TL50CGYRALS3Q [BANNER]

TL50C Compact Tower Light;


型号：	TL50CGYRALS3Q
厂家：	Banner Engineering
描述：	TL50C Compact Tower Light
文件：	总7页 (文件大小：1019K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

TL50C Compact Tower Light

Datasheet

Multi-Color General-Purpose or Audible Indicators

•

Bright, uniform lighted segments at only half the height of the standard TL50 models

Rugged, cost-effective, and easy-to-install multi-segment indicators

Illuminated segments provide easy-to-see operator guidance and indication of

equipment status

•

Up to 7 stacked colors available

Available in black or light gray housing

Audible models available with standard, sealed, or omni-directional audible element

Compact devices are completely self-contained, no controller needed

12 V dc to 30 V dc or 24 V ac operation

No assembly required

Models

Connection

Non-Audible Models

# of LED Colors

LED Colors

TL50CRQ

Red

TL50CGRQ

Green, Red

Integral 4-pin M12/Euro-style quick disconnect

TL50CGYRQ

TL50CBGYRQ

TL50CWBGYRQ

Green, Yellow, Red

Blue, Green, Yellow, Red

Integral 5-pin M12/Euro-style quick disconnect

Integral 8-pin M12/Euro-style quick disconnect

White, Blue, Green, Yellow, Red

Standard Audible Models

TL50CRAQ

# of LED Colors

LED Colors

Connection

Red

Integral 4-pin M12/Euro-style quick disconnect

Integral 5-pin M12/Euro-style quick disconnect

Integral 8-pin M12/Euro-style quick disconnect

TL50CGRAQ

Green, Red

TL50CGYRAQ

TL50CBGYRAQ

TL50CWBGYRAQ

Green, Yellow, Red

Blue, Green, Yellow, Red

White, Blue, Green, Yellow, Red

Sealed Audible Models

Pulsed at 1.6 Hz

# of LED

Colors

Connection

LED Colors

Continuous

Staccato

TL50CRALSQ

TL50CRALS3Q

TL50CRALS4Q

Red

Integral 4-pin M12/Euro-style

quick disconnect

TL50CGRALSQ

TL50CGRALS3Q

TL50CGRALS4Q

Green, Red

Integral 5-pin M12/Euro-style

quick disconnect

TL50CGYRALSQ

TL50CBGYRALSQ

TL50CGYRALS3Q

TL50CBGYRALS3Q

TL50CGYRALS4Q

Green, Yellow, Red

TL50CBGYRALS4Q

Blue, Green, Yellow, Red

Integral 8-pin M12/Euro-style

quick disconnect

TL50CWBGYRALSQ TL50CWBGYRALS3Q

TL50CWBGYRALS4Q

White, Blue, Green, Yellow, Red

•

Models with black housing are listed. For gray housing, add the sufﬁx "C" at the end of the cabled model number or before the "Q" in quick

disconnect model numbers. For example, TL50CRAC or TL50CRACQ.

•

All models have Bimodal (NPN or PNP) inputs.

The ﬁrst color listed is the bottom color, going up in successive order.

Available colors include: Green (G), Red (R), Yellow (Y), Blue (B), Orange (O), White (W), Turquoise (T), Violet (V), Magenta (M) and Sky Blue (S).

Contact Banner Engineering for other colors and color combinations.

To order the 150 mm (6 in) PVC cable model with a M12/Euro-style quick disconnect, replace the sufﬁx "Q" with "QP" in the model number. For

example, TL50CRAQP.

•

To order the 2 m (6.5 ft) PVC cable model, omit the sufﬁx "Q" in the model number. For example, TL50CRA.

Models with a quick disconnect require a mating cordset.

