LEDWLB435XWG-XQ [BANNER]
High-Power Unsealed Linear Backlights;型号: | LEDWLB435XWG-XQ |
厂家: | Banner Engineering |
描述: | High-Power Unsealed Linear Backlights |
文件: | 总3页 (文件大小:192K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
High-Power Unsealed Linear Backlights
Datasheet
Lighting for use with Vision Systems
•
•
Four high-intensity, visible wavelengths, plus IR
The following array lengths are available:
145 mm (5.7 in)
290 mm (11.4 in)
435 mm (17.7 in)
580 mm (22.8 in)
870 mm (34.2 in)
1160 mm (45.6 in)
•
High-power, solid-state LED array; continuous or strobed operation is selectable via sensor software (P4
models) or via hookup
•
•
•
•
•
•
•
Optically isolated strobe signal
Selectable Active High or Active Low strobe option
Maintenance-free, rugged construction
Built-in constant current regulation
Very even light pattern
Can also be used as a highly diffused area light
Diffused backlight for any Vision System
Model Key
Light
Source
Linear
Array
Relative
Intensity
LED Color
Array Length
145
Housing
X
Window Material
W
Intensity Control
X
Connector
Q
LED
R
LB
6-
145 mm (5.7 in)
290 mm (11.4 in)
435 mm (17.7 in)
580 mm (22.8 in)
870 mm (34.2 in)
1160 mm (45.6 in)
R = Red
W = White
B = Blue
G = Green
I = IR
X = IP50
W = White Plastic
X = Not Adjustable
Q = QD
Wiring
®
Cable Wire
PresencePLUS Pro
Wire Purpose
Wire Connections
1
Color
Controller Terminal Block
2
Power Wires
Brown (1)
Blue (3)
+24 V dc
common
Pin 01
Pin 02
Strobe Polarity Control
Strobe Voltage Wires
Gray (5)
Active Low: open
Pin 02 or open
Pin 04
Active High: connect to common (Blue wire)
White (2)
Black (4)
Active Low: 0 V dc = ON
Active High: 0 V dc = OFF
+5 V dc to 24 V dc = OFF
+5 V dc to 24 V dc = ON
Strobe common
Pin 02
(2) Strobe (+/0)
(1) +24V dc
(3) Common
(4) Strobe Common
(5)Active High/Active Low
Figure 1. Pinouts for Mating Cable
Note: Connection to earth ground recommended.
1
2
For Banner-supplied wire.
When connecting the light to a PresencePLUS Pro controller terminal block, the controller supply must be 24 V dc 10ꢀ.
®
Original Document
166314 Rev. E
13 March 2019
166314
High-Power Unsealed Linear Backlights
Specifications
Light Source
Connections
Integral 5-pin M12/Euro-style quick disconnect, accessory cordset required
Construction
Housing: black anodized aluminum
Window: acrylic
Useful Life
When operated within specifications, output will decrease less than 30ꢀ after 50,000
hours
Operating Conditions
Temperature: 0 °C to +50 °C (+32 °F to +122 °F)
LED Color
Wavelength
Optional Filter3
Infrared
Red
850 nm
FLTI
620 nm to 630 nm
465 nm to 485 nm
520 nm to 535 nm
5000 K to 8300 K
FTLR
FLTB
FLTG
Blue
Green
White
FLTB or FLTG
Mounting
4 M5 T-nuts included, brackets available
Environmental Rating
IEC IP50
Certification
Supply Voltage and Current
145 mm Models: 24 V dc 10ꢀ at 500 mA maꢁ.
290 mm Models: 24 V dc 10ꢀ at 1 A maꢁ.
435 mm Models: 24 V dc 10ꢀ at 1.5 A maꢁ.
580 mm Models: 24 V dc 10ꢀ at 2 A maꢁ.
870 mm Models: 24 V dc 10ꢀ at 3 A maꢁ.
1160 mm Models: 24 V dc 10ꢀ at 4 A maꢁ.
Strobe Voltage: 5 V dc to 24 V dc
Built-in constant current regulator for LEDs
Use only with a suitable Class 2 power supply (UL) or SELV power supply (CE)
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
16.1
[.64]
L
59.4
[2.34]
32.6
[1.28]
B
A
A = Window
B = 5-pin Euro-style male connector
Array Length
Length "L"
171 mm (6.73 in)
Lighted Area "A"
145 mm
290 mm
435 mm
580 mm
870 mm
1160 mm
161 ꢁ 35 mm (6.33 in ꢁ 1.38 in)
307 ꢁ 35 mm (12.09 in ꢁ 1.38 in)
452 ꢁ 35 mm (17.80 in ꢁ 1.38 in)
598 ꢁ 35 mm (23.54 in ꢁ 1.38 in)
889 ꢁ 35 mm (35.00 in ꢁ 1.38 in)
1180 ꢁ 35 mm (46.46 in ꢁ 1.38 in)
316.5 mm (12.46 in)
462 mm (18.19 in)
607.5 mm (23.92 in)
898.5 mm (35.37 in)
1189.5 mm (46.83 in)
Accessories
Cordsets
5-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC20-506
MQDC20-515
1.83 m (6 ft)
2
4.57 m (15 ft)
1
4
42 Typ.
[1.65"]
3
5
Straight
1 = Brown
2 = White
3 = Blue
MQDC20-530
9.14 m (30 ft)
M12 x 1
ø 15 [0.59"]
4 = Black
5 = Gray
3
®
Recommended Ambient Light filter kit for use with PresencePLUS Cameras.
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 166314 Rev. E
High-Power Unsealed Linear Backlights
Brackets
SMBLAXRA
SMBLAXU
29
65
•
Right-angle stainless steel
•
•
U-shaped stainless steel bracket
For use with SMBLAXRA to
provide swivel adjustment
95
bracket
4X Ø7
•
May be used individually or in
combination with SMBLAXU to
provide swivel adjustment
4X Ø6.6
58
4X Ø7
33
4X Ø6.6
2X Ø5.4
65.5
2X Ø5.4
Includes:
•
•
•
2 Brackets
4 M5 screws (socket drive, button head)
4 M5 T-nuts
Includes:
•
•
2 Brackets
4 M5 screws (socket-drive,
button head)
65.5
4X Ø6.6
4X Ø7
•
•
4 M5 T-nuts
Four each stainless steel ¼-20
screws (socket drive, button
head), lock nuts, washers
4X Ø5.4
58
Combination View
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,
any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the
improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is eꢁclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER
PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner
Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such
purposes will void the product warranty. Any modifications to this product without prior eꢁpress approval by Banner Engineering Corp will void the product warranties. All specifications published in this
document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is
provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明