HLCP-J100 [AVAGO]
10-Element Bar Graph Array; 10元条形图阵列
| 型号： | HLCP-J100 |
| 厂家： | 
AVAGO TECHNOLOGIES LIMITED |
| 描述： | 10-Element Bar Graph Array |
| 文件： | 总8页 (文件大小：555K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HLCP-J100
10-ElementBarGraphArray
DataSheet
HLCP-J100
HDSP-4820
HDSP-4830
HDSP-4832
Description
Features
These 10-element LED arrays are designed to display
information in easily recognizable bar graph form.
Thepackagesareendstackableandthereforecapable
of displaying long strings of information. Use of
these bar graph arrays eliminates the alignment,
intensity, and color matching problems associated
withdiscreteLEDs.TheHDSP-4820/4830/4840/4850
and HLCP-J100 each contain LEDs of one color. The
HDSP-4832/4836 are multicolor arrays with High
Efficiency Red, Yellow, and High Performance Green
LEDs in a single package.
• Custom multicolor array capability
• Matched LEDs for uniform appearance
• End stackable
• Package interlock ensures correct alignment
• Low profile package
• Rugged construction
• Large, easily recognizable segments
• High ON-OFF contrast, segment to segment
• Wide viewing angle
• Categorized for luminous intensity
• HDSP-4832/ 4836/ 4840/ 4850 categorized for dominant
wavelength
Applications
• HLCP-J100 operates at low current
Typical intensity of 1.0 mcd at 1 mA drive current
• Industrial controls
• Instrumentation
• Office equipment
• Computer peripherals
• Consumer products
Package Dimensions
25.40 (1.000) MAX.
0.38
(0.015)
1. DIMENSIONS IN MILLIMETERS (INCHES).
2. ALL UNTOLERANCED DIMEMSIONS FOR
REFERENCE ONLY.
3. HDSP-4832/-4836/-4840/-4850 ONLY.
10.16
(0.400)
MAX.
5.08 (0.200)
2.54
(0.100)
1.52
(0.060)
6.10 ± 0.25
(0.240 ± 0.010)
LUMINOUS
INTENSITY
CATEGORY
COLOR BIN
(NOTE 3)
DATE CODE
PIN ONE
MARKING
HDSP XXXX
5.08 (0.200)
XYY
ZW
0.38
(0.015)
4.06
(0.160)
MIN.
2.54 ± 0.25
(0.100 ± 0.010)
7.62 ± 0.38
0.61
(0.024)
(0.300 ± 0.015)
Absolute Maximum Ratings[7]
Parameter
Red
HDSP-4820
AlGaAs Red
HLCP-J100
HER
HDSP-4830
Yellow
HDSP-4840 HDSP-4850
Green
Average Power Dissipation per LED
63 mW
37 mW
87 mW
50 mW
105 mW
(TA = 25°C)
[1]
[2]
[3]
[3]
[3]
Peak Forward Current per LED
DC Forward Current per LED
Operating Temperature Range
Storage Temperature Range
Reverse Voltage per LED
150 mA
45 mA
90 mA
60 mA
90 mA
[4]
[4]
[5]
[5]
[5]
30 mA
15 mA
30 mA
20 mA
30 mA
-40°C to +85°C -20°C to +100°C
-40°C to +85°C -55°C to +100°C
-40°C to +85°C
-40°C to +85°C
3.0 V
-20°C to +85°C
3.0 V
5.0 V
Lead Solder Dipping Temperature
(1.59 mm (1/ 16 inch) below
seating plane)[6]
260°C for 5 seconds[8]
Wave Soldering Temperature
250°C for 3 seconds
(at 2 mm distance from the body)
Notes:
1. See Figure 1 to establish pulsed operating conditions. Maximum pulse width is 1.5 ms.
2. See Figure 2 to establish pulsed operating conditions. Maximum pulse width is 1.5 ms.
3. See Figure 8 to establish pulsed operating conditions. Maximum pulse width is 2 ms.
4. Derate maximum DC current for Red above TA = 62°C at 0.79 mA/ °C, and AlGaAs Red above TA = 91°C at 0.8 mA/ °C. See Figure 3.
5. Derate maximum DC current for HER above TA = 48°C at 0.58 mA/ °C, Yellow above TA = 70°C at 0.66 mA/ °C, and Green above TA = 37°C at
0.48 mA/ °C. See Figure 9.
