QL56M6XD30BQ [BANNER]
QL56 Series Luminescence Sensor;
| 型号： | QL56M6XD30BQ |
| 厂家： | 
Banner Engineering |
| 描述： | QL56 Series Luminescence Sensor |
| 文件： | 总5页 (文件大小：1822K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
QL56 Series Luminescence Sensor
Datasheet
High-performance Luminescence Sensor
To view or download the latest technical information about this product, including specifications, dimensions, accessories,
and wiring, see http://www.bannerengineering.com.
•
•
Senses luminescent marks, even on luminescent backgrounds and irregular or
reflective surfaces
High-power UV emission and a line of structured light provide a uniform and
consistent beam for improved sensitivity
•
•
•
•
•
•
Fast switching frequency and response time
Push button programming for easy setup and clear bargraph indicator
Choice of operating distance depending on model
Durable, compact aluminum housing
Bipolar (1 NPN and 1 PNP) output, plus 0.75 to 5.5V dc analog output
5-position swivel QD connector
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Model
Operating Distance Sensor Performance
Cable / Connector
Outputs
120%
100%
80%
60%
10 to 20 mm (0.39 in
QL56M6XD15BQ
40%
to 0.79 in)
20%
0%
5 mm
15 mm
25 mm
35 mm
Sensing Distance
60%
50%
40%
30%
20%
10%
0%
Integral 5-pin M12/
Euro-style male
quick disconnect
(QD)
One NPN and PNP
discrete plus one
0.75 to 5.5 V dc
analog
20 to 40 mm (0.79 in
to 1.57 in)
QL56M6XD30BQ
5 mm 15 mm 25 mm 35 mm 45 mm 55 mm
Sensing Distance
40%
35%
30%
25%
0%
30 to 50 mm (1.18 in
to 1.97 in)
QL56M6XD40BQ
20 mm 25 mm 30 mm 35 mm 40 mm 45 mm 50 mm 55 mm 60 mm
Sensing Distance
Original Document
142396 Rev. D
28 September 2015
142396
QL56 Series Luminescence Sensor
Overview
The QL56 Series Luminescence Sensor is an easy-to-use, extremely
sensitive luminescence sensor that emits ultraviolet (UV) light from high-
power LEDs and detects visible light created by luminescent targets. This
technology allows for the detection of luminescent marks (even invisible
ones) on any surface, independently from its material, color, or distance
inside the operating range, as long as the target radiates visible light when
illuminated with UV light.
Green Orange
Ready Delay
LED
LED
Yellow
Output
LED
Orange
Keylock
LED
Applications
Set Keylock
and Delay
Push Button
Bargraph
Indicators
The QL56 can be used to error-proof manufacturing lines and verify the
presence of glues, lubricants, tamper-proof labels, inks, paint, or the
inspector’s UV mark. There are many applications where the unique
property of luminescence can be used to verify that a chemical or adhesive
was applied, to inspect for leaks on a seal, or to ensure a critical
manufacturing step was completed.
Sensitivity Adjustment
Push Buttons
Many materials exhibit luminescence naturally or can be enhanced to
include luminescence dyes (also known as luminophores). For example,
white bond paper exhibits luminescence under the UV light without any
additional treatment. Or a corrosion prevention treatment may be
enhanced to include a luminescence dye so that its application can be
verified later.
Figure 1. Features
The Advantage of the QL56
The QL56 sensor uses six UV LEDs which create a uniform and intense line of UV light. The structured light allows for
reliable detection of luminescence marks on irregular or textured surfaces such as wood, textile, or cast surfaces. The
sensor’s durable aluminum housing ensures years of use in challenging environments. Most applications can be
addressed with the bi-polar discrete outputs, but an analog output signal is available to make subtle pass or fail decisions
if greater contrast resolution is required.
Sensor Configuration
General Notes on Configuration
•
The sensor's KEYLOCK function deactivates the push buttons to
avoid accidental sensor setting. The push buttons are locked at
sensor power-up (KEYLOCK LED OFF). To enable the push
buttons, press and hold the SET push button for 5 seconds; there
is a 2 minute timeout for the keylock.
Sensor
Output
•
•
The DELAY SETTING extends the minimum active output status
duration to 20 ms, allowing slower interface systems to detect
shorter pulses.
The analog output supplies a voltage proportional to the signal
received by the sensor. The voltage supplied is 0.75 to 5.5 V.
Output
Starts
OFF-Delay (20 ms)
Output Ends
Figure 2. OFF-delay: output continues for 20 ms
after sensing stops
Procedure
Result
Keylock LED: ON
Keylock Setting
Press and hold SET push button for 5
seconds (the keyboard will
automatically re-lock if inactive for 2
minutes)
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 142396 Rev. D
QL56 Series Luminescence Sensor
Procedure
Result
Sensitivity
Setting
Click the "+" and "-" push buttons to
increase or decrease the sensitivity
level. Hold for fast adjustment.
