HLMP-CB30-NPCYY [AVAGO]
Single Color LED, Blue, Untinted Nondiffused, T-1 3/4, 5mm, PLASTIC PACKAGE-2;型号: | HLMP-CB30-NPCYY |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | Single Color LED, Blue, Untinted Nondiffused, T-1 3/4, 5mm, PLASTIC PACKAGE-2 光电 可见光LED |
文件: | 总11页 (文件大小:350K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HLMP-Cxxx
T-13/4 (5 mm) Precision Optical Performance
InGaN Blue, Green and Cyan Lamps
Data Sheet
HLMP-CB15, HLMP-CB16, HLMP-CB30, HLMP-CB31, HLMP-CM15, HLMP-CM16, HLMP-CM30,
HLMP-CM31, HLMP-CE15, HLMP-CE16, HLMP-CE23, HLMP-CE24, HLMP-CE30, HLMP-CE31
Description
Features
These high intensity blue, green and cyan LEDs are based
on InGaN material technology. InGaN is the most efficient
and cost effective material for LEDs in the blue and green
region of the spectrum. The 472 nm typical dominant
wavelength for blue and 526 nm typical dominant wave-
length for green are well suited to color mixing in full
color signs. The 505 nm typical dominant wavelength
matches international specifications for green traffic
signals. These LED lamps are untinted, nondiffused, T-
13/4 packages incorporating second generation optics
which produce well defined spatial radiation patterns
at specific viewing cone angles. These lamps are made
with an advanced optical grade epoxy, offering superior
high temperature and high moisture resistance perfor-
mance in outdoor signal and sign applications. The high
maximum LED junction temperature limit of +130°C
enables high temperature operation in bright sunlight
conditions. The package epoxy contains both UV-A
and UV-B inhibitors to reduce the effects of long term
exposure to direct sunlight. These lamps are available
in two viewing angle for Green and Blue, and 3 viewing
angles options for Cyan to give the designer flexibility
with optical design.
• Well defined spatial radiation pattern
• Viewing angles: 15° , 23º and 30°
• High luminous output
• Colors: 472 nm Blue, 526 nm Green, 505 nm Cyan
• Superior resistance to moisture
• UV resistant epoxy
Benefits
• Superior performance in outdoor environments
• Wavelengths suitable for color mixing in full color
(RGB) signs
Applications
• Commercial outdoor signs
• Automotive interior lights
• Front panel indicators
• Front panel backlighting
CAUTION: HLMP-CBxx, HLMP-CMxx and HLMP-CExx LEDs are Class 1C ESD sensitive. Please observe appropriate
precautions during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
Device Selection Guide
Luminous Intensity,
Typical
Color and Typ.
[3,4,5]
Iv (mcd) at 20 mA
Min.
880
Viewing Angle Dominant Wavelength
2q (Deg)
1/2
Leads with
Stand-Offs
Package
Drawing
[1]
[2]
Part Number
λd (nm)
Max.
-
HLMP-CB15-P00xx
HLMP-CB15-QT0xx
HLMP-CB15-R00xx
HLMP-CB15-RSCxx
HLMP-CB16-P00xx
HLMP-CB16-QT0xx
HLMP-CM15-S00xx
HLMP-CM15-SV0xx
HLMP-CM15-VY0xx
HLMP-CM15-W00xx
HLMP-CM15-WXBxx
HLMP-CM15-WZ0xx
HLMP-CM16-S00xx
HLMP-CM16-VY0xx
HLMP-CM16-WYGxx
HLMP-CE15-VWCxx
HLMP-CE15-WZCxx
HLMP-CE15-WZQxx
HLMP-CE16-UXQxx
HLMP-CE16-WZBxx
HLMP-CE16-WZCxx
HLMP-CE16-WZQxx
HLMP-CEꢀ3-UVQxx
HLMP-CEꢀ3-UXCxx
HLMP-CEꢀ3-UXQxx
HLMP-CEꢀ3-VWCxx
HLMP-CEꢀ3-VWQxx
HLMP-CEꢀ3-VXQxx
HLMP-CEꢀ3-VYCxx
HLMP-CEꢀ4-UX0xx
HLMP-CEꢀ4-UXCxx
HLMP-CEꢀ4-UXQxx
HLMP-CEꢀ4-VXQxx
HLMP-CEꢀ4-VYCxx
HLMP-CEꢀ4-VYQxx
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
15°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
ꢀ3°
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
No
No
No
No
Yes
Yes
No
No
No
No
No
No
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
A
A
A
A
B
B
A
A
A
A
A
A
B
B
B
A
A
A
B
B
B
B
A
A
A
A
A
A
A
B
B
B
B
B
B
1150
1500
1500
880
3ꢀ00
-
ꢀ500
-
1150
1900
1900
4ꢀ00
5500
5500
5500
1900
4ꢀ00
5500
4ꢀ00
5500
5500
3ꢀ00
5500
5500
5500
3ꢀ00
3ꢀ00
3ꢀ00
4ꢀ00
4ꢀ00
4ꢀ00
4ꢀ00
3ꢀ00
3ꢀ00
3ꢀ00
4ꢀ00
4ꢀ00
4ꢀ00
3ꢀ00
-
5500
1ꢀ000
-
9300
16000
-
1ꢀ000
1ꢀ000
7ꢀ00
16000
16000
9300
16000
16000
16000
5500
9300
9300
7ꢀ00
7ꢀ00
9300
1ꢀ000
9300
9300
9300
9300
1ꢀ000
1ꢀ000
ꢀ
Device Selection Guide (Continued)
Luminous Intensity,
Typical
Viewing Angle
2q (Deg)
1/2
Color and Typ.
