TL50BLZRALS [BANNER]

TL50BLZ Beacon Universal AC Voltage Tower Light;


型号：	TL50BLZRALS
厂家：	Banner Engineering
描述：	TL50BLZ Beacon Universal AC Voltage Tower Light
文件：	总6页 (文件大小：843K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TL50BLZ Beacon Universal AC Voltage Tower

Light

Datasheet

Multi-Color General-Purpose or Audible Indicators

The TL50 Beacon Tower Light is a cross between the TL50 tower light and the K50 beacon.

This compact design is extremely intense and can even be used in areas with high levels of

ambient light.

•

Rugged, cost-effective, and easy-to-install multi-segment indicators

Illuminated segments provide easy-to-see operator guidance and indication of

equipment status

•

Displays up to 5 colors

Steady on, ﬂashing, and rotating models available

Available in black or light gray housing

Audible models available with standard, sealed, or omni-directional audible element

Continuous, pulsed, and staccato tones available

100 V ac to 240 V ac operation

No assembly required

Non-Audible Models

Connection

Model

# of LED Colors

LED Colors

Inputs

TL50BLZR

Red

TL50BLZGR

Green, Red

4-wire PVC cable

TL50BLZGYR

TL50BLZBGYR

TL50BLZWBGYR

Green, Yellow, Red

100 V ac to 240 V ac

Blue, Green, Yellow, Red

5-wire PVC cable

6-wire PVC cable

White, Blue, Green, Yellow, Red

Audible Models

# of LED

Colors

Standard Audible Model

LED Colors

Connection

Inputs

TL50BLZRA

Red

Green, Red

4-wire PVC cable

TL50BLZGRA

TL50BLZGYRA

TL50BLZBGYRA

100 V ac to

240 V ac

Green, Yellow, Red

5-wire PVC cable

6-wire PVC cable

Blue, Green, Yellow, Red

Sealed Audible Model

Pulsed at 1.6 Hz

# of LED

Colors

LED Colors

Connection

Inputs

Continuous

Staccato

TL50BLZRALS

TL50BLZRALS3

TL50BLZRALS4

Red

4-wire PVC cable

TL50BLZGRALS

TL50BLZGYRALS

TL50BLZBGYRALS

TL50BLZGRALS3

TL50BLZGYRALS3

TL50BLZBGYRALS3

TL50BLZGRALS4

TL50BLZGYRALS4

TL50BLZBGYRALS4

Green, Red

100 V ac to

240 V ac

Green, Yellow, Red

Blue, Green, Yellow, Red

5-wire PVC cable

6-wire PVC cable

Models with black housing are listed. For gray housing, add the sufﬁx "C" at the end of the cabled model number or before the "QP" in

150 mm (6 in) PVC cable model numbers. For example, TL50BLZRC or TL50BLZRCQP.

The ﬁrst color listed is the bottom color, going up in successive order. Four color options are only available in audible cabled models. Five

color options are only available in non-audible cabled models.

•

To order the 150 mm (6 in) PVC cable model, add the sufﬁx "QP" to the model number.

•

Models with a quick disconnect require a mating cordset.

Original Document

169423 Rev. K

6 May 2019

169423

TL50BLZ Beacon Universal AC Voltage Tower Light

Omni-Directional Sealed Audible Model

Pulsed at 1.6 Hz

# of LED

Colors

LED Colors

Connection

Inputs

Continuous

Staccato

TL50BLZRAOS

TL50BLZRAOS3

TL50BLZRAOS4

Red

4-wire PVC cable

TL50BLZGRAOS

TL50BLZGYRAOS

TL50BLZBGYRAOS

TL50BLZGRAOS3

TL50BLZGYRAOS3

TL50BLZBGYRAOS3

TL50BLZGRAOS4

TL50BLZGYRAOS4

TL50BLZBGYRAOS4

Green, Red

100 V ac to

240 V ac

Green, Yellow, Red

5-wire PVC cable

6-wire PVC cable

Blue, Green, Yellow, Red

Omni-Directional Sealed Audible Model with Intensity Adjustment

# of LED

Colors

LED Colors

Connection

Inputs

Continuous

Pulsed at 1.6 Hz

Staccato

TL50BLZRAOSI

TL50BLZRAOS3I

TL50BLZRAOS4I

Red

4-wire PVC cable

TL50BLZGRAOSI

TL50BLZGYRAOSI

TL50BLZBGYRAOSI

TL50BLZGRAOS3I

TL50BLZGYRAOS3I

TL50BLZBGYRAOS3I

TL50BLZGRAOS4I

TL50BLZGYRAOS4I

TL50BLZBGYRAOS4I

Green, Red

100 V ac to

240 V ac

Green, Yellow, Red

Blue, Green, Yellow, Red

5-wire PVC cable

6-wire PVC cable

Note: See Banner Engineering catalog or www.bannerengineering.com for additional models and complete

information.

