HLMP-1421A2 [AVAGO]
Single Color LED, Yellow, Tinted Nondiffused, T-1, 3mm;型号: | HLMP-1421A2 |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | Single Color LED, Yellow, Tinted Nondiffused, T-1, 3mm |
文件: | 总15页 (文件大小:317K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T-1 (3 mm) High Intensity
LED Lamps
Technical Data
HLMP-1340-G0000
HLMP-1321
HLMP-142x Series
HLMP-152x Series
Features
• High Intensity
• General Purpose Leads
• Reliable and Rugged
• Choice of 3 Bright Colors
High Efficiency Red
Yellow
High Performance Green
• Popular T-1 Diameter
Package
• Available on Tape and Reel
Description
This family of T-1 lamps is
specially designed for applica-
tions requiring higher on-axis
intensity than is achievable with a
standard lamp. The light
• Selected Minimum
Intensities
• Narrow Viewing Angle
generated is focused to a narrow
beam to achieve this effect.
Package Dimensions
Selection Guide
Minimum
Part
Number
Intensity
(mcd) at
10 mA
Color
(Material)
HLMP-
1340-G0000 Untinted
Nondiffused
Tinted
Description
8.6
8.6
9.2
9.2
6.7
6.7
High Efficiency Red
(GaAsP on GaP)
1321
1420
1421
1520
1521
Nondiffused
Untinted
Nondiffused
Yellow
(GaAsP on GaP)
Tinted
Nondiffused
Untinted
Nondiffused
Green (GaP)
Tinted
Nondiffused
2
Absolute Maximum Ratings at TA = 25°C
Parameter
Peak Forward Current
Average Forward Current[1]
DC Current[2]
Red
90
Yellow
60
Green
90
Units
mA
mA
mA
mW
V
25
20
25
30
20
30
Power Dissipation[3]
135
5
85
135
5
Reverse Voltage (IR = 100 µA)
5
Transient Forward Current[4]
500
500
500
mA
(10 µsec Pulse)
LED Junction Temperature
110
110
110
°C
°C
Operating Temperature Range
-55 to +100
-55 to +100
-20 to +100
Storage Temperature Range
-55 to +100
Lead Soldering Temperature
260°C for 5 seconds
[1.6 mm (0.063 in.) from body]
Notes:
1. See Figure 5 (Red), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. For Red and Green series derate power linearly from 25°C at 1.8 mW/°C. For Yellow series derate power linearly from 50°C at
1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED
die and wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the
Absolute Maximum Ratings.
3
Electrical Characteristics at TA = 25°C
Device
HLMP-
Test
Conditions
Symbol
Description
Min.
Typ.
Max. Units
IV
Luminous Intensity
1340-G0000 8.6
30
30
mcd
IF = 10 mA
(Figure 3)
1321
8.6
1420
1421
9.2
9.2
15
15
mcd
mcd
Deg.
IF = 10 mA
(Figure 8)
1520
1521
6.7
6.7
22
22
IF = 10 mA
(Figure 3)
2θ1/2
Including Angle Between
Half Luminous Intensity
Points
All
45
IF = 10 mA
See Note 1
(Figures 6, 11, 16, 21)
λPEAK
Peak Wavelength
1340-G0000
1321-G0000
635
nm
nm
nm
ns
Measurement
at Peak (Figure 1)
142X
152X
583
565
∆λ1/2
Spectral Line Halfwidth
Dominant Wavelength
Speed of Response
Capacitance
1340-G0000
1321-G0000
40
142X
152X
36
28
λd
1340-G0000
1321-G0000
626
See Note 2
(Figure 1)
142X
152X
585
569
τs
1340-G0000
1321-G0000
90
142X
152X
90
500
C
1340-G0000
1321-G0000
11
pF
VF = 0; f = 1 MHz
142X
152X
15
18
RθJ-PIN Thermal Resistance
All
290
°C/W
Junction to
Cathode Lead
VF
Forward Voltage
1340-G0000
1321-G0000
1.9
2.4
V
IF = 10 mA
142X
152X
2.0
2.1
2.4
2.7
VR
Reverse Breakdown
Voltage
All
5.0
V
IR = 100 µA
ηV
Luminous Efficacy
1340-G0000
1321-G0000
145
lumens See Note 3
Watt
142X
152X
500
595
Notes:
1. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the
color of the device.
