SFH757E9386 [AVAGO]

FIBER OPTIC TRANSMITTER, 100Mbps, THROUGH HOLE MOUNT, PLASTIC PACKAGE-2;
SFH757E9386
型号: SFH757E9386
厂家: AVAGO TECHNOLOGIES LIMITED    AVAGO TECHNOLOGIES LIMITED
描述:

FIBER OPTIC TRANSMITTER, 100Mbps, THROUGH HOLE MOUNT, PLASTIC PACKAGE-2

光纤
文件: 总5页 (文件大小:262K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
SFH757 E9386  
Plastic Fiber Optic Transmitter Diode  
Plastic Connector Housing  
Data Sheet  
Description  
Features  
The SFH757 is a low-cost transmitter for simple optical  
data transmission with polymer optical fiber. This very  
robust 650nm LED can be used for speeds up to 100MBd.  
High speed transmitter  
2.2 mm aperture holds standard 1000 micron plastic  
fiber  
The transparent plastic package has an aperture where  
the the 2.2mm fiber-end can be inserted and fixed with  
glue. This easy coupling method is extremely cost-  
effective.  
No fiber stripping required  
Molded microlens for efficient coupling  
Applications  
Household electronics  
Power electronics  
Optical networks  
Light barriers  
Ordering Information  
Type  
Ordering Code  
SFH757 E9386  
SP000234857  
Technical Data  
Absolute Maximum Ratings  
Limit Values  
min.  
Parameter  
Symbol  
max.  
+85  
+100  
100  
260  
3
Unit  
°C  
Operating Temperature Range  
Storage Temperature Range  
Junction Temperature  
T
OP  
–40  
T
STG  
–40  
°C  
T
J
°C  
Soldering Temperature(2 mm from case bottom, t 5 s)  
Reverse Voltage  
T
S
°C  
V
V
R
Forward Current  
I
I
50  
mA  
A
F
Surge Current (t 10 μs, D = 0)  
Power Dissipation  
1
FSM  
P
R
120  
450  
200  
mW  
K/W  
tot  
Thermal Resistance, Junction/Air  
thJA  
Maximum temperature cycling without electrical operation, temperature range -55 to 100°C n_cyc  
Characteristics (T = 25°C)  
A
Parameter  
Symbol  
Typical Value  
Unit  
Peak Wavelength  
λ
650  
25  
nm  
nm  
ns  
Peak  
Spectral Bandwidth (FWHM)  
Δλ  
Switching Times (R = 50 Ω, I = 30mA)  
L
F
20% ...80%  
80% ...20%  
t
R
t
F
25  
25  
Capacitance (f = 1 MHz, V = 0 V)  
C
30  
pF  
V
R
O
Forward Voltage (I = 10 mA)  
V
1.9  
1.7  
F
F
[1]  
Output Power Coupled into Plastic Fiber(I = 10 mA)  
Φ
150 (100)  
–0.4  
–3  
μW  
%/K  
F
IN  
Φ
V
Temperature Coefficient Φ  
TC  
TC  
TC  
IN  
Temperature Coefficient V  
mV/K  
nm/K  
F
Temperature Coefficient λ  
0.2  
Peak  
λ
Notes:  
1. The output power coupled into plastic fiber is measured with a large area detector at the end of a short length of fiber (about 30 cm). Enhanced  
losses of a POF on the first meters due to leaky modes have to be taken into account when calculating the power budget for a long POF.  
2
Figure 1. Relative Spectral Emission Irel = f(λ)  
Figure 2. Forward Current IF = f(VF) single pulse, duration = 20 μs  
Figure 3. Relative Output Power Ie/Ie(50 mA) = f(IF) single pulse,  
Figure 4. Maximum Permissible Forward Current, IF = f(TA), RthJA = 450 K/W  
duration = 20 μs  
3
Figure 5. Permissible Pulse Handling Capability, IF = f(tP),  
duty cycle D = parameter, TA = 25°C  
Package Outlines  
Dimensions in mm  
Figure 6. SFH757  
4
Disclaimer  
The information herein is given to describe certain components and shall not be considered as a guarantee of  
characteristics.  
Terms of delivery and rights to technical change reserved.We hereby disclaim any and all warranties, including but  
not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein.  
Warnings  
Due to technical requirements components may contain dangerous substances. For information on the types in-  
question please contact your nearest Avago Technologies Office.  
Avago Technologies Components may only be used in life-support devices or systems with the express written  
approval of Avago Technologies, if a failure of such components can reasonably be expected to cause the failure  
of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support  
devices or systems are intended to be implanted in the human body, or to support and/or maintain and sus-  
tainand/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons  
maybe endangered.  
Information  
For further information on technology, delivery terms and conditions and prices please contact your nearest  
Avago Technologies Office (www.avagotech.com).  
For product information and a complete list of distributors, please go to our web site: www.avagotech.com  
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.  
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved.  
AV01-0716EN - June 30, 2007  

相关型号:

SFH757V

Plastic Fiber Optic Transmitter Diode Plastic Connector Housing
INFINEON

SFH757V

Transmitter for Polymer Optical Fiber Applications
AVAGO

SFH757_11

Transmitter for Polymer Optical Fiber Applications
AVAGO

SFH7710

SMD Kippsensor mit digitalem Ausgang (SFH 7710) SMD Orientation-Sensor with digital output (SFH 7710) Lead (Pb) Free Product - RoHS Compliant
OSRAM

SFH7740

Reflexlichtschranke Reflective Optical Switch
OSRAM

SFH7741

Proximity Sensor
OSRAM

SFH7743

Digitaler Näherungsdetektor mit integriertem Sender Treiber
OSRAM

SFH7770

Not for design in automotive and industrial applications
OSRAM

SFH7770E6

Ambient Light and Proximity Sensor
OSRAM

SFH7771

Ambient Light and Proximity Sensor
OSRAM

SFH7773

(IR-LED Proximity Sensor Ambient Light Sensor)
OSRAM

SFH7776

Ambient Light and Proximity Sensor with Integrated 850nm IR Emitter
OSRAM