K30LGYXPPB2Q [BANNER]
EZ-LIGHT® K30L Series With Independent Push Button Contact;
| 型号： | K30LGYXPPB2Q |
| 厂家： | 
Banner Engineering |
| 描述： | EZ-LIGHT® K30L Series With Independent Push Button Contact |
| 文件： | 总5页 (文件大小：273K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
EZ-LIGHT K30L Series With Independent
Push Button Contact
Datasheet
Compact Indicator with One, Two, or Three Colors and a Momentary Push Button Output
•
•
•
•
•
•
•
Rugged, cost-effective and easy-to-install multicolor indicator light with pushbutton
Waterproof IP65 construction for washdown environments
Excellent for panel mounting or as a stand-alone device
Immune to EMI and RFI interference
10 to 30V dc operation
Cabled and Quick Disconnect models available
Up to 3 independent colors in one unit
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
1
Family
Color 1
Color 2
Color 3
Input
Output
Connector
K30L
G
R
Y
P
PB2
Q
MODEL KEY
P = PNP
PB2 = Momentary
Push Button
Q = Integral M12/Euro-style
QD
G = Green
R = Red
O = Orange
T = Turquoise
V = Violet
Blank = 2 m (6.5 ft) PVC
cable
Y = Yellow
B = Blue
QP = 150 mm (6 in) PVC
cable with M12/Euro-style QD
M = Magenta
W = White
X = No color in this position
Example Model
K30LGXXPPB2Q
K30LRXXPPB2Q
K30LGRXPPB2Q
K30LGYXPPB2Q
K30LGRYPPB2Q
# of LED Colors
LED Indicators
Green
Connection
1
4-pin M12/Euro-style integral QD
Red
Green, Red
Green, Yellow
Green, Red, Yellow
2
3
5-pin M12/Euro-style integral QD
8-pin M12/Euro-style integral QD
Installation
Install the K30 sensor at such a height and in a location that will be easy for the user and/or supervisor to see the
indicator and comfortable for the user to press the push-button.
1
Integral quick disconnect models are listed.
•
•
•
To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, K30LGXXPPB2
To order the 150 mm (6 in) PVC cable model, replace the suffix "Q" with "QP" in the model number. For example, K30LGXXPPB2QP
Models with a quick disconnect require a mating cordset.
Original Document
162557 Rev. D
22 November 2016
162557
®
EZ-LIGHT K30L Series With Independent Push Button Contact
Wiring
4-Pin Models
Key
Sourcing (PNP) Input
1 = Brown
2 = White
3 = Blue
4 = Black
3
Indicator
C1 = Color 1
PB = Push Button
Color
10-30V dc
4
C1
1
PB
2
5-Pin Models
Key
Sourcing (PNP) Input
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
3
Indicator
C1 = Color 1
C2 = Color 2
PB = Push Button
Color
10-30V dc
4
1
2
5
C1
C2
PB
8-Pin Models
Key
Sourcing (PNP) Input
1 = White
2 = Brown
7 = Blue
7
Indicator
8 = Red (not used)
Color
10-30V dc
6
2
4
1
5
3 = Green (not used)
4 = Yellow
C1 = Color 1
C2 = Color 2
C3 = Color 3
PB = Push Button
C1
C2
C3
5 = Gray
6 = Pink
PB
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 162557 Rev. D
®
EZ-LIGHT K30L Series With Independent Push Button Contact
Specifications
Supply Voltage and Current
Required Overcurrent Protection
WARNING: Electrical connections must be
10 V dc to 30 V dc at 40 mA maximum per LED color
Supply Protection Circuitry
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
Protected against reverse polarity and transient voltages
Indicator Response Time
ON/OFF: 1 ms maximum
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Switch Contact Rating
150 mA at 30 V dc
Contact Bounce
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
10 ms max.
Environmental Rating
IEC IP65
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
Enclosure Type 13
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Construction
Base: polycarbonate
Translucent dome: polycarbonate
Push button: thermoplastic
Mounting Torque
2.25 Nm (20 in·lbf) max.
Connections
Integral M12/Euro-style quick disconnect (QD), 2 m (6.5 ft)
unterminated PVC-jacketed cable or 150 mm (6 in) PVC cable with a
quick disconnect (QD) , depending on the model ordered
Certifications
Operating Conditions
−40 °C to +50 °C (−40 °F to +122 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Storage Temperature: −40 °C to +70 °C (−40 °F to +158 °F)
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
P/N 162557 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
EZ-LIGHT K30L Series With Independent Push Button Contact
Accessories
Quick-Disconnect (QD) Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
2
3
44 Typ.
1
4
Straight
M12 x 1
ø 14.5
1 = Brown
2 = White
3 = Blue
MQDC-450
15.2 m (50 ft)
4 = Black
5-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC1-501.5
MQDC1-506
MQDC1-515
0.50 m (1.5 ft)
1.83 m (6 ft)
4.57 m (15 ft)
44 Typ.
Straight
M12 x 1
2
MQDC1-530
9.14 m (30 ft)
ø 14.5
1
4
3
MQDC1-506RA
MQDC1-515RA
1.83 m (6 ft)
4.57 m (15 ft)
5
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
30 Typ.
[1.18"]
Right-Angle
MQDC1-530RA
9.14 m (30 ft)
M12 x 1
ø 14.5 [0.57"]
8-Pin Threaded M12/Euro-Style Cordsets with Shield
Model
Length
Style
Dimensions
Pinout (Female)
2
3
4
44 Typ.
1
7
6
MQDC-806
1.83 m (6 ft)
5
8
Straight
M12 x 1
ø 14.5
MQDC-815
MQDC-830
4.57 m (15 ft)
9.14 m (30 ft)
1 = White
2 = Brown
3 = Green
4 = Yellow
5 = Gray
6 = Pink
7 = Blue
8 = Shield
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 162557 Rev. D
®
EZ-LIGHT K30L Series With Independent Push Button Contact
Brackets
SMB22A
32
•
Right-angle bracket with curved slot
for versatile orientation
C
41
•
•
12-ga. stainless steel
Mounting hole for 22 mm sensor
B
A
46
Hole center spacing: A to B = 26.0
Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection
applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval
by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product
specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most
recent version of any documentation, refer to: www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号：
K30P100M100SF2
Up to 100 MHz ARM Cortex-M4 core with DSP structions delivering 1.25 Dhrystone MIPS per MHz
FREESCALE
K30P121M100SF2
Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
FREESCALE
K30P144M100SF2_11
Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz
FREESCALE
©2020 ICPDF网 联系我们和版权申明