LEDRI150-3M [BANNER]
LED..I150-3.. Low-Angle LED Ring Lights (150 mm);
| 型号： | LEDRI150-3M |
| 厂家： | 
Banner Engineering |
| 描述： | LED..I150-3.. Low-Angle LED Ring Lights (150 mm) |
| 文件： | 总2页 (文件大小：234K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
LED..I150-3.. Low-Angle LED Ring Lights (150 mm)
Non-Diffused Lighting for Increased Close-Up Contrast
Features
• 150 mm LED ring light for low-angle illumination. See Banner’s website at
www.bannerengineering.com for a complete lighting tutorial.
• Uses 3 tiers of LEDs mounted at 75° to the optical axis.
• Low-angle light enhances contrast of surface defects, etching, and embossed marks.
• Well suited for dot-peened or pin-stamped data matrix marks.
• Solid-state LED light source.
• Continuous or strobed operation is selectable via sensor software.
• Black anodized aluminum housing with ¼ - 20 threaded mounting holes.
• The suggested field of view is 80 mm in diameter and the suggested stand off
is 12.5 mm.
Models
Supply Voltage
and Current
Models*
LEDRI150-3W
LEDII150-3W
Illumination
Color
Cable/Connector
Visible Red
640 nm
24V dc 10% @ 500 mA max.
3-conductor, 2 m (6.5')
attached cable with flying
leads (see wiring table)
Infrared
880 nm
24V dc 10% @ 350 mA max.
24V dc 10% @ 500 mA max.
High-intensity,
low-angle light
Visible Red
640 nm
2 m (6.5') pigtail with
3-pin, 8 mm male
Pico-style connector
(direct connection to
PresencePLUS P4)
LEDRI150-3M
LEDII150-3M
Voltage supplied by PresencePLUS sensor,
if operating at 24V dc (see sensor manual).
24V dc 10% @ 350 mA max.
Infrared
880 nm
Voltage supplied by PresencePLUS sensor,
if operating at 24V dc (see sensor manual).
*For 9 m (30') cable, add suffix “W30” to the model number (e.g., LEDRI150-3W W30).
Specifications
Useful Life
When operated within specification, output will decrease less than 20% after 20,000 hours and less than 30%
after 30,000 hours.
NOTE: Actual useful life of strobed lights depends on duty cycle.
Environmental Rating
Operating Conditions
IEC IP0; NEMA 0
Temperature: 0° to +50° C (+32° to 122° F)
Maximum relative humidity: 90% at 50° C (non-condensing) max.
Cleaning Instructions
Certifications
Regularly remove any dust and dirt from the light source. Blow off dust using anti-static compressed air.
Printed in USA
11/06
P/N 127582 rev. A
LED..I150-3.. 3-Tier Low-Angle Ring Light (150 mm)
Dimensions
¼ - 20 threaded hole (x8)
Allow max. screw length 0.875" inside housing
192.5 mm (7.58")
25.8 mm (1.02")
13.1 mm (0.52")
96.2 mm (3.79")
192.5 mm
(7.58")
127.0 mm
(5.0")
127.0 mm
(5.0")
96.2 mm
(3.79")
32.7 mm
(1.28")
32.
(1
Ø 127.0 mm
(Ø 5.0" )
32.7 mm
(1.28")
127.0 mm (5.0")
Wiring Table
LED..I150-3W
Wire
PresencePLUSPro
External Power Supply
(Strobed)
External Power Supply
(Continuous)
Controller Terminal Block
Pin 1, +V (24V dc 10%)
Pin 2, -V (dc common)
Pin 4 (strobe)
Brown
Blue
+V
-V
+V
-V
-V
Black
+5V dc OFF
-V ON
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or replace,
free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty
does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or
implied.
P/N 127582 rev. A
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
相关型号：
©2020 ICPDF网 联系我们和版权申明