Original Document

179186 Rev. I

6 May 2019

179186

TL50C Compact Tower Light

Omni-Directional Sealed Audible Models

# of LED

Colors

LED Colors

Connection

Continuous

Pulsed at 1.6 Hz

Staccato

TL50CRAOSQ

TL50CRAOS3Q

TL50CRAOS4Q

Red

Integral 4-pin M12/Euro-

style quick disconnect

TL50CGRAOSQ

TL50CGRAOS3Q

TL50CGRAOS4Q

Green, Red

Integral 5-pin M12/Euro-

style quick disconnect

TL50CGYRAOSQ

TL50CBGYRAOSQ

TL50CGYRAOS3Q

TL50CBGYRAOS3Q

TL50CGYRAOS4Q

Green, Yellow, Red

TL50CBGYRAOS4Q

Blue, Green, Yellow, Red

Integral 8-pin M12/Euro-

style quick disconnect

TL50CWBGYRAOSQ TL50CWBGYRAOS3Q

TL50CWBGYRAOS4Q

White, Blue, Green, Yellow, Red

Omni-Directional Sealed Audible Models with Intensity Adjustment

# of LED

Colors

LED Colors

Connection

Continuous

Pulsed at 1.6 Hz

TL50CRAOS3IQ

Staccato

TL50CRAOSIQ

TL50CRAOS4IQ

Red

Integral 4-pin M12/Euro-

style quick disconnect

TL50CGRAOSIQ

TL50CGRAOS3IQ

TL50CGYRAOS3IQ

TL50CBGYRAOS3IQ

TL50CGRAOS4IQ

Green, Red

Integral 5-pin M12/Euro-

style quick disconnect

TL50CGYRAOSIQ

TL50CBGYRAOSIQ

TL50CGYRAOS4IQ

Green, Yellow, Red

TL50CBGYRAOS4IQ

TL50CWBGYRAOS4IQ

Blue, Green, Yellow, Red

Integral 8-pin M12/Euro-

style quick disconnect

TL50CWBGYRAOSIQ TL50CWBGYRAOS3IQ

White, Blue, Green, Yellow, Red

Wiring Diagrams — 4-Pin Models with 1 to 3 Segments

PNP Input

NPN Input

Key:

1 = Brown

C1 = Color 1

C2 = Color 2

C3 = Color 3

A = Audible

Indicator

Color

Indicator

Color

2 = White

3 = Blue

4 = Black

12-30V dc

24V ac

12-30V dc

24V ac

C2/A

C3/A

Pins 1 and 2 could activate the corresponding color or the audible function, if available.

Wiring Diagrams — 5-Pin Models with 4 Segments

PNP Input

NPN Input

Key:

1 = Brown

2 = White

3 = Blue

4 = Black

5 = Gray

C1 = Color 1

C2 = Color 2

C3 = Color 3

C4 = Color 4

A = Audible

Indicator

Color

Indicator

Color

12-30V dc

24V ac

12-30V dc

24V ac

C4/A

Pin 5 could activate the corresponding color or the audible function, if available.

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 179186 Rev. I

TL50C Compact Tower Light

Wiring Diagrams — 8-Pin Models with 5 to 7 Segments

PNP Input

NPN Input

Key:

1 = White

C1 = Color 1

C2 = Color 2

C3 = Color 3

C4 = Color 4

C5 = Color 5

C6 = Color 6

C7 = Color 7

A = Audible

Indicator

Color

Indicator

Color

2 = Brown

3 = Green

4 = Yellow

5 = Gray

6 = Pink

12-30V dc

24V ac

12-30V dc

24V ac

7 = Blue

8 = Red

C6/A

C7/A

C6/A

C7/A

Pins 3 and 8 can activate the corresponding color or the audible function, if available.

Speciﬁcations

Supply Voltage and Current

Indicators

12 V dc to 30 V dc; or 24 V ac ( 3 V) at 50 Hz to 60 Hz

Indicators—maximum current per LED color:

LEDs are independently selected; 1 to 7 colors depending on model

Indicator Characteristics

•

135 mA at 12 V dc

45 mA at 30 V dc

60 mA at 24 V ac

Color Coordinates

Lumen

Dominant Wavelength (nm)

or Color Temperature (CCT)

Output

(Typical at

25 °C)

Color

Standard Audible Alarm: 25 mA maximum current

Sealed Audible Alarm: 35 mA maximum current

Omni-Directional Sealed Audible Alarm: 45 mA maximum current

Green

528 nm

625 nm

590 nm

470 nm

608 nm

6000 K

–

27.0

9.0

Supply Protection Circuitry

Protected against transient voltages

Red

Yellow

Blue

–

6.0

Input Response Time

Indicator On/Off: 10 milliseconds maximum

–

4.5

Orange

White

–

18.5

25.0

6.5

Audible Alarm

–

Standard Audible Alarm: 2.7 kHz 500 Hz oscillation frequency; maximum

intensity 92 dB at 1 m (3.3ft) (typical)