Sensitivity Setting
communicated by bar graph
indicator
Delay Setting
Press and hold the SET push button
for 2 seconds to toggle off-delay
DELAY LED: ON indicating
20 ms off-delay is active
Installation
The sensor can be mounted using the Ø3.5 mm housing holes or the threaded M5 holes with 6 mm max. depth. (Warning:
the use of excessively long screws can damage the product) The connector can be oriented at five different positions by
rotating the block. The position chosen is held by a mechanical blocking system. The rotation can be carried out after
sensor installation as the connector block is completely self contained inside the housing.
Specifications
Supply Voltage and Current
Supply Protection Circuitry
15 to 30 V dc (2 Vpp maximum ripple); 50 mA maximum at 24 V dc
(excluding output current)
Protected against reverse polarity
Ambient Light Rejection
Sensing Beam
According to EN 60947-5-2
LED UV, 375 nm; class 1
Minimum Spot Dimension
Sensing Range
2 × 8 mm at 10 mm (QL56M6XD15BQ)
3 × 11 mm at 24 mm (QL56M6XD30BQ)
4 × 15 mm at 50 mm (QL56M6XD40BQ)
QL56M6XD15BQ: 10 to 20 mm (0.39 to 0.79 inches)
QL56M6XD30BQ: 20 to 40 mm (0.79 to 1.57 inches)
QL56M6XD40BQ: 30 to 50 mm (1.18 to 1.97 inches)
Analog Output
Construction
0.75 to 5.5 V dc maximum
Aluminum housing, glass lens; mass 180 g maximum
Analog Output Impedance
Adjustments
2.2 kΩ (short-circuit protection)
"+" and "-" push buttons determine sensitivity
"Set" push button activates delay and keylock function (see Overview
on page 2)
Delay
0 ms (default) or 20 ms user selectable
Connections
Output Protection Circuitry
Integral 5-pin M12/Euro-style male quick disconnect (QD)
Overload and short circuit protection
Indicators
Output Configuration
Yellow OUTPUT LED: ON indicates output conducting
Green READY LED: ON indicates power on; Flashing indicates output
overload
Orange DELAY LED: ON indicates 20 ms delay activated
Orange KEYLOCK LED: ON indicates push buttons are unlocked
5-segment bar graph: Indicates sensitivity
Bipolar (1 NPN and 1 PNP), plus 0.75 to 5.5 V dc analog output
Output Rating
100 mA maximum
Output Response Time
250 µs
Switching Frequency
Output Saturation Voltage
2 kHz
≤ 2 V
Shock Resistance
Environmental Rating
30 G; 6 shocks per axis; 11 ms duration (EN60068-2-27)
IEC IP67
Vibration
Application Notes
Vibration 10 to 55 Hz 0.5 mm p-p amplitude per IEC60068-2-6
The lens must be used in the lower position, and the cap must remain
in place on the end position
Operating Conditions
Certification
Temperature: −10 °C to +55 °C (+14 °F to +131 °F)
Storage Temperature: −20 °C to +70 °C (−4 °F to +158 °F)
P/N 142396 Rev. D
www.bannerengineering.com - Tel: +1-763-544-3164
3
QL56 Series Luminescence Sensor
Dimensions
39.1 mm
1.54"
28 mm
1.1"
15.5 mm
0.61"
33.0 [1.30"]
M18X0.75
Model QL56M6XD40BQ8
Replacement Lens: UC-QL5550
M12x1
44.7 mm
1.76"
21.5 [0.85"]
60.7 mm
2.39"
25.4 [1.00"]
24 mm
40 mm
28.0 [1.10"]
M18X0.75
Model QL56M6XD30BQ8
Replacement Lens: UC-QL5530
4 mm
0.2"
M5 depth 6 mm
3.5 mm passing holes
28.0 [1.10"]
31.5 [1.24"]
7.4 mm
28 mm
1.1"
27.5 mm
1.08"
15.8 mm
0.62"
M5 depth 6 mm
5 mm 0.2"
25.0 [0.99"]
M18X0.75
Model QL56M6XD15BQ8
Replacement Lens: UC-QL5515
31.9 mm
1.26"
21 mm
0.83”
4.8 [0.19"]
8.5 [0.33"]
62.9 mm
2.48"
79 mm
3.1"
2 mm
0.1"
Wiring Diagram
Wiring Key:
1 = Brown
2 = White
3 = Blue
4 = Black
5 = Gray
1
3
2
4
+
15 - 30V dc
–
Load
Load
5
0.75 - 5.5V dc
Accessories
5-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC1-501.5
MQDC1-506
MQDC1-515
0.50 m (1.5 ft)
1.83 m (6 ft)
4.57 m (15 ft)
2
1
4
44 Typ.
3
5
Straight
1 = Brown
2 = White
3 = Blue
M12 x 1
ø 14.5
MQDC1-530
9.14 m (30 ft)
4 = Black
5 = Gray
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 142396 Rev. D
QL56 Series Luminescence Sensor
Brackets
SMB55A
SMB55F
•
•
15° offset bracket
12-gauge stainless steel
•
•
Flat-mount bracket
12-gauge stainless steel
SMB55RA
SMB55S
•
•
Right-angle bracket
12-gauge stainless steel
•
•
15° offset bracket
12-gauge stainless steel
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号：
©2020 ICPDF网 联系我们和版权申明