Q45BB6DLQ5 概述
Q45BB6 Series Sensors
Q45BB6DLQ5 数据手册
通过下载Q45BB6DLQ5数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载Q45BB6 Series Sensors
Datasheet
10 V dc to 30 V dc Photoelectric Sensors With Sinking and Sourcing Solid-State Outputs
•
Advanced one-piece photoelectric sensors with outstanding optical performance and
extremely rugged design
•
•
•
Operate from: 10 V dc to 30 V dc
Bipolar NPN (sinking)/PNP (sourcing) outputs on all models
Multiple sensing modes available: opposed, diffuse, retroreflective, and convergent,
plus glass and plastic fiber optic models
•
•
Selectable light/dark operate
Versatile plug-in modules available for output timing logic and/or signal strength
display
Highly visible Power, Signal (AID System ), and Output indicator LEDs
Choice of prewired 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, plus Mini-style or
Euro-style quick-disconnect fittings
1
™
•
•
•
•
Versatile mounting options
Designed to withstand 1200 psi washdown; exceeds its NEMA 6P and IEC IP67 rating
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
To order the 9 m (30 ft) cable models, add the suffix "W/30" to the cabled model number. Models with a quick disconnect
(QD) connector require a mating cable.
Opposed-Mode Emitter (E) and Receiver (R) Models
Because of their extremely high excess gain, these opposed-mode sensors are an excellent option
for sensing in contaminated or dirty areas, and are also the best choice for long-range sensing.
OPPOSED
Infrared, 880 nm
Models
Range
Cable
Supply Voltage
Output Type
Q456E Emitter
2-wire 2 m (6.5 ft) cable
4-wire 2 m (6.5 ft) cable
Q45BB6R Receiver
Q456EQ Emitter
Q45BB6RQ Receiver
Q456EQ5 Emitter
Q45BB6RQ5 Receiver
60 m (200 ft)
4-Pin Mini-style QD
4-pin Euro-style QD
10 V dc to 30 V dc
Bipolar NPN/PNP
1
U.S. Patent no. 4356393
Original Document
36578 Rev. E
11 November 2016
36578
Q45BB6 Series Sensors
Retroreflective-Mode Models
The visible red sensing beam of these sensors makes them very easy to align. Model
Q45BB6LP polarizes the emitted light and filters out unwanted reflections, making
sensing possible in applications otherwise considered unsuited to retroreflective
sensing. Specified using the model BRT-3 3-inch reflector (go to
P
RETRO
POLAR RETRO
www.bannerengineering.com additional information).
Visible red, 680 nm
(non-polarized)
Visible red, 680 nm
(polarized)
Non-Polarized
Models
Range
Cable
Supply Voltage
Output Type
Q45BB6LV
Q45BB6LVQ
Q45BB6LVQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
0.08 to 9 m (3 in to 30 ft)
10 V dc to 30 V dc
Bipolar NPN/PNP
Polarized
Cable
Models
Range
Supply Voltage
Output Type
Q45BB6LP
Q45BB6LPQ
Q45BB6LPQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
0.15 to 6 m (6 in to 20 ft)
10 V dc to 30 V dc
Bipolar NPN/PNP
Diffuse-Mode Models
These diffuse-mode models detect objects by sensing the reflection of their own emitted light. Ideal for
use when the reflectivity and profile of the object to be sensed are sufficient to return a large percentage
of emitted light back to the sensor. Model Q45BB6DX is the first choice for diffuse-mode applications
when there are no background objects to falsely return light.
