QMT42VP6DX [BANNER]
QMT42 Series Long-Range Diffuse Sensors;型号: | QMT42VP6DX |
厂家: | Banner Engineering |
描述: | QMT42 Series Long-Range Diffuse Sensors |
文件: | 总4页 (文件大小:827K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
QMT42 Series Long-Range Diffuse Sensors
Datasheet
Adjustable sensing distance up to 6 meters (20 inches)
•
Powerful, collimated infrared light source and special lensing for reliable long-range
detection of even the darkest objects
•
•
•
•
•
Low-cost, compact, rugged sensors in metal die-cast housings
Leakproof IP67 (NEMA 6) construction for reliable sensing in harsh environments
Outstanding electrical noise immunity
Dual LED system indicates sensor performance
Choice of unterminated cable or quick-disconnect connector
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Models
Range
Cable
Supply Voltage
Output Type
QMT42VN6DX
QMT42VN6DXQ
QMT42VP6DX
QMT42VP6DXQ
2 m (6.5 ft)
4-pin Euro QD
2 m (6.5 ft)
4-pin Euro QD
NPN
10 mm (0.4 in) to 6 m
(20 ft)
10 V dc to 30 V dc
PNP
Wiring
Sensors with NPN Outputs
Sensors with PNP Outputs
Cabled Models
Quick-Disconnect Models
Cabled Models
Quick-Disconnect Models
bu
bn
bk
wh
bn
bu
bk
wh
bu
bn
bk
wh
bn
-
+
10-30V dc
-
+
-
10-30V dc
+
10-30V dc
10-30V dc
bu
bk
wh
+
-
Load
Load
Load
Load
Load
Load
Load
Load
Original Document
57890 Rev. A
19 May 2016
57890
QMT42 Series Long-Range Diffuse Sensors
Specifications
Sensing Beam
Adjustments
Infrared, 880 nm
4-turn slotted Gain (sensitivity) adjustment potentiometer
(clutched at both ends of travel)
Supply Voltage and Current
Range
10 mm (0.4 in) to 6 m (20 ft)
Indicators
10 to 30 V dc (10% max. ripple) at less than 40 mA
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Two LEDs: Green and Amber
Output Configuration
Green on steady = power to sensor is ON
Green flashing = output is overloaded
Amber on steady = light is sensed; normally open output ON
Amber flashing = marginal excess gain (1-1.5x) in light
condition
SPDT (complementary) solid-state dc switch; choose NPN or
PNP models
Light operate: N.O. output conducts when the sensor sees its
own modulated light
Dark operate: N.C. output conducts when the sensor sees dark
Construction
Output Rating
Housings are die-cast zinc alloy with black acrylic polyurethane
finish; lenses are acrylic
100 mA maximum (each output)
OFF-state leakage current: < 5 microamps at 30 V dc
ON-state saturation voltage: < 1 V at 10 mA dc; < 1.5 V at
100 mA dc
Environmental Rating
IEC IP67
NEMA 6
Output Protection Circuitry
Protected against false pulse on power-up and continuous
overload or short-circuit of outputs
Overload trip point ≥ 130 mA, typical, at 20 ºC
Connections
2 m (6.5 ft) or 9 m (30 ft) attached cable, or 4-pin M12/Euro-
style quick-disconnect fitting; cables for QD models are
purchased separately
Output Response Time
1 millisecond on and off
Operating Conditions
−20 °C to +55 °C (−4 °F to +131°F)
90% at +50 °C maximum relative humidity (non-condensing)
NOTE: 100 millisecond delay on
power-up; outputs are non-conducting
during this time
Certification
Repeatability of Response
250 microseconds
Sensing Hysteresis
Less than 20% of set sensing distance
Performance
The performance is based on a 90% reflective white test card.
1000
QMT42DX
Diffuse Mode
QMT42DX
Diffuse Mode
30 mm
20 mm
10 mm
0
1.2 in
0.8 in
0.4 in
0
100
10 mm
20 mm
30 mm
0.4 in
0.8 in
1.2 in
10
0
1.5 m
5 ft
3.0 m
10 ft
4.5 m
15 ft
6.0 m
20 ft
7.5 m
25 ft
1
0.01 m
0.033 ft
0.1 m
0.33 ft
1.0 m
3.3 ft
10 m
33 ft
DISTANCE
DISTANCE
Figure 1. Excess Gain
Figure 2. Beam Pattern
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 57890 Rev. A
QMT42 Series Long-Range Diffuse Sensors
Dimensions
18.0 mm
(0.71")
Green LED Power/Overload Indicator
Yellow LED
19.2 mm
(0.76")
Output/Marginal Indicator
ø 3.2 mm
(0.125")
(4 Holes)
Sensitivity
Control
58.0 mm
(2.28")
2 x 3.1mm
(0.12")
10.0 mm (0.39")
12.3 mm (0.48")
2 x 3.1mm
(0.12")
76.2 mm
(3.00")
23.9 mm (2)
(0.94")
M12 x 1 x 18 mm
Euro-style
27.1 mm (2)
(1.07")
42.0 mm
(1.65")
Threaded M4 x 0.7
Mounting Holes
Figure 3. Cabled Models
Figure 4. Quick-Disconnect Models
Figure 5. Sensitivity Control
All measurements are listed in millimeters (inches), unless noted otherwise.
Accessories
Quick-Disconnect (QD) Cables
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
Mounting Brackets
SMB42T
SMB42L
•
Stainless steel 2-axis
side-mounting bracket
•
•
13-ga. stainless steel
Hardware included
B
•
Nut strap included for
replacing two M3
mounting nuts
C
B
A
A
Hole center spacing: A = 20.3, B to C = 24.1
Hole size: A = ø 4.3 × 20°, B = ø 3.0, C = ø 3.0 × 30°
Hole center spacing: A = 10.0, B = 25.4
Hole size: A = ø 3.4, B = ø 2.5
P/N 57890 Rev. A
www.bannerengineering.com - Tel: +1-763-544-3164
3
QMT42 Series Long-Range Diffuse Sensors
SMB42F
SMB42U
B
B
•
•
13-ga. stainless steel
Hardware included
•
•
13-ga. stainless steel
Hardware included
B
B
A
A
Hole center spacing: A = 10.0, B = 25.4
Hole size: A = ø 3.4, B = ø 2.5
Hole center spacing: A = 30.0, B = 25.4
Hole size: A = ø 3.4, B = ø 2.5
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
Copyright Notice
Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not
intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product
warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any
©
time. For the most recent version of any documentation, refer to: www.bannerengineering.com.
Banner Engineering Corp. All rights reserved.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号:
©2020 ICPDF网 联系我们和版权申明