SMB3018SC_技术文档

MINI-BEAM SME312 Expert Series

Instruction Manual

Microprocessor-Based TEACH Mode Photoelectric Sensors

•

TEACH-mode sensors in the popular MINI-BEAM package

Easy push-button programming automatically adjusts sensitivity to optimal

setting

•

Multiple sensing modes include retroreflective, polarized retro, clear object

detection, diffuse, divergent, and convergent, plus glass and plastic fiber

optic models

•

Fast, 500 microsecond (0.5 millisecond) output response

Bipolar NPN (sinking)/PNP (sourcing) outputs

Easy output programming eliminates the need for Light or Dark operate

selection

•

Separate TEACH input allows remote programming by an external device,

such as a switch or process controller

LED status indications for received signal strength (using Banner's AID

function), power ON, and output state

Green Stability indicator flashes when received signal level approaches the

switching threshold, also indicates Power ON

™

U.S. patent(s) issued or pending

Integral 2 m (6.5 ft) cable or 5-pin Euro-style quick-disconnect (QD)

connector, depending on model; 9 m (30 ft) cable models are also available

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Retroreflective Models

1

2

Model

Sensing Mode

Range or Focus

Supply Voltage

Output Type

SME312LV

SME312LP

Retroreflective, Visible red, 650 nm

5 m (15 ft)

Polarized retroreflective, Visible red, 650 nm

10 mm to 3 m (0.4 in to 10 ft)

10 V dc to 30 V dc

Bipolar NPN/PNP

Polarized retroreflective, Visible red, 650 nm

(clear object)

SME312LPC

1 m (3.3 ft) with supplied reflector

Diffuse Models

1

Model

Sensing Mode

Range or Focus

380 mm (15 in)

1100 mm (43 in)

130 mm (5 in)

Supply Voltage

Output Type

SME312D

SME312DV

SME312W

Diffuse, Infrared, 880 nm

Diffuse, Visible red, 650 nm

Divergent Diffuse, Infrared, 880 nm

10 V dc to 30 V dc

Bipolar NPN/PNP

1

Standard 2 m (6.5 ft) cable models are listed. To order the 9 m (30 ft) cable model, add suffix “W/30” to the model number (for example,

SME312LV W/30.) To order the 5-pin Euro-style QD models, add suffix “QD” (for example, SME312LVQD). Models with a QD connector require a

mating cable.

Sensing ranges vary according to the efficiency and reflective area of the retroreflector(s) used. (Retroreflective tape is not recommended for use

with Clear Object Detection models.) See Accessories and the Banner Engineering catalog for more information.

2

Original Document

55214 Rev. G

13 July 2016

55214

MINI-BEAM SME312 Expert Series

Convergent Models

1

Model

Sensing Mode

Range or Focus

16 mm (0.65 in)

43 mm (1.7 in)

16 mm (0.65 in)

Spot Size at Focus

1.3 mm (0.05 in)

3.0 mm (0.12 in)

1.0 mm (0.04 in)

Supply Voltage

Output Type

SME312CV

SME312CV2

SME312CVG

SME312CVB

SME312CVW

Convergent, Visible red, 650 nm

Convergent, Visible green, 525 nm

Convergent, Visible blue, 475 nm

Convergent, Visible white, 450–650 nm

10 V dc to 30 V dc

Bipolar NPN/PNP

16 mm (0.65 in)

1.8 mm (0.07 in)

Glass Fiber Optic Models

1

Model

Sensing Mode

Range or Focus

Supply Voltage

Output Type

SME312F

Glass Fiber Optic, 880 nm infrared

Glass Fiber Optic, Visible red, 650 nm

Glass Fiber Optic, Visible green, 525 nm

Glass Fiber Optic, Visible blue, 475 nm

Glass Fiber Optic, Visible white, 450–650 nm

SME312FV

SME312FVG

SME312FVB

SME312FVW

Range varies by sensing mode and

fiber optics used

10 V dc to 30 V dc

Bipolar NPN/PNP

Plastic Fiber Optic Models

1

Model

Sensing Mode

Range or Focus

Supply Voltage

Output Type

SME312FP

SME312FPG

SME312FPB

SME312FPW

Plastic Fiber Optic, Visible red, 650 nm

Plastic Fiber Optic, Visible green, 525 nm

Plastic Fiber Optic, Visible blue, 475 nm

Plastic Fiber Optic, Visible white, 450–650 nm

Range varies by sensing mode and

fiber optics used

10 V dc to 30 V dc

Bipolar NPN/PNP

Overview

®

™

MINI-BEAM Expert is a complete family of sensors, all housed in the

popular, robust and compact rectangular housing. Their large push button

and easy-to-see indicators provide easy configuration, alignment, and

monitoring during use.

