SLM30P6Q [BANNER]

SLM Series Slot Sensors;


型号：	SLM30P6Q
厂家：	Banner Engineering
描述：	SLM Series Slot Sensors
文件：	总6页 (文件大小：543K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SLM Series Slot Sensors

Datasheet

•

An easy-to-use, self-contained, opposed-mode sensor pair in a U-shaped housing

Rugged, sealed, die-cast metal housing is rated IEC IP67 (NEMA 6)

Easy and economical to mount; molded-in beam guides simplify beam placement

Eight slot widths from 10 mm to 220 mm for a wide variety of sensing applicaꢀons

Current sourcing (PNP), current sinking (NPN), or bipolar (one NPN and one PNP)

output, depending on model

•

Fast 500-microsecond response ꢀme

10 V dc to 30 V dc supply voltage

Single-turn potenꢀometer sensiꢀvity adjustment

Visible red beam

Selectable Light Operate (L.O.) or Dark Operate (D.O.) with sealed switch

WARNING: Not To Be Used for Personnel Protecꢀon

Never use this device as a sensing device for personnel protecꢀon. Doing so could lead to serious injury or death.

This device does not include the self-checking redundant circuitry necessary to allow its use in personnel safety

applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or de-energized sensor output

condiꢀon.

Models

QD Models

SLM10P6Q

SLM10N6Q

SLM20P6Q

SLM20N6Q

SLM30P6Q

SLM30N6Q

SLM50P6Q

SLM50N6Q

SLM80P6Q

SLM80N6Q

Slot Width

Output Type

PNP

Cabled Models

SLM10B6

Slot Width

Output Type

10 mm (0.39 in)

20 mm (0.79 in)

30 mm (1.18 in)

50 mm (1.97 in)

80 mm (3.15 in)

120 mm (4.72 in)

180 mm (7.09 in)

220 mm (8.66 in)

10 mm (0.39 in)

NPN

PNP

SLM20B6

SLM30B6

20 mm (0.79 in)

30 mm (1.18 in)

50 mm (1.97 in)

80 mm (3.15 in)

120 mm (4.72 in)

180 mm (7.09 in)

220 mm (8.66 in)

NPN

PNP

SLM50B6

Bipolar (one NPN and

one PNP)

SLM80B6

NPN

PNP

SLM120B6

SLM180B6

SLM220B6

NPN

PNP

NPN

PNP

SLM120P6Q

SLM120N6Q

SLM180P6Q

SLM180N6Q

SLM220P6Q

SLM220N6Q

NPN

PNP

NPN

PNP

NPN

Integral 3-pin M8/Pico-style quick disconnect models are listed. Models with a quick disconnect require a maꢀng cordset.

Integral 2 m (6.5 ꢁ) unterminated cable models are listed.

•

To order the 9 m (30 ꢁ) PVC cable model, add the suﬃx "W/30" to the cabled model number. For example, SLM10B6 W/30.

To order the 150 mm (6 in) PUR cable model with a 4-pin M12/Euro-style quick disconnect, add the suﬃx "QPMA" to the model number. For

example, SLM10B6QPMA.

•

Models with a quick disconnect require a maꢀng cordset.

Original Document

122703 Rev. G

3 April 2017

122703

SLM Series Slot Sensors

Overview

The SLM Series Slot Sensor (someꢀmes called a “fork sensor”) comprises an opposed-mode emiꢂer and its receiver inside a single

convenient housing.

Opposed-mode sensing is very reliable, and the single, self-contained housing provides easy installaꢀon, with no sensor alignment

required. In addiꢀon, molded-in arrows on the housing show at a glance the posiꢀon of the beam, simplifying installaꢀon placement.

Applicaꢀons include counꢀng, gear tooth detecꢀon, edge detecꢀon, part sensing on conveyor rails and belts, posiꢀon and orientaꢀon

veriꢃcaꢀon, dimension veriꢃcaꢀon, tool break monitoring, and level monitoring.

1. Output LED (amber)

2. Power on LED (green)

3. Dark/Light Operate select switch

4. Sensiꢀvity potenꢀometer

5. Receiver aperture

6. Emiꢂer aperture

7 (x2)

7. Beam posiꢀon arrows

8. Mounꢀng hole (all models except SLM10 and SLM20)

9. Mounꢀng holes (all models)

Wiring Diagrams

NPN

PNP

Bipolar

Key

1. Brown

2. White

3. Blue

10–30 V dc

–

10–30 V dc

–

4. Black

10–30 V dc

Load

Conﬁguring the Sensor

For the best results, place the objects to be detected midway between the emiꢂer and receiver.

Adjusꢀng the Sensiꢀvity

Adjust the sensor’s sensiꢀvity by turning the 270-degree-turn Sensiꢀvity potenꢀometer with a small ﬂat-blade screwdriver.

Apply power to the sensor and turn the potenꢀometer all the way clockwise (maximum gain). If the object to be sensed does not block

the beam at the maximum gain, turn the gain down a liꢂle at a ꢀme, tesꢀng with the object, unꢀl the object can be sensed reliably.

