WLAW105X180PWMQ [BANNER]
WLA General Purpose LED Light - PWM Dimmable;
| 型号： | WLAW105X180PWMQ |
| 厂家： | 
Banner Engineering |
| 描述： | WLA General Purpose LED Light - PWM Dimmable |
| 文件： | 总4页 (文件大小：651K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
WLA General Purpose LED Light - PWM
Dimmable
Datasheet
•
Intensity can be controlled from 0 to 100% using Pulse Width Modulation (PWM) on an
input control wire
•
•
•
•
•
•
•
High power solid state LED array in white and color models
Illuminates a large area with an even pattern of light and no shadows
Designed for area and machine lighting
Rugged thermoplastic housing rated to IP69K
Lensed models provide a concentrated, more intense, beam pattern
Available in four sizes
Cabled and quick-disconnect models available
Lensed models shown at left; non-lensed
models shown at right
For PWM dimming, use with the LC65 Dimmer Module. For more information, refer to the LC65 LED Dimmer Module
datasheet, p/n 177086.
Important: Read the following instructions before operating the light. Please download the complete WLA Series Work Light
technical documentation, available in multiple languages, from www.bannerengineering.com for details on the proper use,
applications, Warnings, and installation instructions of this device.
Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde www.bannerengineering.com
toda la documentación técnica de los WLA Series Work Light, disponibles en múltiples idiomas, para detalles del uso
adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.
Models
Lensed Models (xx)
11 = 11ꢀ lenses
1
Non-Lensed Models
Housing Length L1
Connection
LED Color
Cool white
Input Voltage
12 to 30 V dc
22 = 22ꢀ lenses
30 = 30ꢀ lenses
WLAW105X180PWMQ
WLAW190X180PWMQ
WLAW275X180PWMQ
WLAW360X180PWMQ
WLAW105X180LxxPWMQ
WLAW190X180LxxPWMQ
WLAW275X180LxxPWMQ
WLAW360X180LxxPWMQ
105 mm
190 mm
275 mm
360 mm
4-pin Euro integral QD
connector
Additional color and window options listed in the model key.
LED
Color
Array Size
(mm)
Family
WLA
Window
D
Lensing
Connector
W
105X180
L11
PWM
Q
105X180
190X180
275X180
360X180
Blank = No lenses
Blank = 2 m integral cable
Q = Integral 4-pin Euro-style QD
(mating cordset required)
L11 = ± 11 degree lenses
L22 = ± 22 degree lenses
L30 = ± 30 degree lenses
W = Cool white
WW = Warm white
R = Red
Blank = Clear plastic
D = Diffused plastic
PWM = Pulse width
modulation
G = Green
B = Blue
Y = Yellow
1
Integral QD models only are listed. To order the integral 2 m (6.5 ft) PVC cable models, omit the suffix Q from model number (example, WLAW105X180PWM). A model with a
QD requires a mating cordset.
Original Document
179494 Rev. B
12 September 2019
179494
WLA General Purpose LED Light - PWM Dimmable
Wiring
Pins
Color
brown
blue
Connection
12 to 30 V dc
dc common
1
3
4
2
2
1
4
black
white
Pulse width modulation (PWM) input
Not used
3
For maximum intensity, leave the white and black wires floating or connected to common.
Specifications
Supply Voltage and Current
12 V dc to 30 V dc (10% maximum ripple)
Maximum Current per Length
Use only with suitable Class 2 power supply (UL) or SELV
power supply (CE).
Light Length
12 V dc
24 V dc
30 V dc
Watts
See electrical characteristics on product label
Maximum current per length:
105 mm
190 mm
275 mm
360 mm
0.8 A
1.6 A
2.4 A
3.2 A
0.4 A
0.8 A
1.2 A
1.6 A
0.32 A
0.64 A
0.96 A
1.28 A
9.6
19.2
28.8
38.4
Pulse Width Modulation (PWM)
Frequency: Up to 300 Hz
Voltage: 8 to 30 V dc
Current: 4 mA max.