Wiring Diagrams

Models with 1 to 3 Segments

4-Wire

Models with 4 Segments

5-Wire

Models with 5 Segments

6-Wire

Indicator

Color

Indicator

Neutral

100-240V ac

Hot

Neutral

Color

100-240V ac

Hot

100-240V ac

Hot

C2/A

C3/A

C4/A

C5/A

4-Wire Key:

1 = Brown

5-Wire Key:

6-Wire Key:

1 = Brown

2 = Blue

3 = White

4 = Black

5 = Gray

1 = Brown

2 = Blue

3 = White

4 = Black

5 = Gray

6 = Red

C1 = Color 1

C2 = Color 2

C3 = Color 3

A = Audible

C1 = Color 1

C2 = Color 2

C3 = Color 3

C4 = Color 4

A = Audible

C1 = Color 1

C2 = Color 2

C3 = Color 3

C4 = Color 4

C5 = Color 5

A = Audible

2 = Blue

3 = Black

4 = White

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 169423 Rev. K

TL50BLZ Beacon Universal AC Voltage Tower Light

Speciﬁcations

Supply Voltage and Current

100 V ac to 240 V ac at 50 Hz or 60 Hz

Indicators—maximum current per LED color:

Indicators

LEDs are independently selectedꢀ 1 to 5 colors depending on model

Indicator Characteristics

•

55 mA at 100 V ac

50 mA at 120 V ac

35 mA at 240 V ac

Dominant Wavelength (nm) or

Color Temperature (CCT)

Lumen Output (Typical

at 25 °C)

Color

Standard Audible Alarm: 30 mA maximum current

Sealed Audible Alarm: 30 mA maximum current

Omni-Directional Sealed Audible Alarm: 35 mA maximum current

Green

Red

525 nm

626 nm

590 nm

470 nm

5000 K

Supply Protection Circuitry

Protected against transient voltages

Yellow

Blue

Input Response Time

Indicator On/Off: 500 milliseconds maximum

White

Leakage Current Immunity

Indicator Functions

500 µA

Application Note: The use of relay output PLC is recommended since there

is no leakage current. Solid state output PLCs often have leakage current

above 1 mA and, therefore, turn the light on in the off state. To counteract

the leakage current, a shunt resistor must be used. A resistor must be

applied from the neutral wire of the device to the hot wire of each channel of

the device.

A color designation followed by an LED option number, indicates the LED

status. For example: TL50BLZR2Q, or TL50BLZG1RQ.

LED Option

LED Status

Rotation or Flash Rate

Blank

Steady On

Rotating

Flashing

–

Audible Alarm

200 RPM 15ꢁ

1.6 Hz rate 15ꢁ

Standard Audible Alarm: 2.7 kHz 500 Hz oscillation frequencyꢀ maximum

intensity 92 dB at 1 m (3.3 ft) (typical)

Sealed Audible Alarm: 2.9 kHz 250 Hz oscillation frequencyꢀ maximum

intensity 94 dB at 1 m (3.3 ft) (typical)

Omni-Directional Sealed Audible Alarm: 2.1 kHz 250 Hz oscillation

frequencyꢀ maximum intensity 99 dB at 1 m (3.3 ft) (typical)

Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 kHz

250 Hz oscillation frequencyꢀ maximum intensity 95 dB at 1 m (3.3 ft)

(typical)

Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 kHz

250 Hz oscillation frequencyꢀ maximum intensity 95 dB at 1 m (3.3 ft)

(typical)

Operating Conditions

Non-Audible: –40 °C to +50 °C (–40 °F to +122 °F)

Standard and Sealed Audible: –20 °C to +50 °C (–4 °F to +122 °F)

95ꢁ at +50 °C maximum relative humidity (non-condensing)

Environmental Rating

UL Type 4X Indoor and UL Type 13

Non-Audible and Sealed Audible: IEC IP67

Standard Audible: IEC IP50

Typical Reduction in Sound Intensity with Audible Adjustment (maximum to

minimum)

Required Overcurrent Protection

•

Standard Audible: 30 dB

Sealed Audible: 20 dB

Omni-Directional Sealed Audible: 12 dB

WARNING: Electrical connections must be

made by qualiﬁed personnel in accordance with

local and national electrical codes and

regulations.

