AZ733WC-2CA-9D [AZETTLER]
Electromechanical Relay, DPDT, Latched, 15.5VDC (Coil), 10A (Contact), 150VDC (Contact), Random, AC/DC Output;
| 型号： | AZ733WC-2CA-9D |
| 厂家： | 
AMERICAN ZETTLER, INC. |
| 描述： | Electromechanical Relay, DPDT, Latched, 15.5VDC (Coil), 10A (Contact), 150VDC (Contact), Random, AC/DC Output PC 光电二极管 继电器 |
| 文件： | 总2页 (文件大小：162K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AZ733WC
DPDT MINIATURE
POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• 1.5 mm contact gap
• Epoxy sealed version available
• Isolation spacing greater than 8 mm
• UL Class B insulation system, class F available
• UL, CUR file E44211
• TÜV file R50311225
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 105
1 x 105 at 10 A 240 VAC Res.
Arrangement DPDT (2 Form C)
Ratings
Resistive load:
Max. switched power: 240 W or 2500 VA
Max. switched current: 10 A
Operate Time (typical) 10 ms at nominal coil voltage
7 ms at 1.5 x nominal coil voltage
Max. switched voltage: 150 VDC* or 400 VAC
4.5 ms at 2.0 x nominal coil voltage
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Release Time (typical) 4 ms at nominal coil voltage
(with no coil suppression)
Rated Load
UL, CUR
Dielectric Strength
(at sea level for 1 min.) 3000 Vrms between open contacts
5000 Vrms contact to coil
Silver Cadmium oxide contacts:
3000 Vrms between contact sets
TV-3, 125 VAC, 25K cycles, NO Side Only
10A, 250 VAC, 100K cycles, General Use
10A, 30 VDC, 50K cycles NO/NC contacts, Res
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Silver Tin oxide contacts:
Dropout
Greater than 10% of nominal coil voltage
12 A, 277 VAC / 250 VAC, Resistive, 70°C, 8K cycles
1/3 HP 125 VAC, 40°C, 1K cycles
Ambient Temperature at nominal coil voltage
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
3/4 HP 250 VAC, 40°C, 1K cycles
10 A at 30 VDC, 250 VAC resistive
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
10 g
TÜV
Vibration
Material
Silver cadmium oxide; Silver Tin oxide;
Gold Plate optional
Shock
Resistance
< 50 milliohms initially
(24 V, 1 A voltage drop method)
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
COIL
Max. Immersion Time 30 seconds
Power
Weight
18 grams
At Pickup Voltage
(typical)
.8 mW
NOTES
Max. Continuous
Dissipation
2.3 W at 20°C (68°F) ambient
1.9 W at 40°C (104°F) ambient
1. All values at 20°C (68°F).
Temperature Rise
Temperature
51°C (65°F) at nominal coil voltage
Max. 130°C (266°F)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
5/20/15
AZ733WC
RELAY ORDERING DATA
COIL SPECIFICATIONS
ORDER NUMBER
Nominal Coil
VDC
Must Operate*
VDC
Max. Continuous
VDC
Coil
Resistance
Unsealed
Sealed
3
3
5.0
11.3 10%
AZ733WC–2C–3D
AZ733WC–2C–3DE
5
5
6
8.4
10.1
15.5
20.3
31.2
40.6
79.1
102.0
31 10%
45 10%
AZ733WC–2C–5D
AZ733WC–2C–6D
AZ733WC–2C–9D
AZ733WC–2C–12D
AZ733WC–2C–18D
AZ733WC–2C–24D
AZ733WC–2C–48D
AZ733WC–2C–60D
AZ733WC–2C–5DE
AZ733WC–2C–6DE
AZ733WC–2C–9DE
AZ733WC–2C–12DE
AZ733WC–2C–18DE
AZ733WC–2C–24DE
AZ733WC–2C–48DE
AZ733WC–2C–60DE
6
9
9
101 10%
180 10%
405 10%
720 15%
2,880 15%
4,500 15%
12
18
24
48
60
12
18
24
48
60
*Due to the special construction of this relay, the “Must Operate” voltage is the same as the “Nominal Coil” voltage. It is recommended that the relay be
energized with at least 1.5 X coil nominal and then return the operating voltage to coil nominal; Add 'E' after 2C for Silver Tin Oxide contacts; add 'A'
suffix for gold plate; add 'F' suffix for class F.
MECHANICAL DATA
PC BOARD LAYOUT
1.14
(29)
.51
(13)
.197.197
(5) (5)
.590
(15)
.295 (7.5)
Terminal No. Dimensions Tol.: 0.005 (0.13)
1,2,4,5,7,8 0.018 (0.457) x 0.038 (0.965)
.08
(2.1)
3,6
0.011 (0.279) x 0.038 (0.965)
.05 DIA. (1.3)
WIRING DIAGRAM
Form C
1
2
3
4
8
7
6
5
Viewed toward terminals
Viewed toward terminals
Dimensions in inches with metric equivalents in parentheses. Tolerance:
.010"
5/20/15
相关型号：
©2020 ICPDF网 联系我们和版权申明