Lumens and Lux
Light Length
2
Lumens
Cool White
Warm White
Green
Red
Yellow
Blue
105 mm
190 mm
275 mm
360 mm
550
435
870
325
650
125
250
375
500
275
550
95
1100
1650
2200
190
285
380
1305
1740
975
825
1300
1100
2
2
Light Length
Non Lensed Models Max Lux at 1m
L11 Lensed Models Max Lux at 1m
Cool White
Warm White
Green
Red
Yellow
Blue
Cool White
Warm White
Green
Red
Yellow
Blue
105 mm
190 mm
275 mm
360 mm
215
430
645
860
170
340
510
680
115
230
345
460
55
110
220
330
440
30
60
2865
5140
7565
8875
2290
4110
6050
7100
2910
4990
6400
7405
1375
2605
3345
3730
1795
3360
4705
5605
815
110
165
220
1385
1760
2030
90
120
2
2
L30 Lensed Models Max Lux at 1m
Light Length
L22 Lensed Models Max Lux at 1m
Cool White
Warm White
Green
Red
Yellow
Blue
Cool White
Warm White
Green
Red
Yellow
Blue
105 mm
190 mm
275 mm
360 mm
1110
2155
3160
4160
880
1125
2090
2675
3470
530
695
315
580
735
950
760
600
770
365
760
475
980
215
405
515
660
1705
2500
3290
1090
1400
1750
1410
1965
2625
1500
2210
2890
1185
1745
2285
1450
1870
2410
975
1375
1825
1215
2
Lumen and lux values are typical when operating at 25 ꢀC ambient. Values lowered by 35% on diffused windows models.
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 179494 Rev. B
WLA General Purpose LED Light - PWM Dimmable
Light Characteristics
Cool White: 5300–7000K
Environmental Rating
Rated IEC IP67 and IP69K, per DIN 40050
Construction
Connections
PBT housing; acrylic window; nickel-plated brass connector or PVC-jacketed
cable
Integral 4-pin M12 male quick disconnect (QD) (4-pin connecting cordset required); or 2 m
(6.5 ft) integral cable
Mounting
Operating Temperature
–20 ꢀC to +50 ꢀC (–4 ꢀF to +122 ꢀF)
When mounting light to combustible or insulating surfaces, a minimum of 1
inch of clearance around all sides is required. Use supplied standoffs or
alternative mounting method to achieve spacing. Accessory bracket available.
Storage Temperature
–40 ꢀC to +70 ꢀC (–40 ꢀF to +158 ꢀF)
Vibration and Mechanical Shock
Note: Do not spray cable with high-pressure
sprayer, or cable damage will result.
All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60 Hz max.,
double amplitude 0.06", maximum acceleration 10G). Also meets IEC 947-5-2; 30G 11 ms
duration, half sine wave.
Certifications
Dimensions
L2
L1
Model
L1
L2
WLAW105X..
WLAW190X..
WLAW275X..
WLAW360X..
105.1 mm (4.14 in)
188.9 mm (7.44 in)
272.7 mm (10.74 in)
356.6 mm (14.04 in)
92.8 mm (3.66 in)
176.7 mm (6.96 in)
260.3 mm (10.25 in)
344.3 mm (13.55 in)
Beam Pattern
100%
75%
50%
25%
0%
Non-Lensed
L11
L22 L30
-100
-80
-60
-40
-20
0
20
40
60
80
100
Light Pattern from Center (cm)
Figure 1. Percentage of Maximum Light Intensity for Lensed and Nonlensed Models at 1 Meter (Typical)
P/N 179494 Rev. B
www.bannerengineering.com - Tel: + 1 888 373 6767
3
WLA General Purpose LED Light - PWM Dimmable
Accessories
Cordsets
4-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
MQDC-450
15.2 m (50 ft)
2
3
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
Brackets
SMBBSSM
SMBBSRA
•
2X Ø6.8
•
316 stainless steel bracket and
316 stainless steel bracket and
hardware
35
2X Ø5.5
hardware
•
Includes 2 brackets; four M5
socket drive, button head screws
to attach to light
•
Right-angle swivel bracket for
versatile orientation
180
10.75
SMBWLAMAG
•
Kit includes two magnets, two
M5 phillips head screws, and
two M5 nuts with lock rings
ø = 51.8 mm (2.04 in)
•
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge,
any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or the
improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER
PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR
FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner
Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such
purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this
document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is
provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
Mexican Importer
Banner Engineering de Mèxico, S. de R.L. de C.V.
David Alfaro Siqueiros 103 Piso 2 Valle oriente
San Pedro Garza Garcia Nuevo Leòn, C. P. 66269
81 8363.2714
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明