DIFFUSE
Infrared, 880 nm
Short Range
Models
Range
Cable
Supply Voltage
Output Type
Q45BB6D
Q45BB6DQ
Q45BB6DQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
45 cm (18 in)
10 V dc to 30 V dc
Bipolar NPN/PNP
Long Range
Cable
Models
Range
Supply Voltage
Output Type
Q45BB6DL
Q45BB6DLQ
Q45BB6DLQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
1.8 m (6 ft)
10 V dc to 30 V dc
Bipolar NPN/PNP
High Power
Cable
Models
Range
Supply Voltage
Output Type
Q45BB6DX
Q45BB6DXQ
Q45BB6DXQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
3 m (10 ft)
10 V dc to 30 V dc
Bipolar NPN/PNP
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36578 Rev. E
Q45BB6 Series Sensors
Convergent-Mode Models
These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the
position of parts approaching from the side. Ignores all but highly reflective objects that are outside the
sensing range.
CONVERGENT
Visible red, 680 nm
Models
Focus
Cable
Supply Voltage
Output Type
Q45BB6CV
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
38 mm (1.5 in)
Q45BB6CVQ
Q45BB6CVQ5
Q45BB6CV4
Q45BB6CV4Q
Q45BB6CV4Q5
10 V dc to 30 V dc
Bipolar NPN/PNP
Spot Size at Focus:
1.3 mm (0.05 in)
100 mm (4 in)
10 V dc to 30 V dc
Bipolar NPN/PNP
Spot Size at Focus:
1.5 mm (0.06 in)
Glass Fiber Optic Models
These models are an excellent choice for glass fiber optic applications where faster sensor response is not
important. Their high excess gain means that opposed individual fibers can operate reliably in many very
hostile environments. Also, special miniature bifurcated fiber optic assemblies with bundle sizes as small as
0.5 mm (.020 in) diameter may be used successfully for diffuse-mode sensing when using sensor model
Q45BB6F(Q). For more information on compatible glass fiber optics, go to www.bannerengineering.com.
GLASS FIBER
Infrared, 880 nm and
Visible red, 650 nm
Range: Range varies by sensing mode and fiber optics used.
Infrared, 880 nm
Models
Cable
Supply Voltage
Output Type
Q45BB6F
Q45BB6FQ
Q45BB6FQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
10 V dc to 30 V dc
Bipolar NPN/PNP
Visible Red, 650 nm
Models
Cable
Supply Voltage
Output Type
Q45BB6FV
Q45BB6FVQ
Q45BB6FVQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
10 V dc to 30 V dc
Bipolar NPN/PNP
Plastic Fiber Optic Models
Lower in cost than glass fiber optics, plastic fiber optics are ideal for use in situations where environmental
conditions allow (for example, low levels of acids, alkalis, and solvents). Most are easily cut to length in the
field, and are available in a variety of sensing end styles. For more information on compatible plastic fiber
optics, go to www.bannerengineering.com.
PLASTIC FIBER
Visible red, 660 nm
Range: Range varies by sensing mode and fiber optics used.
Models
Cable
Supply Voltage
Output Type
Q45BB6FP
Q45BB6FPQ
Q45BB6FPQ5
4-wire 2 m (6.5 ft) cable
4-Pin Mini-style QD
4-Pin Euro-style QD
10 V dc to 30 V dc
Bipolar NPN/PNP
P/N 36578 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
3
Q45BB6 Series Sensors
Overview
Status indicator LEDs for power, signal, and output are clearly visible beneath a raised dome in the sensor’s transparent o-
ring-sealed polycarbonate cover. Also located beneath the sensor’s o-ring-sealed cover are controls for light/dark operate
selection and the sensitivity adjustment.
•
•
The power indicator (green) lights when power is applied to the sensor.
The signal indicator (red) lights when the sensor sees its modulated light source and pulses at a rate proportional
2
™
to the strength of the received light signal; this is the AID Alignment Indicating Device .
•
The output indicator (amber) lights when the sensor’s output is conducting. This indicator is especially useful when
a timing logic module is used and signal and output conditions are not concurrent.
