K30ANT2FGREQP [BANNER]
EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Pick-to-Light;型号: | K30ANT2FGREQP |
厂家: | Banner Engineering |
描述: | EZ-LIGHT® Touch Gen 2 K30 FDA-Grade Pick-to-Light |
文件: | 总4页 (文件大小:325K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade
Pick-to-Light
Datasheet
Compact, single-point devices for error-proofing of bin-picking operations
•
•
•
FDA-grade materials; rated to IEC IP67, IP68, and IP69K
Laser marked information withstands aggressive cleaning procedures
Excellent immunity to false triggering by water spray, detergents, oils, and other
foreign materials
•
Rugged, cost-effective and easy-to-install solutions for error-proofing and parts-
verification applications
•
•
Compact devices are completely self contained—No controller needed
Illuminated dome provides an easy-to-see green job light: some models also light
red for alternate operation
•
•
•
Easy actuation—no force required
12 to 30 V dc operation
Can be actuated with bare hands or in gloves
Models
1
Model
Function
Output
PNP, NO
PNP, NC
NPN, NO
NPN, NC
PNP, NO
PNP, NC
NPN, NO
NPN, NC
PNP, NO
PNP, NC
NPN, NO
NPN, NC
Connection
Job Light
K30APT2FGXDQP
K30RPT2FGXDQP
K30ANT2FGXDQP
K30RNT2FGXDQP
K30APT2FGRCQP
K30RPT2FGRCQP
K30ANT2FGRCQP
K30RNT2FGRCQP
K30APT2FGREQP
K30RPT2FGREQP
K30ANT2FGREQP
K30RNT2FGREQP
•
•
Job light is ON at all times while job input is active
Touch activates output
Green
150 mm (6 in) pigtail
PVC cable with a 4-
pin M12/Euro-style
male, stainless steel,
quick disconnect
(QD)
•
•
Job light is Green while job input is active
Touch activates output and overrides job light
(turns Red) for visual verification that action was
sensed
Green (Red)
Green (Red)
•
Job light is Green at all times while job input is
active
Touch activates output
A touch while job input is inactive causes unit to
light Red, providing visual verification that sensor
is functioning properly
•
•
Specifications
Supply Voltage
Power-Up Delay
12 to 30 V dc
300 milliseconds
Supply Current
Construction
55 mA max current (exclusive of load)
Base, dome, and nut: FDA-grade polycarbonate
Supply Protection Circuitry
Indicators
Protected against reverse polarity and transient voltages
Job ("Pick") Indicator: Green
Pick Sensed Indicator: Red or Off, depending on model
Output Rating
Maximum Load: 150 mA
ON-state saturation voltage: < 2 V at 10 mA dc; < 2.5 V at 150 mA
dc
Mounting
M22 × 1.5 Threaded base, max torque 2.25 N·m (20 in-lbf)
Connections
OFF-state leakage current: <10 µA at 30 V dc
150 mm (6 in) pigtail PVC cable with a 4-pin M12/Euro-style male,
stainless steel, quick disconnect (QD) or 2 m (6.5 ft) unterminated PVC-
jacketed cable, depending on model
Output Response Time:
150 milliseconds On and Off
1
To order the 2 m (6.5 ft) PVC cable models, omit suffix QP from model number (example, K30APT2FGXD). A model with a QD requires a
mating cable (see Cordsets).
Original Document
189834 Rev. C
10 February 2016
189834
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade Pick-to-Light
Vibration and Mechanical Shock
Required Overcurrent Protection
Vibration 10 Hz to 55 Hz 1.0 mm p-p amplitude per IEC 60068-2-6
Shock 30G 11 ms duration, half sine wave per IEC 60068-2-27
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
Environmental Rating
IEC IP67, IP69K per DIN 40050-9.
Storage
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to http://
www.bannerengineering.com.
–40 °C to +70 °C (–40 °F to +158 °F)
Operating Conditions
Temperature: –40 °C to +50 °C (–40 °F to +122 °F)
Humidity: 90% at 50 °C maximum relative humidity (non-
condensing)
Certifications
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Dimensions
41.0
[1.62]
23.5
[.93]
30.0
[1.18]
M22 X 1.5
Wiring Diagrams
NPN
PNP
Color Key
1
3
1
+
+
12-30V dc
–
12-30V dc
–
3
1 = Brown
2 = White
3 = Blue
4
2
4
Load
Load
4 = Black
2
Job Light
Enable > 7V dc
Job Light
Enable < 1.0V dc
Cabled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 189834 Rev. C
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade Pick-to-Light
Accessories
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
4-Pin Threaded M12/Euro-Style Cordsets—Washdown, Stainless Steel
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-WDSS-0406
MQDC-WDSS-0415
1.83 m (6 ft)
4.57 m (15 ft)
2
3
1
4
Ø15.5 mm
Straight
Ø4.8 mm
MQDC-WDSS-0430
9.14 m (30 ft)
1 = Brown
2 = White
3 = Blue
43.5 mm
4 = Black
Brackets
32
SMB22A
SMB22FVK
46
118
•
Right-angle bracket with curved slot
for versatile orientation
12-ga. stainless steel
•
V-clamp, flat bracket and fasteners
for mounting to pipe or extensions
Clamp accommodates 28 mm
diameter tubing or 1 in. square
extrusions
C
ø22.5
41
•
•
•
A
B
Mounting hole for 22 mm sensor
34
A
•
22 mm hole for mounting sensor
46
Hole size: A = ø 22.5
Hole center spacing: A to B = 26.0
Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2
P/N 189834 Rev. C
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
EZ-LIGHT Touch Gen 2 K30 FDA-Grade Pick-to-Light
45
SMB22RAVK
SMBAMS22P
A
C
•
•
•
V-clamp, right-angle bracket and
fasteners for mounting to pipe or
extensions
Clamp accommodates 28 mm
diameter tubing or 1 in. square
extrusions
•
Flat SMBAMS series bracket with 22
mm hole for mounting sensors
46
•
•
Articulation slots for 90+° rotation
12-ga. (2.6 mm) cold-rolled steel
A
93
B
90
57
22 mm hole for mounting sensor
Hole size: A = ø 22.5
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5
Ø A
45
SMBAMS22RA
TC-K30-CL
•
Right-angle SMBAMS series bracket
with 22 mm hole for mounting
sensors
•
Touch cover
C
53
B
A
•
•
Articulation slots for 90+° rotation
12-ga. (2.6 mm) cold-rolled steel
B
48
Diameter: A = 40.7
Height: B = 31
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5
All measurements are listed in millimeters, unless noted otherwise.
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号:
©2020 ICPDF网 联系我们和版权申明