VSM4RP6R [BANNER]
VSM Series Micro Sensors;型号: | VSM4RP6R |
厂家: | Banner Engineering |
描述: | VSM Series Micro Sensors |
文件: | 总7页 (文件大小:656K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
VSM Series Micro Sensors
Datasheet
Miniature self-contained sensors in stainless steel housing
•
•
•
•
•
•
•
Tough - 300 series stainless steel body withstands a wide variety of
chemicals and cutting fluids
Tiny sensors are available as small as a 4 mm barrel (about the size
of a single optical fiber assembly)
Economical, self-contained sensors are available in diffuse or
opposed sensing modes; no separate amplifier required
Advanced optical design provides high performance, and very
repeatable sensing
Well-focused, narrow beam allows the entire barrel sensor to be
recessed into fixtures (excluding 50 mm range models)
Smooth, stainless steel barrel is perfect for hygienic applications that
require routine cleaning
A choice of threaded or smooth barrel housings or flat-pack side-
looking housing
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Models
Housing Style: 4 mm Smooth Barrel
1
NPN Models
PNP Models
Sensing Mode
Range
Output
Type
Connection
VSM46E Emitter
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
—
VSM46EQ7 Emitter
VSM4RP6R
250 mm (9.84 in)
VSM4RN6R
OPPOSED
DO
VSM4RN6RQ7
VSM4RP6RQ7
VSM4AN6CV10
VSM4AN6CV10Q7
VSM4AN6CV20
VSM4AN6CV20Q7
VSM4AN6CV50
VSM4AN6CV50Q7
VSM4AP6CV10
VSM4AP6CV10Q7
VSM4AP6CV20
VSM4AP6CV20Q7
VSM4AP6CV50
VSM4AP6CV50Q7
10 to 30 mm (0.39 to 1.18 in)
typical
20 to 50 mm (0.79 to 1.97 in)
typical
LO
DIFFUSE
50 to 140 mm (1.97 to 5.51 in)
typical
1
Application Note: These sensors have a specified minimum detection range on a 90% reflectivity diffuse white card, but the maximum detection
range varies with target reflectivity, target angle, and sensor tolerance. If reliable background suppression is required in your application, please
contact Banner Engineering to specify a fixed-field or adjustable field sensor with background suppression technology.
Original Document
157367 Rev. F
7 June 2016
157367
VSM Series Micro Sensors
Housing Style: 5 mm Threaded Barrel
2
NPN Models
PNP Models
Sensing Mode
Range
Output
Type
Connection
VSM56E Emitter
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
2 m (6.6 ft)
3-Pin Pico QD
—
VSM56EQ7 Emitter
VSM5RP6R
250 mm (9.84 in)
VSM5RN6R
OPPOSED
DO
VSM5RN6RQ7
VSM5RP6RQ7
VSM5AN6CV10
VSM5AN6CV10Q7
VSM5AN6CV20
VSM5AN6CV20Q7
VSM5AN6CV50
VSM5AN6CV50Q7
VSM5AP6CV10
VSM5AP6CV10Q7
VSM5AP6CV20
VSM5AP6CV20Q7
VSM5AP6CV50
VSM5AP6CV50Q7
10 to 30 mm (0.39 to 1.18 in)
typical
20 to 50 mm (0.79 to 1.97 in)
typical
LO
DIFFUSE
50 to 140 mm (1.97 to 5.51 in)
typical
Housing Style: Flat-Pack Side-Looker
2
NPN Models
PNP Models
Sensing Mode
Range
Output Type
Connection
20 to 50 mm (0.79 to 1.97 in)
typical
VSMQAN6CV20
VSMQAP6CV20
50 to 140 mm (1.97 to 5.51 in)
typical
VSMQAN6CV50
VSMQAN6CV90
VSMQAP6CV50
VSMQAP6CV90
LO
2 m (6.6 ft)
DIFFUSE
90 to 200 mm (3.54 to 7.87 in)
typical
2
Application Note: These sensors have a specified minimum detection range on a 90% reflectivity diffuse white card, but the maximum detection
range varies with target reflectivity, target angle, and sensor tolerance. If reliable background suppression is required in your application, please
contact Banner Engineering to specify a fixed-field or adjustable field sensor with background suppression technology.
