AZ762P1-1AE-12DELR [AZETTLER]
Power/Signal Relay;
| 型号： | AZ762P1-1AE-12DELR |
| 厂家： | 
AMERICAN ZETTLER, INC. |
| 描述： | Power/Signal Relay |
| 文件： | 总3页 (文件大小：865K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AZ762P
20 A SPDT MINIATURE
POWER RELAY
FEATURES
• Latching relay
• Dielectric strength 4400 Vrms
• Epoxy sealed versions available
• 20 Amp switching
• High inrush current 500A / 2ms available
• UL, CUR le E44211
CONTACTS
Arrangement
SPDT (1 Form C)
SPST (1 Form A, 1 Form B)
GENERAL DATA
Ratings
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 10 6
Max. switched power: 5000 VA
Max. switched current: 20 A
Max. switched voltage: 277 VAC
1 x 10 5 at 16 A 250 VAC Res.
Set Time (typical)
15 ms at nominal coil voltage
Rated Load
20 A at 250 VAC, Resistive, 20k cycles
16 A at 250 VAC, Resistive, 100k cycles
16 A at 250 VAC, Resistive, 50k cycles (Form C-NC)
6 A at 277 VAC, inductive, 100k cycles
1.5 HP at 250 VAC, Motor, 40k cycles
Reset Time (typical)
15 ms at nominal coil voltage
(with no coil suppression)
Min. Pulse Time
Max Pulse Time
75ms
1 min.
‘T’ High Inrush Version (Form A 5.0mm Only)
3300W at 277VAC, Electronic Ballast, 20k cycles
3000W at 220VAC, Tungsten, 6k cycles
Dielectric Strength
(at sea level for 1 min.)
4400 VAC coil to contact
1000 VAC between open contacts
1500W at 347VAC, Std. Ballast, 20k cycles
Surge Voltage
Coil to Contact
10,000V (at 1.2x50 µ s)
Material
Silver tin oxide, Tungsten/Silver tin oxide
< 50 milliohms initially (at 1A, 24 VDC)
Insulation
Resistance
1000 megohms min. at 20°C
500 VDC 50% RH
Resistance
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
0°C (32°F) to 40°C (104°F)
Storage
COIL
Vibration
0.062" DA at 10–55 Hz
10 g
Power
At Pickup Voltage
(typical)
1 Coil: 256 mW
2 Coils: 384 mW
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Max. Continuous
Dissipation
1 Coil: 0.4 W
2 Coils: 0.6 W
Terminals
Temperature Rise
Max. Temperature
26°C (47°F) at nominal coil voltage
130°C (266°F)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Weight
80°C (176°F)
13 g
NOTES
1. All values at 23°C (73.4°F).
2. Relay may pull in with less than “Must Operate” value.
3. Speci cations subject to change without notice.
4. Check the relay set/reset state before energizing the relay in
application.
10/17/14
AZ762P
RELAY ORDERING DATA
COIL SPECIFICATIONS - SINGLE COIL LATCHING
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil
Unsealed
Sealed
Resistance 1ꢀ0
3
2.4
3.9
22.5
62.5
90
AZ762P1–1CE–3D
AZ762P1–1CE–5D
AZ762P1–1CE–6D
AZ762P1–1CE–12D
AZ762P1–1CE–24D
AZ762P1–1CE–3DE
AZ762P1–1CE–5DE
AZ762P1–1CE–6DE
AZ762P1–1CE–12DE
AZ762P1–1CE–24DE
5
4.0
6.5
6
4.8
7.8
12
24
9.6
15.6
31.2
360
19.2
1,440
COIL SPECIFICATIONS - DUAL COIL LATCHING
ORDER NUMBER*
Nominal Coil
Must Operate
Max. Continuous
Coil 1
Coil 2
Unsealed
Sealed
VDC
3
5
VDC
2.4
4.0
VDC
3.9
6.5
Resistance 1ꢀ0
Resistance 1ꢀ0
15
42
60
15
42
60
AZ762P2–1CE–3D
AZ762P2–1CE–5D
AZ762P2–1CE–6D
AZ762P2–1CE–3DE
AZ762P2–1CE–5DE
AZ762P2–1CE–6DE
6
4.8
7.8
12
24
9.6
19.2
15.6
31.2
240
886
240
886
AZ762P2–1CE–12D AZ762P2–1CE–12DE
AZ762P2–1CE–24D AZ762P2–1CE–24DE
* Substitute “1A” or “1B” in place of “1C” for Form A or B respectively. Form A relay is in the reset postion. Form B relay is in the set position. Add suffix “K” for
3.5mm pin spacing version. Replace ‘1AE’ with ‘1AT’ for W+AgSnO2 high inrush contacts (Form A, 5.0mm pin spacing only). Add suffix “L” for 2.5mm pin
spacing version. Note, Form C only available in 5.0mm and 3.5mm pin spacing. Add suffix “R” for reversed polarity coil.
WIRING DIAGRAM
10/17/14
AZ762P
MECHANICAL DATA
PCB LAYOUT
5.ꢀmm Spacing - Standard
No terminal on
1 Form A
No terminal for
single coil version
3.5mm Spacing - Suffix “K”
No terminal on
1 Form A
No terminal for
single coil version
2.5mm Spacing - Suffix “L”
No terminal for
single coil version
Dimensions in inches with metric equivalents in parentheses. Tolerance:
.010ꢀ
10/17/14
相关型号：
©2020 ICPDF网 联系我们和版权申明