3. Radiant intensity, Ie, in watts/steradian, may be found from the equation Ie = lv/ηv, where lv is the luminous intensity in candelas and
ηv is the luminous efficacy in lumens/watt.
4
Figure 1. Relative Intensity vs. Wavelength.
T-1 High Efficiency Red Non-Diffused
Figure 2. Forward Current vs.
Forward Voltage Characteristics.
Figure 3. Relative Luminous Intensity
vs. DC Forward Current.
Figure 4. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 5. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDC MAX
as per MAX Ratings).
Figure 6. Relative Luminous Intensity vs. Angular Displacement.
5
T-1 Yellow Non-Diffused
Figure 7. Forward Current vs.
Forward Voltage Characteristics.
Figure 8. Relative Luminous Intensity
vs. Forward Current.
Figure 9. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak Current.
Figure 10. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDCMAX
as per MAX Ratings).
Figure 11. Relative Luminous Intensity vs. Angular Displacement.
6
T-1 Green Non-Diffused
Figure 12. Forward Current vs.
Forward Voltage Characteristics.
Figure 13. Relative Luminous
Intensity vs. Forward Current.
Figure 14. Relative Efficiency
(Luminous Intensity per Unit Current)
vs. Peak LED Current.
Figure 15. Maximum Tolerable Peak
Current vs. Pulse Duration. (IDCMAX as
per MAX Ratings).
Figure 16. Relative Luminous Intensity vs. Angular Displacement.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 1999 Agilent Technologies, Inc.
November 30, 1999
Obsoletes 5964-9373E (4/96)
5968-4163E
Tape and Reel Options for T-13/4
(5 mm), T-1 (3 mm), LED Lamps
Technical Data
Option 01
Option 02
Features
Ordering Information
• Compatible with Radial Lead
Automatic Insertion
Equipment
• Meets Dimensional Specifi-
cations of IEC Publication
286 and ANSI/EIA Standard
RS-468 for Tape and Reel
• Reel Packaging Simplifies
Handling and Testing
• T-1 and T-1 3/4 LED Lamps
Available Packaged on Tape
and Reel
To order LED lamps packaged on
tape and reel, include the
appropriate option code along
with the device catalog part
number. Example: to order the
HLMP-3300 on tape and reel with
formed leads (5 mm lead spacing)
order as follows: HLMP-3300
Option 01. Minimum order
quantities vary by part number.
Orders must be placed in reel
increments. Please contact your
local Agilent sales office or
Caution: Agilent does not
recommend T-1 package, option
02 LEDs for auto-insertion. The
force exerted on the LED lead
frame during the cut and clinch
operation of auto-insertion may
result in cracking of the lamp
epoxy dome which results in
catastrophic failure. It is
• 5 mm (0.197 inch) Formed
Lead and 2.54 mm (0.100
inch) Straight Lead Spacing
Available
franchised Agilent distributor for
a complete list of lamps available
on tape and reel.
LED lamps with 0.46 mm (0.018
inch) square leads with 5 mm
(0.197 inch) lead spacing are
recommended for use with
Description
T-1 and T-13/4 LED lamps are
available on tape and reel as
specified by the IEC Publication
286 and ANSI/EIA Standard
RS-468. The Option 01 lamp
devices have formed leads with
5 mm (0.197 inch) spacing for
automatic insertion into PC
boards by radial lead insertion
equipment. The Option 02 lamp
devices have straight leads with
2.54 mm (0.100 inch) spacing,
packaged on tape and reel for
ease of handling. T-1 lamps are
packaged 1800/reel. T-13/4 lamps
are packaged 1300/reel.
suggested that insertion machine
compatibility be confirmed.
automatic insertion equipment.