Amber output

indicator LED

Retroreflective and Polarized Retroreflective Mode models are excellent

for sensing relatively small items where opposed-mode sensing is not

possible. They are recommended for relatively clean environments where

high excess gain is not required. Polarized models filter out unwanted

reflections.

Bi-color green/red

indicator LED

Polarized Retroreflective Mode – Clear Object Detection models reliably

detect the presence of clear objects.

Diffuse Mode models are excellent for sensing objects of adequate size and reflectivity at short range. Divergent models

are useful for sensing small items and translucent or transparent materials at close range. The SME312DV sensors

effectively sense specular surfaces like semi-conductor wafers, disk drive media, glass and machined surfaces. The

collimated optics of the SME312DV also permits the sensor to be mounted against clear container walls, view ports and

other types of optical “feed-throughs.”

Convergent Mode models are a good choice for counting adjacent radiused objects and for accurate position sensing.

Blue, green and white beam models are recommended for color mark sensing.

Glass Fiber Optic models are an excellent option for sensing in tight or otherwise inaccessible areas. Fibers withstand

vibration and shock and are immune to electrical noise. Glass fibers withstand high temperatures, extreme moisture and

corrosive materials. Glass fibers are not recommended for applications requiring bending or repeated flexing (see plastic

fiber models). Visible beam models are recommended for color mark sensing.

2

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 55214 Rev. G

MINI-BEAM SME312 Expert Series

Plastic Fiber Optic models are an excellent option for sensing in tight or otherwise inaccessible areas. Fibers withstand

vibration and shock and are immune to electrical noise. Plastic fibers function well at temperatures from –30° to +70° C (–

20° F to +158° F), and stand up to repeated flexing. Most are easy to shorten in the field, for custom installations. Plastic

fibers are not recommended for severe environments (see glass fiber models). Plastic fiber optic sensors are recommended

for color mark sensing.

Status Indicators

Normal sensor operation is called RUN mode. Sensor configuration (setting the sensitivity threshold and selecting output

ON and OFF conditions) is performed in TEACH mode. The two LED indicators (bi-color green/red and amber) have distinct

roles in the two operation modes. If contrast is marginal, the bi-color indicator will flash green to indicate instability. If this

occurs, reconfigure or realign the sensor, or clean the sensor or fiber lenses.

™

The Signal Strength indicator is Banner’s exclusive AID (Alignment Indicating Device). Its pulse rate increases as the

received light signal strength increases (during programming). This feature simplifies accurate alignment during TEACH

mode, and gives a relative indication of sensing contrast between the light and dark conditions.

LED

RUN Mode

TEACH Mode

Solid green

Flashing green

Power is on

Sensed light level is approaching sensing

3

threshold

Solid red

Sensor “sees” its own modulated light source; pulse rate is proportional to the

received light signal strength

4

Amber on

Amber off

Outputs conducting

Ready to TEACH output ON condition

Ready to TEACH output OFF condition

Outputs not conducting

Remote Configuration

The remote function can be used to configure the sensor remotely or to disable the push button for security. Connect the

gray wire of the sensor to ground (0 V dc), with a remote programming switch connected between them. Pulse the remote

line according to the diagrams in the configuration procedures. The length of the individual programming pulses is equal to

the value T where: 0.04 seconds ≤ “T” ≤ 0.8 seconds

Installation

Wiring Diagrams

Cabled Models

QD Models

bn

bu

wh

bn

+

–

+

–

10-30V dc

bu

wh

bk

gy

Load

bk

Load

gy

Remote

Teach

Remote

Teach

3

4

This is the Stability indicator, which signals when maintenance, realignment, or reconfiguration is needed during RUN mode.

The faster the pulse rate, the stronger the light signal.

P/N 55214 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

3

MINI-BEAM SME312 Expert Series

Glass Fiber Installation

Retaining Clip

O-ring

1. Install the O-ring (supplied with the fiber) on each fiber end, as

shown in the drawing.

2. While pressing the fiber ends firmly into the ports on the sensor

front, slide the U-shaped retaining clip (supplied with the sensor)

into the slot in the sensor's barrel, until it snaps into place.

