SMB18FAM10 [BANNER]
M18-4 Stainless Steel 18 mm Barrel Sensor;型号: | SMB18FAM10 |
厂家: | Banner Engineering |
描述: | M18-4 Stainless Steel 18 mm Barrel Sensor |
文件: | 总10页 (文件大小:1076K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
M18-4 Stainless Steel 18 mm Barrel
Sensors
Datasheet
Next Generation of Self-Contained DC-Operated Sensors
•
Complete family of sensors, all housed in the popular 18 mm threaded metal
barrel
•
•
•
•
•
•
Chemically robust stainless steel sensors for wash-down applications
Powerful and bright visible red emitter beam for easy alignment and set-up
Highly visible output and dual-function power and stability indicators
Advanced ASIC technology is resistant to optical and electrical noise source
Wide operating temperature range: −40 °C to +70 °C (−40 °F to +158 °F)
Robust 250° adjustment potentiometer on select models
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
1
Emitter/Receiver Models
Model Number
M18-4NAEL-2M
M18-4NAEJ-2M
M18-4NAES-2M
M18-4VNRL-2M
M18-4VPRL-2M
M18-4VNRS-2M
M18-4VPRS-2M
Range
Output
25 m (82 ft)
Emitter
25 m (82 ft) with beam inhibit
25 m (82 ft) with adjustment
None
Complementary NPN
Complementary PNP
Complementary NPN
Complementary PNP
25 m (82 ft)
Receiver
25 m (82 ft) with adjustment
1
Polarized Retroreflective Models
Model Number
M18-4VNLP-2M
M18-4VPLP-2M
M18-4VNLPC-2M
M18-4VPLPC-2M
Range
Output
Complementary NPN
6 m (19.7 ft) with BRT-84 reflector
Complementary PNP
Complementary NPN
Complementary PNP
6 m (19.7 ft) with BRT-84 reflector, with adjustment
1
Retroreflective Models
Model Number
M18-4VNLV-2M
M18-4VPLV-2M
Range
Output
Complementary NPN
Complementary PNP
7.5 m (24.6 ft) with BRT-84 reflector, with
adjustment
1
Standard 2 m (6.5 ft) cable models are listed.
•
•
To order the 4-pin M12/Euro-style integral quick disconnect model, add the suffix "Q8". For example, M18-4VNDL-Q8.
To order the 150 mm (6 in) cable with a 4-pin M12/Euro-style quick disconnect model, add the suffix "Q5". For example, M18-4VNDL-
Q5.
Original Document
188320 Rev. E
13 July 2016
188320
M18-4 Stainless Steel 18 mm Barrel Sensors
1
Diffuse Models
Range
Model Number
M18-4VNDL-2M
M18-4VPDL-2M
M18-4VNDS-2M
M18-4VPDS-2M
Output
Complementary NPN
Complementary PNP
Complementary NPN
Complementary PNP
750 mm (29.5 in) with adjustment
300 mm (11.8 in) with adjustment
1
Fixed-Field Models
Model Number
Range
Output
M18-4VNFF30-2M
M18-4VPFF30-2M
M18-4VNFF50-2M
M18-4VPFF50-2M
M18-4VNFF75-2M
M18-4VPFF75-2M
M18-4VNFF100-2M
M18-4VPFF100-2M
M18-4VNFF150-2M
M18-4VPFF150-2M
M18-4VNFF200-2M
M18-4VPFF200-2M
Complementary NPN
Complementary PNP
Complementary NPN
Complementary PNP
Complementary NPN
Complementary PNP
Complementary NPN
Complementary PNP
Complementary NPN
Complementary PNP
Complementary NPN
Complementary PNP
30 mm (1.2 in)
50 mm (1.9 in)
75 mm (2.9 in)
100 mm (3.9 in)
150 mm (5.9 in)
200 mm (7.8 in)
Installing the M18-4 Sensor
To install the M18-4 Sensor:
1. Align the sensor as required for the
application. For the most sensitive object
detection, align the sensor so that the
objects move across the sensor's axis.
Amber LED
Gain adjustment
2. Secure the sensor to a bracket.
3. Wire sensor as shown in the wiring
diagrams.
4. Adjust the gain adjuster (sensitivity pot) if
necessary.
