TL50A [BANNER]

TL50A Audible Indicators;


型号：	TL50A
厂家：	Banner Engineering
描述：	TL50A Audible Indicators
文件：	总5页 (文件大小：511K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TL50A Audible Indicators

Datasheet

General-Purpose Audible Indicators

•

Rugged, cost-effective and easy to install

Compact devices are self-contained, no controller needed

Immune to EMI and RFI interference

Choose IEC IP50 or Sealed IEC IP67 model, black or light gray housing

12 V dc to 30 V dc, or 24 V ac operation

Models

Standard Audible Models

Connection

Inputs

TL50AQ

Integral 4-pin M12/Euro-style quick disconnect

Bimodal (NPN or PNP)

Sealed Audible Models

Connection

Inputs

Continuous

TL50ALSQ

Pulsed at 1.6 Hz

TL50ALS3Q

Staccato

TL50ALS4Q

Integral 4-pin M12/Euro-style quick disconnect

Bimodal (NPN or PNP)

Omni-Directional Sealed Audible Models

Pulsed at 1.6 Hz

Connection

Inputs

Continuous

TL50AOSQ

Staccato

TL50AOS4Q

TL50AOS3Q

Integral 4-pin M12/Euro-style quick disconnect

Bimodal (NPN or PNP)

Omni-Directional Sealed Audible Models with Intensity Adjustment

Connection

Inputs

Continuous

TL50AOSIQ

Pulsed at 1.6 Hz

Staccato

TL50AOS4IQ

TL50AOS3IQ

Integral 4-pin M12/Euro-style quick disconnect

Bimodal (NPN or PNP)

Wiring Diagrams

PNP Input

NPN Input

Key

1 = Brown

2 = White

3 = Blue

4 = Black

12-30V dc

or 24V ac

12-30V dc

or 24V ac

No Connection

Models with black housing are listed. For gray housing, add the sufﬁx "C" at the end of the cabled model number or before the "Q" in quick disconnect model numbers. For

example, TL50AC or TL50ACQ.

Integral quick disconnect models are listed.

•

To order the 150 mm (6 in) PVC cable model with a M12/Euro-style quick disconnect, replace the sufﬁx "Q" with "QP" in the model number. For example, TL50AQP.

To order the 2 m (6.5 ft) PVC cable model, omit the sufﬁx "Q" in the model number. For example, TL50A.

Models with a quick disconnect require a mating cordset.

Original Document

155019 Rev. J

7 May 2019

155019

TL50A Audible Indicators

Speciﬁcations

Supply Voltage and Current

Required Overcurrent Protection

WARNING: Electrical connections must be made by

qualiﬁed personnel in accordance with local and

12 V dc to 30 V dc; or 24 V ac ( 3 V ac) at 50 Hz to 60 Hz

Standard Audible Alarm: 25 mA maximum current

Sealed Audible Alarm: 35 mA maximum current

Omni-Directional Sealed Audible Alarm: 45 mA maximum current

national electrical codes and regulations.

Audible Alarm

Standard Audible Alarm: 2.7 kHz 500 Hz oscillation frequency; maximum intensity 92

dB at 1 m (3.3 ft) (typical)

Sealed Audible Alarm: 2.9 kHz 250 Hz oscillation frequency; maximum intensity 94

dB at 1m (3.3 ft) (typical)

Overcurrent protection is required to be provided by end product application per the

supplied table.

Overcurrent protection may be provided with external fusing or via Current Limiting,

Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to www.bannerengineering.com.

Omni-Directional Sealed Audible Alarm: 2.1 kHz 250 Hz oscillation frequency;

maximum intensity 99 dB at 1 m (3.3 ft) (typical)

Audible Adjustment

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to adjust the

audible intensity (do not exceed 1.5 turns or the cover may detach during operation).

For maximum intensity, rotate the center plug 180° counterclockwise to remove it.

Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with Intensity

Adjustment: Rotate the front cover until the desired intensity is reached.

Typical Reduction in Sound Intensity with Audible Adjustment (maximum to minimum):

5.0

3.0

2.0

1.0

0.8

0.5

•

Standard Audible Alarm: 30 dB

Sealed Audible Alarm: 20 dB

Omni-Directional Sealed Audible Alarm: 12 dB

Connections

Integral 4-pin M12/Euro-style quick disconnect, 150 mm (6 in) PVC cable with a M12/

Euro-style quick disconnect, or 2 m (6.5 ft) integral PVC cable, depending on model

Models with a quick disconnect require a mating cordset

Certiﬁcations

Vibration and Mechanical Shock

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm amplitude, 5

minutes sweep, 30 minutes dwell)

Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine wave)

Operating Conditions

–20 °C to +50 °C (–4 °F to +122 °F)

95% at +50 °C maximum relative humidity (non-condensing)

Environmental Rating

UL Type 4X Indoor and UL Type 13

Standard models: IEC IP50

Sealed models: IEC IP67

Dimensions

Standard Audible Models

Sealed Audible Models

Omni-Directional Models

93.4

[3.68]

107.5

[4.23]

26.9

[1.06]

111

[4.37]

▲

[0.75]

19.0

[0.75]

M30 X 1.5

[0.75]

M30 X 1.5-6 g

45.0

[1.77]

M12 X 1-6 g

ø45

[1.77]

ø50

[1.97]

1/2-14 NPSM

ø50

[1.97]

1/2-14 NPSM

ø50

[1.97]

All measurements are listed in millimeters [inches], unless noted otherwise.

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 155019 Rev. J

TL50A Audible Indicators

Accessories

Cordsets

4-Pin Threaded M12/Euro-Style Cordsets—Single Ended

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406

MQDC-415

MQDC-430

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

44 Typ.

Straight

M12 x 1

MQDC-450

15.2 m (50 ft)

ø 14.5

MQDC-406RA

MQDC-415RA

MQDC-430RA

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

30 Typ.

[1.18"]

Right-Angle

4 = Black

MQDC-450RA

15.2 m (50 ft)

M12 x 1

ø 14.5 [0.57"]

Mounting Brackets

All measurements are listed in millimeters [inches], unless noted otherwise.