Plastic Fiber Installation

1. With supplied fiber cutter, make a clean cut at the control

ends of fibers.

2. Unlock the fiber gripper as shown in the drawing.

3. Apply appropriate fiber adaptors to the fiber, if needed.

4. Gently insert the prepared fiber ends into the ports as far

Gripper

Unlock

Adapters for

0.25- and 0.5-mm fibers

Lock

as they will go.

5. Slide the fiber gripper back to lock, as shown in the

drawing.

Trimmed fiber

control ends

Sensor Face

Plastic fiber

receiver port

Plastic fiber

emitter port

Static Teach

The two sensing conditions may be presented in either order. The condition

presented first is the condition for which the output will energize (the “Output

ON” target).

2nd Taught

Condition

1st Taught

Condition

Sensor positions

threshold between

taught conditions

Sensitivity is automatically set (and optimized) when teaching the sensor the

ON and OFF conditions. When the push button is clicked, the sensor samples

each sensing condition and registers it into memory. After the second sensing

condition is registered, the MINI-BEAM Expert automatically sets the sensitivity

to the optimum value for the application, and then returns to RUN mode.

Output OFF

Output ON

Push button (0.04 seconds ≤ “Click” ≤ 0.8 seconds); Remote line (0.04

seconds ≤ “T” ≤ 0.8 seconds)

1. Access TEACH mode.

Method

Action

Result

Via push button

Press and hold push button until the bi-color (green/

red) indicator begins to flash red, or turns OFF.

Push button method only: The amber LED is on. The

red LED pulses to indicate relative received signal

strength. The sensor is ready for the output ON

condition.

Via remote line

No action required; sensor is ready for 1st sensing

condition.

4

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 55214 Rev. G

MINI-BEAM SME312 Expert Series

2. Teach the first sensing condition.

Method

Action

Result

Via push button

Present the first sensing condition and click the push

button.

The amber LED is off. The red LED pulses to indicate

relative signal strength. The sensor registers the

output ON condition and is ready for the output OFF

condition.

Via remote line

Present the first sensing condition and single-pulse the

remote line.

3. Teach the second sensing condition and return to RUN mode.

Method

Action

Result

Via push

button

Present the second sensing condition

and click the push button.

If the teach is accepted the green LED is on (or flashes if the signal is

close to the switching threshold) and the amber LED is off until the

sensing condition changes; the sensor registers the output OFF

condition, positions the threshold, and returns to RUN mode.

Via remote line Present the second sensing condition

and single-pulse the remote line.

If the teach is not accepted, the amber LED is on and the red LED pulses

to indicate the relative received signal strength. The sensor returns to its

wait state and is ready for the first sensing condition.

NOTE: The sensor returns to RUN mode if the first TEACH condition is not registered within 90 seconds. TEACH mode may be

cancelled before either the first or second condition by holding the push button depressed for more than two seconds.

Enabling or Disabling the Push Button

In addition to its programming function, the remote line may be used to disable the push buttons for security. Disabling

the push buttons prevents undesired tampering with the sensor configuration settings.

1. Connect the sensor’s gray wire.

2. Four-pulse the remote line to enable or disable the push button.

The sensor toggles between enable and disable settings and returns to RUN mode.

P/N 55214 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

5

MINI-BEAM SME312 Expert Series

Specifications

Supply Voltage and Current

Connections

10 V dc to 30 V dc (10% maximum ripple) at less than 45 mA,

exclusive of load

PVC-jacketed 5-conductor 2 m (6.5 ft) or 9 m (30 ft) unterminated

cable, or 5-pin Euro-style quick-disconnect (QD) fitting are available.

QD cables are ordered separately.

Supply Protection Circuitry

Application Notes

Protected against reverse polarity and transient voltages

The first condition presented during TEACH mode becomes the output

ON condition.

Adjustments

Push-button TEACH mode sensitivity setting; remote TEACH mode

input is provided

Output Configuration

Bipolar: One current sourcing (PNP) and one current sinking (NPN)

open-collector transistor

Indicators

Two LEDs: amber and bi-color green/red

Output Rating

Construction

150 mA maximum each output at 25° C, derated to 100 mA at 70° C

(derate ≈1 mA per °C)

Off-state leakage current: less than 5 μA at 30 V dc

ON-state saturation current: less than 1 V at 10 mA; less than 1.5 V at

150 mA

Reinforced thermoplastic polyester housing, totally encapsulated, o-

ring seal, acrylic lenses, and stainless steel screws.