6. Clean only in water, isopropanol, ethanol, Freon TF or TE (or equivalent), or Genesolve DI-15 (or equivalent).
7. Absolute maximum ratings for HER, Yellow, and Green elements of the multicolor arrays are identical to the HDSP-4830/ 4840/ 4850 maximum
ratings.
8. Maximum tolerable component side temperature is 134°C during solder process.
Internal Circuit Diagram
a
Pin
Function
Pin
Function
1
2
20
19
18
17
16
15
14
13
12
11
b
c
d
e
1
2
3
4
5
6
7
8
9
Anode a
Anode b
Anode c
Anode d
Anode e
Anode f
Anode g
Anode h
Anode i
Anode j
11
12
13
14
15
16
17
18
19
20
Cathode j
Cathode i
Cathode h
Cathode g
Cathode f
Cathode e
Cathode d
Cathode c
Cathode b
Cathode a
3
4
5
f
6
g
7
h
8
i
j
10
9
10
2
Multicolor Array Segment Colors
HDSP-4832
HDSP-4836
Segment
Segment Color
Segment Color
a
b
c
d
e
f
HER
HER
HER
HER
HER
Yellow
Yellow
Green
Green
Yellow
Yellow
HER
Yellow
Yellow
Yellow
Yellow
Green
g
h
i
Green
j
Green
HER
[4]
Electrical/ Optical Characteristics at TA = 25°C
Red HDSP-4820
Parameter
Symbol
Min.
Typ.
1250
655
645
1.6
Max.
Units
µcd
Test Conditions
Luminous Intensity per LED (Unit Average)[1]
IV
610
IF = 20 mA
Peak Wavelength
Dominant Wavelength[2]
Forward Voltage per LED
lPEAK
ld
nm
nm
V
F
2.0
V
IF = 20 mA
[5]
Reverse Voltage per LED
V
R
3
12
V
IR = 100 µA
Temperature Coefficient V per LED
∆V / °C
-2.0
300
mV/ °C
°C/ W/ LED
F
F
Thermal Resistance LED Junction-to-Pin
RqJ-PIN
AlGaAs Red HLCP-J100
Parameter
Luminous Intensity per LED (Unit Average)[1]
Symbol
Min.
Typ.
1000
5200
Max.
Units
Test Conditions
IV
600
µcd
IF = 1 mA
IF = 20 mA Pk;
1 of 4 Duty Factor
Peak Wavelength
Dominant Wavelength[2]
lPEAK
ld
645
637
1.6
1.8
15
nm
nm
V
Forward Voltage per LED
V
F
IF = 1 mA
2.2
IF = 20 mA
IR = 100 µA
[5]
Reverse Voltage per LED
V
R
5
V
Temperature Coefficient V per LED
∆V / °C
-2.0
300
mV/ °C
°C/ W/ LED
F
F
Thermal Resistance LED Junction-to-Pin
RqJ-PIN
3
High Efficiency Red HDSP-4830
Parameter
Luminous Intensity per LED (Unit Average)[1,4] IV
Symbol
Min.
Typ.
3500
635
626
2.1
Max.
Units
µcd
Test Conditions
900
IF = 10 mA
Peak Wavelength
Dominant Wavelength[2]
lPEAK
nm
ld
nm
Forward Voltage per LED
V
F
2.5
V
IF = 20 mA
[5]
Reverse Voltage per LED
V
R
3
30
V
IR = 100 µA
Temperature Coefficient V per LED
∆V / °C
-2.0
300
mV/ °C
°C/ W/ LED
F
F
Thermal Resistance LED Junction-to-Pin
RqJ-PIN
Yellow HDSP-4840
Parameter
Luminous Intensity per LED (Unit Average)[1,4] IV
Symbol
Min.
Typ.
1900
583
585
2.2
Max.
Units
µcd
Test Conditions
600
IF = 10 mA
Peak Wavelength
lPEAK
nm
Dominant Wavelength[2,3]
Forward Voltage per LED
ld
581
3
592
2.5
nm
V
F
V
IF = 20 mA
[5]
Reverse Voltage per LED
V
R
40
V
IR = 100 µA
Temperature Coefficient V per LED
∆V / °C
-2.0
300
mV/ °C
°C/ W/ LED
F
F
Thermal Resistance LED Junction-to-Pin
RqJ-PIN
Green HDSP-4850
Parameter
Luminous Intensity per LED (Unit Average)[1,4] IV
Symbol
Min.
Typ.
1900
566
571
2.1
Max.