[3,4,5]
Iv (mcd) at 20 mA
Min.
310
Dominant Wavelength
Leads with
Stand-Offs
Package
Drawing
[1]
[2]
Part Number
λd (nm)
Max.
-
HLMP-CB30-K00xx
HLMP-CB30-M00xx
HLMP-CB30-NPCxx
HLMP-CB30-NRGxx
HLMP-CB30-PQCxx
HLMP-CB31-M00xx
HLMP-CB31-NRGxx
HLMP-CB31-PQCxx
HLMP-CM30-M00xx
HLMP-CM30-RSBxx
HLMP-CM30-S00xx
HLMP-CM30-TUCxx
HLMP-CM30-TW0xx
HLMP-CM30-TWAxx
HLMP-CM30-UVAxx
HLMP-CM30-UVCxx
HLMP-CM31-M00xx
HLMP-CM31-S00xx
HLMP-CM31-S0Dxx
HLMP-CM31-TUCxx
HLMP-CM31-TW0xx
HLMP-CM31-TWAxx
HLMP-CM31-UVCxx
HLMP-CM31-VWCxx
HLMP-CE30-RSCxx
HLMP-CE30-RUCxx
HLMP-CE30-STQxx
HLMP-CE30-SVCxx
HLMP-CE30-SVQxx
HLMP-CE31-SVCxx
HLMP-CE31-SVQxx
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Blue 47ꢀ
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Green 5ꢀ6
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
Cyan 505
No
No
No
No
No
Yes
Yes
Yes
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
Yes
Yes
A
A
A
A
A
B
B
B
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
A
A
A
A
A
B
B
5ꢀ0
-
680
1150
1900
1500
-
680
880
5ꢀ0
680
1900
1500
-
880
5ꢀ0
1500
1900
ꢀ500
ꢀ500
ꢀ500
3ꢀ00
3ꢀ00
5ꢀ0
ꢀ500
-
4ꢀ00
7ꢀ00
7ꢀ00
5500
5500
-
1900
1900
ꢀ500
ꢀ500
ꢀ500
3ꢀ00
4ꢀ00
1500
1500
1900
1900
1900
1900
1900
-
-
4ꢀ00
7ꢀ00
7ꢀ00
5500
7ꢀ00
ꢀ500
4ꢀ00
3ꢀ00
5500
5500
5500
5500
Notes:
1. q is the off-axis angle where the luminous intensity is one half the on-axis intensity.
1/2
2. Dominant Wavelength, λd, is derived from the CIE Chromaticity. Diagram and represents the color of the lamp.
3. The luminous intensity is measured on the mechanical axis of the lamp package.
4. The optical axis is closely aligned with the package mechanical axis.
5. Tolerance for each intensity bin limit is 15ꢀ.
3
Part Numbering System
HLMP - X X XX - X X X XX
Mechanical Options
00: Bulk
DD: Ammo Pack
YY: Flexi bin, Bulk
ZZ: Flexi bin, Ammo Pack
Color Bin Selection
0: Full color range
A: Color bin 1 & 2 only
B: Color bin 2 & 3 only
C: Color bin 3 & 4 only
G: Color bin 2, 3 & 4 only
Q: Color bin 7 & 8 only
Maximum Intensity Bin
0: No maximum Iv bin limit
Others: Refer to Intensity Bin Limit Table
Minimum Intensity Bin
Refer to Device Selection Guide
Viewing Angle and Standoff Options
15: 15 degree without standoff
16: 15 degree with standoff
23: 23 degree without standoff
24: 23 degree with standoff
30: 30 degree without standoff
31: 30 degree with standoff
Color
B: Blue
M: Green
E: Cyan
Package
C: T-1 3/4 (5 mm) round lamp
4
Package Dimensions
Package A
Package B
5.00 ± 0.20
(0.197 ± 0.008)
5.00 ± 0.20
(0.197 ± 0.008)
1.14 ± 0.20
(0.045 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
8.71 ± 0.20
(0.343 ± 0.008)
d
1.14 ± 0.20
(0.045 ± 0.008)
2.35 (0.093)
MAX.