Required Overcurrent Protection

WARNING: Electrical connections must be made by

qualified personnel in accordance with local and

national electrical codes and regulations.

Output Protection Circuitry

Protected against false pulse on power-up and continuous overload or

short-circuit of outputs

Overcurrent protection is required to be provided by end product

application per the supplied table.

Output Response Time

Sensors will respond to either a “light” or a “dark” signal of 500

microseconds or longer duration, 1 kHz max.

Overcurrent protection may be provided with external fusing or via

Current Limiting, Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to http://

www.bannerengineering.com.

NOTE: 1 second delay on power-up; outputs do not

conduct during this time.

Repeatability

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

100 microseconds (all models)

20

22

24

26

28

30

5.0

3.0

2.0

1.0

0.8

0.5

Rating

Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 6, 12, and 13; IEC IP67

Operating Conditions

Temperature: –20° to +70° C (–4° to +158° F)

Max. Relative Humidity: 90% at 50° C (non-condensing)

Dimensions

Cabled Models

Divergent Diffuse Models

(Suffix E, EL, EPD, R, RL, RPD, LV, LVAG, LP, LPC, D, C, C2,

CV, CV2, CVG, CV2G, CVB, CV2B, CVW )

(Suffix DBZ and W)

3 mm dia Clearance (2)

3.2 mm (0.13”)

12.2 mm (0.48”)

Bezel

30.7 mm

(1.21”)

18.0 mm (0.71”)

24.1 mm

3 mm dia Clearance (2)

(0.95”)

M18 × 1 × 15 mm Thread

(Mounting nut supplied)

2 m (6.5’) Cable

Mounting peg

(6.3 mm dia × 2.5 mm)

39.1 mm

13.2 mm (0.52”)

(1.54”)

19.1 mm (0.75”)

27.4 mm (1.08”)

53.3 mm (2.10”)

6

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 55214 Rev. G

MINI-BEAM SME312 Expert Series

Glass Fiber Models

(Suffix F, FV, FVB, FVG, FVW)

Plastic Fiber Models

(Suffix FP, FPB, FPG, FPH, FPW)

3.2 mm (0.13”)

12.2 mm (0.48”)

30.7 mm

(1.21”)

M18 x 1 x 19 mm Thread

(Mounting Nut Supplied)

Fiber Optic Fitting

24.1 mm

(0.95”)

3 mm dia clearance (2)

Fiber

Optic

Fitting

2 m (6.5’) Cable

Mounting Peg

(6.3 mm dia × 2.5 mm)

22.3 mm

(0.88”)

19.1 mm

(0.75”)

57.5 mm (2.27")

31.2 mm (1.23")

16.2 mm

(0.64”)

42.1 mm

(1.66”)

QD Models

12 mm Thread

Quick-disconnect

20.0 mm

(0.79”)

Performance Curves

Retroreflective

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

100

10

SME312LV

SME312LP

Retroreflective Mode

75 mm

3.0"

60 mm

2.4"

SME312LV

SME312LP

E

X

C

E

S

E

X

C

E

S

Retroreflective Mode

50 mm

25 mm

2.0"

1.0"

0

40 mm

20 mm

1.6"

0.8"

0

Retroreflective Mode

100

0

25 mm

50 mm

75 mm

1.0"

2.0"

3.0"

20 mm

40 mm

60 mm

0.8"

1.6"

2.4"

10

G

A

I

A

I

0

1 m

3'

2 m

6'

3 m

9'

4 m

12'

5 m

15'

0

.6 m

2'

1.2 m

4'

1.8 m

6'

2.4 m

8'

3.0 m

10'

N

DISTANCE

1

.01 m

.033'

.10 m

.33'

1.0 m

3.3'

10 m

33'

.01 m

0.03'

0.1 m

0.3'

1 m

3'

10 m

30'

DISTANCE

1000

100

10

SME312LPC

150 mm

6"

Retroreflective Mode

E

X

C

E

S

Retroreflective

Mode

100 mm

50 mm

4"

2"

0

with BRT-77X77

Reflector

with BRT-2X2

Reflector

with BRT-77X77

Reflector

0

50 mm

100 mm

150 mm

2"

4"

6"

with BRT-2X2

Reflector

G

A

I

0

.5 m

1.7'

1 m

3.3'

1.5 m

5'

2 m

6.6'

2.5 m

8.3'

N

1

DISTANCE

.01 m

.033'

.1 m

.33'

1.0 m

3.3'

10.0 m

33'

DISTANCE

P/N 55214 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

7

MINI-BEAM SME312 Expert Series

Diffuse

Diffuse-mode performance based on 90% reflectance white test card.

