VS3RP5XLVQ [BANNER]
VS3 Series Retroreflective Mode Sensors;型号: | VS3RP5XLVQ |
厂家: | Banner Engineering |
描述: | VS3 Series Retroreflective Mode Sensors |
文件: | 总5页 (文件大小:884K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VS3 Series Retroreflective Mode Sensors
Miniature self-contained sensors
VS3 Series Retroreflective Mode Sensor Features
• Extremely compact self-contained miniature sensor
• Coaxial optics eliminate “blind” area at close range
• Visible red sensing beam (both polarized and non-polarized versions)
• Range to supplied retroreflector is 0 to 250 mm (up to 10")
• 10 to 30V dc operation
• Choice of integral cable or quick-disconnect connector
• 3-wire hookup; output load capacity to 50 mA
• Choose models with NPN (sinking) or PNP (sourcing) output
• Choose dark- or light-operate models
User Application Notes:
• The VS3...XLP series should be used for general sensing applications like packages, small parts, mirror-like surfaces,
or documents. They are most effective when used with the supplied micro-prism reflector.
• When using glass bead tape, (e.g., 3M model 6870), non-polarized models (...XLV) must be used. These models should
also be considered when a glass lens (as in the LP models) is not permitted in the sensing environment.
P
• For non-polarized sensors, an object’s surface reflection (e.g., polished stainless steel), may be more reflective than
low-grade retro-reflective tape, and “bright” object transition may never be detected by the non-polarized sensor.
Visible Red, 680 nm
VS3 Series Retroreflective-Mode Sensors
Supply
Voltage
Output
Type
Models
Cable
Excess Gain
Beam Pattern
Non-Polarized Models
1000
VS3AN5XLV
VS3AN5XLVQ
2 m (6.5')
3-Pin Pico QD
NPN
Light Operate
E
X
C
E
S
S
VS3XLV
VS3XLV
15 mm
0.60 in
Retroreflective Mode
10 mm
5 mm
0
0.40 in
0.20 in
0
100
10
Retroreflective
Mode
250 mm (10")
VS3RN5XLV
VS3RN5XLVQ
2 m (6.5')
3-Pin Pico QD
NPN
Dark Operate
using
5 mm
10 mm
15 mm
0.20 in
0.40 in
0.60 in
with BRT32X20AM
Reflector
10 to
30V dc
G
A
I
BRT32X20AM
retro target
(supplied)
with BRT32X20AM
Reflector
VS3AP5XLV
VS3AP5XLVQ
2 m (6.5')
3-Pin Pico QD
PNP
Light Operate
N
0
50 mm 100 mm 150 mm 200 mm 250 mm
2.0 in 4.0 in 6.0 in 8.0 in 10.0 in
1
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
DISTANCE
VS3RP5XLV
2 m (6.5')
PNP
DISTANCE
VS3RP5XLVQ
3-Pin Pico QD
Dark Operate
Polarized Models
1000
VS3AN5XLP
VS3AN5XLPQ
2 m (6.5')
3-Pin Pico QD
NPN
Light Operate
E
VS3XLP
VS3XLP
15 mm
0.60 in
X
C
E
S
S
Polarized
Retroreflective
Mode
10 mm
5 mm
0
0.40 in
0.20 in
0
100
10
Retroreflective
Mode
250 mm (10")
VS3RN5XLP
VS3RN5XLPQ
2 m (6.5')
3-Pin Pico QD
NPN
Dark Operate
using
5 mm
10 mm
15 mm
0.20 in
0.40 in
0.60 in
with BRT32X20AM
Reflector
10 to
30V dc
G
A
I
BRT32X20AM
retro target
(supplied)
with BRT32X20AM
Reflector
VS3AP5XLP
VS3AP5XLPQ
2 m (6.5')
3-Pin Pico QD
PNP
Light Operate
N
0
50 mm 100 mm 150 mm 200 mm 250 mm
2.0 in
1
4.0 in
6.0 in
8.0 in 10.0 in
1 mm
0.04 in
10 mm
0.4 in
100 mm
4 in
1000 mm
40 in
DISTANCE
VS3RP5XLP
2 m (6.5')
PNP
DISTANCE
VS3RP5XLPQ
3-Pin Pico QD
Dark Operate
See Safety Use Warning on Back Page.