1. Sensitivity adjustment
2. LEDs
6
5
•
•
•
Green LED: Power on indicator
Red LED: Signal indicator
Amber LED: Output status indicator
1
3. Optional LED signal strength display
4. Optional timing adjustment
5. Optional timing adjustment
6. Light/dark operate switch
2
3
4
Wiring Diagrams
Q45BB6 Sensors with Attached Cable
Q456E Emitters with Attached Cable
Key:
1=Brown
1
+
2=White
3=Blue
4=Black
10-30V dc
3
3
–
–
2
10-30V dc
Load
1
4
+
Load
NOTE: Wiring for quick disconnect (QD) models (model suffix Q and Q5) are functionally identical.
2
US patent no. 4356393
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36578 Rev. E
Q45BB6 Series Sensors
Specifications
Supply Voltage and Current
Indicators
Indicator LEDs are clearly visible beneath a raised transparent Lexan
dome on top of the sensor.
®
10 V dc to 30V dc (10% maximum ripple), at less than 50 mA
(exclusive of load)
Power (green) LED lights whenever 10 V dc to 30V dc power is applied,
and flashes to indicate output overload or output short circuit
Signal (red) AID System LED lights whenever the sensor sees its
modulated light source, and pulses at a rate proportional to the
strength of the received light signal
Load (amber) LED lights whenever the output is energized
Optional 7-element LED signal strength display modules
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
™
Output Configuration
Bipolar: one current sourcing (PNP) and one current sinking (NPN)
open-collector transistor
Output Rating
250 mA maximum each output up to 50 °C, derated to 150 mA at
70 °C (derates 5 mA/°C)
Off-state leakage current less than 1 µA
Output saturation voltage (both outputs) less than 1 V at 10 mA and
less than 2 V at 250 mA
Construction
Molded reinforced thermoplastic polyester housing, o-ring-sealed
transparent Lexan
hardware. Designed to withstand 1200 psi washdown. The base of the
cabled models has a ½-inch NPS integral internal conduit thread.
3
®
cover, molded acrylic lenses, and stainless steel
Output Protection Circuitry
Environmental Rating
Protected against false pulse on power-up and continuous overload or
short circuit of outputs
NEMA 6, IEC IP67
Connections
Output Response Time
PVC-jacketed 2 m (6.5 ft) or 9 m (30 ft) cables; or 4-pin Mini-style
(“Q” suffix models) or 4-pin Euro-style (“Q5” suffix models) quick-
disconnect (QD) fittings are available. QD cables are ordered
separately.
Opposed mode: 2 milliseconds ON, 1 millisecond OFF
All other sensing modes: 2 milliseconds ON/OFF
NOTE: 100 millisecond delay on power-up.
Output is non-conducting during this time.
Operating Conditions
Temperature: −40 °C to +70 °C (−40 °F to +158 °F)
90% at +50 °C maximum relative humidity (non-condensing)
Repeatability
Opposed mode: 0.25 milliseconds
All other sensing modes: 0.5 milliseconds
Response time and repeatability specifications are independent of
signal strength.
Application Notes
Optional output timing modules are available. See Output Timing Logic
and Signal Strength Display Modules on page 9.
Certifications
Adjustments
Beneath sensor’s transparent cover: Light/Dark Operate select switch
and multi-turn Sensitivity control (allows precise sensitivity setting –
turn clockwise to increase gain). Optional logic and logic/display
modules have adjustable timing functions (see Output Timing Logic and
Signal Strength Display Modules on page 9)
Dimensions
Opposed, Retro, and Diffuse Sensing Modes (Model Suffix E, R, D, DL, DX, LP, and LV)
Cabled Models
Mini-Style Quick-Disconnect
Models
Euro-Style Quick Disconnect
Models
54.1 mm
(2.13")
44.5 mm
(1.75")
Lens Centerline
50.8 mm
(2.00")
69.0 mm
(2.72")
6.4 mm (0.25")
87.6 mm
(3.45")
4.5 mm (#10) Screw
Clearance (2)
7.1 mm
(0.28")
30.0 mm
(1.18")
Internal Thread
(1/2–14NPSM)
ø 6.1 (0.24")
2m (6.5') Cable
External Thread
M30 X 1.5
External thread (M30 x 1.5)
hex nut supplied
Euro-style
QD Connector
14 mm (0.6")
15 mm (0.6")
Mini-style QD Connector
3
®
Lexan is a registered trademark of General Electric Co.
