DS18VP6R [BANNER]
DS18 Series Sensors;型号: | DS18VP6R |
厂家: | Banner Engineering |
描述: | DS18 Series Sensors |
文件: | 总5页 (文件大小:751K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DS18 Series Sensors
Datasheet
Miniature self-contained photoelectric sensors in a universal housing
•
•
Multiple mounting options accommodate almost any mounting requirements
Exceptional optical performance, comparable to larger “MINI-style” or barrel
sensors
•
•
Patented wide-beam retroreflective models for enhanced ease of alignment
10 to 30V dc operation, with solid-state complementary NPN or PNP
outputs, light operate or dark operate, depending on model
•
•
•
Bright output LED indicates object is within the sensor’s field of view
Rugged sealed housing with protected circuitry, rated IP67/NEMA 6
All models feature 18 mm threaded barrel and base for easy, versatile
mounting
•
Choose 2 m (6.5 ft) or 9 m (30 ft) cable, or 4-pin Euro-style or Pico-style
integral QD fitting or 150 mm (6 in) QD
Patent(s) issued or pending
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
1
Model
Sensing Mode
Sensing Beam
Range
Output
N/A
DS186E
Infrared, 940 nm
DS18VN6R
Opposed
20 m (65.6 ft)
NPN
PNP
Effective Beam: 13 mm (0.5 in)
DS18VP6R
DS18VN6LP
DS18VP6LP
DS18VN6LPW
DS18VP6LPW
DS18VN6FF50
DS18VP6FF50
DS18VN6FF100
DS18VP6FF100
NPN
PNP
Polarized Retroreflective
3.5 m (11.4 ft)
3.0 m (9.8 ft)
50 mm (2 in)
100 mm (4 in)
NPN
PNP
Wide-Angle Polarized
Retroreflective
Visible red, 660 nm
NPN
PNP
Fixed-Field
NPN
PNP
1
•
Only standard 2 m (6.5 ft) cable models are listed. For 9 m (30 ft) cable, add suffix “W/30” to the model number (for example,
DS186E W/30)
•
•
•
•
For 4-pin integral Euro-style QD, add suffix “Q8” (for example, DS186EQ8)
For 4-pin integral Pico-style QD, add suffix “Q7” (for example, DS186EQ7)
For 4-pin Euro-style 150 mm (6 in) pigtail QD, add suffix “Q5” (for example, DS186EQ5)
For 4-pin Pico-style 150 mm (6 in) pigtail QD, add suffix “Q” (for example, DS186EQ)
Original Document
128911 Rev. H
17 October 2016
128911
DS18 Series Sensors
Wiring Diagrams
NPN (Sinking) Outputs
PNP (Sourcing) Outputs
Emitters
Key
1 = Brown
2 = White
3 = Blue
3
1
–
10–30 V dc
+
+
3
1
1
4
2
10-30V dc
–
3
4 = Black
–
10-30V dc
+
4
Load
Load
Load
2
Load
Specifications
Supply Voltage
Output Configuration
10 to 30 V dc (10% maximum ripple) at less than 20 mA, exclusive of
load
Solid-state complementary; NPN or PNP (current sinking or sourcing),
depending on model
Protected against reverse polarity and transient voltages
Rating:
Output Response Time
100 mA combined load from −20 °C to +60 °C (−4 °F to +140 °F)
Opposed Mode: 800 microseconds ON; 400 microseconds OFF
All others: 2 milliseconds ON/OFF
Linearly derate combined load from 100 to 50 mA at temperatures
from +60 °C to 70 °C (140 °F to 158 °F )
Off-state leakage current:
NOTE: 100 millisecond delay on power-up;
outputs do not conduct during this time
NPN: less than 200 μA @ 30 V dc (See the Application Note)
PNP: less than 10 μA @ 30 V dc
Repeatability
ON-state saturation voltage:
Opposed Mode: 100 microseconds
All others: 350 microseconds
NPN: < 1.6 V @ 100 mA
PNP: < 3 V @ 100 mA
Indicators
2 LED indicators
Green solid: Power ON
Yellow (back cover) ON: Black wire (pin 4) is conducting; an object is
within sensor’s field of view
Protected against false pulse on power-up and continuous overload or
short circuit of outputs
Construction
ABS housing, 3 mm mounting hardware included
Connections
2 m (6.5 ft) 4-wire PVC cable, 9 m (30 ft) 4-wire PVC cable, 4-pin Pico-
style integral QD, 4-pin Euro-style integral QD, 4-pin Pico-style Pigtail
QD, or 4-pin Euro-style Pigtail QD, depending on model
Application Notes
Required Overcurrent Protection
NPN off-state leakage current is < 200 μA for load resistances > 3 kΩ
or optically isolated loads. For load current of 100 mA, leakage is < 1%
of load current.
