T18RW3FF100 [BANNER]
T18 Series Sensors (AC Voltage);型号: | T18RW3FF100 |
厂家: | Banner Engineering |
描述: | T18 Series Sensors (AC Voltage) |
文件: | 总3页 (文件大小:329K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
T18 Series Sensors (AC Voltage)
Datasheet
For complete technical informaꢀon about this product, including dimensions, accessories, and speciꢁcaꢀons, see hꢀp://
www.bannerengineering.com and search for your model number. See also document 121525.
WARNING: Not To Be Used for Personnel Protecꢀon
Never use this device as a sensing device for personnel protecꢀon. Doing so
could lead to serious injury or death. This device does not include the self-
checking redundant circuitry necessary to allow its use in personnel safety
applicaꢀons. A sensor failure or malfuncꢀon can cause either an energized or
de-energized sensor output condiꢀon.
Models
1
Models
Sensing Mode
Range
LED
Output
-
T183E
T18AW3R
Opposed
20 m (66 ꢂ)
LO
T18RW3R
Infrared, 950 nm
DO
LO
T18AW3L
Retroreꢃecꢀve with Gain Control
Polarized Retroreꢃecꢀve
T18RW3L
DO
LO
2
2 m (79 in)
T18AW3LP
T18RW3LP
T18AW3D
T18RW3D
Visible Red, 680 nm
DO
LO
Diffuse with Gain Control
300 mm (12 in)
25 mm (1 in) Cutoff
50 mm (2 in) Cutoff
100 mm (4 in) Cutoff
DO
LO
T18AW3FF25
T18RW3FF25
T18AW3FF50
T18RW3FF50
T18AW3FF100
T18RW3FF100
DO
LO
Infrared, 880 nm
Fixed Field
DO
LO
DO
Wiring
Cabled Emiꢁers
All Other Cabled Models
Key
1. Brown
1
3
2. White
3. Blue
4. Black
+
1
3
+
20-250 V ac
−
20-250 V ac
−
4
Load
1
Standard 2 m (6.5 ꢂ) cable models are listed.
•
•
To order the 9 m (30 ꢂ) cable models, add suffix W/30 (for example, T183E W/30).
To order the 4-pin Micro-style QD models, add suffix Q1 (for example, T183EQ1). A model with a QD connector requires a maꢀng cable.
2
Use polarized models when shiny objects will be sensed.
Original Document
116164 Rev. C
18 October 2017
116164
T18 Series Sensors (AC Voltage)
4-pin Micro-style QD Emiꢁers
All Other Micro-style QD Models
rd/bk
rd/bk
rd/wh
20-250 V ac
rd/wh
20-250 V ac
rd
rd
Load
No Connection
gn
gn
No Connection
Dimensions
Cabled Models
QD Models
Jam Nut
(Supplied)
M18 x 1
Thread
ø 40.0 mm
(1.57")
30.0 mm
(1.18")
ø 40.0 mm
(1.57")
ø 15 mm
(0.59")
Green LED
Power Indicator
Yellow LED
Output Indicator
Single-turn
Sensitivity (Gain) Control
(D and L Models)
66.5 mm
(2.62")
51.5 mm
(2.03")
11.5 mm
(0.45")
Speciꢂcaꢀons
Supply Voltage and Current
20 to 250 V ac (50/60 Hz)
Average current: 20 mA
Output Response Time
Opposed mode models: 16 ms ON, 8 ms OFF
Other models: 16 ms ON and OFF
Peak current: 200 mA at 20 V ac, 500 mA at 120 V ac, 750 mA at 250 V ac
NOTE: 100 ms delay on power-up
Supply Protecꢀon Circuitry
Repeatability
Protected against reverse polarity and transient voltages
Opposed mode models: 2 ms
Other models: 4 ms
Output Conꢂguraꢀon
Repeatability and response are independent of signal strength.