0.70 (0.028)
MAX.
1.50 ± 0.15
31.60
MIN.
(0.059 ± 0.006)
31.60
MIN.
(1.244)
(1.244)
0.70 (0.028)
MAX.
CATHODE
LEAD
CATHODE
LEAD
0.50 ± 0.10
(0.020 ± 0.004)
0.50 ± 0.10
(0.020 ± 0.004)
SQ. TYP.
SQ. TYP.
1.00
MIN.
1.00
MIN.
(0.039)
(0.039)
5.80 ± 0.20
(0.228 ± 0.008)
5.80 ± 0.20
(0.228 ± 0.008)
CATHODE
FLAT
CATHODE
FLAT
2.54 ± 0.38
(0.100 ± 0.015)
2.54 ± 0.38
(0.100 ± 0.015)
HLMP-Cx16
d = 1ꢀ.6 0.18
(0.496 0.007)
HLMP-Cx24
HLMP-Cx31
d = 1ꢀ.ꢀꢀ 0.50
(0.481 0.0ꢀ0)
d = 1ꢀ.40 0.ꢀ5
(0.488 0.010)
Notes:
1. Dimensions in mm.
2. Tolerance 0.1 mm unless otherwise noted.
5
Absolute Maximum Ratings at T = 25°C
A
Parameter
Value
30
Units
mA
[1]
DC Forward Current
Peak Forward Current
100
mA
Power Dissipation
Blue
Green / Cyan
mW
111
117
Reverse Voltage (IR= 100 µA)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
5
V
130
°C
°C
°C
-40 to +80
-40 to +100
Note:
1. Derate linearly as shown in Figure 4 for temperatures above 50°C.
2. Duty Factor 10ꢀ, 1kHz
Electrical/Optical Characteristics at T = 25°C
A
Parameter
Symbol
Min.
Typ.
Max.
Units
Test Conditions
I = ꢀ0 mA
Forward Voltage
Blue
Green / Cyan
V
F
V
F
3.ꢀ
3.ꢀ
3.7
3.9
Reverse Voltage
V
R
5
I = 100 µA
R
Peak Wavelength
l
nm
nm
Peak of Wavelength of
Spectral Distribution at I = ꢀ0 mA
peak
Blue (λd = 47ꢀ nm)
Green (λd = 5ꢀ6 nm)
Cyan (λd = 505 nm)
470
5ꢀ4
50ꢀ
F
Spectral Halfwidth
Blue (λd = 47ꢀ nm)
Green (λd = 5ꢀ6 nm)
Cyan (λd = 505 nm)
Dl
Wavelength Width at Spectral Power
1/ꢀ
35
47
35
Point at I = ꢀ0 mA
F
Capacitance
Blue/ Green
Cyan
C
pF
V = 0, F = 1 MHz
F
43
40
Luminous Efficacy
Blue (λd = 47ꢀ nm)
Green (λd = 5ꢀ6 nm)
Cyan (λd = 505 nm)
ηv
lm/W
Emitted Luminous Power/Emitted
Radiant Power
75
5ꢀ0
350
Thermal Resistance
Rq
J-PIN
ꢀ40
°C/W
LED Junction-to-Cathode Lead
Notes:
1. The dominant wavelength, l , is derived from the CIE Chromaticity Diagram and represents the perceived color of the device.
d
2. The radiant intensity, le in watts per steradian, may be found from the equation le = I /h , where Iv is the luminous intensity in candelas and hV is
V
V
the luminous efficacy in lumens/watt.
6
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
35
30
25
20
15
10
5
Cyan
Blue
Green/ Cyan
Green
Blue
0
0
0.5
1
1.5
2
2.5
3
3.5
4
380
430
480
530
580
630
680
730
780
FORWARD VOLTAGE - V
WAVELENGTH - nm
Figure 1. Relative intensity vs. wavelength.
Figure 2 : Forward current vs. forward voltage.
