꢀdesignatedꢀbyꢀaꢀnumberꢀonꢀtheꢀ  
backꢀofꢀtheꢀdisplayꢀpackage.  
7.ꢀAllꢀtypicalꢀvaluesꢀatꢀV ꢀ=ꢀ5.0ꢀVꢀandꢀT ꢀ=ꢀ25°C.  
CC  
A
5
Operational Considerations  
Electrical  
Mechanical  
Theꢀprimaryꢀthermalꢀpathꢀforꢀpowerꢀdissipationꢀisꢀthroughꢀ  
theꢀdeviceꢀleads.ꢀTherefore,ꢀtoꢀinsureꢀreliableꢀoperationꢀ  
upꢀtoꢀanꢀambientꢀtemperatureꢀofꢀ+85°C,ꢀitꢀisꢀimportantꢀ  
toꢀmaintainꢀaꢀcase-to-ambientꢀthermalꢀresistanceꢀofꢀlessꢀ  
thanꢀ35°Cꢀwatt/deviceꢀasꢀmeasuredꢀonꢀtopꢀofꢀdisplayꢀpinꢀ  
3.  
Theseꢀdevicesꢀuseꢀaꢀmodifiedꢀ4ꢀxꢀ7ꢀdotꢀmatrixꢀlightꢀemit-  
tingꢀ diodeꢀ toꢀ displayꢀ decimal/hexadecimalꢀ numericꢀ  
information.ꢀTheꢀhighꢀefficiencyꢀredꢀandꢀyellowꢀLEDsꢀareꢀ  
GaAsPꢀepitaxialꢀlayerꢀonꢀaꢀGaPꢀtransparentꢀsubstrate.ꢀTheꢀ  
greenꢀLEDsꢀareꢀGaPꢀepitaxialꢀlayerꢀonꢀaꢀGaPꢀtransparentꢀ  
substrate.ꢀTheꢀLEDsꢀareꢀdrivenꢀbyꢀconstantꢀcurrentꢀdrivers,ꢀ Forꢀinformationꢀonꢀsolderingꢀandꢀpostꢀsolderꢀcleaningꢀseeꢀ  
BCDꢀinformationꢀisꢀacceptedꢀbyꢀtheꢀdisplayꢀmemoryꢀwhenꢀ ApplicationꢀNoteꢀ1027,ꢀSoldering LED Components.  
theenablelineꢀ isatꢀ logiclowandꢀ theꢀ dataꢀ isꢀ latchedꢀ  
whenꢀtheꢀenableꢀisꢀatꢀlogicꢀhigh.ꢀUsingꢀtheꢀenableꢀpulseꢀ  
Contrast Enhancement  
widthꢀandꢀdataꢀsetupꢀandꢀholdꢀtimesꢀlistedꢀinꢀtheꢀRecom-  
Theseꢀ displayꢀ devicesꢀ areꢀ designedꢀ toꢀ provideꢀ anꢀ  
mendedꢀOperatingꢀConditionsꢀallowsꢀdataꢀtoꢀbeꢀclockedꢀ optimumON/OFFcontrastwhenplacedbehindanap-  
intoꢀanꢀarrayꢀofꢀdisplaysꢀatꢀaꢀ6.7ꢀMHzꢀrate.  
propriateꢀcontrastꢀenhancementꢀfilter.ꢀForꢀfurtherꢀinfor-  
mation,ꢀpleaseꢀreferꢀtoꢀApplicationꢀNoteꢀ1015,ꢀContrast  
Enhancement Techniques for LED Displays.  
Theꢀdecimalꢀpointꢀinputꢀisꢀactiveꢀlowꢀtrueꢀandꢀthisꢀdataꢀ  
isꢀlatchedꢀintoꢀtheꢀdisplayꢀmemoryꢀinꢀtheꢀsameꢀfashionꢀ  
asꢀtheꢀBCDꢀdata.ꢀTheꢀdecimalꢀpointꢀLEDꢀisꢀdrivenꢀbyꢀtheꢀ Over Range Display  
on-boardꢀIC.  
Theoverrangedevicesdisplayꢀ“ 1”anddecimalpoint.ꢀ  
Theꢀblankingꢀcontrolꢀinputꢀonꢀtheꢀhexadecimalꢀdisplaysꢀ Theꢀcharacterꢀheightꢀandꢀpackageꢀconfigurationꢀareꢀtheꢀ  
blanksꢀ(turnsꢀo)ꢀtheꢀdisplayedꢀinformationꢀwithoutꢀdis- sameꢀasꢀtheꢀnumericꢀandꢀhexadecimalꢀdevices.ꢀCharacterꢀ  
turbingthecontentsofdisplaymemory.ꢀThedisplayisꢀ selectionꢀ isꢀ obtainedꢀ viaꢀ externalꢀ switchingꢀ transistorsꢀ  
blankedꢀatꢀaꢀminimumꢀthresholdꢀlevelꢀofꢀ2.0ꢀvolts.ꢀWhenꢀ andꢀcurrentꢀlimitingꢀresistors.  
blanked,ꢀtheꢀdisplayꢀstandbyꢀpowerꢀisꢀnominallyꢀ250ꢀmWꢀ  
atꢀT ꢀ=ꢀ25°C.  
A
Package Dimensions  
10.2  
MAX.  
6
PIN  
1
FUNCTION  
Plus  
(0.400)  
D
Pin  
8
7
5
2
Numeral One  
Numeral One  
DP  
Character  
1
2,3  
Xꢀ  
Xꢀ  
1ꢀ  
Xꢀ  
0ꢀ  
4
8
3
1.5  
+ꢀ  
1ꢀ  
0ꢀ  
Xꢀ  
Xꢀ  
0ꢀ  
Xꢀ  
Xꢀ  
Xꢀ  
1ꢀ  
0ꢀ  
1
1
X
X
0
4
(0.06)  
-ꢀ  
1ꢀ  
5
Open  
4.8  
(0.19)  
7.4  
(0.29)  
6
Open  
13.5  
(0.53)  
4.8  
7
V
CC  
Minus/Plus  
DecimalꢀPointꢀ  
Blankꢀ  
(0.19)  
8
5
1.9  
(0.075)  
3.3  
(0.13)  
Notes:  
0:ꢀ LineꢀswitchingꢀtransistorꢀinꢀFigureꢀ7ꢀcutoff.  
1
2
3
4
1:ꢀ LineꢀswitchingꢀtransistorꢀinꢀFigureꢀ7ꢀsaturated.  
X:ꢀ‘don’tꢀcare’  
FRONT VIEW  
NOTE: DIMENSIONS IN MILLIMETERS AND (INCHES).  
6
Absolute Maximum Ratings  
Description  
StorageꢀTemperature,ꢀAmbientꢀ  
OperatingꢀTemperature,ꢀAmbientꢀ  
ForwardꢀCurrent,ꢀEachꢀLEDꢀ  
ReverseꢀVoltage,ꢀEachꢀLEDꢀ  
Symbol  
TSꢀ  
Min.  
-65ꢀ  
Max.  
+100ꢀ  
+85ꢀ  