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

20 mm

15 mm

0.8"

0.6"

SME312DV

Diffuse Mode

SME312D

SME312DV

Diffuse Mode

15 mm

0.6"

E

X

C

Diffuse Mode

10 mm

5 mm

0

0.4"

0.2"

0

10 mm

5 mm

0.4"

0.2"

0

100

E

0

S

5 mm

10 mm

15 mm

0.2"

0.4"

0.6"

5 mm

10 mm

15 mm

20 mm

0.2"

0.4"

0.6"

0.8"

10

G

A

I

0

75 mm 150 mm 225 mm 300 mm 375 mm

3.0"

N

0

250 mm 500 mm 750 mm 1000 mm 1250 mm

10.0" 20.0" 30.0" 40.0" 50.0"

6.0"

9.0"

12.0"

15.0"

1

DISTANCE

10 mm

0.4"

100 mm

4.0"

1000 mm

40"

10000 mm

400"

DISTANCE

1000

SME312W

Diffuse Mode

SME312W

Diffuse Mode

22.5 mm

0.9"

E

X

C

15.0 mm

7.5 mm

0.6"

0.3"

0

100

E

0

S

7.5 mm

15.0 mm

22.5 mm

0.3"

0.6"

0.9"

10

G

A

I

N

0

25 mm

1.0"

50 mm

2.0"

75 mm 100 mm 125 mm

3.0" 4.0" 5.0"

DISTANCE

1

1 mm

.04"

10 mm

.4"

100 mm

4"

1000 mm

40"

DISTANCE

Convergent

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

SME312CV

3.0 mm

SME312CV2

3.0 mm

SME312CV

0.12

"

0.12"

SME312CV2

Convergent Mode

E

X

C

E

X

C

2.0 mm

0.08

0.04

0

"

2.0 mm

0.08"

0.04"

0

Convergent Mode

1.0 mm

0

1.0 mm

0

100

E

S

1.0 mm

2.0 mm

3.0 mm

0.04

0.08

0.12

"

1.0 mm

2.0 mm

3.0 mm

0.04"

0.08"

0.12"

10

G

10

G

A

I

A

I

0

7.5 mm

0.3

15 mm 22.5 mm 30 mm 37.5 mm

0.6 0.9 1.2 1.5

0

25 mm

1"

50 mm

2"

75 mm 100 mm 125 mm

3" 4" 5"

"

N

DISTANCE

1

1 mm

.04

10 mm

.4

100 mm

1000 mm

40

1 mm

.04

10 mm

.4

100 mm

1000 mm

40

"

4

"

4

"

DISTANCE

1000

100

10

SME312CVG

SME312CVB

SME312CVW

SME312FPG

SME312FPB

SME312FPW

3.0 mm

0.12"

E

X

C

E

S

2.0 mm

1.0 mm

0.08"

0.04"

0

Convergent Mode

0

Diffuse Mode

Plastic Fiber

1.0 mm

2.0 mm

3.0 mm

0.04"

0.08"

0.12"

PBT46U Fiber

G

A

I

0

7.5 mm

0.3"

15 mm 22.5 mm 30 mm 37.5 mm

0.6" 0.9" 1.2" 1.5"

N

DISTANCE

1

.1 mm

.004 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

DISTANCE

8

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 55214 Rev. G

MINI-BEAM SME312 Expert Series

Glass Fiber Optic

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

SME312F

E

1000

SME312F

75 mm

1.9 mm

0.075

"

SME312F

3

"

SME312F

Diffuse Mode

Opposed Mode

50 mm

E

X

C

1.3 mm

0.050

0.025

0

"

Opposed Mode

2

1

0

1

2

3

"

X

Diffuse Mode

Glass Fibers

0.65 mm

25 mm

C

100

0

BT13S

BT23S

100

E

0

IT13S

IT23S

0.65 mm

0.025

0.050

0.075

"

S

25 mm

"

1.3 mm

1.9 mm

IT23S Fibers

w/L9 lenses

50 mm

75 mm

BT23S Fiber

10

G

A

I

G

A

I

0

7.5 mm

0.3

15 mm 22.5 mm 30 mm 37.5 mm

0.6 0.9 1.2 1.5

"