P/N 36578 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
5
Q45BB6 Series Sensors
Convergent Sensor Models
(CV and CV4)
Glass Fiber Optic Models
(F and FV)
Plastic Fiber Optic Models
(FP)
60.5 mm
(2.38")
61.7 mm
(2.43")
59.9 mm
(2.36")
Performance Curves
Opposed
Excess Gain
Beam Pattern
1000
Effective Beam: 13 mm
Q45E/R
Opposed Mode
E
X
C
E
S
S
Q45E/R
Opposed Mode
1.5 m
60 in
100
10
1.0 m
0.5 m
0
40 in
20 in
0
G
A
I
0.5 m
1.0 m
1.5 m
20 in
40 in
60 in
N
1
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
100 m
330 ft
0
12 m
40 ft
24 m
80 ft
36 m
120 ft
48 m
160 ft
60 m
200 ft
DISTANCE
DISTANCE
Retroreflective Non-Polarized
Excess Gain Beam Pattern
Retroreflective Polarized
Excess Gain Beam Pattern
1000
1000
Q45LP
Q45LV
E
X
C
E
S
S
E
X
C
E
S
S
Retroreflective Mode
Retroreflective Mode
100
10
Q45LV
Retroreflective Mode
Q45LP
Retroreflective
Mode
100
10
75 mm
3.0 in
75 mm
3.0 in
50 mm
25 mm
0
2.0 in
1.0 in
0
50 mm
25 mm
0
2.0 in
1.0 in
0
With BRT-3 Reflector
With BRT-3 Reflector
G
A
I
With BRT-3 Reflector
G
A
I
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
With BRT-3 Reflector
N
N
1
1
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
1.5 m
5 ft
3 m
10 ft
4.5 m
15 ft
6 m
20 ft
7.5 m
25 ft
0
3 m
10 ft
6 m
20 ft
9 m
30 ft
12 m
40 ft
15 m
50 ft
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Diffuse-mode performance curves are based on a 90% reflectance white test card.
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36578 Rev. E
Q45BB6 Series Sensors
Diffuse Short Range
Diffuse Long Range
Excess Gain
Beam Pattern
Excess Gain
Beam Pattern
1000
1000
100
10
Q45DL
Q45D
E
X
C
E
S
S
E
X
C
E
S
S
Diffuse Mode
Diffuse Mode
Q45DL
Diffuse Mode
100
10
15 mm
0.6 in
75 mm
3.0 in
Q45D
Diffuse Mode
10 mm
5 mm
0
0.4 in
0.2 in
0
50 mm
25 mm
0
2.0 in
1.0 in
0
G
A
I
G
A
I
5 mm
10 mm
15 mm
0.2 in
0.4 in
0.6 in
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
N
N
1
1
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
100 mm 200mm 300 mm 400 mm 500 mm
4.0 in 8.0 in 12.0 in 16.0 in 20.0 in
.01 m
.033 ft
.10 m
.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Diffuse High Power
Excess Gain
Beam Pattern
1000
100
10
Q45DX
E
X
C
E
S
S
Diffuse Mode
Q45DX
Diffuse Mode
75 mm
3.0 in
50 mm
25 mm
0
2.0 in
1.0 in
0
G
A
I
25 mm
50 mm
75 mm
1.0 in
2.0 in
3.0 in
N
1
0.01 m
0.033 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
0.6 m
2 ft
1.2 m
4 ft
1.8 m
6 ft
2.4 m
8 ft
3.0 m
10 ft
DISTANCE
DISTANCE
Convergent mode performance curves are based on a 90% reflectance white test card.