10ꢀ  
Unit  
°C  
TAꢀ  
-55ꢀ  
°C  
IFꢀ  
mA  
V
VRꢀ  
5ꢀ  
#7  
V = 5.0 V  
CC  
NUMERAL ONE  
MINUS PLUS  
PLUS  
d.p.  
#3  
R1  
#2  
R2  
#4  
R1  
#8  
R3  
#1  
R3  
Figure 3. Typical driving circuit.  
Recommended Operating Conditions V = 5.0 V  
CC  
Forward Current Per  
Device LED, mA  
Resistor Value  
R
1
R
R
3
2
HDSP-0763ꢀ  
LowꢀPowerꢀ  
2.8ꢀ  
8ꢀ  
1300ꢀ  
360ꢀ  
360ꢀ  
360ꢀ  
200ꢀ  
47ꢀ  
300  
68  
HighꢀBrightnessꢀ  
HDSP-0863ꢀ  
HDSP-0963ꢀ  
8ꢀ  
36ꢀ  
56  
8ꢀ  
30ꢀ  
43  
Luminous Intensity per LED  
[3,4]  
(DigitꢀAverage) ꢀatꢀT ꢀ=ꢀ25°C  
A
Device  
HDSP-0763ꢀ  
Test Conditions  
IFꢀ=ꢀ2.8ꢀmAꢀ  
Min.  
65ꢀ  
Typ.  
Units  
µcd  
µcd  
µcd  
µcd  
140ꢀ  
620ꢀ  
490ꢀ  
1100ꢀ  
IFꢀ=ꢀ8ꢀmAꢀ  
IFꢀ=ꢀ8ꢀmAꢀ  
IFꢀ=ꢀ8ꢀmAꢀ  
HDSP-0863ꢀ  
HDSP-0963ꢀ  
215ꢀ  
298ꢀ  
7
Electrical Characteristics: T = -55°C to +85°C  
A
Test  
Conditions  
Device  
HDSP-0763ꢀ  
Description  
PowerꢀDissipationꢀ(AllꢀLEDsꢀIlluminated)ꢀ  
Symbol  
PTꢀ  
Min.  
Typ.  
72ꢀ  
Max.  
Unit  
mW  
IFꢀ=ꢀ2.8ꢀmAꢀ  
IFꢀ=ꢀ8ꢀmAꢀ  
IFꢀ=ꢀ2.8ꢀmAꢀ  
IFꢀ=ꢀ8ꢀmAꢀ  
IFꢀ=ꢀ8ꢀmAꢀ  
224ꢀ  
1.6ꢀ  
282  
ForwardꢀVoltageꢀperꢀLEDꢀ  
VFꢀ  
V
1.75ꢀ  
237ꢀ  
1.90ꢀ  
243ꢀ  
1.85ꢀ  
2.2  
282ꢀ  
2.2ꢀ  
282ꢀ  
2.2ꢀ  
HDSP-0863ꢀ  
PowerꢀDissipationꢀ(AllꢀLEDsꢀIlluminated)ꢀ  
ForwardꢀVoltageꢀperꢀLEDꢀ  
PowerꢀDissipationꢀ(AllꢀLEDsꢀIlluminated)ꢀ  
ForwardꢀVoltageꢀperꢀLEDꢀ  
PTꢀ  
VFꢀ  
PTꢀ  
VFꢀ  
mW  
V
HDSP-0963ꢀ  
IFꢀ=ꢀ8ꢀmAꢀ  
mW  
V
Intensity Bin Limits for HDSP-0760 Series  
Intensity Range (µcd)  
Intensity Bin Limits for HDSP-0860 Series  
Intensity Range (µcd)  
Color Bin Limits  
Color Range (nm)  
Bin  
Aꢀ  
Bꢀ  
Min.  
Max.  
Bin  
Aꢀ  
Bꢀ  
Min.  
Max.  
Color  
Yellowꢀ  
Bin  
Min.  
Max.  
65.00ꢀ  
84.29ꢀ  
114.29ꢀ  
165.71ꢀ  
260.00ꢀ  
402.86ꢀ  
625.00ꢀ  
102.14  
137.86  
200.00  
300.00  
487.86  
755.71  
1171.43  
215.00ꢀ  
279.29ꢀ  
377.14ꢀ  
547.14ꢀ  
820.71ꢀ  
1272.14ꢀ  
337.86  
456.43  
662.14  
992.86  
1539.29  
2385.71  
1ꢀ  
2ꢀ  
3ꢀ  
1ꢀ  
2ꢀ  
3ꢀ  
581.5ꢀ  
584.0ꢀ  
586.5ꢀ  
570.0ꢀ  
573.0ꢀ  
576.0ꢀ  
585.0  
587.5  
590.0  
574.0  
577.0  
580.0  
Cꢀ  
Dꢀ  
Eꢀ  
Cꢀ  
Dꢀ  
Eꢀ  
Greenꢀ  
Fꢀ  
Fꢀ  
Gꢀ  
Note:  
Note:  
TestꢀconditionsꢀasꢀspecifiedꢀinꢀOpticalꢀCharac-  
teristicꢀtable.  
TestꢀconditionsꢀasꢀspecifiedꢀinꢀOpticalꢀCharac-  
teristicꢀtable.  
Note:  
TestꢀconditionsꢀasꢀspecifiedꢀinꢀOpticalꢀCharac-  
teristicꢀtable.ꢀ  
Intensity Bin Limits for HDSP-0960 Series  
Intensity Range (µcd)  
Intensity Bin Limits for HDSP-0770 Series  
Intensity Range (µcd)  
Bin  
Cꢀ  
Dꢀ  
Eꢀ  
Min.  
Max.  
Bin  
Eꢀ  
Min.  
Max.  
298.57ꢀ  
432.86ꢀ  
648.57ꢀ  
971.43ꢀ  
1452.86ꢀ  
523.57  
785.00  
1175.00  
1757.86  
2629.29  
260.00ꢀ  
403.00ꢀ  
624.64ꢀ  
969.00ꢀ  
487.64  
755.79  
1171.50  
1817.00  
Fꢀ  
Gꢀ  
Hꢀ  
Fꢀ  
Gꢀ  
Note:  
TestꢀconditionsꢀasꢀspecifiedꢀinꢀOpticalꢀCharac-  
teristicꢀtable.  
Note:  
TestꢀconditionsꢀasꢀspecifiedꢀinꢀOpticalꢀCharac-  
teristicꢀtable.  
For product information and a complete list of distributors, please go to our website: www.avagotech.com  
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.  
Data subject to change. Copyright © 2005-2008 Avago Technologies Limited. All rights reserved. Obsoletes 5989-3187EN  
AV02-1335EN - June 6, 2008  