IT13S

Fibers

IT23S

Fibers

0

100 mm 200 mm 300 mm 400 mm 500 mm

12 16 20

BT13S Fiber

N

DISTANCE

4

"

8

"

N

1

DISTANCE

1 mm

.04

10 mm

.4

100 mm

1000 mm

40

.01 m

.033'

.1 m

.33'

1 m

3.3'

10 m

33'

"

4

"

DISTANCE

1000

100

10

SME312FV

Diffuse Mode

1000

SME312FV

Opposed Mode

1.95 mm

0.075 "

SME312FV

Diffuse Mode

75 mm

3

"

SME312FV

Opposed Mode

E

X

C

E

S

E

1.30 mm

0.65 mm

0.050

0.025

0

"

50 mm

25 mm

2

1

0

1

2

3

"

X

C

E

S

100

10

0

BT13S

BT23S

20 mm

0

IT13S

IT23S

0.65 mm

1.30mm

1.95 mm

0.025

0.050

0.075

"

25 mm

50 mm

75 mm

"

IT23S Fiber

BT23S Fiber

G

A

I

G

A

I

IT13S Fiber

0

5 mm

0.2

10 mm

0.4

15 mm

0.6

25 mm

1.0

"

0.8

"

0

50 mm 100 mm 150 mm 200 mm 250 mm

10

N

BT13S Fiber

1 mm

2

"

4

"

6

"

8

"

N

DISTANCE

1

DISTANCE

1 mm

.04"

10 mm

.40"

100 mm

4.0"

1000 mm

40"

.1 mm

.004

10 mm

.40

100 mm

4"

"

.04

"

DISTANCE

1000

100

SME312FVG

SME312FVB

SME312FVW

SME312FVG

SME312FVB

SME312FVW

3.0 mm

2.0 mm

1.0 mm

0.12"

0.08"

0.04"

E

X

C

E

S

Diffuse Mode

BT23S Fiber

0

BT23S

BT13S

1.0 mm

2.0 mm

3.0 mm

0.04"

0.08"

0.12"

10

G

A

I

0

8 mm

0.3"

16 mm

0.6"

24 mm

0.9"

32 mm

1.2"

40 mm

1.5"

BT13S Fiber

1 mm

N

DISTANCE

1

.1 mm

.004

10 mm

0.40

100 mm

4.0

"

0.04

"

DISTANCE

Plastic Fiber Optic

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

SME312FP

Diffuse Mode

SME312FP

45 mm

SME312FP

3.8 mm

0.15

"

1.8"

Opposed Mode

30 mm

E

X

C

E

X

C

E

S

Diffuse Mode

Plastic Fibers

Opposed Mode

Plastic Fibers

2.5 mm

1.2 mm

0.10

0.05

0

"

1.2"

0.6"

0

15 mm

100

10

E

0

PBT46U

PBT26U

0

PIT46U

PIT26U

S

PBT46U Fiber

1.2 mm

2.5 mm

3.8 mm

0.05

0.10

0.15

"

15 mm

30 mm

45 mm

0.6"

1.2"

1.8"

PIT46U Fiber

10

G

A

I

PIT26U Fiber

A

I

N

0

7.5 mm

0.3

15 mm 22.5 mm 30 mm 37.5 mm

0.6 0.9 1.2 1.5

0

25 mm

1"

50 mm

2"

75 mm 100 mm 125 mm

3" 4" 5"

"

PBT26U Fiber

N

DISTANCE

1

DISTANCE

1 mm

.04

10 mm

.40

100 mm

4.0

1000 mm

40

.1 mm

.004

1 mm

.04

10 mm

100 mm

4"

"

.4

"

DISTANCE

P/N 55214 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

9

MINI-BEAM SME312 Expert Series

Excess Gain

Beam Pattern

Excess Gain

Beam Pattern

1000

SME312FPG

SME312FPB

SME312FPW

SME312FPG

SME312FPB

SME312FPW

3.0 mm

2.0 mm

0.12"

E

X

C

0.08"

0.04"

0

Diffuse Mode

Plastic Fiber

1.0 mm

100

0

E

Diffuse Mode

Plastic Fiber

PBT46U

S

1.0 mm

2.0 mm

3.0 mm

0.04"

0.08"

0.12"

PBT46U Fiber

10

G

A

I

N

0

4 mm

0.15"

8 mm

0.30"

12 mm

0.45"

16 mm

0.60"

20 mm

0.75"

DISTANCE

1

.1 mm

.004 in

1 mm

.04 in

10 mm

.4 in

100 mm

4 in

DISTANCE

Troubleshooting

If the MINI-BEAM Expert’s Power LED alternately flashes red/green, this indicates a microprocessor memory error. To clear

the error, re-teach the sensor or cycle the power ON and OFF and re-teach the sensor. If this does not solve the problem,

or if it occurs frequently, replace the sensor.