Green LED
Amber LED
Figure 1. M18-4 Features and Installation
Wiring Diagrams
Emitter
Emitter with Active High Beam Inhibit
3
−
3
10–30 V dc
1
–
+
10-30V dc
+
4
1
10–30 V dc
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 188320 Rev. E
M18-4 Stainless Steel 18 mm Barrel Sensors
Complementary Current Sinking (NPN)
Complementary Current Sourcing (PNP)
3
1
–
+
10-30V dc
+
10-30V dc
–
3
1
4
4
Load
Load
2
2
Load
Load
NOTE: Open lead wires must be connected to a terminal block.
Specifications
Supply Voltage
Supply Current (Exclusive of Load Current)
Diffuse: 16 mA
10 V to 30 V dc for ambient temperature ≤ 55 °C
10 V to 24 V dc for ambient temperature > 55 °C
Opposed Mode Emitters: 17 mA
Opposed Mode Receivers: 8 mA
Retroreflective and Polarized Retroreflective: 16 mA
Fixed-Field: 16 mA
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Output Protection Circuitry
Output Configuration
Protected against false pulse on power-up and continuous short circuit
of outputs. Short circuit protection at elevated temperature may
require a power cycle to reset.
Complementary PNP or NPN by model number
Output Response Time
Response is independent of signal strength
Opposed mode: 1.5 milliseconds ON, 1.0 milliseconds OFF
Retro, Polarized Retro, and Diffuse: 1.5 milliseconds ON, 0.75
milliseconds OFF
Fixed-Field: 1.5 milliseconds ON, 1.0 milliseconds OFF
Delay on Power-up: 100 milliseconds; outputs do not conduct during
this time
Output Rating
≤ 50 mA total current for ambient temperatures > 55 °C
≤ 100 mA total current through both outputs ≤ 55 °C
OFF-State Leakage Current: < 50 µA at 30 V dc
ON-State Saturation Voltage: < 1.5 V at 10 mA; < 3.0 V at 100 mA
Indicators
Construction
Three LEDs (1 green, 2 amber)
Housing: 316L stainless steel
Green solid: indicates power applied and sensor ready
Green flashing: indicates marginal sensing signal
Amber solid: indicates Pin 4 (black wire) output conducting
Front window: PMMA
Indicator windows: Clear polysulfone (PSU)
Indicator cover and gain pot driver: Black PSU
Cable: PVC jacket
Pigtail QD: 316L stainless steel and PVC jacket
QD connector and mounting nuts: 316L stainless steel
Emitter LED
Visible red
Repeatability
Adjustments
Repeatability is independent of signal strength
Opposed mode: 170 microseconds
Retro, Polarized Retro, and Diffuse modes: 100 microseconds
Fixed-Field mode: 100 microseconds
Diffuse (DL, DS), Emitter (ES), Receiver (RS), Polarized Retroreflective
(LPC), Retroreflective (LV) models: Single turn sensitivity (gain)
adjustment potentiometer
Emitter Beam Inhibit (EJ) models: Tie black wire to 10 V to 30 V dc for
beam inhibit
P/N 188320 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
3
M18-4 Stainless Steel 18 mm Barrel Sensors
Operating Conditions
Required Overcurrent Protection
−40 °C to +70 °C (−40 °F to +158 °F)
95% at +50 °C maximum relative humidity (non-condensing)
WARNING: Electrical connections must be made by
qualified personnel in accordance with local and
national electrical codes and regulations.
Environmental Rating
IEC 60529 IP67, IP68, and IP69K
Overcurrent protection is required to be provided by end product
application per the supplied table.
Vibration and Mechanical Shock
All models meet Mil. Std. 202F requirements. Method 201A (Vibration;
frequency 10 to 60 Hz, max., double amplitude 0.06 in acceleration
10G). Method 213B conditions H&I (Shock: 75G with unit operating;
100G for non-operation)
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to http://
www.bannerengineering.com.
Certifications
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Industrial
Control
Equipment
Class 2 power ; UL Environmental
Rating: Type 1
3TJJ
Chemical Compatibility Certified.
ECOLAB is a registered trademark
of Ecolab USA Inc. All rights
reserved.
