HLMP-D401-EF002 [AVAGO]
T-1 3/4 SINGLE COLOR LED, ORANGE, 5mm, PLASTIC PACKAGE-2;型号: | HLMP-D401-EF002 |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | T-1 3/4 SINGLE COLOR LED, ORANGE, 5mm, PLASTIC PACKAGE-2 光电 |
文件: | 总11页 (文件大小:215K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HLMP-3301, HLMP-3401, HLMP-3507, HLMP-3762,
HLMP-3862, HLMP-3962, HLMP-D401
3
T-1 / (5 mm) Diffused LED Lamps
4
Data Sheet
Description
Features
• High intensity
3
This family of T-1 / tinted, diffused LED lamps is
4
widely used in general purpose indicator applications.
Diffusants, tints, and optical design are balanced to yield
superior light output and wide viewing angles. Several
intensity choices are available in each color for increased
design flexibility.
• Choice of 4 bright colors
– High Efficiency Red
– Orange
– Yellow
– High Performance Green
3
• Popular T-1 / diameter package
4
Selection Guide
• Selected minimum intensities
• Wide viewing angle
Luminous Intensity
Material/
Color
Iv (mcd) at 10 mA
Part Number
Min.
5.4
2.1
5.4
5.4
8.6
8.6
5.7
5.7
5.7
9.2
5.4
3.4
4.2
4.2
6.7
10.6
10.6
Max.
–
• General purpose leads
• Reliable and rugged
HLMP-3301
HLMP-3301-D00xx
HLMP-3301-F00xx
HLMP-3301-FG0xx
HLMP-3762
–
• Available on tape and reel
GaP HER
–
17.2
–
HLMP-3762-G00xx
HLMP-3401
–
–
GaP Yellow HLMP-3401-E00xx
HLMP-3401-EF0xx
HLMP-3862
–
18.4
–
GaP Orange HLMP-D401
HLMP-D401-EF0xx
HLMP-3507
–
10.8
–
HLMP-3507-D00xx
–
GaP Green
HLMP-3507-EF0xx
HLMP-3962
21.2
–
HLMP-3962-F00xx
–
Part Numbering System
HLMP - x x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
B1: Right Angle Housing, Uneven Leads
B2: Right Angle Housing, Even Leads
DD: Ammo Pack
R4: Tape & Reel, Counter Clockwise
Color Bin Options
0: Full Color Bin Distribution
B: Color Bins 2 & 3 only
Maximum Iv Bin Options
0: Open (no max. limit)
Others: Please refer to the Iv Bin Table
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Brightness Level
0x: Less Brightness
62: Higher Brightness
Color Options
3,7: GaP HER
4,8: GaP Yellow (except D4xx)
5,9: GaP Green
Package Options
3: T-1 3/4 (5 mm)
D: T-1 3/4 (5 mm) GaP Orange
Package Dimensions
0.89 (0.035)
0.64 (0.025)
6.10 (0.240)
5.59 (0.220)
SQUARE TYP.
0.55 (0.022)
0.40 (0.016)
0.65 (0.026) max
5.08 (0.200)
4.57 (0.180)
CATHODE LEAD
9.19 (0.362)
8.43 (0.332)
1.27(0.050)
NOM.
2.54 (0.100) NOM.
25.40(1.00)
MINIMUM
Notes:
1. All dimensions are in mm (inches).
2. An epoxy meniscus may extend about 1 mm (0.040") down the leads.
3. For PCB hole recommendations, see the Precautions section.
2
Optical/Electrical Characteristics at T = 25°C
A
Test
Symbol
2q1/2
Parameter
Color
Min.
Typ.
60
60
60
60
Max.
Units
Deg.
Condition
IF = 10 mA
See Note 1
Included Angle
Between Half
Luminous Intensity
Points
High Efficiency Red
Orange
Yellow
Green
lPEAK
Peak Wavelength
High Efficiency Red
Orange
Yellow
Green
HER/Orange
Yellow
Green
High Efficiency Red
Orange
Yellow
Green
High Efficiency Red
Orange
Yellow
Green
High Efficiency Red
Orange
635
600
583
565
40
nm
Measurement
at Peak
Dl1/2
Spectral Line Halfwidth
Dominant Wavelength
nm
nm
36
28
ld
626
602
585
569
90
280
90
500
11
See Note 2
ts
Speed of Response
Capacitance
ns
C
pF
VF = 0;
f = 1 MHz
4
Yellow
15
Green
18
RqJ-PIN
Thermal Resistance
Forward Voltage
All
260
°C/W
V
Junction to
Cathode Lead
IF = 10 mA
VF
HER/Orange
Yellow
Green
1.9
2.0
2.1
2.4
2.4
2.7
VR
Reverse Breakdown
Voltage
Luminous Efficacy
All
5.0
–
V
IR = 100 µA
See Note 3
hV
High Efficiency Red
Orange
Yellow
145
380
500
595
lumens
Watt
–
Green
Notes:
1
1. q / is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2
2. The dominant wavelength, l , is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of
d
the device.
