HSMF-A211-A00J1 [AVAGO]
Surface Mount LED Indicators, PLCC-4 SMT LEDs; 表面贴装式LED指示灯， PLCC - 4表面贴装LED
| 型号： | HSMF-A211-A00J1 |
| 厂家： | 
AVAGO TECHNOLOGIES LIMITED |
| 描述： | Surface Mount LED Indicators, PLCC-4 SMT LEDs |
| 文件： | 总16页 (文件大小：298K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HSMx-A2-xx-xxxxx Bi-Color
HSMx-A3xx-xxxxx Tri-Color
Surface Mount LED Indicators,
PLCC-4 SMT LEDs
Data Sheet
Description
Features
• Industry Standard PLCC-4 package (Plastic Leaded
Chip Carrier)
This family of SMT LEDs is packaged in the industry
standard PLCC-4 package. These SMT LEDs have high
reliability performance and are designed to work under
a wide range of environmental conditions. This high
reliability feature makes them ideally suited to be used
under harsh interior automotive as well as interior signs
application conditions.
• High reliability LED package
• High brightness using AlInGaP and InGaN dice tech-
nologies
• Available in full selection of colors
• Super wide viewing angle at 120°
To facilitate easy pick and place assembly, the LEDs are
packed in EIA-compliant tape and reel. Every reel will be
shipped in single intensity and color bin, except red color
to provide close uniformity.
• Available in 8 mm carrier tape on 7-inch reel
• Compatible with IR soldering process
Applications
These LEDs are compatible with IR and TTW solder reflow
process.
• Electronic signs and signals
– Interior full color sign
– Variable message sign
• Interior automotive
This super wide viewing angle at 120° together with
the built in reflector pushing up the intensity of the
light output makes these LED suitable to be used in the
interior electronics signs. The flat top emitting surface
makes it easy for these LEDs to mate with light pipes.
This is suitable for general backlighting in automotive
interior, office equipment, industrial equipment, and
home appliances.
– Instrument cluster backlighting
– Central console backlighting
– Cabin backlighting
• Office automation, home appliances, industrial
equipment
– Front panel backlighting
– Display backlighting
CAUTION: HSMF-Axxx-xxxxx LEDs are Class 2 ESD sensitive. Please observe appropriate precautions
during handling and processing. Refer to Avago Application Note AN-1142 for additional details.
Package Dimensions
ꢁ.8 0.ꢁ
ꢁ.ꢁ 0.ꢁ
ꢂ.9 0.ꢁ
0.ꢂ TYP.
0.8 0.ꢂ
(ꢁ)
(ꢀ)
ꢀ.ꢁ 0.ꢁ
ꢀ.5 0.ꢁ
0.8 0.ꢀ
(ꢂ)
CATHODE MARKING
NOTE:
(4)
