K70APT2GXDQ [BANNER]
EZ-LIGHT® Touch K70 Series Pick-to-Light;
| 型号： | K70APT2GXDQ |
| 厂家： | 
Banner Engineering |
| 描述： | EZ-LIGHT® Touch K70 Series Pick-to-Light |
| 文件： | 总4页 (文件大小：323K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
®
EZ-LIGHT Touch K70 Series Pick-to-Light
Datasheet
Compact, Single-Point Devices for Error-Proofing of Bin-Picking Operations
•
•
Excellent immunity to false triggering by water spray, detergents, oils, and other
foreign materials
Rugged, cost-effective and easy-to-install solutions for error-proofing and parts-
verification applications
•
•
Compact devices are completely self contained—No controller needed
Illuminated dome provides an easy-to-see green job light: some models also light
red for alternate operation
•
•
•
Easy actuation—no force required
12 V to 30 V dc operation
Can be actuated with bare hands or in gloves
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
1
Model
Function
Output
PNP, N.O.
PNP, N.C.
NPN, N.O.
NPN, N.C.
PNP, N.O.
PNP, N.C.
NPN, N.O.
NPN, N.C.
PNP, N.O.
PNP, N.C.
NPN, N.O.
NPN, N.C.
Connection
Job Light
K70APT2GXDQ
K70RPT2GXDQ
K70ANT2GXDQ
K70RNT2GXDQ
K70APT2GRCQ
K70RPT2GRCQ
K70ANT2GRCQ
K70RNT2GRCQ
K70APT2GREQ
K70RPT2GREQ
K70ANT2GREQ
K70RNT2GREQ
•
•
Job light is ON at all times while job input is active
Touch activates output
Green
•
•
Job light is green while job input is active
Touch activates output and overrides job light (turns red)
for visual verification that action was sensed
Integral 4-pin M12/
Euro-style male quick
disconnect (QD)
Green (Red)
Green (Red)
•
•
•
Job light is green at all times while job input is active
Touch activates output
A touch while job input is inactive causes unit to light red,
providing visual verification that sensor is functioning
properly
1
Integral quick disconnect models are listed.
•
•
To order the 2 m (6.5 ft) PVC cable model, omit the suffix "Q" in the model number. For example, K70APT2GXD.
Models with a quick disconnect require a mating cordset.
Original Document
189839 Rev. C
22 July 2016
189839
®
EZ-LIGHT Touch K70 Series Pick-to-Light
Specifications
Supply Voltage
Connections
12 V to 30 V dc
Integral 4-pin M12/Euro-style male quick disconnect (QD); or 2 m (6.5
ft) unterminated PVC-jacketed cable
Supply Current
Indicators
< 220 mA maximum current at 12 V dc (exclusive of load)
< 110 mA maximum current at 30 V dc (exclusive of load)
Job pick indicator: Green
Pick sensed indicator: Red or off, depending on model
Supply Protection Circuitry
Indicator Lumens
Protected against reverse polarity and transient voltages
Output Rating
Color
Green
Red
Typical Wavelength
525 nm
Typical Intensity (lm)
Maximum load: 150 mA
ON-State saturation voltage: < 2 V dc at 10 mA ; < 2.5 V dc at 150
mA
45
26
OFF-State leakage current: < 10 µA at 30 V dc
625 nm
Output Response Time:
50 ms ON and OFF
Environmental Rating
Required Overcurrent Protection
IEC IP65
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
Storage
−40 °C to +70 °C (−40 °F to +158 °F)
Operating Conditions
−40 °C to +50 °C (−40 °F to +122 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to http://
www.bannerengineering.com.
Vibration and Mechanical Shock
Vibration 10 Hz to 55 Hz 1.0 mm p-p amplitude per IEC 60068-2-6
Shock 30G 11 ms duration, half sine wave per IEC 60068-2-27
Construction
Housing and dome: Polycarbonate
Mounting nut: PBT
Supply Wiring
(AWG)
Required Overcurrent Protection
(Amps)
Power-Up Delay
300 ms
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Mounting
M30 × 1.5 threaded base; maximum torque 4.5 N·m (40 in·lbf)
Certifications
Dimensions
R31.8
[1.25]
70.0
[2.76]
63.5
[2.50]
49.7
[1.96]
20.9
[.82]
24.9
[.98]
M30 x 1.5-6g
M12 x 1-6g
8.0
[.32]
All measurements are listed in millimeters [inches], unless noted otherwise.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 189839 Rev. C
®
EZ-LIGHT Touch K70 Series Pick-to-Light
Wiring Diagrams
NPN
PNP
Color Key
1 = Brown
2 = White
3 = Blue
1
3
1
+
+
12-30V dc
–
12-30V dc
–
3
4
2
4 = Black
4
2
Load
Load
Job Light
Enable > 7V dc
Job Light
Enable < 1.0V dc
NOTE: Cabled wiring diagrams are shown. Quick disconnect (QD) wiring diagrams are functionally identical.
Accessories
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
Brackets
SMB30A
45
60
B
85
•
Right-angle bracket with
curved slot for versatile
orientation
Clearance for M6 (¼ in)
hardware
Mounting hole for 30 mm
sensor
45
SSA-MBK-EEC1
C
•
•
Single 30 mm hole
8 gauge steel, black finish
(powder coat)
61
•
•
•
B
80
A
•
Front surface for customer
applied labels
69
A
12-ga. stainless steel
Hole center spacing: A to B=40
Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5
Hole size: A = ø 7 , B = ø 30
P/N 189839 Rev. C
www.bannerengineering.com - Tel: +1-763-544-3164
3
®
EZ-LIGHT Touch K70 Series Pick-to-Light
SMB30FVK
SMB30MM
•
•
•
V-clamp, flat bracket and
fasteners for mounting to
pipe or extensions
Clamp accommodates 28
mm dia. tubing or 1 in.
square extrusions
30 mm hole for mounting
sensors
•
12-ga. stainless steel bracket
with curved mounting slots
for versatile orientation
Clearance for M6 (¼ in)
hardware
Mounting hole for 30 mm
sensor
57
70
46
A
118
C
•
•
57
B
A
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
Hole size: A= ø 31
45
SMB30RAVK
SMBAMS30P
A
•
•
•
V-clamp, right-angle bracket
and fasteners for mounting
sensors to pipe or extrusion
Clamp accommodates 28
mm dia. tubing or 1 in.
square extrusions
30 mm hole for mounting
sensors
•
•
Flat SMBAMS series bracket
30 mm hole for mounting
sensors
C
46
A
93
•
•
Articulation slots for 90°+
rotation
12-ga. 300 series stainless
steel
B
90
57
Hole center spacing: A=26.0, A to B=13.0
Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0
Hole size: A = ø 30.5
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
Copyright Notice
Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not
intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product
warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any
©
time. For the most recent version of any documentation, refer to: www.bannerengineering.com.
Banner Engineering Corp. All rights reserved.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号：
©2020 ICPDF网 联系我们和版权申明