83.2

SMB30A

•

SMB30FA

•

Right-angle bracket with curved slot

for versatile orientation

Clearance for M6 (¼ in) hardware

Mounting hole for 30 mm sensor

12-ga. stainless steel

Swivel bracket with tilt and pan

movement for precise adjustment

Mounting hole for 30 mm sensor

12-ga. 304 stainless steel

Easy sensor mounting to extrude rail

T-slot

Metric and inch size bolt available

•

68.9

36.3

•

Hole center spacing: A to B=40

Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5

Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50

Hole size: B= ø 30.1

SMB30MM

SMBAMS30P

•

12-ga. stainless steel bracket with

curved mounting slots for versatile

orientation

Clearance for M6 (¼ in) hardware

Mounting hole for 30 mm sensor

•

Flat SMBAMS series bracket

30 mm hole for mounting sensors

Articulation slots for 90°+ rotation

12-ga. 300 series stainless steel

•

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

SMBAMS30RA

SMB30SC

•

Right-angle SMBAMS series bracket

30 mm hole for mounting sensors

Articulation slots for 90°+ rotation

12-ga. (2.6 mm) cold-rolled steel

•

Swivel bracket with 30 mm mounting

hole for sensor

Black reinforced thermoplastic

polyester

Stainless steel mounting and swivel

locking hardware included

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

P/N 155019 Rev. J

www.bannerengineering.com - Tel: + 1 888 373 6767

TL50A Audible Indicators

LMBE12RA35

LMBE12RA45

•

Direct mounting of stand-off pipe, with common

•

Direct mounting of stand-off pipe, with common

bracket type

38.25

bracket type

38.25

•

Zinc-plated steel

•

Zinc-plated steel

1/2-14 NPSM nut

Mounting distance from the wall to the center of

the 1/2-14 NPSM nut is 35 mm

Mounting distance from the wall to the center of

the 1/2-14 NPSM nut is 45 mm

1/2 - 14

NPSM NUT

1/2 - 14

NPSM NUT

Hole center spacing: 20.0

Hole center spacing: 35.0

2X Ø9

2X Ø11

Pipe Mounting Flange

Model

Features

Construction

1/2-14

NPSM

4x ø5.5

•

Elevated-use stand-off pipes (½ in, NPSM/

DN15)

Die-cast zinc base with black

paint

SA-F12

ø28

ø70

M5 mounting hardware and nitrile gasket

included

ø40

•

Elevated-use stand-off pipes (½ in, NPSM/

1/2-14 NPSM

2 x 120°

DN15)

SA-F12-3

Black Polycarbonate

M4 mounting hardware and nitrile blend gasket

included

8.77

ø60

LMB Sealed Right-Angle Bracket

Model

Description

Construction

LMB30RA

Black polycarbonate

Direct-Mount Models: Bracket kit with base, 30 mm adapter,

set screw, fasteners, O-rings, and gaskets.

LMB30RAC

LMBE12RA

LMBE12RAC

Gray polycarbonate

Black polycarbonate

Gray polycarbonate

Pipe-Mount Models: Bracket kit with base, ½-14 pipe adapter,

set screw, fasteners, O-rings, and gaskets. For use with

stand-off pipe (listed and sold separately).

Elevated Mount System

Model

Features

Components

SA-M30TE12 - Black Acetal

•

Streamlined black acetal or white UHMW stand-off pipe

adapter/cover

Connects between 30 mm light base and ½ in. NPSM/DN15

SA-M30TE12C - White UHMW

pipe

Mounting hardware included

Polished 304 Stainless Steel Black Anodized Aluminum

Clear Anodized Aluminum

SOP-E12-150SS

150 mm (6 in) long

SOP-E12-150A

150 mm (6 in) long

SOP-E12-150AC

150 mm (6 in) long

•

Elevated-use stand-off pipe (½ in. NPSM/DN15)

Polished 304 stainless steel, black anodized aluminum, or

clear anodized aluminum surface

SOP-E12-300SS

300 mm (12 in) long

SOP-E12-300A

300 mm (12 in) long

SOP-E12-300AC

300 mm (12 in) long

•

½ in. NPT thread at both ends

Compatible with most industrial environments

SOP-E12-900SS

900 mm (36 in) long

SOP-E12-900A

900 mm (36 in) long

SOP-E12-900AC

900 mm (36 in) long

SA-E12M30 - Black Acetal

•

Streamlined black acetal or white UHMW mounting base

adapter/cover

Connects between ½ in. NPSM/DN15 pipe and 30 mm

(1-3/16 in) drilled hole

SA-E12M30C - White UHMW

Mounting hardware included

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 155019 Rev. J

TL50A Audible Indicators

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,

any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the

improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER

PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR

FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner

Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identiﬁed as not intended for such

purposes will void the product warranty. Any modiﬁcations to this product without prior express approval by Banner Engineering Corp will void the product warranties. All speciﬁcations published in this

document are subject to change; Banner reserves the right to modify product speciﬁcations or update documentation at any time. Speciﬁcations and product information in English supersede that which is

provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

TL50A [BANNER]

相关型号：

TL50ALS3Q

TL50ALS4Q

TL50ALSQ

TL50AOS3IQ

TL50AOS4IQ

TL50AOSIQ

TL50AQ

TL50BGYRALS3Q

TL50BGYRALS4Q

TL50BGYRALSQ

TL50BGYRAOS3IQ

TL50BGYRAOS3Q