0.5 0.ꢂ
0.7 0.ꢂ
1. ALL DIMENSIONS IN mm.
Device Selection Guide
Tri Color
Bi Color
1
2
3
4
Cathode (Color 1)
Common Anode
Cathode (Color 3)
Cathode (Color 2)
Part Number
Color 1
Color 2
HSMF-A201- xxxxx
HSMF-A202- xxxxx
HSMF-A203- xxxxx
HSMF-A204- xxxxx
HSMF-A205- xxxxx
HSMF-A206- xxxxx
HSMF-A211- xxxxx
HSMF-A212- xxxxx
HSMF-A222- xxxxx
HSMF-A227- xxxxx
HSMF-A228- xxxxx
HSMF-A226- xxxxx
GaP Red
GaP Yellow Green
GaP Yellow
GaP Red
Bi Color
GaP Red
GaP Emerald Green
GaP Yellow Green
GaP Emerald Green
GaP Yellow Green
GaP Yellow Green
GaP Yellow
1
2
3
4
Cathode (Color 1)
GaP Orange
GaP Orange
GaP Yellow
AlGaAs Red
AlGaAs Red
AlInGaPRed
AlInGaP Red
AlInGaP Amber
AlInGaP Amber
Anode (Color 1)
Cathode (Color 2)
Anode (Color 2)
AlInGaP Amber
GaN Blue
GaN Blue
AlInGaP Yellow Green
2
Color 1
Color 2
Min. Iv @ 20 mA
Min. Iv @ 20 mA
Bin ID
Typical Iv @ 20 mA
(mcd)
Typical Iv @ 20 mA
(mcd)
Part Number
(mcd)
Bin ID
(mcd)
10.0
6.3
HSMF-A201-A00J1
HSMF-A202-A00J1
HSMF-A203-A00J1
HSMF-A204-A00J1
HSMF-A205-A00J1
HSMF-A206-A00J1
HSMF-A211-A00J1
HSMF-A212-A00J1
HSMF-A222-A00J1
HSMF-A227-A00J1
HSMF-A228-A00J1
HSMF-A226-A00J1
K2
8.0
16.0
16.0
16.0
16.0
16.0
16.0
25.0
25.0
80.0
80.0
80.0
100.0
L1
20.0
12.0
8.0
K2
8.0
K1
J1
K2
8.0
4.0
K2
8.0
L1
10.0
4.0
20.0
8.0
K2
8.0
J1
K2
8.0
L1
10.0
10.0
6.3
20.0
20.0
12.0
80.0
10.0
10.0
60.0
L2
12.5
12.5
40.0
40.0
40.0
49.0
L1
L2
K1
P1
J2
P1
40.0
5.0
P1
P1
J2
5.0
P2
M2
20.0
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.
Tri Color
Part Number
Color 1
Color 2
Color 3
HSMF-A301-xxxxx
HSMF-A331-xxxxx
HSMF-A332-xxxxx
HSMF-A341-xxxxx
HSMF-A342-xxxxx
GaP Red
GaP Yellow
InGaN Green
InGaN Green
InGaN Green
InGaN Green
GreenGaN Blue
GaN Blue
AlInGaP Red
AlInGaP Red Orange
AllnGaP Red
AllnGaP Red Orange
GaN Blue
InGaN Blue
InGaN Blue
Color 1
Color 2
Color 3
Min. Iv
@ 20 mA
Typical Iv
@ 20 mA
(mcd)
Min. Iv
@ 20 mA
Typical Iv
@ 20 mA
(mcd)
Min. Iv
@ 20 mA
Typical Iv
@ 20 mA
(mcd)
Part Number
Bin ID (mcd)
Bin ID (mcd)
Bin ID (mcd)
HSMF-A301-A00J1
HSMF-A331-A00J1
HSMF-A332-A00J1
HSMF-A341-A00J1
HSMF-A342-A00J1
K2
P1
P1
P1
P1
8.0
13.0
80.0
80.0
80.0
80.0
L2
R1
R1
R1
R1
12.5
99.0
99.0
99.0
99.0
20.0
K2
K2
K2
N1
N1
8.0
8.0
10.0
10.0
10.0
40.0
40.0
40.0
40.0
40.0
40.0
160.0
160.0
160.0
160.0
8.0
25.0
25.0
Note:
1. The luminous intensity Iv, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.
ꢀ
Part Numbering System
HSM
x – A x x x – x x x x x
1 2 3 4 5 6 7 8 9
Packaging Option
Color Bin Selection
Intensity Bin Select
Device Specification Configuration
Package Type
LED Chip Color
Absolute Maximum Ratings (T = 25°C)
A
AlInGaP
Parameters
GaP
AlGaAs
30 mA
Red, Amber
Yellow Green
GaN/InGaN
20 mA
[1]
[3,4]
[4]
DC Forward Current
30 mA
100 mA
78 mW
30 mA
20 mA
[2]
Peak Forward Current
Power Dissipation
Reverse Voltage
100 mA
78 mW
100 mA
72 mW
5 V
100 mA
48 mW
100 mA
120 mW
Junction Temperature
Operating Temperature
Storage Temperature
110°C
–55°C to +100°C
–55°C to +100°C
Notes:
