AZ770-1A-6DET [AZETTLER]
Power/Signal Relay;
| 型号： | AZ770-1A-6DET |
| 厂家： | 
AMERICAN ZETTLER, INC. |
| 描述： | Power/Signal Relay 继电器 |
| 文件： | 总3页 (文件大小：1985K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AZ770
SPDT SUBMINIATURE
POWER RELAY
FEATURES
• 5 kV dielectric strength, 10 kV surge
• 8 mm creepage and clearance
• Proof tracking index (PTI/CTI) 250
• 5 Amp switching capability (version “T” 10 Amp)
• 20 A high inrush current (1 Form A)
• Epoxy sealed version available
• UL Class F insulation (155°C) standard
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1),
1 Form A: EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE certificate 40006815
GENERAL DATA
CONTACTS
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Life Expectancy
Mechanical
Minimum operations
1 x 106
Ratings
Resistive load:
Standard version
Electrical
1 x 105 at 5 A 250 VAC Res.
Max. switched power: 150 W or 1250 VA
(Version “T”: 150 W or 2500 VA)
Max. switched current: 5 A
(Version “T”: 10 A)
Max. switched voltage: 30 VDC* or 250 VAC
High capacity version “T”
Electrical
1 x 105 at 10 A 250 VAC Res.
8 ms at nominal coil voltage
Operate Time (max.)
Release Time (max.)
4 ms at nominal coil voltage
(with no coil suppression)
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1000 Vrms between open contacts
Rated Load
UL
B300 pilot duty, 40°C
1000 W, 250 VAC, tungsten load, 40°C 6k cycles
Surge Voltage
Coil to contact
10,000 V (at 1.2x50 µs)
1 Form A
Insulation
Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
5 A at 250 VAC, resistive, 100k cycles
5 A at 30 VDC, resistive, 100k cycles
3 A at 250 VAC, cos phi 0.4, 100k cycles
1/8 HP at 125/250 VAC, 100k cycles
C300 pilot duty, 125/250 VAC, 100k cycles
TV-2 at 120 VAC
Insulation
C250
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution dregree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 5% of nominal coil voltage
1 Form C
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 105°C (221°F)
3 A at 250 VAC, resistive, 100k cycles
3 A at 30 VDC, resistive, 100k cycles
Storage
High capacity version “T”
10 A at 250 VAC, resistive, 85°C, 100k cycles
15 A at 120 VAC, resistive, 70°C, 6k cycles
Vibration
1.65 mm DA at 10–55 Hz
10 g operating, 100 g damage
P.B.T. polyester
Shock
Enclosure
VDE
5 A at 250 VAC, 85°C, 100k cycles
2 A at 250 VAC, cos phi 0.5, 85°C, 30k cycles *
3 A at 400 VAC, 85°C, 100k cycles
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
* change-over contact tested as make contact
5 seconds
80°C (176°F)
High capacity version “T”
10 A at 250 VAC, 85°C, 15k cycles
30 seconds
Material
Silver nickel, silver tin oxide (high capacity
version “T” only), gold plating available
4.6 grams
Packing unit in pcs
100 per tray / 1000 per carton box
Resistance
< 100 milliohms initially
9-2-11
AZ770
COIL
NOTES
Power
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. The vibration resistance is 0.6 mm DA at 10–55 Hz for the
N.C. contact, if vibration is in length direction.
At Pickup Voltage
(typical)
253 mW (standard coil)
113 mW (sensitive coil)
130 mW (sensitive coil high capacity
version “T”)
4. Specifications subject to change without notice.
Max. Continuous
Dissipation
760 mW at 20°C (68°F) ambient
Temperature Rise
(at nominal voltage)
41°C (74°F) standard coil
22°C (40°F) sensitive coil
27°C (49°F) sensitive coil high capacity
version “T”
Temperature
Max. 155°C (311°F)
RELAY ORDERING DATA
STANDARD COIL - TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
ORDER NUMBER*
Coil Resistance
Nominal Coil
VDC
Must Operate
Max. Continuous
Form A (SPST)
Form C (SPDT)
VDC
VDC
Ohm ± 10
AZ770-1C-3D
AZ770-1C-5D
AZ770-1C-6D
AZ770-1C-9D
AZ770-1C-12D
AZ770-1C-18D
AZ770-1C-24D
AZ770-1C-48D
3
5
2.25
3.75
3.9
6.6
20
55
AZ770-1A-3D
AZ770-1A-5D
AZ770-1A-6D
AZ770-1A-9D
AZ770-1A-12D
AZ770-1A-18D
AZ770-1A-24D
AZ770-1A-48D
6
4.50
7.8
80
9
6.75
11.7
15.6
23.4
31.2
62.4
180
12
18
24
48
9.00
320
13.50
18.00
36.00
720
1,280
5,120
* “1A” or “1C” denote silver nickel contacts.