If adjusꢀng the sensiꢀvity with the potenꢀometer does not provide reliable object detecꢀon, invesꢀgate alternaꢀve sensing methods.

Selecꢀng Light or Dark Operate

Select dark operate (D.O.) or light operate (L.O.) by turning the DO/LO selector switch to the desired seꢄng using a small ﬂat-blade

screwdriver.

If dark operate is selected, the output conducts when the receiver element does not see the emiꢂed light (object is present). If light

operate is selected, the output conducts when the receiver element sees the emiꢂed light (object is absent).

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 122703 Rev. G

SLM Series Slot Sensors

Speciﬁcaꢀons

Supply Voltage and Current

Construcꢀon

10 V dc to 30 V dc (10% max. ripple) at less than 25 mA, exclusive of load

Housing: die-cast zinc with nickel plaꢀng

Endcaps: ABS

Supply Protecꢀon Circuitry

Opꢀc windows: acrylic

Protected against reverse polarity and transient voltages

Connecꢀons

Output Conﬁguraꢀon

Cabled models: 2 m (6.5 ꢁ) or 9 m (30 ꢁ) 4-conductor, PVC-jacketed cable

Cabled and Euro-style QD models: Bipolar: One current sourcing (PNP) and one

Pico-style QD models: 3-pin, threaded integral QD connector

current sinking (NPN)

Euro-style QD models: 150 mm (6 in) PUR cable with 4-pin, threaded connector

Pico-style QD models: Current sourcing (PNP) or current sinking (NPN),

depending on model

Environmental Raꢀng

IEC IP67; NEMA 6

Output Raꢀng

100 mA with short circuit protecꢀon

OFF-state leakage current:

NPN: < 200 µA

PNP: < 10 μA

ON-state saturaꢀon voltage:

NPN: 1.6 V at 100 mA

Required Overcurrent Protecꢀon

WARNING: Electrical connecꢀons must be made

by qualiꢃed personnel in accordance with local

and naꢀonal electrical codes and regulaꢀons.

Overcurrent protecꢀon is required to be provided by end product applicaꢀon

per the supplied table.

PNP: 2.0 V at 100 mA

Overcurrent protecꢀon may be provided with external fusing or via Current

Limiꢀng, Class 2 Power Supply.

Output Protecꢀon Circuitry

Protected against output short-circuit and false pulse on power up

100 ms max. delay at power up; outputs do not conduct during this ꢀme

Supply wiring leads < 24 AWG shall not be spliced.

For addiꢀonal product support, go to www.bannerengineering.com.

Output Response Time

Supply Wiring (AWG)

Required Overcurrent Protecꢀon (Amps)

500 microseconds

Repeatability

5.0

3.0

2.0

1.0

0.8

0.5

95 microseconds

Operaꢀng Condiꢀons

−20 °C to +60 °C (−4 °F to +140 °F)

95% at +55 °C maximum relaꢀve humidity (non-condensing)

Slot Opening

10 mm, 20 mm, 30 mm, 50 mm, 80 mm, 120 mm, 180 mm, or 220 mm

(depending on model); beam is 5 mm (0.2 in) from outer edge

Adjustments

1-turn potenꢀometer sensiꢀvity adjustment

Light/dark operate selecꢀon switch

Cerꢀﬁcaꢀons

Indicators

Two LED Indicators: Power (green) and Output (amber)

E224071

Green on: Power on

Green ﬂashing: Sensor short circuit

Amber on: Output is acꢀvated

SLM10

SLM20

SLM30

SLM50

SLM80

SLM120

SLM180

SLM220

Minimum object detecꢀon at

maximum gain

1.00 mm

(0.040 in)

1.25 mm

(0.050 in)

1.50 mm

(0.060 in)

1.65 mm

(0.065 in)

1.80 mm

(0.070 in)

1.80 mm

(0.070 in)

1.80 mm

(0.070 in)

2.40 mm

(0.095 in)

Minimum object detecꢀon at 2

ꢀmes excess gain

0.30 mm

(0.012 in)

0.30 mm

(0.012 in)

0.40 mm

(0.016 in)

0.60 mm

(0.024 in)

0.75 mm

(0.030 in)

0.90 mm

(0.035 in)

0.90 mm

(0.035 in)

1.00 mm

(0.039 in)

0.10 mm

(0.004 in)

0.10 mm

(0.004 in)

0.10 mm

(0.004 in)

0.10 mm

(0.004 in)

0.20 mm

(0.008 in)

0.20 mm

(0.008 in)

0.20 mm

(0.008 in)

0.20 mm

(0.008 in)

Hysteresis

0.02 mm

(0.001 in)

0.02 mm

(0.001 in)

0.02 mm

(0.001 in)

0.04 mm

(0.002 in)

0.06 mm

(0.002 in)

0.08 mm

(0.003 in)

0.08 mm

(0.003 in)

0.08 mm

(0.003 in)

Repeatability

The smallest diameter rod that can be detected when passed slowly through sensing beam. Minimum object detecꢀon is measured midway between the emiꢂer

and receiver. For best results, place the object to be detected in the midway posiꢀon when possible. The minimum object detecꢀon size may increase if the

object is very close to the receiver side.