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
Operating Conditions
Temperature: −20 °C to +70 °C (−4 °F to +158 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Environmental Rating
IEC IP67; NEMA 6; UL Type 1
Certifications
Industrial
Control
Equipment
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
3TJJ
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 128911 Rev. H
DS18 Series Sensors
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
M18 x 1 Jam Nut
24.2 mm
(0.95")
Cabled/Pigtail Models
8.0 mm
(0.32")
31.1 mm
(1.23")
20.9 mm
(0.82")
Euro-Style
Integral QD Models
Pico-Style
15.0 mm
(0.59")
Integral QD Models
17.1 mm
(0.67")
5.2 mm
(0.20")
Power ON
LED (Green)
Output LED
(Yellow)
24.1 mm
(0.95")
34.5 mm
(1.36")
47.9 mm
(1.89")
55.4 mm
(2.18")
59.9 mm
(2.36")
2X 3.2 mm
(Ø 0.13")
2X M18 X1-6g
11.3 mm
(0.44")
M8 X1-6g
M12 X1-6g
Ø24.0 mm
(0.95")
Performance Curves
Performance based on a 90% reflectance white
test card
1000
1000
DS186E and
DS18...R
DS18...FF50
E
E
X
X
Fixed-Field
DS186E and DS18...R
Opposed Mode
Opposed Mode
750 mm
30"
C
C
100
E
100
E
500 mm
250 mm
0
20"
10"
0
S
S
S
S
10
G
A
I
N
10
G
A
I
N
250 mm
500 mm
750 mm
10"
20"
30"
1
1
0.1 m
0.3'
1 m
3.3'
10 m
33'
100 m
330'
0.1 mm
0.004"
1.0 mm
0.04"
10.0 mm
0.4"
100 mm
4.0"
0
4 m
12'
8 m
26'
12 m
40'
16 m
52'
20 m
66'
DISTANCE
DISTANCE
DISTANCE
Figure 1. Opposed Mode—Excess Gain
Figure 2. Opposed Mode—Beam Pattern
Figure 3. Fixed-Field 50 mm—Excess Gain
Performance based on a 90% reflectance white
test card
1000
1000
DS18...LP
DS18...LPW
DS18...FF100
E
X
E
X
DS18...LP
DS18...LPW
Fixed-Field
Retroreflective Mode
C
60 mm
2.4"
C
100
100
E
with BRT-84 Reflector
E
S
S
40 mm
20 mm
0
1.6"
0.8"
0
S
S
Retroreflective Mode
with BRT-84 Reflector
10
10
G
A
I
N
G
A
I
20 mm
40 mm
60 mm
0.8"
1.6"
2.4"
N
1
1
0.01 m
0.03'
0.1 m
0.33'
1 m
3.3'
10 m
33'
0.1 mm
0.004"
1.0 mm
0.04"
10.0 mm
0.4"
100 mm
4.0"
0
0.75 m
2.5'
1.5 m
5'
2.25 m
7.5'
3.0 m
10'
3.75 m
12.5'
DISTANCE
DISTANCE
DISTANCE
Figure 4. Polarized Retroreflective—Excess Gain Figure 5. Polarized Retroreflective—Beam Pattern
Figure 6. Fixed-Field 100 mm——Excess Gain
P/N 128911 Rev. H
www.bannerengineering.com - Tel: +1-763-544-3164
3
DS18 Series Sensors
Accessories
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
4-Pin Snap-on M8/Pico-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
32 Typ.
PKG4-2
2 m (6.56 ft)
Straight
ø 9.0
4
3
2
1
29 Typ.
1 = Brown
2 = White
3 = Blue
PKW4Z-2
2 m (6.56 ft)
Right-Angle
15 Typ.
4 = Black
ø 10.9
Mounting Brackets
Retroreflectors
See http://www.bannerengineering.com for
complete information on retroreflectors.
SMB18A
30
C
•
Right-angle mounting bracket
with a curved slot for
versatile orientation
12-ga. stainless steel
18 mm sensor mounting hole
41
NOTE: Polarized sensors
require corner cube-type
retroreflectors.
A
B
•
•
•
46
Clearance for M4 (#8)
hardware
Hole center spacing: A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5
See http://www.bannerengineering.com for additional 18 mm
barrel mounting bracket options.
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 128911 Rev. H
DS18 Series Sensors
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection
applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval
by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product
specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most
recent version of any documentation, refer to: www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明