SG-34FA240A40ZSL [AZETTLER]

“HOCKEY PUCK” SOLID STATE RELAY 40 THRU 80 AMPS 48 TO 530 VRMS; “冰球”固态继电器40 THRU 80安培48〜 530 VRMS


型号：	SG-34FA240A40ZSL
厂家：	AMERICAN ZETTLER, INC.
描述：	“HOCKEY PUCK” SOLID STATE RELAY 40 THRU 80 AMPS 48 TO 530 VRMS “冰球”固态继电器40 THRU 80安培48〜 530 VRMS 继电器固态继电器
文件：	总3页 (文件大小：383K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SG-34F

“HOCKEY PUCK”

SOLID STATE RELAY

40 THRU 80 AMPS

48 TO 530 VRMS

FEATURES

• Photo isolation

• Up to 1200V blocking voltage

• Both zero cross or random turn-on

• High surge capability

• Built-in snubber

• UL, CUR file E43203

• SCR Output Circuitry

INPUT

Type

DC Input

AC Input

Control Voltage Range

Turn On Voltage

3 to 32 VDC

3 VDC max.

1 VDC min.

90 to 280 VAC

90 VAC max.

Turn Off Voltage

10 VAC min.

Max. Input Current

Max. Reverse Voltage

OUTPUT

25 mA at 32 VDC

-32 VDC

Type

240

380

480

Output Voltage Range

Blocking Voltage

48 to 280 VAC

600 Vpk

48 to 400 VAC

800 Vpk

48 to 530 VAC

1200 Vpk

5 mA

Max. Leakage Current (off)

Max. Voltage Drop (at rated current)

5 mA

1.7 VRMS

Random Turn On (DC input): 1 ms

Zero Cross Turn On (DC input): 1/2 cycles + 1 ms

AC Input: 20 ms

Max. Turn-On Time

Max. Turn-Off Time

Min. Off-State (dv/dt)

DC Input: 1/2 cycle + 1 ms

AC Input: 40 ms

500 V/us

GENERAL

Dielectric Strength

Insulation Resistance

Max. Capacitance (in/out)

Ambient Temperature

4000 Vrms min. (at 50/60 Hz, 1 min.)

1000 Min. (at 500 VDC)

8 pf

Operating: -30°C (-22°F) to 80°C (176°F)

Storage: -30°C (122°F) to 100°C (212°F)

Panel Mount

Screw

Termination

Weight

88g

7/16/08W

SG-34F

RELAY ORDERING DATA

SG-34F

240

MODEL

INPUT

VOLTAGE

OPERATING

VOLTAGE RANGE

LOAD TYPE

LOAD

CURRENT

ZERO CROSS OUTPUT DEVICE

OR RANDOM

LED

INDICATOR

D: 3 to 32 Vdc

A: 90 to 280Vac*

240: 48 to 280 Vac

380: 48 to 400 Vac

480: 48 to 530 Vac

A: AC LOAD

40: 40A

50: 50A

60: 60A

70: 70A*

80: 80A*

Z: Zero cross

turn on

S: SCR

NIL: no LED

L: with LED

(not for AC

input type)

P: Random

turn on (not

available on

480V version)

*UL pending

MECHANICAL DATA

Outline Dimensions

Mounting

1.870

[47.5]

2-M.118

[M3.0]

2-M.157

[M4.0]

.902Max

[22.9]

.795Max

[20.2]

Wiring Diagram

Load power supply

1.870

[47.5]

2-Ø.177

[Ø4.5]

LOAD

(~)

(-)

(~)

(+)

INPUT

1.799MAX

[45.7]

1.098

[27.9]

.449

[11.4]

1.00

[25.4]

input control signal

1.743

[44.26]

.323

[8.2]

2.299MAX

[58.4]

Dimensions in inches with metric equivalents in parentheses. Tolerance:

.010ꢀ

INSTALLATION

PRECAUTIONS

1. When mounting the relays side by side, provide a space equivalent

to the width of a single SSR between two adjacent SSRs.

Otherwise, reduce the load current flow to 1/2 to 1/3 of the rated cur-

rent.

1. Before connecting a load that generates a high surge current,

such as a lamp load to the SSR, make sure that the SSR can

withstand the surge current of the load.

2. The product data sheet shows the non-repetitive peak value of

the surge current that flows through the SSR. Normally, use 1/2

of the non-repetitive peak surge current as the standard value. If

a surge current exceeding that value is expected, connect a

quick-blowing fuse to protect the SSR.

2. When mounting relays on heat sink surface, first apply a heat con-

ductive grease to the metal back surface of the SSR. Press the SSR

firmly onto the heat sink to ensure a good seal. Screw the SSR

down to the heat sink.

3. Next, wire the screw terminals and securely tighten the screws.

7/16/08W

SG-34F

CHARACTERISTIC CURVES

7/16/08W