2
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 157367 Rev. F
VSM Series Micro Sensors
Specifications
Supply Voltage and Current
Output Protection Circuitry
10 to 30 V dc (10% maximum ripple)
Protected against false power-up and continuous overload or short circuit of
outputs
Overload trip point ≥ 100 mA
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Response Time
Output Configuration
2.5 milliseconds
Single-output: 1 NPN or 1 PNP; light operate (LO) or dark operate
(DO), depending on model
Delay at Power-Up
20 milliseconds
Output Rating
100 mA max
Repeatability
OFF-state leakage current: less than 1 µA
ON-state saturation voltage: less than 2 V at 100 mA
1 millisecond
Indicators
Required Overcurrent Protection
Yellow LED: light sensed
Construction
WARNING: Electrical connections must be
made by qualified personnel in accordance
with local and national electrical codes and
regulations.
300 series stainless steel with PVC cable
CV10, CV20: sapphire lens
CV50, emitter and receiver: glass lens
Environmental Rating
Overcurrent protection is required to be provided by end product
application per the supplied table.
IP67
Overcurrent protection may be provided with external fusing or via
Current Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to http://
www.bannerengineering.com.
Connection
2 m PVC-jacketed cable or 3-pin Pico-style integral QD (Q7), depending on
model.
Operating Conditions
Temperature: 0 °C to +55 °C (+32 °F to +131 °F)
Certifications
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Dimensions
4 mm Smooth Barrel Emitter/Receiver Cable and 50 4 mm Smooth Barrel Emitter/Receiver QD and 50 mm
mm CV Models CV Models
P/N 157367 Rev. F
www.bannerengineering.com - Tel: +1-763-544-3164
3
VSM Series Micro Sensors
5 mm Threaded Barrel Emitter/Receiver Cable and 50
mm CV Models
VSM5 Emitter/Receiver QD and 50 mm CV Models
4 mm Smooth Barrel Cable/10 and 20 mm CV Models
4 mm Smooth Barrel QD/10 and 20 mm CV Models
5 mm Threaded Barrel Cable/10 and 20 mm CV
Models
5 mm Threaded Barrel QD/10 and 20 mm CV Models
4
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 157367 Rev. F
VSM Series Micro Sensors
Flat-Pack Side-Looker
Excess Gain Curves
Opposed Mode VSM4 and
VSM5
Diffuse Mode VSM4 and VSM5
Range 250 mm
Range 10 mm
Range 20 mm
Range 50 mm
25
20
15
1000
100
20
100
10
1
10
1
10
10
0
10 mm 20 mm 30 mm 40 mm 50 mm 60 mm
5
0
0
4 mm
8 mm
12 mm 16 mm
20 mm
1
0
2 mm
4 mm 6 mm
8 mm
10 mm
0
50 mm 100 mm 150 mm 200 mm 250 mm 300 mm
Diffuse Mode VSMQ
Range 50 mm
Range 20 mm
Range 90 mm
25
20
15
100
10
100
10
1
10
5
0
1
0
10 mm 20 mm 30 mm 40 mm 50 mm 60 mm
0
18 mm 36 mm 54 mm 72 mm 96 mm
0
4 mm
8 mm 12 mm 16 mm 20 mm
P/N 157367 Rev. F
www.bannerengineering.com - Tel: +1-763-544-3164
5
VSM Series Micro Sensors
Beam Patterns
Opposed Mode VSM4 and
VSM5
Diffuse Mode VSM4 and VSM5
Range 20 mm
Range 250 mm
Range 10 mm
Range 50 mm
5 mm
4 mm
3 mm
2 mm
1 mm
0 mm
1 mm
2 mm
3 mm
4 mm
5 mm
50 mm
40 mm
30 mm
20 mm
10 mm
0 mm