1. Derate linearly as shown in figure 4.
2. Duty factor = 10%, Frequency = 1kHz.
3. Drive Current between 10 mA and 30 mA are recommended for best long term performance.
4. Operation at current below 5 mA is not recommended.
4
Optical Characteristics (T = 25°C)
A
Peak
Dominant
Luminous
Luminous Intensity/
Total Flux
Wavelength
(nm)
Wavelength
Viewing Angle
2θ (Degrees)
1/2
Efficacy η
v
[1]
[2]
[3]
λ
λ (nm)
D
(lm/W)
I (mcd) /Φ (mlm)
PEAK
v
v
Color
Typ.
635
645
635
621
600
592
583
592
565
558
523
468
428
575
Typ.
626
637
626
615
602
590
585
590
569
560
525
470
462
571
Typ.
120
120
120
120
120
120
120
120
120
120
120
120
120
120
Typ.
120
63
Typ.
GaP Red
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
0.45
AlGaAs Red
AlInGaP Red
AlInGaP Red Orange
GaP Orange
150
240
380
480
580
480
590
650
500
75
AlInGaP Amber
GaP Yellow
AlInGaP Amber
GaP Yellow Green
GaP Emerald Green
InGaN Green
InGaN Blue
GaN Blue
65
AlInGaP Yellow Green
620
Notes:
1. The dominant wavelength, λ , is derived from the CIE Chromaticity Diagram and represents the color of the device.
D
2. θ is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
1/2
3. Radiant intensity, I in watts/steradian, may be calculated from the equation I = I /η , where I is the luminous intensity in candelas and η is the luminous efficacy in lumens/watt.
e
e
v
v
v
v
Electrical Characteristics (T = 25°C)
A
Forward Voltage
Reverse Voltage
V @ 100 µA
R
Reverse Voltage
V @ 10 µA
R
V (Volts) @ I = 20mA
F
F
Dice Technology
GaP
Typ.
Max.
Min.
Min.
2.2
1.9
1.9
3.9
3.4
2.6
5
5
5
-
-
AS AlGaAs
AlInGaP
2.6
-
2.4
-
GaN Blue
InGaN
4.3
5
5
4.05
-
ꢁ
ꢂ.0
0.9
0.8
0.7
0.6
0.5
0.4
0.ꢀ
YELLOW GREEN
AMBER
BLUE
CYAN
GREEN
ORANGE
RED ORANGE
RED
0.ꢁ
0.ꢂ
0
ꢀ80
4ꢀ0
480
5ꢀ0
580
6ꢀ0
680
7ꢀ0
780
WAVELENGTH – nm
ꢂ.0
0.8
0.6
0.4
0.ꢁ
0
GaP
EMERALD
GREEN
GaP
YELLOW
GREEN
GaP YELLOW
GaP ORANGE
GaP RED
GaN BLUE
ꢀ80
4ꢀ0
480
5ꢀ0
580
6ꢀ0
680
7ꢀ0
780
WAVELENGTH – nm
Figure 1. Relative intensity vs. wavelength.
ꢂ.8
ꢂ.6
ꢂ.4
ꢂ.ꢁ
ꢂ.0
0.8
ꢀ5
ꢀ0
ꢁ5
ꢁ0
ꢂ5
ꢂ0
ꢀ5
ꢀ0
Gap
AlInGaP
AlGaAs
AlGaAs
GaP
ꢁ5
InGaN
GaN
GaP
AS AlInGaP
ꢁ0
InGaN/GaN
AlGaAs
ꢂ5
InGaN
AS AlInGaP
0.6
0.4
0.ꢁ
0
ꢂ0
GaN
BLUE
5
0
5
0
0
5
ꢂ0 ꢂ5 ꢁ0 ꢁ5 ꢀ0 ꢀ5
0
ꢂ
ꢁ
ꢀ
4
5
0
ꢁ0
40
60
80
ꢂ00 ꢂꢁ0
TEMPERATURE – °C
DC FORWARD CURRENT – mA
FORWARD VOLTAGE – V
Figure 2. Forward current vs. forward voltage.