相关型号:

HDSP-881

Glass/Ceramic Numeric and Hexadecimal Displays for Industrial Applications
AVAGO

HDSP-883

Glass/Ceramic Numeric and Hexadecimal Displays for Industrial Applications
AVAGO

HDSP-884

Glass/Ceramic Numeric and Hexadecimal Displays for Industrial Applications
AVAGO

HDSP-961

7 SEG NUMERIC DISPLAY, GREEN, 7.4mm
AVAGO

HDSP-962

7 SEG NUMERIC DISPLAY, GREEN, 7.4mm
AVAGO

HDSP-963

7 SEG NUMERIC DISPLAY, GREEN
AVAGO

HDSP-981

Glass/Ceramic Numeric and Hexadecimal Displays for Industrial Applications
AVAGO

HDSP-983

Glass/Ceramic Numeric and Hexadecimal Displays for Industrial Applications
AVAGO

HDSP-984

Glass/Ceramic Numeric and Hexadecimal Displays for Industrial Applications
AVAGO

HDSP-A01E

Agilent HDSP-G01x/G03x 10.16 mm (0.4 inch) Dual Digit General Purpose Seven-Segment Display
HP

HDSP-A01X

Agilent HDSP-G01x/G03x 10.16 mm (0.4 inch) Dual Digit General Purpose Seven-Segment Display
HP

HDSP-A03E

Agilent HDSP-G01x/G03x 10.16 mm (0.4 inch) Dual Digit General Purpose Seven-Segment Display
HP