Performance Curves
Diffuse Models (300 mm Range)
Beam Pattern
Excess Gain
20
15
10
1000
100
10
5
0
−5
−10
−15
−20
1
0
50
10 0 15 0
20 0
25 0
30 0 35 0
40 0
1
10
100
1000
DISTANCE (mm)
DISTANCE (mm)
Diffuse Models (750 mm Range)
Beam Pattern
Excess Gain
100
15
10
5
10
0
-5
-10
-15
0
100
200
300
400
500
600
700
800
1
1
10
100
1000
DISTANCE (mm)
DISTANCE (mm)
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 188320 Rev. E
M18-4 Stainless Steel 18 mm Barrel Sensors
Emitter/Receiver Models (Effective Beam Size: 15.2 mm)
Beam Pattern
Excess Gain
1000
100
10
1000
800
600
400
200
0
- 200
- 400
- 600
- 800
- 1000
0
5
10
15
20
25
1
0.1
1
10
100
DISTANCE (m)
DISTANCE (m)
Polarized Retroreflective Models
Beam Pattern
Excess Gain
100
BRT-92x92C
BRT-84
60
40
BRT-60x40C
BRT-40x19A
BRT-60x40IP
BRT-THG-2-100
20
10
0
- 20
- 40
- 60
0
1
2
3
4
5
6
DISTANCE (m)
1
0.01
0.1
1
10
DISTANCE (m)
Retroreflective Models
Beam Pattern
Excess Gain
100
BRT-92x92C
BRT-84
80
BRT-60x40C
BRT-40x19A
BRT-60x40IP
BRT-THG-2-100
60
40
20
10
0
-20
-40
-60
-80
0
1
2
3
4
5
6
7
8
1
DISTANCE (m)
0.01
0.1
1
10
DISTANCE (m)
P/N 188320 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
5
M18-4 Stainless Steel 18 mm Barrel Sensors
Fixed Field Models - Excess Gain
Target for Excess Gain Curves use a 90% Reflective White Card
1000
100
10
1000
100
10
1
1
1
10
100
1000
1
10
100
1000
DISTANCE (mm)
DISTANCE (mm)
M18-4FF30
M18-4FF50
Emitter Image Size: 4.0 mm square at 15 mm and 3.5 mm
square at 30 mm
Emitter Image Size: 4 mm square at 25 mm and 3 mm square
at 50 mm
18% Gray Test Card: Cutoff distance will be 98% of value
shown
18% Gray Test Card: Cutoff distance will be 98% of value
shown
6% Black Test Card: Cutoff distance will be 95% of value shown 6% Black Test Card: Cutoff distance will be 95% of value shown
1000
100
10
1000
100
10
1
1
1
10
100
1000
1
10
100
1000
DISTANCE (mm)
DISTANCE (mm)
M18-4FF75
M18-4FF100
Emitter Image Size: 4.5 mm square at 37 mm and 4.0 mm
square at 75 mm
Emitter Image Size: 4.5 mm square at 50 mm and 4.5 mm
square at 100 mm
18% Gray Test Card: Cutoff distance will be 98% of value
shown
18% Gray Test Card: Cutoff distance will be 95% of value
shown
6% Black Test Card: Cutoff distance will be 95% of value shown 6% Black Test Card: Cutoff distance will be 90% of value shown
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 188320 Rev. E
M18-4 Stainless Steel 18 mm Barrel Sensors
Fixed Field Models - Excess Gain
Target for Excess Gain Curves use a 90% Reflective White Card
1000
1000
100
10
1
100
10
1
1
10
100
1000
1
10
100
1000
DISTANCE (mm)
DISTANCE (mm)
M18-4FF150
M18-4FF200
Emitter Image Size: 5 mm square at 75 mm and 8 mm square
at 150 mm
Emitter Image Size: 5 mm square at 100 mm and 8 mm square
at 200 mm
18% Gray Test Card: Cutoff distance will be 90% of value
shown
18% Gray Test Card: Cutoff distance will be 85% of value
shown
6% Black Test Card: Cutoff distance will be 70% of value shown 6% Black Test Card: Cutoff distance will be 60% of value shown
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
Cable Models
QD Models
P/N 188320 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
7
M18-4 Stainless Steel 18 mm Barrel Sensors
Accessories
Cordsets
All measurements are listed in millimeters, unless noted otherwise.