Figure 3. Relative intensity vs. forward voltage.
Figure 4a. Maximum forward current vs. ambient
temperature. Derated based on T MAX = 110°C,
JA
J
Rθ = 500°C/W (1 chip on).
540
5ꢀ0
ꢀ5
ꢀ0
ꢁ5
ꢁ0
ꢂ5
ꢂ0
AlGaAs
InGaN GREEN
GaP
5ꢁ0
5ꢂ0
500
490
480
470
460
AS AlInGaP
InGaN/GaN
InGaN BLUE
5
0
0
5
ꢂ0 ꢂ5 ꢁ0 ꢁ5 ꢀ0 ꢀ5
CURRENT – mA
0
ꢁ0
40
60
80
ꢂ00 ꢂꢁ0
AMBIENT TEMPERATURE – °C
Figure 4b. Maximum forward current vs. ambient
Figure 5. Dominant wavelength vs. forward current
– InGaN.
temperature. Derated based on T MAX = 110°C,
J
Rθ = 700°C/W (3 chip on).
JA
ꢂ.0
0.8
0.6
0.4
0.ꢁ
0
-90 -80 -70 -60 -50 -40 -ꢀ0 -ꢁ0 -ꢂ0
0
ꢂ0 ꢁ0 ꢀ0 40 50 60 70 80 90
ANGULAR DISPLACEMENT – DEGREES
Figure 6. Radiation pattern.
0.9
0.8
0.7
0.6
0.5
0.4
0.ꢀ
HSMF-Aꢀ4ꢂ
HSMF-Aꢀ4ꢁ
HSMF-Aꢀꢀꢂ
HSMF-Aꢀꢀꢁ
HSMF-Aꢀ0ꢂ
CIE CHART ꢂ9ꢀꢂ
BLACK BODY CURVE
0.ꢁ
0.ꢂ
0
0
0.ꢂ 0.ꢁ 0.ꢀ 0.4 0.5 0.6 0.7 0.8 0.9
X-COORDINATE
Figure 7. Chromaticity diagram for Tricolor.
10 to 20 SEC.
+5 °C
-0 °C
255 °C
20 SEC. MAX.
240°C MAX.
3°C/SEC. MAX.
100-150°C
217 °C
3 °C/SEC. MAX.
6 °C/SEC. MAX.
125 °C ± 25 °C
183°C
–6°C/SEC.
MAX.
3°C/SEC.
MAX.
MAX. 120 SEC.
60 to 150 SEC.
120 SEC. MAX.
60-150 SEC.
TIME
TIME
* THE TIME FROM 25 °C TO PEAK TEMPERATURE = 6 MINUTES MAX.
Figure 8a. Recommended SnPb reflow soldering profile.
Figure 8b. Recommended Pb-free reflow soldering profile.
Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT
LED Indicator Components.
ꢁ.60
ꢀ.ꢀ0
ꢀ.ꢀ0
0.40
ꢂ.ꢂ0
0.50
4.50
7.50
ꢂ.50
SOLDER RESIST
Figure 9. Recommended soldering pad pattern.
TRAILER
COMPONENT
LEADER
ꢁ00 mm MIN. FOR ∅ꢂ80 REEL.
ꢁ00 mm MIN. FOR ∅ꢀꢀ0 REEL.
480 mm MIN. FOR ∅ꢂ80 REEL.
960 mm MIN. FOR ∅ꢀꢀ0 REEL.
C
A
USER FEED DIRECTION
Figure 10. Tape leader and trailer dimension.