Substitute “AZ770T-1AE” in place of “AZ770-1A” for high capacity version.
Add suffix “E” at the end of order number for sealed version.
Add suffix “K” at the end of order number for different footprint (Type 2); not available for high capacity version “T”.
Add suffix “G” at the end of order number for gold plated contacts.
SENSITIVE COIL (STANDARD VERSION) - TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
Form A (SPST)
3
5
2.25
3.75
5.1
8.5
45
125
AZ770-1A-3DS
AZ770-1A-5DS
AZ770-1A-6DS
AZ770-1A-9DS
AZ770-1A-12DS
AZ770-1A-18DS
AZ770-1A-24DS
6
4.50
10.2
15.3
20.4
30.6
40.8
180
9
6.75
400
12
18
24
9.00
720
13.50
18.00
1,600
2,800
* “1A” or “1C” denote silver nickel contacts.
Add suffix “E” at the end of order number for sealed version.
Add suffix “K” at the end of order number for different footprint (Type 2).
Add suffix “G” at the end of order number for gold plated contacts.
9-2-11
AZ770
SENSITIVE COIL (HIGH CAPACITY VERSION “T”) - TYPE 1 FOOTPRINT
COIL SPECIFICATIONS
ORDER NUMBER*
Form A (SPST)
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Coil Resistance
Ohm ± 10%
3
5
2.25
3.75
5.1
8.5
38
108
AZ770T-1AE-3DS
AZ770T-1AE-5DS
AZ770T-1AE-6DS
AZ770T-1AE-9DS
AZ770T-1AE-12DS
AZ770T-1AE-18DS
AZ770T-1AE-24DS
AZ770T-1AE-48DS
6
4.50
10.2
15.3
20.4
30.6
40.8
81.6
155
9
6.75
350
12
18
24
48
9.00
620
13.50
18.00
36.00
1,390
2,480
9,920
* “1AE” denote silver tin oxide contacts.
Add suffix “E” at the end of order number for sealed version.
Add suffix “G” at the end of order number for gold plated contacts.
MECHANICAL DATA
PC BOARD LAYOUT
.703 Max
.407 Max
[17.85]
[10.35]
5 x ø .05
[ø 1.3]
.50
[12.7]
.60
[15.24]
5 x ø .05
[ø 1.3]
.1
[2.54]
.494 Max
[12.55]
.25
[6.35]
.30
[7.6]
.30
[7.6]
*
*
.157
[4]
.06
[1.5]
.157
[4.0]
.016
[0.4]
2 x .012
[0.3]
ø .02
[ø 0.5]
.03
[0.8]
Type 1
Type 2
*Not used on Form A version
Viewed toward terminals
Type 1
.407 Max
[10.35]
.703 Max
[17.85]
WIRING DIAGRAMS
3
3
1
1
2
.494 Max
[12.55]
4
4
5
5
2
*
*
.157
[4]
.016
[0.4]
Type 1
Type 2
.03
[0.8]
ø .02
[0.5]
3 x .012
[0.3]
Viewed toward terminals
*Not used on Form A version
Type 2
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
9-2-11
相关型号：
AZ770-1A-6DG
Power/Signal Relay, 1 Form A, SPST, Latched, 7.8VDC (Coil), 5A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output
AZETTLER
AZ770-1A-6DSEG
Electromechanical Relay, SPST, Latched, 10.2VDC (Coil), 5A (Contact), 30VDC (Contact), Random, AC/DC Output,
AZETTLER
AZ770-1A-6DSG
Power/Signal Relay, 1 Form A, SPST, Latched, 10.2VDC (Coil), 5A (Contact), 30VDC (Contact), DC Input, Random, AC/DC Output
AZETTLER
AZ770-1A-9DEG
Electromechanical Relay, SPST, Latched, 11.7VDC (Coil), 5A (Contact), 30VDC (Contact), Random, AC/DC Output,
AZETTLER
©2020 ICPDF网 联系我们和版权申明