Jan 2013
p/n 63226 Rev. B
Printed in USA
VS3 Series Retroreflective Mode
VS3 Series Overview
20 mm
(0.8")
3.0 mm
(.12")
VS3 Series miniature self-contained sensors are designed for retroreflective sensing
in small areas previously accessible only to remote or fiber optic models. Typical
applications include mounting on small feeder tracks, packaging machines, and
conveyors, where larger sensors will not fit.
26 mm
(1.0")
20 mm
(0.8")
32 mm
(1.1")
The coaxial optics of the VS3 allow the retroreflective target to be placed as close to
the sensor lens as needed – there is no “blind” response area, as is typical of most
retroreflective sensors. The VS3 is supplied with a Banner model BRT32X20AM
retroreflective target (see right). The specifications shown on page 1 assume use of
this target.
ø3.5 mm
(0.14")
2.0 mm
(0.08")
Maximum Temperature: 65°C (150°F)
Figure 1. Retroreflective target, model
BRT-32X20AM (supplied with
each sensor)
Other retroreflective materials may be substituted. For example, using the standard
BRT-3 target, the range becomes 400 mm (16"); standard BRT-THG retroreflective
tape yields a 150 mm (6") range. Contact Banner Engineering for sensing
performance when using other retroreflective targets.
VS3 Series Specifications
Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
10 to 30V dc (10% maximum ripple) at less than 25 mA (exclusive of load)
Protected against reverse polarity and transient voltages
SPST solid-state switch
Choose NPN (current sinking) or PNP (current sourcing) models
Choose light operate (N.O.) or dark operate (N.C.) models
Output Rating
50 mA maximum
OFF-state leakage current: < 1 microamp at 24V dc
ON-state saturation voltage: < 0.25V at 10 mA dc; < 0.5V at 50 mA dc
Output Protection Circuitry
Output Response Time
Protected against false pulse on power-up and continuous overload or short circuit of outputs
Overload trip point ≥ 100 mA
1 millisecond ON and OFF
(NOTE: 150 millisecond delay maximum on power-up: output does not conduct during this time)
Repeatability
Indicators
160 microseconds
Two LEDs: Green and Yellow
Green ON steady: power to sensor is ON
Green flashing: output overload
Yellow ON steady: light is sensed
Construction
XLV Models: Black ABS housing with acrylic lens
XLP Models: Black ABS housing with glass lens and acrylic cover
Environmental Rating
Connections
IEC IP67; NEMA 6
2 m (6.5') attached cable: three #28 ga stranded conductors with PE insulation; PVC outer cable jacket; or
3-pin Pico-style threaded quick-disconnect fitting. QD cables are ordered separately.
Operating Conditions
Temperature: -20° to +55°C (-4° to +131°F)
Maximum Relative Humidity: 80% at 50°C (non-condensing)
Vibration and
Mechanical Shock
Vibration: All models meet IEC 60068-2-6, IEC 60947-5-2, UL491 Section 40, MIL-STD-202F Method 201A;
10 to 60 Hz, 0.5 mm peak to peak
Shock: All models meet IEC 60068-2-27, IEC 60947-5-2; 30g peak acceleration, 11 millisecond pulse
duration, half-sine wave pulse shape
Application Notes
Certifications
M3 stainless steel mounting hardware included. Optional mounting brackets are available (page 4).
