K30RPTGXDQ [BANNER]
EZ- LIGHT® Touch K30 Series Pick-to-Light;
| 型号： | K30RPTGXDQ |
| 厂家： | 
Banner Engineering |
| 描述： | EZ- LIGHT® Touch K30 Series Pick-to-Light |
| 文件： | 总4页 (文件大小：319K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
EZ- LIGHT Touch K30 Series Pick-to-Light
Datasheet
Compact, Single-Point Devices for Error-Proofing of Bin-Picking Operations
•
Rugged, cost-effective and easy-to-install solutions for error-proofing and parts-
verification applications
•
•
Compact devices are completely self contained—No controller needed
Illuminated dome provides an easy-to-see green job light: some models also light
red for alternate operation
•
•
•
•
Waterproof IP69K construction for washdown environments
Easy actuation—no force required
12 V dc to 30 V dc operation
Can be actuated with bare hands or in gloves
Models
1
Model
Function
Output
PNP, NO
PNP, NC
NPN, NO
NPN, NC
PNP, NO
PNP, NC
NPN, NO
NPN, NC
PNP, NO
PNP, NC
NPN, NO
NPN, NC
Connection
Job Light
K30APTGXDQ
K30RPTGXDQ
K30ANTGXDQ
K30RNTGXDQ
K30APTGRCQ
K30RPTGRCQ
K30ANTGRCQ
K30RNTGRCQ
K30APTGREQ
K30RPTGREQ
K30ANTGREQ
K30RNTGREQ
•
•
Job light is ON at all times while job input is active
Touch activates output
Green
•
•
Job light is Green while job input is active
Touch activates output and overrides job light
(turns Red) for visual verification that action was
sensed
Integral 4-pin M12/
Euro-style male quick
disconnect
Green (Red)
Green (Red)
•
Job light is Green at all times while job input is
active
Touch activates output
A touch while job input is inactive causes unit to
light Red, providing visual verification that sensor
is functioning properly
•
•
Wiring Diagrams
NPN
PNP
Color Key
1 = Brown
2 = White
3 = Blue
1
1
3
+
+
12-30V dc
–
12-30V dc
–
3
4
2
4 = Black
4
Load
Load
2
Job Light
Enable > 7V dc
Job Light
Enable < 1.0V dc
NOTE: Cabled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical.
1
Integral quick disconnect models are listed.
•
•
To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, K30APTGXD.
To order the 150 mm (6 in) PVC cable model with a 4-pin M12/Euro-style quick disconnect, replace the suffix "Q" with "QP" in the model
number. For example, K30APTGXDQP .
•
Models with a quick disconnect require a mating cordset.
Original Document
170454 Rev. E
21 November 2016
170454
®
EZ- LIGHT Touch K30 Series Pick-to-Light
Specifications
Supply Voltage
Power-Up Delay
12 V dc to 30 V dc
300 milliseconds
Supply Current
Construction
55 mA max current (exclusive of load)
Housing: polycarbonate
Translucent dome: polycarbonate
Mounting nut: PBT
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Indicators
Output Rating
Job ("pick") indicator: Green
Pick sensed indicator: Red or Off, depending on model
Maximum load: 150 mA
ON-state saturation voltage: < 2 V dc at 10 mA; < 2.5 V dc at 150
mA
Mounting
M22 × 1.5 Threaded base, max torque 2.25 N·m (20 in-lbf)
Connections
OFF-state leakage current: <10 µA at 30 V dc
Output Response Time:
150 milliseconds On and Off
Integral 4-pin M12/Euro style QD, or 2 m (6.5 ft) PVC integral cable
Vibration and Mechanical Shock
Required Overcurrent Protection
All models meet Mil. Std. 202F requirements method 201A (vibration:
10 Hz to 60 Hz max., double amplitude 0.06 in. maximum
acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms duration, half
sine wave.
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
Environmental Rating
IEC IP67, IP69K per DIN 40050-9.
Cabled models also meet IP69K if the cable and cable entrance are
protected from high-pressure spray.
Enclosure Type 4X, 13
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Storage
–40 °C to +70 °C (–40 °F to +158 °F)
Operating Conditions
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
Temperature: –40 °C to +50 °C (–40 °F to +122 °F)
Humidity: 90% at 50 °C maximum relative humidity (non-
condensing)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Certifications
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 170454 Rev. E
®
EZ- LIGHT Touch K30 Series Pick-to-Light
Accessories
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
Brackets
SMB22A
SMB22FVK
32
46
118
•
Right-angle bracket with curved slot
for versatile orientation
12-ga. stainless steel
•
V-clamp, flat bracket and fasteners
for mounting to pipe or extensions
C
ø22.5
41
•
•
•
Clamp accommodates 28 mm
diameter tubing or 1 in. square
extrusions
A
B
Mounting hole for 22 mm sensor
34
A
•
22 mm hole for mounting sensor
46
Hole size: A = ø 22.5
Hole center spacing: A to B = 26.0
Hole size: A = ø 4.6, B = 4.6 x 16.9, C = 22.2
45
SMB22RAVK
SMBAMS22P
A
•
•
•
V-clamp, right-angle bracket and
fasteners for mounting to pipe or
extensions
Clamp accommodates 28 mm
diameter tubing or 1 in. square
extrusions
•
Flat SMBAMS series bracket with 22
C
mm hole for mounting sensors
Articulation slots for 90+° rotation
12-ga. (2.6 mm) cold-rolled steel
46
•
•
A
93
B
90
57
22 mm hole for mounting sensor
Hole size: A = ø 22.5
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5
Ø A
SMBAMS22RA
45
TC-K30-CL
•
Right-angle SMBAMS series bracket
with 22 mm hole for mounting
sensors
•
Touch cover
C
53
B
A
•
•
Articulation slots for 90+° rotation
12-ga. (2.6 mm) cold-rolled steel
B
48
Diameter: A = 40.7
Height: B = 31
Hole center spacing: A = 26.0, A to B = 13.0
Hole size: A = 26.8 x 7.0, B = ø 6.5, C = ø 22.5
All measurements are listed in millimeters, unless noted otherwise.
P/N 170454 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
EZ- LIGHT Touch K30 Series Pick-to-Light
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection
applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval
by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product
specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most
recent version of any documentation, refer to: www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明