Units
µcd
Test Conditions
600
IF = 10 mA
Peak Wavelength
lPEAK
nm
Dominant Wavelength[2,3]
Forward Voltage per LED
ld
577
2.5
nm
V
F
V
IF = 10 mA
[5]
Reverse Voltage per LED
V
R
3
50
V
IR = 100 µA
Temperature Coefficient V per LED
∆V / °C
-2.0
300
mV/ °C
°C/ W/ LED
F
F
Thermal Resistance LED Junction-to-Pin
RqJ-PIN
Notes:
1. The bar graph arrays are categorized for luminous intensity. The category is designated by a letter located on the side of the package.
2. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device.
3. The HDSP-4832/ -4836/ -4840/ -4850 bar graph arrays are categorized by dominant wavelength with the category designated by a number adjacent to
the intensity category letter. Only the yellow elements of the HDSP-4832/ -4836 are categorized for color.
4. Electrical/ optical characteristics of the High-Efficiency Red elements of the HDSP-4832/ -4836 are identical to the HDSP-4830 characteristics.
Characteristics of Yellow elements of the HDSP-4832/ -4836 are identical to the HDSP-4840. Characteristics of Green elements of the
HDSP-4832/ -4836 are identical to the HDSP-4850.
5. Reverse voltage per LED should be limited to 3.0 V max. for the HDSP-4820/ -4830/ -4840/ -4850/ -4832/ -4836 and 5.0 V max. for the HLCP-J100.
4
Red, AlGaAs Red
20
10
9
8
15
12.5
10
7
6
10 KHz
3KHz
1
KHz
300 Hz
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
5
4
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
8
6
5
DERATING OF I
MAX
DC
DERATING OF I
MAX
DC
4
3
2
3
2
1.5
1
1
DC OPERATION
DC OPERATION
1
10
100
1000
10000
1
10
100
1000
10000
t
– PULSE DURATION – µSEC
t
– PULSE DURATION – µs
P
P
Figure 1. Maximum Tolerable Peak Current vs. Pulse Duration – Red.
Figure 2. Maximum Tolerable Peak Current vs. Pulse Duration –
AlGaAs Red.
40
160
1.2
R
θ
= 600°C/W
J-A
AlGaAs RED
RED
35
30
25
20
15
10
140
1.1
1.0
0.9
RED
RED
120
100
80
0.8
0.7
0.6
0.5
0.4
AlGaAs RED
60
40
AlGaAs RED
5
0
20
0
25 35 45 55 65 75 85 95 105
0
0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
– FORWARD VOLTAGE – V
0
20 40 60 80 100 120 140 160
I
– PEAK SEGMENT CURRENT – mA
V
F
T
– AMBIENT TEMPERATURE – °C
PEAK
A
Figure 3. Maximum Allowable DC Current vs.
Ambient Temperature. T = 100°C for Red
Figure 4. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak Current.
Figure 5. Forward Current vs. Forward
Voltage.
JMAX
and T
= 110°C for AlGaAs Red.
JMAX
1.4
1.2
1.0
0.8
0.6
0.4
20
10
5
2
1
0.2
0
0.1
0.1 0.2
0.5
1
5
10 20
0
5
10
15
20
25
I
– FORWARD CURRENT PER SEGMENT
F
I
– FORWARD CURRENT PER SEGMENT – mA
F
Figure 6. Relative Luminous Intensity vs. DC
Forward Current – Red.
Figure 7. Relative Luminous Intensity vs. DC
Forward Current – AlGaAs.
For a Detailed Explanation on the Use of Data Sheet Information and Recommended Soldering Procedures, See
Application Note 1005.
5
HER, Yellow, Green
20
15
GREEN
12
10
OPERATION IN
THIS REGION
REQUIRES
TEMPERATURE
DERATING OF
HER
8
f - REFRESH RATE
6
YELLOW
4
I
MAX
DC
3
100 Hz
2
1.5
1
DC OPERATION
1
10
100
1000
10000
t
– PULSE DURATION – µSEC
P
Figure 8. Maximum Tolerable Peak Current vs. Pulse Duration – HER/ Yellow/ Green.
1.6
40
35
30
25
R
= 600°C/W
θ
J-A
1.5
1.4
YELLOW SERIES
HER SERIES
GREEN/HER
GREEN
1.3
1.2
1.1
1.0
HER
GREEN SERIES
YELLOW
20
15
10
5
YELLOW
0.9
0.8
0.7
0.6
0
0
10 20 30 40 50 60 70 80 90 100
15 25 35 45 55 65 75 85 95
I
– PEAK SEGMENT CURRENT – mA
T
– AMBIENT TEMPERATURE – °C
PEAK
A
Figure 9. Maximum Allowable DC Current vs.