4
0.ꢂ
4
0.ꢂ
ꢁ
0.05
ꢁ.ꢁ9 0.ꢂ
ꢂ.75 0.ꢂ
ꢀ.5 0.05
+0.ꢂ
–0
∅ꢂ.5
C
ꢀ.8ꢂ 0.ꢂ
+0.ꢀ
–0.ꢂ
8
A
+0.ꢂ
–0
ꢀ.05 0.ꢂ
∅ꢂ
8°
0.ꢁꢁ9 0.0ꢂ
Figure 11. Tape leader and trailer dimension.
Ø 20.5 ± 0.3
+0.5
2
–0
+0
–2.5
62.5
180
Ø 13 ± 0.2
+1.50
–0.00
8.4
(MEASURED AT OUTER EDGE)
14.4 (MAX. MEASURED AT HUB)
LABEL AREA (111 mm x 57 mm)
WITH DEPRESSION (0.25 mm)
7.9 (MIN.)
10.9 (MAX.)
Figure 12. Reel dimension.
ꢂ
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 13. Reeling Orientation.
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture
sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note ANꢁꢀ0ꢁ
Handling of Moisture Sensitive Surface Mount Devices for details.
A. Storage before use
-
Unopen moisture barrier bag (MBB) can be stored at <40°C/ꢂ0%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the
original MSL rating.
-
It is not recommended to open the MBB prior to assembly (e.g. for IQC).
B. Control after opening the MBB
-
-
The humidity indicator card (HIC) shall be read immediately upon opening of MBB.
The LEDs must be kept at <ꢀ0°C / 60%RH at all time and all high temperature related process including soldering,
curing or rework need to be completed within 672 hours.
C. Control for unfinished reel
For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <ꢁ%RH.
D. Control of assembled boards
-
-
If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be
stored in sealed MBB with desiccant or desiccator at <ꢁ%RH to ensure no LEDs have exceeded their floor life of
672 hours.
E. Baking is required if:
-
-
-
“10%”or “1ꢁ%”HIC indicator turns pink.
The LEDs are exposed to condition of >ꢀ0°C / 60% RH at any time.
The LEDs floor life exceeded 672 hours.
Recommended baking condition: 60 ꢁ°C for 20 hours.
10
Iv Bin Select (X X )
Individual reel will contain parts
from 1 half bin only.
5 6
For
For
HSMF-A202-xxxxx
HSMF-A203-xxxxx
HSMF-A205-xxxxx
Minimum Intensity Bin
X
Min. Iv Bin Selection
Minimum Intensity Bin
5
Color 1
(Red)
Color 2
(Yellow)
For
Color 1
(Red/Orange)
Color 2
(Green)
HSMF-A201-xxxxx
HSMF-A204-xxxxx
HSMF-A206-xxxxx
A
B
C
K2
K2
K2
K2