Convergent (CV and CVQ Models)
Excess Gain Beam Pattern
Convergent (CV4 and CV4Q Models)
Excess Gain
Beam Pattern
1000
100
10
1000
100
10
Q45CV
Q45CV4
Convergent Mode
E
X
C
E
S
S
E
X
C
E
S
S
Convergent Mode
Q45CV4
Q45CV
3.8 mm
0.15 in
3.8 mm
0.15 in
Convergent Mode
Convergent Mode
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
2.5 mm
1.2 mm
0
0.10 in
0.05 in
0
G
A
I
G
A
I
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
1.2 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
N
N
1
1
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
1 mm
.04 in
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
0
38 mm
1.5 in
75 mm 113 mm 150 mm 190 mm
3.0 in 4.5 in 6.0 in 7.5 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Glass fiber optic diffuse mode performance curves are based on a 90% reflectance white test card.
Glass Fiber Optic, Infrared (Opposed Mode) Glass Fiber Optic, Infrared (Diffuse Mode)
Excess Gain
Beam Pattern
Excess Gain
Beam Pattern
1000
100
10
1000
100
10
Q45F
Q45F
E
X
C
E
S
S
E
X
C
E
S
S
Opposed Mode
IT23S Fibers
Diffuse Mode
Q45F
Q45F
Diffuse Mode
150 mm
6.0 in
3.8 mm
0.15 in
Opposed Mode
100 mm
50 mm
0
4.0 in
2.0 in
0
2.5 mm
1.3 mm
0
0.10 in
0.05 in
0
IT23S Fibers
BT13S Fiber
BT23S Fiber
IT13S Fibers
BT23S Fiber
G
A
I
G
A
I
IT13S Fibers
50 mm
100 mm
150 mm
2.0 in
4.0 in
6.0 in
1.3 mm
2.5 mm
3.8 mm
0.05 in
0.10 in
0.15 in
BT13S Fiber
N
N
1
1
0.01 m
0.03 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
0
0.4 m
15 in
0.8 m
30 in
1.2 m
45 in
1.6 m
60 in
2.0 m
75 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
25 mm
1 in
50 mm
2 in
75 mm 100 mm 125 mm
3 in 4 in 5 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
P/N 36578 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
7
Q45BB6 Series Sensors
Glass Fiber Optic, Visible Red (Opposed Mode)
Glass Fiber Optic, Visible Red (Diffuse Mode)
Excess Gain
Beam Pattern
Excess Gain
Beam Pattern
1000
100
10
1000
100
10
Q45FV
Diffuse Mode
Q45FV
E
X
C
E
S
S
E
X
C
E
S
S
Opposed Mode
Q45FV
Opposed Mode
Q45FV
30 mm
1.2 in
3.0 mm
0.12 in
Diffuse Mode
20 mm
10 mm
0
0.8 in
0.4 in
0
IT23S Fibers
2.0 mm
1.0 mm
0
0.08 in
0.04 in
0
IT23S Fibers
BT13S Fiber
BT23S Fiber
G
A
I
G
A
I
10 mm
20 mm
30 mm
0.4 in
0.8 in
1.2 in
IT13S Fibers
BT13S
Fiber
IT13S Fibers
1.0 mm
2.0 mm
3.0 mm
0.04 in
0.08 in
0.12 in
BT23S Fiber
N
N
1
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0
100 mm 150 mm 200 mm 250 mm 300 mm
4 in 6 in 8 in 10 in 12 in
1.0 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
0
5 mm
0.2 in
10 mm
0.4 in
15 mm
0.6 in
20 mm 25 mm
0.8 in 1.0 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Plastic fiber optic Diffuse mode performance curves are based on a 90% reflectance white test card.