Figure 10. Relative Efficiency (Luminous
Ambient Temperature. T
= 100°C.
Intensity per Unit Current) vs. Peak Current.
JMAX
90
80
70
60
50
40
30
20
10
0
4.0
3.5
GREEN SERIES
3.0
2.5
2.0
1.5
YELLOW SERIES
HER
SERIES
1.0
0.5
0
1.0
2.0
3.0
4.0
5.0
0
5
10 15 20 25 30 35 40
V
– FORWARD VOLTAGE – V
I
– FORWARD CURRENT PER SEGMENT – mA
F
F
Figure 11. Forward Current vs. Forward
Voltage.
Figure 12. Relative Luminous Intensity vs. DC
Forward Current.
For a Detailed Explanation on the Use of Data Sheet Information and Recommended Soldering Procedures, See
Application Note 1005.
6
Electrical/ Optical
Standard Red HDSP-4820 series
VFMAX = 1.8 V + IPeak (10 Ω)
For: IPeak ≥ 5 mA
Where:
These versatile bar graph arrays
are composed of ten light emit-
ting diodes. The light from each
LED is optically stretched to
form individual elements. The
Red (HDSP-4820) bar graph
array LEDs use a p-n junction
diffused into a GaAsP epitaxial
layer on a GaAs substrate. The
AlGaAs Red (HLCP-J100) bar
graph array LEDs use double
heterojunction AlGaAs on a
GaAs substrate. HER (HDSP-
4830) and Yellow (HDSP-4840)
bar graph array LEDs use a
GaAsP epitaxial layer on a GaP
substrate. Green (HDSP-4850)
bar graph array LEDs use liquid
phase GaP epitaxial layer on a
GaP substrate. The multicolor
bar graph arrays (HDSP-4832/
4836) have HER, Yellow, and
Green LEDs in one package.
IVAVG is the calculated time
averaged luminous intensity
resulting from IFAVG.
AlGaAs Red HLCP-J100 series
VFMAX = 1.8 V + IPeak (20 Ω)
For: IPeak ≤ 20 mA
IFAVG is the desired time
averaged LED current.
VFMAX = 2.0 V + IPeak (10 Ω)
For: IPeak ≥ 20 mA
IFAVG DATA SHEET is the data
sheet test current for IVDATA
SHEET.
HER (HDSP-4830) and Yellow
(HDSP-4840) series
hpeak is the relative efficiency at
the peak current, scaled from
Figure 4 or 10.
VFMAX = 1.6 + IPeak (45 Ω)
For: 5 mA ≤ IPeak ≤ 20 mA
VFMAX = 1.75 + IPeak (38 Ω)
For: IPeak ≥ 20 mA
IV DATA SHEET is the data
sheet luminous intensity,
resulting from IFAVG DATA
SHEET.
Green (HDSP-4850) series
VFMAX = 2.0 + IPeak (50 Ω)
For: IPeak > 5 mA
For example, what is the
luminous intensity of an HDSP-
4830 driven at 50 mA peak 1/5
duty factor?
Figures 4 and 10 allow the
designer to calculate the
luminous intensity at different
peak and average currents. The
following equation calculates
intensity at different peak and
average currents:
IFAVG = (50 mA)(0.2) = 10 mA
These displays are designed for
strobed operation. The typical
forward voltage values can be
scaled from Figures 5 and 11.
These values should be used to
calculate the current limiting
resistor value and typical power
consumption. Expected maxi-
mum VF values for driver circuit
design and maximum power
dissipation may be calculated
using the VFMAX models:
IFAVG DATA SHEET = 10 mA
hpeak = 1.3
IV DATA SHEET = 3500 µcd
IVAVG = (IFAVG/IFAVG DATA
SHEET)hpeak)(IVDATA
SHEET)
Therefore
IVAVG = (10 mA/10 mA)
(1.3)(3500 µcd)
= 4550 µcd
7
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5989-2902EN
AV01-0277EN June 26, 2006
相关型号：
HLD010R2
Board Connector, 10 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Receptacle
AUK
HLD026R2
Board Connector, 26 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Receptacle
AUK
HLD030R2
Board Connector, 30 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Receptacle
AUK
HLD034R2
Board Connector, 34 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Receptacle
AUK
HLD044R2
Board Connector, 44 Contact(s), 2 Row(s), Male, Straight, 0.05 inch Pitch, Solder Terminal, Latch & Eject, Receptacle
AUK
©2020 ICPDF网 联系我们和版权申明