Device Selection Guide
Option
Description
01
02
Tape and reel, 5 mm (0.197 inch) formed leads.
Tape and reel, 2.54 mm (0.100 inch) straight leads.
Package
T-1
Quantity/Reel
1800
Order Increments
1800
1300
T-13/4
1300
2
Notes:
Absolute Maximum
1. Minimum leader length at either end of
tape is 3 blank part spaces.
2. Silver saver paper is used as the
interlayer for silver plated lead devices.
3. The maximum number of consecutive
missing lamps is 3.
4. In accordance with EIA and IEC specs,
the anode lead leaves the reel first.
5. Drawings apply to devices with
0.46 mm (0.018 inch) square leads
only. Contact Agilent Sales Office for
dimensions of 0.635 mm (0.025 inch)
square lead devices.
Ratings and Electrical/
Optical Characteristics
The absolute maximum ratings,
mechanical dimension tolerances
and electrical/optical
characteristics for lamps
packaged on tape and reel are
identical to the basic catalog
device. Refer to the basic data
sheet for the specified values.
Tape and Reel LED Configurations
Figure 1. T-1 High Profile Lamps, Option 01.
Figure 2. T-1 High Profile Lamps, Option 02.
Figure 3. T-1 Low Profile Lamps, Option 01.
Figure 4. T-1 Low Profile Lamps, Option 02.
3
Tape and Reel LED Configurations (cont.)
Figure 6. T-13/4 High Profile Lamps, Option 02.
Figure 5. T-13/4 High Profile Lamps, Option 01.
Figure 7. T-13/4 Low Profile Lamps, Option 01.
Figure 8. T-13/4 Low Profile Lamps, Option 02.
4
Dimensional Specifications for Tape and Reel
Item
Option 01 02
Symbol
Specification
Notes
T1 High Profile
Body Height
A1
4.70 (0.185)
4.19 (0.165)
Body Diameter
D1
3.18 (0.125)
2.67 (0.105)
Component Height
H1
25.7 (1.012) Max.
Tl Low Profile
Body Height
A2
3.73 (0.147)
3.23 (0.127)
Body Diameter
D2
3.05 (0.120)
2.79 (0.110)
Component Height
H2
24.7 (0.974) Max.
T13/4 High Profile
Body Height
A3
9.19 (0.362)
8.43 (0.332)
Body Diameter
D3
5.08 (0.200)
4.32 (0.170)
Component Height
H3
30.2 (1.189) Max.
T13/4 Low Profile
Body Height
A4
6.35 (0.250)
5.33 (0.210)
Body Diameter
D4
5.08 (0.200)
4.32 (0.170)
Component Height
Lead Wire Thickness
Pitch of Component
H4
d
27.4 (1.079) Max.
0.45 (0.018)
Square Leads
P
13.7 (0.539)
11.7 (0.461)
Feed Hole Pitch
P0
12.9 (0.508)
12.5 (0.492)
Cumulative error:
1.0 mm/20 pitches
Feed Hole Center to Lead Center
P1
4.55 (0.179)
3.15 (0.124)
Measure at crimp
bottom 5.78/3.68
(0.227/0.1448) for
straight leads
Hole Center to Component Center
Lead to Lead Distance
P2
F
7.35 (0.289)
5.35 (0.211)
5.40 (0.213)
4.90 (0.193)
2.54 (0.100) nominal
for straight leads
Component Alignment, Front-rear
Tape Width
∆h
0 ± 1.0 (0.039)
Figure 9
W
18.5 (0.728)
17.5 (0.689)
Hold Down Tape Width
Hole Position
W0
W1
15.3 (0.602)
12.0 (0.472)
9.75 (0.384)
8.50 (0.335)
5
Dimensional Specifications for Tape and Reel (cont.)
Item
Option 01 02
Symbol
W2
Specification
Notes
Hold Down Tape Position
2.54 (0.100) Max.