K2
L1
K1
K2
L1
A
B
C
K2
K2
K2
K2
K2
L1
J1
J2
Minimum Intensity Bin
K1
K2
L1
J1
D
E
L2
Color 1
(Red/Yellow/
Orange)
D
E
M1
K1
K2
L1
Color 2
(Green)
F
A
B
C
K2
K2
K2
K2
K2
L1
L1
F
G
H
J
L1
L2
G
H
J
L1
J2
L1
M1
M2
N1
L1
L1
K1
K2
L1
J1
L1
L2
D
E
L1
K
L
L1
M1
K1
K2
L1
K
L
L1
L2
F
L2
M
N
P
Q
R
S
L2
G
H
J
L1
L2
M
N
P
Q
R
S
L2
J2
L2
L1
M1
M2
N1
L1
L2
K1
K2
L1
J1
L2
L2
L1
L2
L2
M1
K1
K2
L1
K
L
L1
L2
M1
M1
M1
M1
M1
M2
M2
M2
M2
M2
L2
M1
M1
M1
M1
M1
M2
M2
M2
M2
M2
M
N
P
Q
R
S
L2
L2
J2
T
L2
M1
M2
N1
L1
T
K1
K2
L1
J1
U
V
W
X
Y
Z
L2
L2
U
V
W
X
Y
Z
M1
K1
K2
L1
L2
M1
M1
M1
M1
M1
M2
M2
M2
M2
M2
L2
J2
T
M1
M2
N1
L1
K1
K2
L1
L2
U
V
W
X
Y
Z
1
M1
1
L2
M1
M2
N1
1
For
For
For
HSMF-A211-xxxxx
HSMF-A212-xxxxx
HSMF-A222-xxxxx
Minimum Intensity Bin
Minimum Intensity Bin
Minimum Intensity Bin
Color 1
(Red)
Color 2
(Green)
Color 1
(Red)
Color 2
(Yellow)
Color 1
(Red)
Color 2
(Amber)
A
B
C
L2
L1
A
B
C
L2
K1
K2
L1
A
B
C
D
E
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
Q1
Q1
Q1
Q1
Q1
Q2
Q2
Q2
Q2
Q2
R1
R1
R1
R1
R1
R2
R2
R2
R2
R2
P1
P2
Q1
Q2
R1
P1
P2
Q1
Q2
R1
P1
P2
Q1
Q2
R1
P1
P2
Q1
Q2
R1
P1
P2
Q1
Q2
R1
P1
P2
Q1
Q2
R1
L2
L2
L2
L2
M1
M2
N1
L1
L2
D
E
L2
D
E
L2
L2
L2
L2
M1
K1
K2
L1
F
M1
M1
M1
M1
M1
M2
M2
M2
M2
M2
N1
N1
N1
N1
N1
N2
N2
N2
N2
N2
F
M1
M1
M1
M1
M1
M2
M2
M2
M2
M2
N1
N1
N1
N1
N1
N2
N2
N2
N2
N2
F
G
H
J
L2
G
H
J
G
H
J
M1
M2
N1
L1
L2
K
L
K
L
M1
K1
K2
L1
K
L
M
N
P
Q
R
S
L2
M
N
P
Q
R
S
M
N
P
Q
R
S
M1
M2
N1
L1
L2
M1
K1
K2
L1
L2
T
M1
M2
N1
L1
T
T
U
V
W
X
Y
Z
U
V
W
X
Y
Z
L2
U
V
W
X
Y
Z
M1
K1
K2
L1
L2
M1
M2
N1
L2
1
1
M1
1
2
3
4
5
6
Note: 0 represents no maximum bin limit.
For
For
For
HSMF-A227-xxxxx
HSMF-A228-xxxxx
HSMF-A331-xxxxx
HSMF-A332-xxxxx
HSMF-A341-xxxxx
HSMF-A342-xxxxx
Minimum Intensity Bin
Minimum Intensity Bin
Minimum Intensity Bin
Color 1
(Red/Amber)
Color 2
(Blue)
Color 1
(Red/Red
Orange)
Color 1
(Red/Red
Orange)
Color 2
(Green)
Color 3
(Blue)
Color 2
(Green)
Color 3
(Blue)
A
B
C
D
E
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
Q1
Q1
Q1
Q1
Q1
Q2
Q2
Q2
Q2
Q2
R1
R1
R1
R1
R1
R2
R2
R2
R2
R2
J2
A
B
C
D
E
P1
P1
P1
P1
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