50 mm
40 mm
30 mm
20 mm
10 mm
0 mm
100 mm
80 mm
60 mm
40 mm
20 mm
0 mm
10 mm
20 mm
30 mm
40 mm
10 mm
20 mm
30 mm
40 mm
50 mm
20 mm
40 mm
60 mm
80 mm
100 mm
50 mm
4 mm 8 mm 12 mm 16 mm 20 mm
10 mm 20 mm 30 mm 40 mm 50 mm
DISTANCE
2 mm 4 mm 6 mm 8 mm 10 mm
DISTANCE
50
100
150
200
250
DISTANCE
DISTANCE (mm)
Diffuse Mode VSMQ
Range 20 mm
Range 50 mm
Range 90 mm
5 mm
4 mm
3 mm
2 mm
1 mm
0 mm
1 mm
2 mm
3 mm
4 mm
5 mm
50 mm
40 mm
30 mm
20 mm
10 mm
0 mm
50 mm
40 mm
30 mm
20 mm
10 mm
0 mm
10 mm
20 mm
30 mm
40 mm
50 mm
10 mm
20 mm
30 mm
40 mm
50 mm
10 mm 20 mm 30 mm 40 mm 50 mm
DISTANCE
4 mm 8 mm 12 mm 16 mm 20 mm
DISTANCE
20 mm 40 mm 60 mm 80 mm 100 mm
DISTANCE
Wiring
Emitters
PNP Models
NPN Models
1
3
1
+
–
+
10-30V dc
+
10-30V dc
3
4
1
4
10-30V dc
–
–
3
Load
Load
6
www.bannerengineering.com - Tel: +1-763-544-3164
P/N 157367 Rev. F
VSM Series Micro Sensors
Accessories
Cordsets
3-Pin Threaded M8/Pico-Style Cordsets
Model
Length
Style
Dimensions
Pinout
PKG3M-2
PKG3M-5
PKG3M-7
PKG3M-9
PKG3M-10
2 m (6.56 ft)
5 m (16.40 ft)
7 m (22.97 ft)
9 m (29.53 ft)
10 m (32.81 ft)
Straight
4
35 Typ.
1
3
ø 9.5
1 = Brown
3 = Blue
4 = Black
M8 x 1
PKW3M-2
PKW3M-5
PKW3M-9
2 m (6.56 ft)
5 m (16.40 ft)
9 m (29.53 ft)
Right-Angle
28 Typ.
20 Typ.
M8 x 1
ø 9.5
Brackets
SMBVSM4
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE
OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER
ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
Copyright Notice
Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not
intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product
warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any
©
time. For the most recent version of any documentation, refer to: www.bannerengineering.com.
Banner Engineering Corp. All rights reserved.
www.bannerengineering.com - Tel: +1-763-544-3164
相关型号:
VSM4RP6RQ7
VSM Series Micro SensorsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
BANNER
VSM5112
6 PIN SURFACE MOUNT VCXOWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51121
6 PIN SURFACE MOUNT VCXOWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51121-FREQ
CMOS Output Clock Oscillator, 1MHz Min, 100MHz MaxWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51121-FREQ-OUT23
CMOS/TTL Output Clock Oscillator, 1MHz Min, 100MHz MaxWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51121/1.00MHZ
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51121/100.00MHZ
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51122
6 PIN SURFACE MOUNT VCXOWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51122-FREQ
CMOS Output Clock Oscillator, 1MHz Min, 100MHz MaxWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51122-FREQ-OUT23
CMOS/TTL Output Clock Oscillator, 1MHz Min, 100MHz MaxWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51122/1.00MHZ
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
VSM51122/100.00MHZ
OscillatorWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
CONNOR-WINFIE
©2020 ICPDF网 联系我们和版权申明