Accessories

Retroreflective Targets

Banner offers a wide selection of high-quality retroreflective targets. See your current Banner Engineering Corp catalog for

complete information on available models. Sensing range will vary, according to the retroreflector’s efficiency and

reflective area.

•

For long-range applications: model BRT-77X77C reflector provides a range up to 2 m (6.5').

For clear object detection (low-contrast applications): reflector model BRT-2X2 is recommended; one comes

bundled with each SME312LPC(QD) sensor.

•

Polarized sensors require corner-cube type retroreflective targets only; reflective tape is not recommended.

Before installing retroreflective tape, clean the mounting surface with an isopropyl alcohol wipe.

Optional brackets for mounting reflective targets are available. See the Accessories section of your current Banner catalog

or our website at www.bannerengineering.com.

84.5 mm

(3.3")

BRT-2X2

BRT-77X77C

77 mm

(3.0")

9 mm

(0.4")

•

Square, acrylic target

Reflectivity factor: 1.0

Max. temperature: +50 °C (+122 ºF)

Optional brackets are available

Approximate size: 51 mm × 51 mm

•

Square, acrylic target

Reflectivity Factor: 2.0

Temperature: −20 °C to

+60 °C (−4 °F to

+140 °F)

Optional brackets are

available

84.5 mm

(3.3")

77 mm

(3.0")

Clear

Acrylic

Lens

•

Approximate size: 84.5

mm × 84.5 mm

3.5 mm

(0.13")

Retroreflective tape is available in

a variety of sizes and shapes; see

your Banner Catalog for more

information.

BRT-TVHG

•

Reflectivity factor: 0.8

Max. Temperature:

+60 °C (+140 °F)

Not recommended for use with

clear object detection sensors.

10

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 55214 Rev. G

MINI-BEAM SME312 Expert Series

5-Pin Euro-Style Cordsets

5-Pin Threaded M12/Euro-Style Cordsets—Single Ended

Model

Length

Style

Dimensions

Pinout (Female)

MQDC1-501.5

MQDC1-506

MQDC1-515

0.50 m (1.5 ft)

1.83 m (6 ft)

4.57 m (15 ft)

44 Typ.

Straight

M12 x 1

2

MQDC1-530

9.14 m (30 ft)

ø 14.5

1

4

3

MQDC1-506RA

MQDC1-515RA

1.83 m (6 ft)

4.57 m (15 ft)

5

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

4 = Black

5 = Gray

30 Typ.

[1.18"]

Right-Angle

MQDC1-530RA

9.14 m (30 ft)

M12 x 1

ø 14.5 [0.57"]

Mounting Brackets

SMB46L

SMB46S

54

43

65

16

•

Right-angle

L bracket

14-ga. 316 stainless

steel

•

Right-angle

S bracket

14-ga. 316 stainless

steel

54

65

A

B

27

Hole center spacing: A = 16.0

Hole size: A = 16.5 × 18.7

Hole center spacing: A = 16.0

Hole size: A = 16.5 × 18.7, B = 34.0 × 10.0

70

SMB46U

SMB18A

•

Right-angle

U bracket for sensor

protection

14-ga. 316 stainless

steel

•

Right-angle mounting

bracket with a curved

slot for versatile

orientation

12-ga. stainless steel

18 mm sensor mounting

hole

30

C

41

•

A

B

54

•

46

A

•

Clearance for M4 (#8)

hardware

65

Hole center spacing: A to B = 24.2

Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 18.5

Hole center spacing: A = 16.0

Hole size: A = 16.5 × 18.7, B = 34.0 × 13.0

P/N 55214 Rev. G

www.bannerengineering.com - Tel: +1-763-544-3164

11

MINI-BEAM SME312 Expert Series

SMB18AFA..