Plastic Fiber Optic (Opposed Mode) Plastic Fiber Optic (Diffuse Mode)
Excess Gain
Beam Pattern
Excess Gain
Beam Pattern
1000
100
10
1000
100
10
Q45FP
Q45FP
E
X
C
E
S
S
E
X
C
E
S
S
Opposed Mode
Diffuse Mode
PBT46U Fiber
Q45FP
45 mm
1.8 in
Q45FP
18 mm
0.75 in
Opposed Mode
PIT46U Fibers
Diffuse Mode
30 mm
15 mm
0
1.2 in
0.6 in
0
12 mm
6 mm
0
0.50 in
0.25 in
0
PBT46U Fiber
PIT46U Fibers
G
A
I
G
A
I
PIT26U Fibers
15 mm
30 mm
45 mm
0.6 in
1.2 in
1.8 in
6 mm
12 mm
18 mm
0.25 in
0.50 in
0.75 in
PIT26U Fibers
N
N
PBT26U Fiber
1
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4.0 in
1000 mm
40 in
0.1 mm
0.004 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
0
10 mm
0.4 in
20 mm
0.8 in
30 mm
1.2 in
40 mm 50 mm
1.6 in 2.0 in
0
25 mm
1.0 in
50 mm
2.0 in
75 mm 100 mm 125 mm
3.0 in 4.0 in 5.0 in
DISTANCE
DISTANCE
DISTANCE
DISTANCE
Accessories
Corsets
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
2
3
1
4
44 Typ.
Straight
M12 x 1
ø 14.5
1 = Brown
2 = White
3 = Blue
MQDC-450
15.2 m (50 ft)
4 = Black
4-Pin Mini-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MBCC-406
1.83 m (6 ft)
3.66 m (12 ft)
4
3
2
1
MBCC-412
52 Typ.
7/8-16UN-2B
ø 25.5
Straight
1 = Brown
2 = White
3 = Blue
MBCC-430
9.14 m (30 ft)
4 = Black
8
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 36578 Rev. E
Q45BB6 Series Sensors
Retroreflective Targets
Banner offers a wide selection of high-quality retroreflective targets. See
www.bannerengineering.com for complete information.
NOTE: Polarized sensors require corner cube type
retroreflective targets. Non-polarized sensors may use
any retroreflective target.
Brackets
SMB30C
56
SMB30MM
•
30 mm split clamp, black
PBT bracket
•
12-ga. stainless steel bracket
57
70
A
B
with curved mounting slots
for versatile orientation
66
13
•
•
Stainless steel mounting
hardware included
C
57
•
•
Clearance for M6 (¼ in)
hardware
B
Mounting hole for 30 mm
sensor
A
Mounting hole for 30 mm
sensor
Hole center spacing: A=ø 45
Hole size: B=ø 27.2
Hole center spacing: A = 51, A to B = 25.4
Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1
SMB30SC
67
•
•
•
Swivel bracket with 30 mm
mounting hole for sensor
B
58
Black reinforced
thermoplastic polyester
Stainless steel mounting and
swivel locking hardware
included
29
A
Hole center spacing: A=ø 50.8
Hole size: A=ø 7.0, B=ø 30.0
Output Timing Logic and Signal Strength Display Modules
Q45 sensors easily accept the addition of output timing logic and signal strength display functions. Display modules have a
™
seven-element display that gives a more precise indication of excess gain than does the AID system LED that is standard
on Q45 sensors. The modules listed below may be used with all Q45BB6 sensors. Refer to the module's datasheet for more
information.
Models
45LM58
45LM58D
45LMD
Logic and/or Display Function
Programmable output timing logic
Programmable output timing logic plus signal strength display
Signal strength display only (no timing function)
P/N 36578 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
9
Q45BB6 Series Sensors
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection
applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval
by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product
specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most
recent version of any documentation, refer to: www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
Q45BB6DLQ5 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
Q45BB6DQ | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6DQ5 | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6DX | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6DXQ | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6DXQ5 | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6F | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6FP | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6FPQ | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6FPQ5 | BANNER | Q45BB6 Series Sensors | 获取价格 | |
Q45BB6FQ | BANNER | Q45BB6 Series Sensors | 获取价格 |
Q45BB6DLQ5 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6