The distance an object must move to toggle between output OFF and output ON state.

The variaꢀon in switching distance for a standard target at controlled sensing condiꢀons.

P/N 122703 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

SLM Series Slot Sensors

Dimensions

5.0

[0.20"]

Models

Cabled

Models

Overall Width

Slot Width

24.6

[0.97"]

34.9

[1.37"]

14.1

[0.56"]

Slot

Depth

Overall

Depth

5.0

[0.20"]

9.0

[0.35"]

16.5

[0.65"]

3X Ø 4.5

[Ø 0.18"]

4.0 [0.16"]

1.0

[0.04"]

8.0 [0.31"]

20.0 [0.79"]*

12.0

[0.47"]

5.0

[0.20"]

2X 15.0

[0.59"]

4X M4 x 0.7 mm threads - 6.5 mm deep

Hardware: 2X M4 x 25 socket head cap screws

2X M4 nuts with captured lock washers

Hex key

6.0

[0.24"]

Max. torque 2.8 Nm (25 in-lbs)

*Model SLM10.. measures 18.0 [0.71"]

All measurements are listed in millimeters [inches], unless noted otherwise.

Models

Slot Width

Slot Depth

Overall Width

Overall Depth

Side Mount

Back Mount

SLM10

SLM20

SLM30

SLM50

SLM80

SLM120

SLM180

SLM220

10 mm (0.39")

20 mm (0.79")

30 mm (1.18")

50 mm (1.97")

80 mm (3.15")

120 mm (4.72")

180 mm (7.09")

220 mm (8.66")

42 mm (1.65")

52 mm (2.05")

62 mm (2.44")

82 mm (3.23")

112 mm (4.41")

152 mm (5.98")

212 mm (8.35")

252 mm (9.92")

n/a

60.8 mm

(2.39")

70 mm

(2.76")

80 mm (3.15") 10 mm (0.39")

30 mm (1.18")

33.5 mm (1.32")

48.5 mm (1.91")

46 mm (1.81")

56 mm (2.20")

66 mm (2.60")

15 mm (0.59")

60 mm (2.36")

100 mm (3.94")

30 mm (1.18")

70 mm (2.76")

90 mm (3.54")

120.7 mm

(4.75")

140 mm

130 mm

(5.12")

160 mm (6.30")

(5.51")

200 mm (7.87")

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 122703 Rev. G

SLM Series Slot Sensors

Accessories

3-Pin Threaded M8/Pico-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

PKG3M-2

PKG3M-5

PKG3M-7

PKG3M-9

PKG3M-10

PKW3M-2

PKW3M-5

2 m (6.56 ꢁ)

5 m (16.40 ꢁ)

7 m (22.97 ꢁ)

9 m (29.53 ꢁ)

10 m (32.81 ꢁ)

2 m (6.56 ꢁ)

35 Typ.

Straight

ø 9.5

M8 x 1

28 Typ.

1 = Brown

3 = Blue

5 m (16.40 ꢁ)

4 = Black

20 Typ.

Right-Angle

PKW3M-9

9 m (29.53 ꢁ)

M8 x 1

ø 9.5

3-Pin Snap/Pico-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

ø 10 mm max.

(0.4")

PKG3Z-2

2 m (6.56 ꢁ)

Straight

28 mm max.

(1.1")

25 mm max.

(1.0")

1 = Brown

3 = Blue

4 = Black

20 mm

(0.8")

PKW3-2

2 m (6.56 ꢁ)

Right-Angle

ø 12 mm max.

(0.5")

4-Pin Threaded M12/Euro-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406

MQDC-415

MQDC-430

1.83 m (6 ꢁ)

4.57 m (15 ꢁ)

9.14 m (30 ꢁ)

44 Typ.

Straight

M12 x 1

ø 14.5

MQDC-450

15.2 m (50 ꢁ)

MQDC-406RA

MQDC-415RA

MQDC-430RA

1.83 m (6 ꢁ)

4.57 m (15 ꢁ)

9.14 m (30 ꢁ)

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

30 Typ.

[1.18"]

Right-Angle

4 = Black

MQDC-450RA

15.2 m (50 ꢁ)

M12 x 1

ø 14.5 [0.57"]

P/N 122703 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

SLM Series Slot Sensors

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover

damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY

OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT

DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the

product is idenꢀꢃed as not intended for such purposes will void the product warranty. Any modiꢃcaꢀons to this product without prior express approval by Banner Engineering Corp will void the

product warranꢀes. All speciꢃcaꢀons published in this document are subject to change; Banner reserves the right to modify product speciꢃcaꢀons or update documentaꢀon at any ꢀme.

Speciꢃcaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:

www.bannerengineering.com.

SLM30P6Q [BANNER]

相关型号：

UL1042

ZXFV201

ZXFV201N14

ZXFV201N14TA

ZXFV201N14TC

ZXFV202E5

ZXFV202N8

ZXFV203N14

ZXFV301N16(1)

ZXFV302N16

ZXFV4089

ZXFV4089N8