SMB18Q

44

•

Protective, swivel

•

Right-angle flanged

bracket

18 mm sensor mounting

hole

bracket with tilt and pan

movement for precision

adjustment

Easy sensor mounting to

extruded rail T-slots

Metric and inch size bolts

available

Mounting hole for 18 mm

sensors

46

A

B

•

51

41

ø18.1

•

12-ga. stainless steel

3/8-16

ø19.8

UNC

51

C

X 2 in.

30

Hole center spacing: A to B = 24.2

Hole size: A = ø 4.6, B = 17.0 × 4.6, C = ø 19.0

Hole size: B = ø 18.1

Model

Bolt Thread (A)

3/8 - 16 × 2 in

M10 - 1.5 × 50

SMB18AFA

SMB18AFAM10

SMB18SF

SMB18UR

51

C

•

18 mm swivel bracket with

M18 × 1 internal thread

Black thermoplastic

polyester

Stainless steel swivel

•

2-piece universal swivel

bracket

B

•

300 series stainless steel

A

42

Stainless steel swivel

locking hardware

included

137

B

locking hardware included

25

A

•

Mounting hole for 18 mm

sensor

64

42

Hole center spacing: A = 36.0

Hole size: A = ø 5.3, B = ø 18.0

Hole center spacing: A = 25.4, B = 46.7

Hole size: B = 6.9 × 32.0, C = ø 18.3

SMB312PD

SMBAMS18RA

•

Right-angle mounting

bracket with a curved

slot for versatile

orientation

12-ga. stainless steel

18 mm sensor mounting

hole

A

•

Right-angle SMBAMS

series bracket with 18

mm hole

Articulation slots for 90+

° rotation

40

46

C

•

B

48

•

41

32

12-ga. (2.6 mm) cold-

rolled steel

A

45

B

C

•

Clearance for M4 (#8)

hardware

Hole center spacing: A to B = 24.2

Hole size: A = ø 4.6, B = 17 × 4.6, C = ø 18.5

Hole center spacing: A = 26.0, A to B = 13.0

Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0

NOTE: Not for use with plastic fiber optic

sensors

SMBAMS18P

SMB30SK

68

•

Flat SMBAMS series

bracket with 18 mm hole

Articulation slots for 90+

° rotation

12-ga. (2.6 mm) cold-

rolled steel

•

Flat-mount swivel bracket

with extended range of

motion

Black reinforced

thermoplastic polyester and

316 stainless steel

A

C

B

57

78

A

B

78

Stainless steel swivel locking

hardware included

45

Hole center spacing: A = 50.8

Hole size: A = ø 7, B = ø 18

Hole center spacing: A = 26.0, A to B = 13.0

Hole size: A = 26.8 × 7.0, B = ø 6.5, C = ø 19.0

12

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 55214 Rev. G

MINI-BEAM SME312 Expert Series

SMB3018SC

SMB30SUS

67

•

18 mm swivel side or

barrel-mount bracket

Black reinforced

thermoplastic polyester

Stainless steel swivel

locking hardware

included

•

Side-mount swivel with

extended range of motion

Black reinforced

thermoplastic polyester

Stainless steel swivel locking

hardware included

B

59

58

29

A

Hole center spacing: A = 50.8

Hole size: A = ø 7.0, B = ø 18.0

Hole center spacing: A = 50.8, B = 24.1

Hole size: A = ø 7, B = ø 7.6

SMB312S

SMB312B

24

23

B

51

•

Stainless steel 2-axis,

side-mount bracket

•

Stainless steel 2-axis,

bottom-mount bracket

Includes mounting foot

46

C

A

B

C

32

20

A = diam. 6.9, B = 4.3 × 10.5, C

= 3.1 × 15.2

A = 4.3 × 7.5, B = diam. 3, C = 3

× 15.3

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.

will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty

period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,

ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE

OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE

LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,

CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER

ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product

previously manufactured by Banner Engineering Corp.

Copyright Notice

Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not

intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product

warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any

©

time. For the most recent version of any documentation, refer to: www.bannerengineering.com.

www.bannerengineering.com - Tel: +1-763-544-3164


型号：	SMB3018SC
厂家：	Banner Engineering
描述：	MINI-BEAM SME312 Expert Series
文件：	总13页 (文件大小：1109K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMB3018SC [BANNER]

相关型号：

UL1042

ZXFV201

ZXFV201N14

ZXFV201N14TA

ZXFV201N14TC

ZXFV202E5

ZXFV202N8

ZXFV203N14

ZXFV301N16(1)

ZXFV302N16

ZXFV4089

ZXFV4089N8