3. Radiant intensity, I , in Watts/steradian, may be found from the equation I = I /h , where I is the luminous intensity in candelas and h is the
e
e
v
v
v
v
luminous efficacy in lumens/Watt.
3
Absolute Maximum Ratings at T = 25°C
A
Green/
Emerald Green
Parameter
HER/Orange
Yellow
60
Units
mA
mA
mA
mW
V
Peak Forward Current
Average Forward Current[1]
DC Current[2]
90
25
30
135
5
90
25
30
135
5
20
20
Power Dissipation[3]
85
Reverse Voltage (IR = 100 µA)
5
Transient Forward Current[4]
(10 µsec Pulse)
500
500
500
mA
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Notes:
110
110
110
°C
°C
°C
-40 to +100
-40 to +100
-40 to +100
-40 to +100
-20 to +100
-40 to +100
1. See Figure 5 (Red/Orange), 10 (Yellow), or 15 (Green) to establish pulsed operating conditions.
2. For Red, Orange and Green series derate linearly from 50°C at 0.5 mA/°C. For Yellow series derate linearly from 50°C at 0.2 mA/°C.
3. 1.8 mW/°C. For Yellow series derate power linearly from 50°C at 1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and
wirebond. It is not recommended that the device be operated at peak currents beyond the peak forward current listed in the Absolute Maxi-
mum Ratings.
1.0
ORANGE
T = 25° C
A
EMERALD GREEN
GREEN
HIGH EFFICIENCY RED
0.5
YELLOW
0
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative intensity vs. wavelength
4
3
T-1 / High Efficiency Red, Orange Diffused Lamps
4
Figure 2. Forward current vs. forward voltage
characteristics
Figure 3. Relative luminous intensity vs.
DC forward current
Figure 4. Relative efficiency (luminous intensity per
unit current) vs. peak LED current
Figure 5. Maximum tolerable peak current vs.
Figure 6. Relative luminous intensity vs. angular displacement
pulse duration. (I MAX as per MAX ratings)
DC
5
3
T-1 / Yellow Diffused Lamps
4
Figure 7. Forward current vs. forward voltage
characteristics
Figure 8. Relative luminous intensity vs.
forward current
Figure 9. Relative efficiency (luminous intensity per
unit current) vs. peak current
Figure 11. Relative luminous intensity vs. angular displacement
Figure 10. Maximum tolerable peak current vs.
pulse duration. (I MAX as per MAX ratings)
DC
6
3
T-1 / Green/Emerald Green Diffused Lamps
4
Figure 12. Forward current vs. forward voltage
characteristics
Figure 13. Relative luminous intensity vs.
DC forward current
Figure 14. Relative efficiency (luminous intensity per
unit current) vs. peak LED current
Figure 15. Maximum tolerable peak current vs.
Figure 16. Relative luminous intensity vs. angular displacement
pulse duration. (I MAX as per MAX ratings)
DC
7
Intensity Bin Limits
Intensity Range (mcd)
Min.
2.4
Color
Bin
D
E
Max.
3.8
3.8
6.1
F
6.1
9.7
G
H
I
9.7
15.5
15.5
24.8
24.8
39.6
J
39.6
63.4
K
L
63.4
101.5
162.4
234.6
340.0
540.0
850.0
1200.0
1700.0
2400.0
3400.0
4900.0
7100.0
10200.0
14800.0
21400.0
30900.0
10.3
101.5
162.4
234.6
340.0
540.0
850.0
1200.0
1700.0
2400.0
3400.0
4900.0
7100.0
10200.0
14800.0
21400.0
6.5
M
N
O
P
Red/Orange
Q
R
S
T
U
V
W
X
Y
Z
E
F
10.3
16.6
G
H
I
16.6
26.5
26.5
42.3
42.3
67.7
J
67.7
108.2
173.2
250.0
360.0
510.0
800.0
1250.0
1800.0
2900.0
4700.0
7200.0
11700.0
18000.0
27000.0
K
L
108.2
173.2
250.0
360.0
510.0
800.0
1250.0
1800.0
2900.0
4700.0
7200.0
11700.0
18000.0
M
N
O
P
Yellow
Q
R
S
T
U
V
W
8
Intensity Bin Limits, continued
Intensity Range (mcd)
Min.
4.7
Color
Bin
D
E
Max.
7.6
7.6
12.0
F
12.0
19.1
G
H
I
19.1
30.7
30.7
49.1
49.1
78.5
J
78.5
125.7
201.1
289.0
417.0
680.0
1100.0
1800.0
2700.0
4300.0
6800.0
10800.0
16000.0
25000.0
40000.0
K
125.7
201.1
289.0
417.0
680.0
1100.0
1800.0
2700.0
4300.0
6800.0
10800.0
16000.0
25000.0
L
Green
M
N
O
P
Q
R
S
T
U
V
W
Maximum tolerance for each bin limit is 18ꢀ.