Height of Component from Hole Center
H
21.0 (0.827)
20.0 (0.787)
Lead Clinch Height
Feed Hole Diameter
Total Tape Thickness
HO
DO
t
16.5 (0.650)
15.5 (0.610)
4.20 (0.165)
3.80 (0.150)
0.90 (0.035)
0.50 (0.020)
Paper thickness:
0.55 (0.022)
0.45 (0.018) Figure 9
Length of Snipped Lead
L
11.0 (0.433) Max.
14.5 (0.571) Min.
Lead Length Under Hold Down Tape
I1
Note:
1. Dimensions in millimetres (inches) maximum/minimum.
Figure 9. Front to Rear Alignment and
Tape Thickness, Typical All Device
Types.
Figure 10. Device Retention Tests and Specifications.
Figure 11. Reel Configuration and Labeling.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 1999 Agilent Technologies, Inc.
Obsoletes 5964-9375E (4/96)
5968-4164E (11/99)
T-1 (3 mm) Right Angle LED
Indicators
Technical Data
Option A1
Option A2
Features
• Ideal for Card Edge Status
Indication
• Package Design Allows Flush
Seating on a PC Board
• Housing Material Meets UL
94V-0 Rating
• Additional Catalog Lamps
Available as Options
• May be Side Stacked on
4.57 mm (0.18") Centers
Description
Agilent T-1 Right Angle Indicators
are industry standard status
indicators that incorporate a T-1
LED lamp in a black plastic right
angle mount housing. The
• Up to 8 Units May be
Coupled for a Horizontal
Array Configuration with a
Common Coupling Bar (See
T-1 Right Angle Array Data
Sheet)
• LEDs Available in All LED
Colors, With or Without
Integrated Current Limiting
Resistor in T-1 Packages
panel diagnostic indicators and
card edge logic status indicators.
indicators are available in
Standard Red, High Efficiency
Red, Orange, Yellow, and High
Performance Green, with or
without an integrated current
limiting resistor. These products
are designed to be used as back
Ordering Information
To order other T-1 High Dome
Lamps in Right Angle Housings in
addition to the parts indicated
above, select the base part
• Easy Flux Removal Design
Package Dimensions
2.41 (0.095)
REF.
6.43 (0.253)
4.65 (0.183)
MAX.
6.27 (0.247)
3.68 (0.145)
3.18 (0.125)
DIA.
7.44 (0.293)
7.29 (0.287)
5.21 (0.206)
4.95 (0.195)
CATHODE
OPTION NO. CATHODE LEAD
LENGTH
ANODE LEAD
LENGTH
SEE TABLE
A1
16.0 (0.630)
MIN.
1.27 (0.050)
NOM. LONGER UNEVEN LEADS
THAN CATHODE
UNSHEARED
A2
3.43 (0.135)
MIN.
3.43 (0.135)
MIN.
SHEARED
UNEVEN LEADS
1.27 (0.060)
NOM.
0.46 (0.018)
SQUARE NOM.
4.70 (0.185)
REF.
2.54 (0.100)
NOM.
NOTE: ALL DIMENSIONS ARE IN MILLIMETERS (INCHES).
number and add the option code
A1 or A2, depending on the lead
length desired. For example, by
ordering HLMP-1302 Option A1,
you would receive the long lead
option. By ordering HLMP-1302
Option A2, you would receive the
short lead option.
Arrays made by connecting two to
eight single Right Angle
Absolute Maximum
Ratings and Other
Electrical/Optical
Characteristics
The absolute maximum ratings
and typical device characteristics
are identical to those of the T-1
LED lamps. For information
about these characteristics, see
the data sheets of the equivalent
T-1 LED lamp.
Indicators with a Common
Coupling Bar are available.
Ordering information for arrays
may be found on the T-1 Right
Angle Array data sheet.
www.semiconductor.agilent.com
Data subject to change.
Copyright © 1999 Agilent Technologies, Inc.
Obsoletes 5965-9699E (5/97)
5968-4124E (11/99)
相关型号:
©2020 ICPDF网 联系我们和版权申明