Turquoise

Violet

0.19

0.20

0.35

0.19

0.37

0.08

0.15

0.26

Sealed Audible Alarm: 2.9 kHz 250 Hz oscillation frequency; maximum

intensity 94 dB at 1 m (3.3 ft) (typical)

Omni-Directional Sealed Audible Alarm: 2.1 kHz 250 Hz oscillation

frequency; maximum intensity 99 dB at 1 m (3.3 ft) (typical)

Omni-Directional Sealed Audible Alarm with Intensity Adjustment: 2.1 kHz

250 Hz oscillation frequency; maximum intensity 95 dB at 1 m (3.3 ft)

(typical)

–

3.0

Magenta

Sky Blue

–

3.5

–

14.5

Operating Conditions

Non-Audible: –40 °C to +50 °C (–40 °F to +122 °F)

Standard and Sealed Audible: –20 °C to +50 °C (–4 °F to +122 °F)

95% at +50 °C maximum relative humidity (non-condensing)

Audible Adjustment

Standard Audible Alarm: Unscrew the cover (up to 1.5 turns maximum) to

adjust the audible intensity. (Do not exceed 1.5 turns or the cover may

detach during operation.) For maximum intensity, rotate the center plug

180° counterclockwise to remove it.

Environmental Rating

Sealed Audible Alarm and Omni-Directional Sealed Audible Alarm with

Intensity Adjustment: Rotate the front cover until the desired intensity is

reached.

UL Type 4X Indoor and UL Type 13

Non-Audible and Sealed Audible: IEC IP67

Standard Audible: IEC IP50

Typical Reduction in Sound Intensity with Audible Adjustment (maximum to

minimum)

•

Standard Audible: 30 dB

Sealed Audible: 20 dB

Omni-Directional Sealed Audible: 12 dB

Refer to CIE 1931 chromaticity diagram or color chart, to show equivalent color with indicated color coordinates.

P/N 179186 Rev. I

www.bannerengineering.com - Tel: + 1 888 373 6767

TL50C Compact Tower Light

Connections

Required Overcurrent Protection

WARNING: Electrical connections must be

Integral 4-pin, 5-pin, or 8-pin M12/Euro-style quick disconnect, or 2 m (6.5

ft) integral PVC cable, depending on model

made by qualiﬁed personnel in accordance with

local and national electrical codes and

regulations.

Models with a quick disconnect require a mating cordset

Construction

Bases and Covers: ABS

Light Segment: Polycarbonate

Overcurrent protection is required to be provided by end product

application per the supplied table.

Overcurrent protection may be provided with external fusing or via Current

Limiting, Class 2 Power Supply.

Supply wiring leads < 24 AWG shall not be spliced.

For additional product support, go to www.bannerengineering.com.

Vibration and Mechanical Shock

Meets IEC 60068-2-6 requirements (Vibration: 10 Hz to 55 Hz, 1.0 mm

amplitude, 5 minutes sweep, 30 minutes dwell)

Meets IEC 60068-2-27 requirements (Shock: 30G 11 ms duration, half sine

wave)

Certiﬁcations

Supply Wiring (AWG)

Required Overcurrent Protection (Amps)

5.0

3.0

2.0

1.0

0.8

0.5

Dimensions

Tower Height (H)

# of

Omni-Directional

Sealed Audible

Colors

Non-Audible

Standard Audible*

Sealed Audible

46.2 mm (1.8 in)

72.0 mm (2.83 in)

97.8 mm (3.85 in)

123.6 mm (4.9 in)

149.4 mm (5.9 in)

175.2 mm (6.9 in)

201.0 mm (7.9 in)

77.1 mm (3.1 in)

102.9 mm (4.1 in)

128.7 mm (5.1 in)

154.5 mm (6.1 in)

180.3 mm (7.1 in)

206.1 mm (8.1 in)

100.2 mm (4.0 in)

126.0 mm (5.0 in)

151.8 mm (6.0 in)

177.6 mm (7.0 in)

203.4 mm (8.0 in)

229.2 mm (9.0 in)

114.2 mm (4.48 in)

140.0 mm (5.5 in)

165.8 mm (6.5 in)

191.6 mm (7.54 in)

217.4 mm (8.56 in)

243.4 mm (9.58 in)

[0.47]

*Tower height (H) with top unscrewed approximately 3.5 mm to allow sound to escape

[0.75]

M30 x 1.5

M12 x 1

8.4

[0.33]

[1.77]

All measurements are listed in millimeters [inches], unless noted otherwise.