4-Pin Threaded M12/Euro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
Washdown Cordsets
4-Pin Threaded M12/Euro-Style Cordsets—Washdown, Stainless Steel
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-WDSS-0406
MQDC-WDSS-0415
1.83 m (6 ft)
4.57 m (15 ft)
2
3
1
4
Ø15.5 mm
Straight
Ø4.8 mm
MQDC-WDSS-0430
9.14 m (30 ft)
1 = Brown
2 = White
3 = Blue
43.5 mm
4 = Black
Apertures
Model
Units
Aperture Description
Product
Kit includes round apertures of 0.5 mm (0.02 in), 1.0 mm (0.04
in), and 2.5 mm (0.10 in) diameter.
AP18SCN
3
3
1
Kit includes rectangular apertures of 0.5 mm (0.02 in), 1.0 mm
(0.04 in), and 2.5 mm (0.10 in) wide. Each kit also includes a
AP18SRN
APG18S
®
®
thread-on housing, Teflon FEP lens, and o-ring.
Kit with glass lens to protect plastic sensor lens from chemical
environments and weld splatter damage.
8
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 188320 Rev. E
M18-4 Stainless Steel 18 mm Barrel Sensors
Brackets
SMB18SF
SMBS18-2-1
M18 - 1 x 6G
51
•
18 mm swivel bracket
with M18 × 1 internal
thread
•
30% glass-filled PBT
B
42
4.5
•
•
Black thermoplastic
polyester
Stainless steel swivel
locking hardware
included
ø28
25
A
Hole center spacing: A = 36.0
Hole size: A = ø 5.3, B = ø 18.0
SMB18A
SMB18FA..
66
•
Right-angle mounting
bracket with a curved
slot for versatile
orientation
•
Swivel bracket with tilt
and pan movement for
precision adjustment
30
C
41
B
•
•
•
Easy sensor mounting to
extruded rail T-slots
Metric and inch size bolts
available
18 mm sensor mounting
hole
A
B
•
•
12-ga. stainless steel
18 mm sensor
mounting hole
69
A
46
•
Clearance for M4 (#8)
hardware
Hole center spacing: A to B = 24.2
Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5
Hole size: B=ø 18.1
Model
Bolt Thread (A)
3/8 - 16 × 2 in
M10 - 1.5 × 50
SMB18FA
SMB18FAM10
SMB18FAM12
n/a; no bolt included.
Mounts directly to 12 mm
(½ in) rods
For additional brackets, check the current Banner catalog or visit www.bannerengineering.com. All measurements are
listed in millimeters, unless noted otherwise.
Reflectors
BRT-2X2
BRT-84X84A
•
•
•
Square, acrylic target
Reflectivity factor: 1.0
Max. temperature: +50 °C
(+122 ºF)
•
•
•
Square, acrylic target
Reflectivity Factor: 2.0
Temperature: −20 °C to +60 °C
(−4 °F to +140 °F)
•
•
Optional brackets are available
Approximate size: 51 mm × 51
mm
•
Approximate size: 84 mm × 84
mm
P/N 188320 Rev. E
www.bannerengineering.com - Tel: +1-763-544-3164
9
M18-4 Stainless Steel 18 mm Barrel Sensors
BRT-40X19A
BRT-60X40C
•
•
•
Rectangular, acrylic target
Reflectivity Factor: 1.3
Temperature: −20 °C to +60 °C
(−4 °F to +140 °F)
•
•
•
Rectangular, acrylic target
Reflectivity Factor: 1.4
Temperature: −20 °C to
+60 °C (−4 °F to +140 °F)
•
Approximate size: 19 mm × 60
mm overall; 19 mm × 40 mm
reflector
•
•
Optional brackets are available
Approximate size: 40 mm × 60
mm
Retroreflective Tape
BRT-84
•
•
•
Round, acrylic target
Reflectivity Factor: 1.4
Temperature: −20 °C to +60 °C
(−4 °F to +140 °F)
Optional brackets are available
Size: 84 mm diameter
Mounting Hole: 4.5 mm diameter
Model
Reflectiv
ity
Factor
Maximum
Temperatur
e
Size
BRT-
THG-2-100
0.7
+60 °C
(+140 °F)
50 mm (2 in)
wide, 2.5 m (100
in) long
•
•
•
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
Copyright Notice
Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not
intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product
warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any
©
time. For the most recent version of any documentation, refer to: www.bannerengineering.com.
Banner Engineering Corp. All rights reserved.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号:
©2020 ICPDF网 联系我们和版权申明