1.5
40
35
30
25
20
1.0
0.5
0
15
10
5
0
0
10
20
25
30
0
20
40
60
80
100
5
15
- FORWARD CURRENT - mA
TA - AMBIENT TEMPERATURE - oC
IF
Figure 3. Relative luminous intensity vs. forward current.
Figure 4. Maximum forward current vs. ambient temperature.
1.030
1.025
1.020
1.015
0.9
0.8
0.7
0.6
1.010
0.5
0.4
Blue
Cyan
1.005
Green
1.000
0.3
0.2
0.995
0.990
0.1
0
-30
0
5
10
15
20
25
30
35
-20
-10
0
10
20
3 0
DC FORWARD CURRENT - mA
ANGULAR DISPLACEMENT - DEGREES
Figure 5. Color vs. forward current
Figure 6. Spatial radiation pattern – 15° lamps.
1.0
0.9
0.8
0.7
0.6
0.5
0.5
0.4
0.3
0.2
0.1
0
-40
0
-50 -40
-30 -20
-10
0
10
20
30
40
50
-30
-20
-10
0
10
20
30
40
ANGLE - DEGREES
ANGULAR DISPLACEMENT - DEGREES
Figure 7. Spatial radiation pattern – 23° lamps.
Figure 8. Spatial radiation pattern – 30° lamps.
7
Color Bin Limits (nm at 20 mA)
Intensity Bin Limits
Blue
Bin ID
Color Range (nm)
Bin Name
Min.
310
400
5ꢀ0
680
Max.
400
5ꢀ0
680
880
1150
1500
1900
ꢀ500
3ꢀ00
4ꢀ00
5500
7ꢀ00
9300
1ꢀ000
16000
Min.
Max.
464.0
468.0
47ꢀ.0
476.0
480.0
K
L
1
ꢀ
3
4
5
460.0
464.0
468.0
47ꢀ.0
476.0
M
N
P
Q
R
S
880
1150
1500
1900
ꢀ500
3ꢀ00
4ꢀ00
5500
7ꢀ00
9300
1ꢀ000
Tolerance for each bin limit is 0.5 nm.
T
Green
Bin ID
Color Range (nm at 20mA)
U
V
W
X
Y
Z
Min.
5ꢀ0.0
5ꢀ4.0
5ꢀ8.0
53ꢀ.0
536.0
Max.
5ꢀ4.0
5ꢀ8.0
53ꢀ.0
536.0
540.0
1
ꢀ
3
4
5
Tolerance for each intensity bin limit is 15ꢀ.
Tolerance for each bin limit is 0.5 nm.
Note:
Cyan
Color Range (nm)
1. All bin categories are established for classification of products.
Products may not be available in all bin categories. Please contact
your Avago representatives for further information.
Bin ID
Min.
Max.
1
ꢀ
3
4
7
8
495
500
505
498
503
500
505
510
503
508
Tolerance for each bin limit is 0.5 nm
Relative Light Output vs. Junction Temperature
1.6
1.4
Cyan
1.2
Green
Blue
1
0.8
0.6
0.4
0.2
0
-40
-20
0
20
TJ
40
60
80
°C
100
120
140
- JUNCTION TEMPERATURE -
8
Precautions:
Lead Forming:
Avago Technologies LED configuration
• The leads of an LED lamp may be performed or cut to
length prior to insertion and soldering on PC board.
• If lead forming is required before soldering, care must
be taken to avoid any excessive mechanical stress that
induced into the LED package. Otherwise, cut the
leads to applicable length after soldering process at
room temperature. The solder joint formed will absorb
the mechanical stress, due to the lead cutting, from
traveling to the LED chip die attach and wirebond.
Cathode
• For better control, it is recommended to use proper
tool to precisely form and cut the leads to applicable
length rather than doing it manually.
Note: Electrical connection between bottom surface of LED die and
the lead frame material through conductive paste of solder.
Soldering condition:
• If necessary, use fixture to hold the LED component
in proper orientation with respect to the PCB during
soldering process.
• Care must be taken during PCB assembly and
soldering process to prevent damage to the LED
component.
• At elevated temperature, the LED is more susceptible
to mechanical stress. Therefore, PCB must allowed to
cool down to room temperature prior to handling,
which includes removal of jigs, fixtures or pallet.
• Special attention must be given to board fabrication,
solder masking, surface platting and lead holes size
and component orientation to assure the solderability.
• The closest manual soldering distance of the soldering
heat source (soldering iron’s tip) to the body is
1.59mm. Soldering the LED closer than 1.59mm might
damage the LED.
1.59mm
• Recommended PC board plated through holes size for
LED component leads.