Accessories

Cordsets

4-Pin Threaded M12/Euro-Style Cordsets—Single Ended

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406

MQDC-415

MQDC-430

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

44 Typ.

Straight

M12 x 1

ø 14.5

MQDC-450

15.2 m (50 ft)

1 = Brown

2 = White

3 = Blue

4 = Black

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 179186 Rev. I

TL50C Compact Tower Light

5-Pin Threaded M12/Euro-Style Cordsets—Single Ended

Model

Length

Style

Dimensions

Pinout (Female)

MQDC1-501.5

MQDC1-506

MQDC1-515

0.50 m (1.5 ft)

1.83 m (6 ft)

4.57 m (15 ft)

44 Typ.

Straight

M12 x 1

MQDC1-530

9.14 m (30 ft)

ø 14.5

MQDC1-506RA

MQDC1-515RA

1.83 m (6 ft)

4.57 m (15 ft)

32 Typ.

[1.26"]

1 = Brown

2 = White

3 = Blue

4 = Black

5 = Gray

30 Typ.

[1.18"]

Right-Angle

MQDC1-530RA

9.14 m (30 ft)

M12 x 1

ø 14.5 [0.57"]

8-Pin Threaded M12/Euro-Style Cordsets with Open-Shield

Model

Length

Style

Dimensions

Pinout (Female)

MQDC2S-806

MQDC2S-815

MQDC2S-830

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

44 Typ.

Straight

M12 x 1

MQDC2S-850

15.2 m (50 ft)

ø 14.5

MQDC2S-806RA

MQDC2S-815RA

MQDC2S-830RA

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

32 Typ.

[1.26"]

1 = White

2 = Brown

3 = Green

4 = Yellow

5 = Gray

6 = Pink

30 Typ.

[1.18"]

Right-Angle

7 = Blue

8 = Red

MQDC2S-850RA

15.2 m (50 ft)

M12 x 1

ø 14.5 [0.57"]

Mounting Brackets

All measurements are listed in millimeters [inches], unless noted otherwise.

SMB30A

•

SMB30FA

•

83.2

Right-angle bracket with curved

slot for versatile orientation

Clearance for M6 (¼ in)

hardware

Mounting hole for 30 mm sensor

12-ga. stainless steel

Swivel bracket with tilt and pan

movement for precise

adjustment

•

Mounting hole for 30 mm sensor

12-ga. 304 stainless steel

Easy sensor mounting to

extrude rail T-slot

•

68.9

36.3

•

Metric and inch size bolt

available

Hole center spacing: A to B=40

Hole size: A=ø 6.3, B= 27.1 x 6.3, C=ø 30.5

Bolt thread: SMB30FA, A= 3/8 - 16 x 2 in; SMB30FAM10, A= M10 - 1.5 x 50

Hole size: B= ø 30.1

P/N 179186 Rev. I

www.bannerengineering.com - Tel: + 1 888 373 6767

TL50C Compact Tower Light

SMB30MM

SMBAMS30P

•

12-ga. stainless steel bracket

with curved mounting slots for

versatile orientation

Clearance for M6 (¼ in)

