T18AW3FF50 [BANNER]

T18 Series Sensors (AC Voltage);


型号：	T18AW3FF50
厂家：	Banner Engineering
描述：	T18 Series Sensors (AC Voltage)
文件：	总3页 (文件大小：329K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

T18 Series Sensors (AC Voltage)

Datasheet

For complete technical informaꢀon about this product, including dimensions, accessories, and speciꢁcaꢀons, see hꢀp://

www.bannerengineering.com and search for your model number. See also document 121525.

WARNING: Not To Be Used for Personnel Protecꢀon

Never use this device as a sensing device for personnel protecꢀon. Doing so

could lead to serious injury or death. This device does not include the self-

checking redundant circuitry necessary to allow its use in personnel safety

applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or

de-energized sensor output condiꢀon.

Models

Sensing Mode

Range

LED

Output

T183E

T18AW3R

Opposed

20 m (66 ꢂ)

T18RW3R

Infrared, 950 nm

T18AW3L

Retroreꢃecꢀve with Gain Control

Polarized Retroreꢃecꢀve

T18RW3L

2 m (79 in)

T18AW3LP

T18RW3LP

T18AW3D

T18RW3D

Visible Red, 680 nm

Diﬀuse with Gain Control

300 mm (12 in)

25 mm (1 in) Cutoﬀ

50 mm (2 in) Cutoﬀ

100 mm (4 in) Cutoﬀ

T18AW3FF25

T18RW3FF25

T18AW3FF50

T18RW3FF50

T18AW3FF100

T18RW3FF100

Infrared, 880 nm

Fixed Field

Wiring

Cabled Emiꢁers

All Other Cabled Models

Key

1. Brown

2. White

3. Blue

4. Black

20-250 V ac

−

20-250 V ac

−

Load

Standard 2 m (6.5 ꢂ) cable models are listed.

•

To order the 9 m (30 ꢂ) cable models, add suﬃx W/30 (for example, T183E W/30).

To order the 4-pin Micro-style QD models, add suﬃx Q1 (for example, T183EQ1). A model with a QD connector requires a maꢀng cable.

Use polarized models when shiny objects will be sensed.

Original Document

116164 Rev. C

18 October 2017

116164

T18 Series Sensors (AC Voltage)

4-pin Micro-style QD Emiꢁers

All Other Micro-style QD Models

rd/bk

rd/wh

20-250 V ac

rd/wh

20-250 V ac

Load

No Connection

Dimensions

Cabled Models

QD Models

Jam Nut

(Supplied)

M18 x 1

Thread

ø 40.0 mm

(1.57")

30.0 mm

(1.18")

ø 40.0 mm

(1.57")

ø 15 mm

(0.59")

Green LED

Power Indicator

Yellow LED

Output Indicator

Single-turn

Sensitivity (Gain) Control

(D and L Models)

66.5 mm

(2.62")

51.5 mm

(2.03")

11.5 mm

(0.45")

Speciꢂcaꢀons

Supply Voltage and Current

20 to 250 V ac (50/60 Hz)

Average current: 20 mA

Output Response Time

Opposed mode models: 16 ms ON, 8 ms OFF

Other models: 16 ms ON and OFF

Peak current: 200 mA at 20 V ac, 500 mA at 120 V ac, 750 mA at 250 V ac

NOTE: 100 ms delay on power-up

Supply Protecꢀon Circuitry

Repeatability

Protected against reverse polarity and transient voltages

Opposed mode models: 2 ms

Other models: 4 ms

Output Conꢂguraꢀon

Repeatability and response are independent of signal strength.

SPST solid-state ac switch; Three-wire connecꢀons; Choose light operate or

Adjustments

dark operate models

Light Operate: Output conducts when sensor sees its own (or the emiꢄer’s)

modulated light

Non-polarized retroreꢃecꢀve and diﬀuse models (only) have a single-turn rear-

panel sensiꢀvity control (turn clockwise to increase gain)

Dark Operate: Output conducts when the sensor sees dark

Indicators

Output Raꢀng

Two LEDs (green and amber)

300 mA maximum (conꢀnuous)

Green on: power to sensor is on

Fixed-ꢁeld models: derate 5 mA/°C above +50 °C (+122 °F)

Inrush Capability 1 amp for 20 milliseconds, non-repeꢀꢀve

OFF-state leakage current: < 100 microamps

ON-state saturaꢀon voltage: 3 V at 300 mA ac; 2 V at 15 mA ac

Amber on: sensor sees light

Amber ꢃashing: excess gain marginal (1 to 1.5×) in light condiꢀon

Construcꢀon

Housing: PBT polyester housing

Lens: polycarbonate (opposed-mode) or acrylic (other models)

Output Protecꢀon Circuitry

Protected against false pulse on power-up

Connecꢀons

2 m (6.5 ꢂ) integral cable; 9 m (30 ꢂ) integral cable; or 4-pin Micro-style quick-

disconnect ꢁꢅng

www.bannerengineering.com - Tel: +1-763-544-3164

P/N 116164 Rev. C

T18 Series Sensors (AC Voltage)

Environmental Raꢀng

Required Overcurrent Protecꢀon

Leakproof design rated NEMA 6P and IEC IP67 per IEC 60529

IP69K per DIN40050 for quick disconnect and cable models when the cables

are protected from direct spray

WARNING: Electrical connecꢀons must be made

by qualiꢁed personnel in accordance with local

and naꢀonal electrical codes and regulaꢀons.

Operaꢀng Condiꢀons

−40 °C to +70 °C (−40 °F to +158 °F)

Overcurrent protecꢀon is required to be provided by end product applicaꢀon

per the supplied table.

90% at +50 °C maximum relaꢀve humidity (non-condensing)

Overcurrent protecꢀon may be provided with external fusing or via Current

Limiꢀng, Class 2 Power Supply.

Vibraꢀon and Mechanical Shock

All models meet Mil. Std. 202F requirements. Method 201A (Vibraꢀon;

frequency 10 Hz to 60 Hz, max., double amplitude 0.06 inch acceleraꢀon 10G).

Method 213B condiꢀons H&I.

Supply wiring leads < 24 AWG shall not be spliced.

For addiꢀonal product support, go to hꢀp://www.bannerengineering.com.

Shock: 75G with unit operaꢀng; 100G for non-operaꢀon

Supply Wiring (AWG)

Required Overcurrent Protecꢀon (Amps)

Cerꢀꢂcaꢀons

5.0

3.0

2.0

1.0

0.8

0.5

Accessories

4-Pin Micro-Style Cordsets

Model

Length

Style

Dimensions

Pinout (Female)

MQAC-406

MQAC-415

1.83 m (6 ꢂ)

4.57 m (15 ꢂ)

42 Typ.

Straight

1/2-20 UNF-28

ø 14.5

MQAC-430

9.14 m (30 ꢂ)

MQAC-406RA

MQAC-415RA

1.83 m (6 ꢂ)

32 Typ

4.57 m (15 ꢂ)

1 = Red/Black

2 = Red/White

3 = Red

28 Typ

Right-Angle

4 = Green

MQAC-430RA

9.14 m (30 ꢂ)

1/2-20 UNF-28

ø 14.5

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover

damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY

OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT

DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the

product is idenꢀꢁed as not intended for such purposes will void the product warranty. Any modiꢁcaꢀons to this product without prior express approval by Banner Engineering Corp will void the

product warranꢀes. All speciꢁcaꢀons published in this document are subject to change; Banner reserves the right to modify product speciꢁcaꢀons or update documentaꢀon at any ꢀme.

Speciꢁcaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:

www.bannerengineering.com.

相关型号：