SPST solid-state ac switch; Three-wire connecꢀons; Choose light operate or
Adjustments
dark operate models
Light Operate: Output conducts when sensor sees its own (or the emiꢄer’s)
modulated light
Non-polarized retroreꢃecꢀve and diffuse models (only) have a single-turn rear-
panel sensiꢀvity control (turn clockwise to increase gain)
Dark Operate: Output conducts when the sensor sees dark
Indicators
Output Raꢀng
Two LEDs (green and amber)
300 mA maximum (conꢀnuous)
Green on: power to sensor is on
Fixed-ꢁeld models: derate 5 mA/°C above +50 °C (+122 °F)
Inrush Capability 1 amp for 20 milliseconds, non-repeꢀꢀve
OFF-state leakage current: < 100 microamps
ON-state saturaꢀon voltage: 3 V at 300 mA ac; 2 V at 15 mA ac
Amber on: sensor sees light
Amber ꢃashing: excess gain marginal (1 to 1.5×) in light condiꢀon
Construcꢀon
Housing: PBT polyester housing
Lens: polycarbonate (opposed-mode) or acrylic (other models)
Output Protecꢀon Circuitry
Protected against false pulse on power-up
Connecꢀons
2 m (6.5 ꢂ) integral cable; 9 m (30 ꢂ) integral cable; or 4-pin Micro-style quick-
disconnect ꢁꢅng
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 116164 Rev. C
T18 Series Sensors (AC Voltage)
Environmental Raꢀng
Required Overcurrent Protecꢀon
Leakproof design rated NEMA 6P and IEC IP67 per IEC 60529
IP69K per DIN40050 for quick disconnect and cable models when the cables
are protected from direct spray
WARNING: Electrical connecꢀons must be made
by qualiꢁed personnel in accordance with local
and naꢀonal electrical codes and regulaꢀons.
Operaꢀng Condiꢀons
−40 °C to +70 °C (−40 °F to +158 °F)
Overcurrent protecꢀon is required to be provided by end product applicaꢀon
per the supplied table.
90% at +50 °C maximum relaꢀve humidity (non-condensing)
Overcurrent protecꢀon may be provided with external fusing or via Current
Limiꢀng, Class 2 Power Supply.
Vibraꢀon and Mechanical Shock
All models meet Mil. Std. 202F requirements. Method 201A (Vibraꢀon;
frequency 10 Hz to 60 Hz, max., double amplitude 0.06 inch acceleraꢀon 10G).
Method 213B condiꢀons H&I.
Supply wiring leads < 24 AWG shall not be spliced.
For addiꢀonal product support, go to hꢀp://www.bannerengineering.com.
Shock: 75G with unit operaꢀng; 100G for non-operaꢀon
Supply Wiring (AWG)
Required Overcurrent Protecꢀon (Amps)
Cerꢀꢂcaꢀons
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Accessories
4-Pin Micro-Style Cordsets
Model
Length
Style
Dimensions
Pinout (Female)
MQAC-406
MQAC-415
1.83 m (6 ꢂ)
4.57 m (15 ꢂ)
42 Typ.
Straight
1/2-20 UNF-28
ø 14.5
MQAC-430
9.14 m (30 ꢂ)
4
3
1
MQAC-406RA
MQAC-415RA
1.83 m (6 ꢂ)
2
32 Typ
4.57 m (15 ꢂ)
1 = Red/Black
2 = Red/White
3 = Red
28 Typ
Right-Angle
4 = Green
MQAC-430RA
9.14 m (30 ꢂ)
1/2-20 UNF-28
ø 14.5
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the ꢀme it is returned to the factory, is found to have been defecꢀve during the warranty period. This warranty does not cover
damage or liability for misuse, abuse, or the improper applicaꢀon or installaꢀon of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discreꢀon of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY
OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT
DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligaꢀons or liabiliꢀes relaꢀng to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper applicaꢀon or installaꢀon of this product or use of the product for personal protecꢀon applicaꢀons when the
product is idenꢀꢁed as not intended for such purposes will void the product warranty. Any modiꢁcaꢀons to this product without prior express approval by Banner Engineering Corp will void the
product warranꢀes. All speciꢁcaꢀons published in this document are subject to change; Banner reserves the right to modify product speciꢁcaꢀons or update documentaꢀon at any ꢀme.
Speciꢁcaꢀons and product informaꢀon in English supersede that which is provided in any other language. For the most recent version of any documentaꢀon, refer to:
www.bannerengineering.com.
©
Banner Engineering Corp. All rights reserved
相关型号:
T18T
RESISTOR, TRIMMER, CERMET, 18 TURN(S), 0.031 - 0.75 W, 10 ohm - 2000000 ohm, 3/4 INCH, RECTANGULAR, 3 PINS
VISHAY
©2020 ICPDF网 联系我们和版权申明