HFBR-1607Z [AVAGO]
SERCOS Fiber Optic Transmitters and Receivers; SERCOS光纤发射器和接收器型号: | HFBR-1607Z |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | SERCOS Fiber Optic Transmitters and Receivers |
文件: | 总6页 (文件大小:371K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HFBR-0600Z Series
SERCOS Fiber Optic Transmitters and Receivers
Data Sheet
SERCOS
Features
SERCOS is a Serial Realtime Communication System, a Fully compliant to SERCOS optical specifications
standard digital interface for communication between
controls and drives for numerically controlled machines.
The SERCOS interface specification was written by a joint
Optimized for 1 mm plastic optical fiber
Compatible with SMA connectors
working group of the VDW (German MachineTool Builders Auto-insertable and wave solderable
Association) and ZVEI (German Electrical and Electronic
Manufacturer’s Association) to allow data exchange
between NC controls and drives via fiber optic rings, with
Data transmission at symbol rates from DC to over
2 MBd for distances from 0 to over 20 metres
isolation and noise immunity. The HFBR-0600Z family
of fiber optic transmitters and receivers comply to the
SERCOS specifications for transmitter and receiver optical
Applications
Industrial control data links
characteristics and connector style (SMA).
Reduction of lightning and voltage transient suscep-
tibility
Description
Tempest-secure data processing equipment
Isolation in test and measurement instruments
Robotics communication
The HFBR-0600Z components are capable of operation at
symbol rates from DC to over 2 MBd and distances from
0 to over 20 metres. The HFBR-1602Z and HFBR-1604Z
transmitters contain a 655 nm AlGaAs emitter capable of
efficiently launching optical power into 1000 mm plastic
optical fiber. The optical output is specified at the end of
0.5 m of plastic optical fiber.
The HFBR-1604Z is a selected version of the HFBR-1602,
with power specified to meet the SERCOS high attenua-
tion specifications.
The HFBR-2602Z receiver incorporates an integrated
photo IC containing a photodetector and DC amplifier
driving an open-collector Schottky output transistor. The
HFBR-2602Z is designed for direct interfacing to popular
logic families. The absence of an internal pullup resistor
allows the open-collector output to be used with logic
families such as CMOS requiring voltage excursions higher
than V . The HFBR-2602Z has a dynamic range of 15 dB.
CC
CAUTION: The small junction sizes inherent to the design of this component increase the component's susceptibility
to damage from electrostatic discharge (ESD). It is advised that normal static precautions be taken in handling and
assembly of this component to prevent damage and/or degradation which may be induced by ESD.
HFBR-160XZ Transmitters
HFBR-0600Z SMA Series
Mechanical Dimensions
Pin
Function
1*
2
3
N.C.
ANODE
N.C.
4*
5*
6
7**
8*
N.C.
N.C.
N.C.
CATHODE
N.C.
HFBR-2602Z Receiver
Pin
Function
1*
2
3
4*
5*
6
N.C.
V
CC (5 V)
COMMON
N.C.
N.C.
DATA
7
8*
COMMON
N.C.
*
Pins 1, 4, 5, and 8 are isolated from the internal circuitry, but
electrically connected to one another.
** Transmitter Pin 7 may be left unconnected if necessary.
In the receiver, both the opencollector“Data”output Pin 6 SMA is an industry standard fiber optic connector,
and V Pin 2 are referenced to “Common” Pin 3 and 7. available from many fiber optic connector suppliers.
CC
It is essential that a bypass capacitor (0.1 F ceramic) be HFBR-4401Z is a kit consisting of 100 nuts and 100 washers
connected from Pin 2 (V ) to Pin 3 (circuit common) of
for panel mounting the HFBR-0600Z components.
CC
the receiver.
2
HFBR-1602Z/1604Z Transmitters
Absolute Maximum Ratings
Parameter
Symbol
TS
Min.
-55
-40
Max.
85
Units
°C
Reference
Storage Temperature
Operating Temperature
Lead Soldering Cycle
TA
85
°C
Temp.
Time
260
10
°C
Note 1
Note 1
s
Forward Input Current Peak
Forward Input Current Average
Reverse Input Voltage
IFPK
IFavg
VBR
120
60
mA
mA
V
-5
Electrical/Optical Characteristics 0 to 55° C, unless otherwise stated.
[2]
Parameter
Symbol
VF
Min.
Typ.
1.9
Max.