Audible Adjustment

Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to

adjust the audible intensity. (Do not exceed 1.5 turns or the cover may

detach during operation.) For maximum intensity, rotate the center plug

180° counterclockwise to remove it.

Overcurrent protection is required to be provided by end product

application per the supplied table.

Overcurrent protection may be provided with external fusing or via Current

Limiting, Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to www.bannerengineering.com.

Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with

Intensity Adjustment: Rotate the front cover until the desired intensity is

reached.

Omni-Directional Sealed Audible Alarm: No adjustment.

Connections

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

4-wire, 5-wire, or 6-wire 2 m (6.5 ft) integral cableꢀ 4-pin or 5-pin 150 mm (6

in) PVC cable with a M12/Euro-style quick disconnect, depending on model

Models with a quick disconnect require a mating cordset

5.0

3.0

2.0

1.0

0.8

0.5

Construction

Bases and Covers: ABS

Light Segment: Polycarbonate

Vibration and Mechanical Shock

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm

amplitude, 5 minutes sweep, 30 minutes dwell)

Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine

wave)

Certiﬁcations

P/N 169423 Rev. K

www.bannerengineering.com - Tel: + 1 888 373 6767

TL50BLZ Beacon Universal AC Voltage Tower Light

Dimensions

Tower Height (H)

# of

5x 12

[0.47]

Omni-Directional

Sealed Audible

Colors

Non-Audible

Standard Audible*

Sealed Audible

115.2 mm (4.5 in)

141.0 mm (5.6 in)

166.8 mm (6.6 in)

192.6 mm (7.6 in)

218.4 mm (8.6 in)

146.1 mm 5.8 in)

171.9 mm (6.8 in)

197.7 mm (7.8 in)

223.5 mm (8.8 in)

169.2 mm (6.7 in)

195.0 mm (7.7 in)

220.8 mm (8.7 in)

246.6 mm (9.7 in)

183.2 mm (7.2 in)

209.0 mm (8.2 in)

234.8 mm (9.2 in)

260.6 mm (10.3 in)

[0.75]

M30 x 1.5

[1.77]

Ø50

[1.97]

1/2-14 NPSM

* Tower height (H) with top unscrewed approximately 3.5 mm to allow sound to escape

All measurements are listed in millimeters [inches], unless noted otherwise.

Accessories

Cordsets

4-Pin Micro-Style Cordsets—Single Ended

Model

Length

Style

Dimensions

Pinout (Female)

MQAC2-406

MQAC2-415

1.83 m (6 ft)

42 Typ.

4.57 m (15 ft)

Straight

1/2-20 UNF-28

ø 14.5

MQAC2-430

9.14 m (30 ft)

1 = Brown

2 = Blue

3 = Black

4 = White

5-Pin Micro-Style Cordsets

Model

Length

Style

Dimensions

Pinout

MQAC2-506

MQAC2-515

1.83 m (6 ft)

4.57 m (15 ft)

42 Typ.

Straight

1/2-20 UNF-28

ø 14.5

MQAC2-530

9.14 m (30 ft)

1 = Brown

2 = Blue

3 = White

4 = Black

5 = Gray

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 169423 Rev. K

TL50BLZ Beacon Universal AC Voltage Tower Light

Mounting Brackets

All measurements are listed in millimeters [inches], unless noted otherwise.

SMB30A

•

SMB30FA

•

83.2

Right-angle bracket with curved

slot for versatile orientation

Clearance for M6 (¼ in)

hardware

Mounting hole for 30 mm sensor

12-ga. stainless steel

Swivel bracket with tilt and pan

movement for precise

adjustment

•

Mounting hole for 30 mm sensor

12-ga. 304 stainless steel

Easy sensor mounting to

extrude rail T-slot

•

68.9

36.3

•

Metric and inch size bolt

available

Hole center spacing: A to B=40

Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5

Bolt thread: SMB30FA, A= 3/8 - 16 x 2 inꢀ SMB30FAM10, A= M10 - 1.5 x 50

Hole size: B= ø 30.1

SMB30MM

SMBAMS30P

•

12-ga. stainless steel bracket

with curved mounting slots for

versatile orientation

Clearance for M6 (¼ in)