P2
P2
P2
P2
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q2
Q2
Q2
Q2
Q2
Q2
R1
R1
R1
R2
R2
R2
S1
S1
S1
R1
R1
R1
R2
R2
R2
S1
S1
S1
R1
R1
R1
R2
R2
R2
S1
S1
S1
R1
R1
R1
R2
R2
R2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
K2
L1
L2
A
B
C
D
E
P1
P1
P1
P1
P1
P1
P1
P1
P1
P2
P2
P2
P2
P2
P2
P2
P2
P2
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q1
Q2
Q2
Q2
Q2
Q2
Q2
R1
R1
R1
R2
R2
R2
S1
S1
S1
R1
R1
R1
R2
R2
R2
S1
S1
S1
R1
R1
R1
R2
R2
R2
S1
S1
S1
R1
R1
R1
R2
R2
R2
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
N1
N2
P1
K1
K2
L1
L2
J2
F
F
F
G
H
J
K1
K2
L1
L2
J2
G
H
J
G
H
J
K
L
K
L
K
L
M
N
P
Q
R
S
K1
K2
L1
L2
J2
M
N
P
Q
R
S
M
N
P
Q
R
S
K1
K2
L1
L2
J2
T
T
T
U
V
W
X
Y
Z
U
V
W
X
Y
Z
U
V
W
X
Y
Z
K1
K2
L1
L2
J2
1
2
3
4
5
6
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
K1
K2
L1
L2
X
Number of Half bins from X
For HSMF-A3xx-xxxxx
Color 1
Intensity Bin Limits
6
5
For
HSMF-A2xx-xxxxx
Color 1
Bin ID
J1
Min. (mcd)
Max. (mcd)
5.60
(Red/Red
Orange)
Color 2
(Green)
Color 3
(Blue)
4.50
Color 2
J2
5.60
7.20
0
A
B
C
0
5
5
5
5
5
5
5
5
5
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
0
5
5
5
4
4
4
3
3
3
5
5
5
4
4
4
3
3
3
5
5
5
4
4
4
3
3
3
0
5
4
3
5
4
3
5
4
3
5
4
3
5
4
3
5
4
3
5
4
3
5
4
3
5
4
3
0
A
B
C
0
0
5
4
3
2
0
5
4
3
2
0
5
4
3
2
0
5
4
3
2
0
5
4
3
2
K1
K2
L1
7.20
9.00
0
0
0
0
5
5
5
5
5
4
4
4
4
4
3
3
3
3
3
2
2
2
2
2
9.00
11.20
11.20
14.00
18.00
22.40
28.50
35.50
45.00
56.00
71.50
90.00
112.50
140.00
180.00
224.00
285.00
355.00
450.00
560.00
715.00
900.00
14.00
L2
18.00
D
E
D
E
M1
M2
N1
N2
P1
P2
Q1
Q2
R1
R2
S1
22.40
28.50
F
F
35.50
G
H
J
G
H
J
45.00
56.00
71.50
K
L
K
L
90.00
112.50
140.00
180.00
224.00
285.00
355.00
450.00
560.00
715.00
900.00
1125.00
M
N
P
Q
R
S
M
N
P
Q
R
S
S2
T1
T2
T
T
U1
U2
V1
V2
U
V
W
X
Y
Z
U
V
W
X
Y
Z
Tolerance of each bin limit = 12%.
1
2
3
Note: 0 represents no maximum bin limit.
Note: 0 represents no maximum bin limit.
Color Bin Select (X )
7
For
For
HSMF-A204-xxxxx
HSMF-A206-xxxxx
HSMF-A205-xxxxx
HSMF-A228-xxxxx
Individual reel will contain parts
from 1 full bin only.