• Recommended soldering condition:
LED component
lead size
Plated through
hole diameter
Diagonal
Manual Solder
Wave Soldering
Pre-heat temperature 105 °C Max.
Dipping
0.457 x 0.457 mm
0.646 mm
0.976 to 1.078 mm
(0.038 to 0.04ꢀ inch)
(0.018 x 0.018 inch) (0.0ꢀ5 inch)
0.508 x 0.508 mm 0.718 mm
(0.0ꢀ0 x 0.0ꢀ0 inch) (0.0ꢀ8 inch)
-
1.049 to 1.150 mm
(0.041 to 0.045 inch)
Preheat time
Peak temperature
Dwell time
30 sec Max
ꢀ50 °C Max.
3 sec Max.
-
ꢀ60 °C Max.
5 sec Max
• Over sizing of plated through hole can lead to twisting
or improper LED placement during auto insertion.
Under sizing plated through hole can lead to
mechanical stress on the epoxy lens during clinching.
• Wave soldering parameter must be set and maintain
according to the recommended temperature and
dwell time. Customer is advised to daily check on the
soldering profile to ensure that the soldering profile
is always conforming to recommended soldering
condition.
Note: Refer to application note AN1027 for more information on
soldering LED components.
Note:
1. PCB with different size and design (component density) will
have different heat mass (heat capacity). This might cause a
change in temperature experienced by the board if same wave
soldering setting is used. So, it is recommended to re-calibrate
the soldering profile again before loading a new type of PCB.
2. Avago Technologies’ high brightness LED are using high
efficiency LED die with single wire bond as shown below.
Customer is advised to take extra precaution during wave
soldering to ensure that the maximum wave temperature is
not exceeding 250°C. Over-stressing the LED during soldering
process might cause premature failure to the LED due to
delamination.
9
Recommended Wave Soldering Profile
LAMINAR WAVE
HOT AIR KNIFE
TURBULENT WAVE
250
200
150
TOP SIDE
OF PC BOARD
BOTTOM SIDE
OF PC BOARD
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
FLUXING
PREHEAT SETTING = 150
SOLDER WAVE TEMPERATURE = 245
AIR KNIFE AIR TEMPERATURE = 390
°C (100°C PCB)
°C
5ꢁC
°
C
100
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40
SOLDER: SN63; FLUX: RMA
LEAD FREE SOLDER
96.5ꢀSn; 3.0ꢀAg; 0.5ꢀ Cu
50
30
NOTE: ALLOW FOR BOARDS TO BE
SUFFICIENTLY COOLED BEFORE
EXERTING MECHANICAL FORCE.
PREHEAT
0
10
20
30
40
50
60
70
80
90
100
TIME - SECONDS
Ammo Packs Drawing
12.70±1.00
0.50±0.0394
6.35±1.30
0.25±0.0512
CATHODE
20.50±1.00
0.807±0.039
9.125±0.625
0.3593±0.0246
18.00±0.50
0.7087±0.0197
∅4.00±0.20TYP.
0.1575±0.008
A
A
12.70±0.30
0.50±0.0118
VIEW A-A
0.70±0.20
0.0276±0.0079
Note: The ammo-packs drawing is applicable for packaging option –DD & -ZZ and regardless standoff or non-standoff
10
Packaging Box for Ammo Packs
Note: For InGaN device, the ammo pack packaging box contain ESD logo
DISCLAIMER
AVAGO TECHNOLOGIES’ PRODUCTS AND SOFTWARE ARE NOT SPECIFICALLY DESIGNED, MANUFACTURED OR AU-
THORIZED FOR SALE AS PARTS, COMPONENTS OR ASSEMBLIES FOR THE PLANNING, CONSTRUCTION, MAINTENANCE
OR DIRECT OPERATION OF A NUCLEAR FACILITY OR FOR USE IN MEDICAL DEVICES OR APPLICATIONS. CUSTOMER IS
SOLELY RESPONSIBLE, AND WAIVES ALL RIGHTS TO MAKE CLAIMS AGAINST AVAGO OR ITS SUPPLIERS, FOR ALL LOSS,
DAMAGE, EXPENSE OR LIABILITY IN CONNECTION WITH SUCH USE.
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © ꢀ007 Avago Technologies Limited. All rights reserved.
AV0ꢀ-0ꢀ13EN - March ꢀ1, ꢀ007
相关型号:
HLMP-CB30-NPCZZ
Single Color LED, Blue, Untinted Nondiffused, T-1 3/4, 5mm, PLASTIC PACKAGE-2
AGILENT
©2020 ICPDF网 联系我们和版权申明