Color Categories
Lambda (nm)
Min.
Color
Category #
Max.
6
5
4
3
2
1
3
2
4
5
1
2
3
4
5
6
7
8
561.5
564.5
567.5
570.5
573.5
582.0
584.5
587.0
589.5
592.0
597.0
599.5
602.0
604.5
607.5
610.5
613.5
616.5
564.5
567.5
570.5
573.5
576.5
584.5
587.0
589.5
592.0
593.0
599.5
602.0
604.5
607.5
610.5
613.5
616.5
619.5
Green
Yellow
Orange
Tolerance for each bin limit is 0.5 nm.
9
Mechanical Option Matrix
Mechanical Option Code
Definition
00
Bulk Packaging, minimum increment 500 pcs/bag
01
Tape & Reel, crimped leads, minimum increment 1300 pcs/bag
Tape & Reel, straight leads, minimum increment 1300 pcs/bag
Right Angle Housing, uneven leads, minimum increment 500 pcs/bag
Right Angle Housing, even leads, minimum increment 500 pcs/bag
Ammo Pack, straight leads with minimum increment 2K/pack
Tape & Reel, straight leads, counter clockwise, anode lead leaving the reel first
02
B1
B2
DD
R4
Note:
All categories are established for classification of products. Products may not be available in all categories. Please contact your local Avago repre-
sentative for further clarification/information.
10
Precautions
Lead Forming
• Wave soldering parameter must be set and maintained
accordingtorecommendedtemperatureanddwelltime
in the solder wave. Customer is advised to periodically
check on the soldering profile to ensure the soldering
profile used is always conforming to recommended
soldering condition.
• The leads of an LED lamp may be preformed or cut to
length prior to insertion and soldering into PC board.
• Ifleadformingisrequiredbeforesoldering,caremustbe
taken to avoid any excessive mechanical stress induced
toLEDpackage.Otherwise,cuttheleadsofLEDtolength
aftersolderingprocessatroomtemperature.Thesolder
joint formed will absorb the mechanical stress of the
lead cutting from traveling to the LED chip die attach
and wirebond.
• If necessary, use fixture to hold the LED component
in proper orientation with respect to the PCB during
soldering process.
• Properhandlingisimperativetoavoidexcessivethermal
stresses to LED components when heated. Therefore,
the soldered PCB must be allowed to cool to room
temperature, 25°C, before handling.
• It is recommended that tooling made to precisely form
and cut the leads to length rather than rely upon hand
operation.
Soldering Conditions
• Care must be taken during PCB assembly and soldering
process to prevent damage to LED component.
• Special attention must be given to board fabrication,
solder masking, surface plating and lead holes size and
component orientation to assure solderability.
• The closest LED is allowed to solder on board is 1.59
mmbelowthebody(encapsulantepoxy)forthoseparts
without standoff.
• Recommended PC board plated through hole sizes for
LED component leads:
• Recommended soldering conditions:
LED Component
Lead Size
Diagonal
Plated Through-
Hole Diameter
Manual Solder
Lead size (typ.) 0.45 × 0.45 mm
0.636 mm
0.98 to 1.08 mm
(0.039 to 0.043 in)
Wave Soldering
Pre-heat Temperature 105 °C Max.
Dipping
–
(0.018 × 0.018 in.) (0.025 in)
Dambar shear- 0.65 mm
off area (max.) (0.026 in)
0.919 mm
(0.036 in)
Pre-heat Time
Peak Temperature
Dwell Time
30 sec Max.
250 °C Max.
3 sec Max.
–
260 °C Max.
5 sec Max.
Lead size (typ.) 0.50 × 0.50 mm
0.707 mm
1.05 to 1.15 mm
(0.041 to 0.045 in)
(0.020 × 0.020 in.) (0.028 in)
Dambar shear- 0.70 mm
off area (max.) (0.028 in)
0.99 mm
(0.039 in)
Note: Refer to application note AN1027 for more information on
soldering LED components.
LAMINAR WAVE
HOT AIR KNIFE
TURBULENT WAVE
BOTTOM SIDE
OF PC BOARD
250
200
150
100
TOP SIDE OF
PC BOARD
CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN)
PREHEAT SETTING = 150°C (100°C PCB)
SOLDER WAVE TEMPERATURE = 245°C
AIR KNIFE AIR TEMPERATURE = 390°C
AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.)
AIR KNIFE ANGLE = 40°
FLUXING
PREHEAT
SOLDER: SN63; FLUX: RMA
NOTE: ALLOW FOR BOARDS TO BE
SUFFICIENTLY COOLED BEFORE EXERTING
MECHANICAL FORCE.
50
30
0
10 20 30 40 50 60 70 80 90 100
TIME – SECONDS
Figure 17. Recommended wave soldering profile
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2013 Avago Technologies. All rights reserved. Obsoletes 5989-4258EN
AV02-1558EN - June 18, 2013
相关型号:
©2020 ICPDF网 联系我们和版权申明