Unit
V
Condition
Reference
Forward Voltage
1.5
2.2
IF = 35 mA
IF = 35 mA
Forward Voltage
Temp. Coefficient
VF/T
-1.2
mV/°C
Reverse Input Voltage
Peak Emission Wavelength
Full Width Half Maximum
Diode Capacitance
VBR
P
-5.0
640
-18
655
20
V
IR = 100 A
675
30
nm
nm
pF
FWHM
CT
25° C
30
VF = 0
f = 1 MHz
Optical Power
Temp. Coefficient
PT/T
-0.01
330
dBm/°C
IF = 35 mA
Thermal Resistance
JA
°C/W
dBm
Notes 3, 4
Peak Optical Output
Power of HFBR-1602Z
PT1602
-10.5
-5.5
IF = 35 mA
Notes 5, 6,11
Peak Optical Output
Power of HFBR-1604Z
PT1604
-7.5
-10.5
-3.5
-5.5
dBm
dBm
IF = 60 mA
IF = 35 mA
Notes 5, 6,11
Rise Time (10% to 90%)
tr
tf
57
50
ns
ns
IF = 60 mA
IF = 35 mA
Fall Time (90% to 10%)
40
27
ns
ns
IF = 60 mA
IF = 35 mA
3
HFBR-2602Z Receiver
Absolute Maximum Ratings
Parameter
Symbol
TS
Min.
-55
-40
Max.
85
Units
°C
Reference
Storage Temperature
Operating Temperature
Lead Soldering Cycle
TA
85
°C
Temp.
Time
260
10
°C
Note 1
Note 1
s
Supply Voltage
Vcc
IO
-0.5
-0.5
7.0
25
V
Output Current
mA
V
Output Voltage
VO
18.0
40
Output Collector Power Dissipation
Fan Out (TTL)
PO AVG
N
mW
5
Note 8
Electrical/Optical Characteristics 0 to 55° C;
Fiber core diameter ≤ 1.0 mm, fiber N.A. ≤ 0.5, 4.75 V ≤ V ≤ 5.25 V
CC
[2]
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Reference
High Level Output Current
IOH
5
250
A
VOH = 18 V
PR < -31.2 dBm
Low Level Output Voltage
High Level Supply Current
Low Level Supply Current
VOL
ICCH
ICCL
0.4
3.5
6.2
0.5
6.3
10
V
IOL = 8 mA
PR > -20.0 dBm
mA
mA
VCC = 5.25 V
PR < -31.2 dBm
VCC = 5.25 V
PR > -20.0 dBm
-9
Dynamic Characteristics 0 to 55° C unless otherwise specified; 4.75 V ≤ V ≤ 5.25 V; BER ≤ 10
CC
[2]
Parameter
Symbol
Min.
Typ.
Max.
Unit
Condition
Reference
Peak Input Power
Level Logic HIGH
PRH
-31.2
dBm
P = 655 nm
Note 7
Peak Input Power
Level Logic LOW
PRL
-20.0
-5.0
dBm
ns
IOL = 8 mA
Note 7
Propagation Delay
LOW to HIGH
tPLH
tPHL
PWD
60
PR = -20 dBm
2 MBd
Note 8, 9
Note 8, 9
Propagation Delay
HIGH to LOW
110
ns
PR = -20 dBm
2 MBd
Pulse Width Distortion,
tPLH - tPHL
50
-50
ns
ns
PR = -5 dBm
PR = -20 dBm
Note 10
Figure 6
Notes:
1. 2.0 mm from where leads enter case.
2. Typical data at T = +25° C.
A
3. Thermal resistance is measured with the transmitter coupled to a connector assembly and fiber, and mounted on a printed circuit board.
4. Pins 2, 6, and 7 are welded to the cathode header connection to minimize the thermal resistance from junction to ambient. To further reduce the
thermal resistance, the cathode trace should be made as large as is consistent with good RF circuit design.
5.
P is measured with a large area detector at the end of 0.5 metre of plastic optical fiber with 1 mm diameter and numerical aperture of 0.5.
T
6. When changing W to dBm, the optical power is referenced to 1 mW (1000 W). Optical Power P(dBm) = 10 log [P (W)/1000 W].
7. Measured at the end of 1mm plastic fiber optic cable with a large area detector.
8. 8 mA load (5 x 1.6 mA), R = 560 .
L
9. Propagation delay through the system is the result of several sequentially occurring phenomena. Consequently it is a combination of data-rate-
limiting effects and of transmission-time effects. Because of this, the data-rate limit of the system must be described in terms of time differentials
between delays imposed on falling and rising edges. As the cable length is increased, the propagation delays increase. Data-rate, as limited by
pulse width distortion, is not affected by increasing cable length if the optical power level at the receiver is maintained.
10. Pulse width distortion is the difference between the delay of the rising and falling edges.
11. Both HFBR-1602Z and HFBR-1604Z meet the SERCOS "low attenuation" specifications when operated at 35 mA; only HFBR-1604Z meets the
SERCOS "high attenuation" limits when operated at 60 mA.
4
Figure 1. Forward voltage and current characteristics.
Figure 2. Typical transmitter output vs. forward current.
Figure 3. Transmitter spectrum normalized to the peak at 25° C.
Figure 4. Typical propagation delay through system with 0.5 metre of cable.
Figure 5. Typical HFBR-160XZ/2602Z link pulsewidth distortion vs. optical
power.
5
Figure 6. System propagation delay test circuit and waveform timing definitions.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved. Obsoletes 5989-4798EN
AV02-3638EN - June 19, 2012
相关型号:
HFBR-1712TZ
High Performance 850 nm Transmitter for extended link length applications with ST connector
AVAGO
©2020 ICPDF网 联系我们和版权申明