Color 1
Color 1
Color 2
X
Color Bin Combinations
7
(Yellow/
Amber/
Orange)
(Yellow/Amber/
Orange)
(Emerald
Green/Blue)
For
Color 2
(Yellow Green)
HSMF-A202-xxxxx
HSMF-A203-xxxxx
HSMF-A212-xxxxx
HSMF-A222-xxxxx
HSMF-A227-xxxxx
0
A
B
C
D
E
0
0
0
A
B
C
0
0
ABC
BCD
CDE
ABC
BCD
CDE
ABC
BCD
CDE
DEF
DEF
DEF
AB
BC
ABC
ABC
ABC
BCD
BCD
BCD
CDE
CDE
CDE
ABC
BCD
CDE
AB
ABC
BCD
CDE
DEF
ABC
BCD
CDE
DEF
AB
BC
EFG
EFG
EFG
EFG
FGH
FGH
FGH
FGH
EF
Color 2
(Emerald Green/
Yellow/Blue)
Color 1
(Red)
D
E
0
A
B
C
D
E
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
F
F
ABC
ABCD
ABCDE
BCD
BCDE
BCDEF
CDE
DEF
CDEF
AB
G
H
J
G
H
J
K
L
K
L
EF
CD
EF
F
M
N
P
Q
R
S
M
N
P
Q
R
S
DE
EF
G
H
J
EF
EF
AB
AB
BC
FG
CD
AB
FG
K
L
DE
AB
CD
FG
BC
AB
BC
BC
DE
FG
M
N
P
CD
T
BC
T
EF
FG
DE
U
V
W
X
Y
Z
CD
BC
U
V
W
X
Y
AB
BC
GH
GH
GH
GH
GH
EF
DE
BC
Note: 0 represents full distribution.
AB
BC
CD
CD
CD
DE
CD
CD
EF
DE
CD
For
Note: 0 represents full distribution.
1
2
3
4
5
6
7
AB
BC
DE
HSMF-A201-xxxxx
HSMF-A211-xxxxx
DE
Color 1
(Red)
Color 2
(Yellow Green)
CD
DE
DE
DE
0
A
B
C
D
E
0
0
0
0
0
0
0
EF
AB
EFG
FGH
EF
EF
BC
EF
CD
Note: 0 represents full distribution.
FG
GH
Note: 0 represents full distribution.
For
HSMF-A3xx-xxxxx
Color Bin Limits
Amber/
Yellow
Color 1
Color 2
0
Color 3
0
Blue
Min. (nm) Max. (nm)
Min. (nm) Max. (nm)
0
A
B
C
D
E
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
A
B
C
460.0
465.0
470.0
475.0
465.0
470.0
475.0
480.0
A
B
C
D
E
582.0
584.5
587.0
589.5
592.0
594.5
584.5
587.0
589.5
592.0
594.5
597.0
0
ABC
BCD
AB
0
0
D
0
BC
Green
Min. (nm) Max. (nm)
0
CD
F
A
B
C
515.0
520.0
525.0
530.0
520.0
525.0
530.0
535.0
F
ABC
ABC
ABC
ABC
ABC
ABC
BCD
BCD
BCD
BCD
BCD
BCD
AB
AB
AB
AB
AB
BC
0
G
H
J
ABC
BCD
AB
Orange
Min. (nm) Max. (nm)
D
A
B
C
D
E
597.0
600.0
603.0
606.0
609.0
600.0
603.0
606.0
609.0
612.0
K
L
BC
CD
Emerald
Green
Min. (nm) Max. (nm)
M
N
P
Q
R
S
0
A
B
C
552.5
555.5
558.5
561.5
555.5
558.5
561.5
564.5
ABC
BCD
AB
Red Orange Min. (nm) Max. (nm)
D
BC
A
B
611.0
616.0
616.0
620.0
CD
T
ABC
BCD
AB
Yellow
Green
Min. (nm) Max. (nm)
U
V
W
X
Y
Z
Red
Min. (nm) Max. (nm)
E
564.5
567.5
570.5
573.5
567.5
570.5
573.5
576.5
Full Distribution
F
BC
G
H
Tolerance of each bin limit = 1 nm.
CD
ABC
BCD
AB
BC
1
2
3
4
5
6
7
8
BC
BC
BC
Packaging Option (X X )
X X
8
8 9
BC
CD
9
CD
ABC
BCD
AB
J1
20 mA test current, Top Mount, 7 inch Reel
CD
CD
CD
BC
CD
CD
Note: 0 represents full distribution.
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes 5989-1210EN
AV02-0501EN - June 13, 2007
相关型号：
©2020 ICPDF网 联系我们和版权申明