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
page 2
VS3 Series Retroreflective Mode
VS3 Series Sensor Hookups
Sensors with NPN Outputs
Cabled Models
Sensors with PNP Outputs
Cabled Models
bu
bn
–
+
10-30V dc
+
10-30V dc
–
bn
bk
bu
bk
Load
Load
Quick-Disconnect Models
Quick-Disconnect Models
bn
bu
–
+
10-30V dc
–
10-30V dc
+
bu
bk
bn
bk
Load
Load
VS3 Series Retroreflective Mode Sensor Dimensions
VS3...5XLV
VS3...5XLVQ
With
Integral
Cable
9 mm
(0.35")
15.6 mm
(0.61")
ø3.2 mm
(0.13")
4.5 mm
(0.18")
12.6 mm
(0.50")
14.2 mm
(0.56")
25.4 mm
(1.00")
35.2 mm
(1.39")
16.4 mm
(0.65")
30 mm
(1.2")
7.3 mm
(0.29")
VS3...5XLP
9 mm
(0.35")
VS3...5XLPQ
With
Straight
QD Cable
With
Right-angle
QD Cable
16.6 mm
(0.65")
ø3.2 mm
(0.13")
4.5 mm
(0.18")
13.6 mm
(0.54")
14.2 mm
(0.56")
25.4 mm
(1.00")
35.2 mm
(1.39")
16.4 mm
(0.65")
7.3 mm
(0.29")
47 mm
(1.9")
75 mm
(3.0")
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
page 3
VS3 Series Retroreflective Mode
Accessories
Quick-Disconnect (QD) Cables
Style
Models
Length
For Use With
Dimensions
Pinout
34.7 mm
(1.37")
M8 x 1
PKG3M-2
PKG3M-9
2 m (6.5')
9 m (30')
Black Wire
Blue Wire
3-pin Pico Style
Straight
9.6 mm
(0.38")
Brown Wire
Brown Wire
All VS3 Series sensors
with model suffix “Q”.
23.5 mm
(0.93")
Black Wire
Blue Wire
PKW3M-2
PKW3M-9
2 m (6.5')
9 m (30')
16.5 mm
(0.65")
3-pin Pico Style
Right-angle
ø9.6 mm
(0.38")
M8 x 1
VS3 Series Mounting Brackets
• Right-angle bracket
• 300 series stainless steel
• Right-angle tall bracket
• 300 series stainless steel
SMBVS3S
SMBVS3T
2x 3.2 mm
(0.13")
Ø13.5 mm
(0.53")
7.0 mm
(0.28")
11.8 mm
(0.46")
40°
6.0 mm
(0.24")
Ø13.5mm
(0.53")
13.5 mm
(0.53")
40°
13.5 mm
(0.53")
4x 3.30 mm
(0.13")
5.0 mm
(0.20")
3x 3.3 mm
(0.13")
16.0 mm
(0.63")
51.6 mm
(2.03")
13.5 mm
(0.53")
.9 mm
(0.04")
5.0 mm
(0.20")
20.5 mm
(0.81")
0.9 mm
(0.04")
16.0 mm
(0.63")
23.5 mm
(0.93")
18.0 mm
(0.71")
WARNING . . . Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
!
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety
applications. A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year
following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period.This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of
the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEAL-
ING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE
THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming
any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
P/N 63226 Rev. B
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: sensors@bannerengineering.com
相关型号:
VS3V3BA1FS
VS3V3BA1FS is the TVS diode which is ideal for I/F protection in electronic devices and 01005(0402)-size. Low clamping voltage and high surge resistance provide superior protection.
ROHM
VS3V3BB1FS
VS3V3BB1FS is the TVS diode which is ideal for I/F protection in electronic devices and 01005(0402)-size. Low clamping voltage and high surge resistance provide superior protection.
ROHM
VS3V3BC1EST15R
Trans Voltage Suppressor Diode, 70W, 3.3V V(RWM), Bidirectional, 1 Element, Silicon,
ROHM
VS3V3BC1HST15R
Trans Voltage Suppressor Diode, 70W, 3.3V V(RWM), Bidirectional, 1 Element, Silicon, DSN0603-2, 2 PIN
ROHM
VS3V3BL1HS
VS3V3BL1HS is the TVS diode which is ideal for I/F protection in electronic devices and 0201(0603)-size. Low clamping voltage and high surge resistance provide superior protection.
ROHM
VS3V3BN1HS
VS3V3BN1HS is the TVS diode which is ideal for I/F protection in electronic devices and 0201(0603)-size. Low clamping voltage and high surge resistance provide superior protection.
ROHM
VS3V3BT1FS
VS3V3BT1FS is the TVS diode which is ideal for I/F protection in electronic devices and 01005(0402)-size. Low clamping voltage and high surge resistance provide superior protection.
ROHM
©2020 ICPDF网 联系我们和版权申明