hardware

•

Flat SMBAMS series bracket

30 mm hole for mounting

sensors

Articulation slots for 90°+

rotation

12-ga. 300 series stainless steel

•

Mounting hole for 30 mm sensor

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

SMBAMS30RA

SMB30SC

•

Right-angle SMBAMS series

bracket

30 mm hole for mounting

sensors

Articulation slots for 90°+

rotation

12-ga. (2.6 mm) cold-rolled steel

•

Swivel bracket with 30 mm

mounting hole for sensor

Black reinforced thermoplastic

polyester

Stainless steel mounting and

swivel locking hardware

included

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

LMBE12RA35

LMBE12RA45

•

Direct mounting of stand-off pipe, with

common bracket type

•

Direct mounting of stand-off pipe, with

38.25

common bracket type

Zinc-plated steel

•

Zinc-plated steel

•

1/2-14 NPSM nut

1/2 - 14

NPSM NUT

1/2 - 14

NPSM NUT

Mounting distance from the wall to the

center of the 1/2-14 NPSM nut is 45 mm

center of the 1/2-14 NPSM nut is 35 mm

2X Ø9

2X Ø11

Hole center spacing: 20.0

Hole center spacing: 35.0

LMB Sealed Right-Angle Bracket

Model

Description

Construction

LMB30RA

Black polycarbonate

Direct-Mount Models: Bracket kit with base, 30 mm

adapter, set screw, fasteners, O-rings, and gaskets.

LMB30RAC

LMBE12RA

LMBE12RAC

Gray polycarbonate

Black polycarbonate

Gray polycarbonate

Pipe-Mount Models: Bracket kit with base, ½-14 pipe

adapter, set screw, fasteners, O-rings, and gaskets.

For use with stand-off pipe (listed and sold separately).

P/N 169423 Rev. K

www.bannerengineering.com - Tel: + 1 888 373 6767

TL50BLZ Beacon Universal AC Voltage Tower Light

Elevated Mount System

Model

Features

Components

SA-M30TE12 - Black Acetal

•

Streamlined black acetal or white UHMW stand-off

pipe adapter/cover

Connects between 30 mm light base and ½ in.

NPSM/DN15 pipe

SA-M30TE12C - White UHMW

Mounting hardware included

Polished 304 Stainless

Steel

Black Anodized

Aluminum

Clear Anodized

Aluminum

SOP-E12-150SS

150 mm (6 in) long

SOP-E12-150A

150 mm (6 in) long

SOP-E12-150AC

150 mm (6 in) long

•

Elevated-use stand-off pipe (½ in. NPSM/DN15)

Polished 304 stainless steel, black anodized

aluminum, or clear anodized aluminum surface

½ in. NPT thread at both ends

SOP-E12-300SS

300 mm (12 in) long

SOP-E12-300A

300 mm (12 in) long

SOP-E12-300AC

300 mm (12 in) long

•

Compatible with most industrial environments

SOP-E12-900SS

SOP-E12-900A

SOP-E12-900AC

900 mm (36 in) long

SA-E12M30 - Black Acetal

•

Streamlined black acetal or white UHMW mounting

base adapter/cover

Connects between ½ in. NPSM/DN15 pipe and 30

mm (1-3/16 in) drilled hole

SA-E12M30C - White UHMW

Mounting hardware included

Pipe Mounting Flange

Model

Features

•

Construction

1/2-14

NPSM

Elevated-use stand-off pipes (½ in,

NPSM/DN15)

4x ø5.5

Die-cast zinc base with

black paint

SA-F12

ø28

ø70

•

M5 mounting hardware and nitrile gasket

included

ø40

•

Elevated-use stand-off pipes (½ in,

NPSM/DN15)

1/2-14 NPSM

2 x 120°

SA-F12-3

Black Polycarbonate

M4 mounting hardware and nitrile blend

gasket included

8.77

ø60

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not

cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO

BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES

RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,

STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the

product is identiﬁed as not intended for such purposes will void the product warranty. Any modiﬁcations to this product without prior express approval by Banner Engineering Corp will

void the product warranties. All speciﬁcations published in this document are subject to changeꢀ Banner reserves the right to modify product speciﬁcations or update documentation at

any time. Speciﬁcations and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:

www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

TL50BLZRALS [BANNER]

相关型号：

TL50BLZRALS3

TL50BLZRALS4

TL50BLZRAOS

TL50BLZRAOS3

TL50BLZRAOS3I

TL50BLZRAOS4

TL50BLZRAOS4I

TL50BLZRAOSI

TL50BLZWBGYR

TL50C

TL50CBGYRALS3Q

TL50CBGYRALS4Q