hardware

Mounting hole for 30 mm sensor

•

Flat SMBAMS series bracket

30 mm hole for mounting

sensors

Articulation slots for 90°+

rotation

12-ga. 300 series stainless steel

•

Hole center spacing: A = 51, A to B = 25.4

Hole size: A = 42.6 x 7, B = ø 6.4, C = ø 30.1

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

SMBAMS30RA

SMB30SC

•

Right-angle SMBAMS series

bracket

30 mm hole for mounting

sensors

Articulation slots for 90°+

rotation

12-ga. (2.6 mm) cold-rolled steel

•

Swivel bracket with 30 mm

mounting hole for sensor

Black reinforced thermoplastic

polyester

Stainless steel mounting and

swivel locking hardware

included

Hole center spacing: A=26.0, A to B=13.0

Hole size: A=26.8 x 7.0, B=ø 6.5, C=ø 31.0

Hole center spacing: A=ø 50.8

Hole size: A=ø 7.0, B=ø 30.0

LMBE12RA35

LMBE12RA45

•

Direct mounting of stand-off pipe, with

common bracket type

•

Direct mounting of stand-off pipe, with

38.25

common bracket type

Zinc-plated steel

•

Zinc-plated steel

•

1/2-14 NPSM nut

1/2 - 14

NPSM NUT

1/2 - 14

NPSM NUT

Mounting distance from the wall to the

center of the 1/2-14 NPSM nut is 45 mm

center of the 1/2-14 NPSM nut is 35 mm

2X Ø9

2X Ø11

Hole center spacing: 20.0

Hole center spacing: 35.0

LMB Sealed Right-Angle Bracket

Model

Description

Construction

LMB30RA

Black polycarbonate

Direct-Mount Models: Bracket kit with base, 30 mm

adapter, set screw, fasteners, O-rings, and gaskets.

LMB30RAC

LMBE12RA

LMBE12RAC

Gray polycarbonate

Black polycarbonate

Gray polycarbonate

Pipe-Mount Models: Bracket kit with base, ½-14 pipe

adapter, set screw, fasteners, O-rings, and gaskets.

For use with stand-off pipe (listed and sold separately).

Elevated Mount System

Model

Features

Components

SA-M30TE12 - Black Acetal

•

Streamlined black acetal or white UHMW stand-off

pipe adapter/cover

Connects between 30 mm light base and ½ in.

NPSM/DN15 pipe

SA-M30TE12C - White UHMW

Mounting hardware included

Polished 304 Stainless

Steel

Black Anodized

Aluminum

Clear Anodized

Aluminum

•

Elevated-use stand-off pipe (½ in. NPSM/DN15)

Polished 304 stainless steel, black anodized

aluminum, or clear anodized aluminum surface

½ in. NPT thread at both ends

SOP-E12-150SS

150 mm (6 in) long

SOP-E12-150A

150 mm (6 in) long

SOP-E12-150AC

150 mm (6 in) long

•

Compatible with most industrial environments

SOP-E12-300SS

SOP-E12-300A

SOP-E12-300AC

300 mm (12 in) long

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 179186 Rev. I

TL50C Compact Tower Light

Components

Model

Features

SOP-E12-900SS

SOP-E12-900A

SOP-E12-900AC

900 mm (36 in) long

SA-E12M30 - Black Acetal

•

Streamlined black acetal or white UHMW mounting

base adapter/cover

Connects between ½ in. NPSM/DN15 pipe and 30

mm (1-3/16 in) drilled hole

SA-E12M30C - White UHMW

Mounting hardware included

Pipe Mounting Flange

Model

Features

•

Construction

1/2-14

NPSM

Elevated-use stand-off pipes (½ in,

NPSM/DN15)

4x ø5.5

Die-cast zinc base with

black paint

SA-F12

ø28

ø70

•

M5 mounting hardware and nitrile gasket

included

ø40

•

Elevated-use stand-off pipes (½ in,

NPSM/DN15)

1/2-14 NPSM

2 x 120°

SA-F12-3

Black Polycarbonate

M4 mounting hardware and nitrile blend

gasket included

8.77

ø60

Banner Engineering Corp Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the

date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time

it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or

liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED

(INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE),

AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT

SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS,

EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM

ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR

WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any

obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or

improper application or installation of this product or use of the product for personal protection applications when the product is

identiﬁed as not intended for such purposes will void the product warranty. Any modiﬁcations to this product without prior express

approval by Banner Engineering Corp will void the product warranties. All speciﬁcations published in this document are subject to

change; Banner reserves the right to modify product speciﬁcations or update documentation at any time. Speciﬁcations and

product information in English supersede that which is provided in any other language. For the most recent version of any

documentation, refer to: www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

TL50CGYRALS3Q [BANNER]

相关型号：

TL50CGYRALS4Q

TL50CGYRALSQ

TL50CGYRAOSIQ

TL50CGYRAOSQ

TL50CGYRAQ

TL50CGYRQ

TL50CRALS3Q

TL50CRALS4Q

TL50CRALSQ

TL50CRAOSIQ

TL50CRAOSQ

TL50CRAQ