WLB92ZCB1100ACT [BANNER]

WLB92 Industrial LED Light Bar (AC Conduit);


型号：	WLB92ZCB1100ACT
厂家：	Banner Engineering
描述：	WLB92 Industrial LED Light Bar (AC Conduit)
文件：	总5页 (文件大小：623K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

WLB92 Industrial LED Light Bar (AC Conduit)

Datasheet

Banner's WLB92 is a very bright LED ﬁxture/luminaire that features an even light output for a no glare glow. The WLB92 series is designed for a wide

variety of environments and applications, including but not limited to work stations, machine lighting, and low bay lighting. The WLB92 uses

advanced LED lighting technology to provide a high-quality and maintenance free industrial lighting solution.

•

Increase worker productivity and ergonomics with bright, high-quality, uniform light

Exceptionally energy efﬁcient for overall cost savings

Durable light with a rugged metal housing and shatter-resistant window

Easy installation with surface mount brackets or choice of snap, swivel, or hanging brackets

Intensity can be controlled from 10% to 100% using a compatible dimmer

Rated for use at 100 V ac to 277 V ac

WLB92 Industrial LED Light Bar, AC conduit versions, are continuous run models that come with 1/2-inch conduit knockouts on the side and back of

both end caps that allow for lights to be cascaded or "daisy-chained" for a continuous length of light. All conduit models are compatible with select

dimming units (see Accessories). WLB92 (AC) Daylight White and Warm White models come with a ﬁve year, limited warranty.

To view or download the latest technical information about this product, including speciﬁcations, dimensions, accessories, and wiring, see

www.bannerengineering.com.

Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde www.bannerengineering.com

toda la documentación técnica de los WLB92 Industrial LED Light Bar (AC Conduit), disponibles en múltiples idiomas, para

detalles del uso adecuado, aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.

Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation technique

complète des WLB92 Industrial LED Light Bar (AC Conduit) sur notre site www.bannerengineering.com pour les détails sur leur

utilisation correcte, les applications, les notes de sécurité et les instructions de montage.

Models

Lighted

Length (mm) Control

Family

Voltage Cascadable

LED Color

Connector

WLB92

550

1100

A = 0-10 V Analog CT = Conduit Entry

Dimming

Z = AC C = Cascadable Blank = Daylight White

WW = Warm White

G = Green

R = Red

Y = Yellow

B = Blue

Installing the WLB92 Industrial LED Light Bar (AC Conduit Models)

WARNING: Risk of Electric Shock

Disconnect or turn off power before installing,

removing, or servicing luminaire.

•

Luminaire must be installed and connected in

accordance with the National Electrical Code (NEC)

and any applicable local code requirements.

Luminaire must be supplied with a 120–277 V ac

50/60 Hz fuse box or circuit breaker

•

Figure 1. Mounting the luminaire to the surface mount brackets

To mount the WLB92 Industrial LED Light Bar, follow these steps.

Original Document

183985 Rev. I

22 August 2019

183985

WLB92 Industrial LED Light Bar (AC Conduit)

1. Remove luminaire from packaging and inspect for damage before installing.

2. Locate the supplied surface mount brackets. (For suspended installation, refer to the separate hanging bracket kit and instructions.)

3. Insert the screws into the bracket and then screw on the t-nuts. Attach bracket assembly to luminaire housing as shown. Fully tighten the

screws to lock in place.

4. Place the light in the mounting location and mark the positions of the bracket mounting holes.

5. Drill the holes and use the appropriate screws to secure the luminaire to the mounting location.

CAUTION: To Reduce the Risk of Fire. Do not install the 550 mm models in a compartment smaller than 305 mm by 305 mm

by 675 mm. Do not install the 1100 mm models in a compartment smaller than 305 mm by 305 mm by 1350 mm.

Wiring the WLB92 Industrial LED Light Bar

Follow these steps to wire your WLB92 Industrial LED Light Bar AC Conduit models.

1/2” Trade Size Knockouts

Wiring Chamber

Remove

access cap

Pull latch out

to release or

insert wire

1. Loosen the screws to remove the access cap from the wiring chamber.

2. Connect the power.

•

To connect the power from the back of the luminaire, remove the knockout from the back of the access cap and install either 1/2-inch

conduit or an AC power cord with strain relief.

To connect the power from the side of the luminaire: remove the knockout from the side of the access cap and install either 1/2-inch

conduit or an AC power cord with strain relief on the luminaire wires.

If using rigid conduit, the conduit hub/connector must be approved for use in dry or damp locations and must be connected to the

conduit before the hub/connector is connected to the luminaire.

3. Pull the luminaire wires out of the wiring chamber, then pull the ﬁeld wires through the knockouts and out of the wiring chamber.

4. Lift the latch a full 90° on the unused terminal block locations and make the following electrical connections:

a) Connect the green/yellow luminaire wire to the AC ground power wire

b) Connect the white luminaire wire to the AC neutral power wire

c) Connect the black luminaire wire to the AC line power wire

d) If using 0–10 V analog dimming, connect the purple luminaire wire to the positive dimming wire

e) If using 0–10 V analog dimming, connect the gray luminaire wire to the negative dimming wire

5. Close the latches on each terminal block when you have ﬁnished wiring, and push all wires back into the wiring chamber.

6. Re-attach the access cap to the wiring chamber.

7. Repeat steps 1 through 5 on other end of the luminaire if you are connecting to more than one luminaire in a continuous run.

Wiring Diagram

Diagram

Wire

Connection

L - Black

N - White

Line/Hot

Neutral

Earth ground

- Green/Yellow

Dim (+) - Purple

0–10 V dc analog dimming

Dim (+)

Dim (-)

Dim (+)

Dim (-)

Dim (-) - Gray

Return analog dimming

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 183985 Rev. I

WLB92 Industrial LED Light Bar (AC Conduit)

Speciﬁcations

Supply Voltage

Dimming

Compatible with 0–10 V analog LED dimming, dimmable to 10% intensity

Compatible dimmers are listed in the Accessories section.

Nominal voltage: 120 V ac to 277 V ac, 60 Hz in North America

Nominal voltage: 100 V ac to 277 V ac, 50/60 Hz outside North America

Power factor: > 0.95 at 120 V ac and > 0.90 at 277 V ac

Total harmonic distortion (THD): < 20%

Construction

Anodized aluminum housing, polycarbonate window and end caps, and stainless steel

mounting brackets

See electrical characteristics on product label

Supply Current

Spacing Criterion

Vertical: 1.20

Horizontal: 1.32

Typical Current Draw (A)

230 V ac

Max. Current

Draw (A) at

90 V ac

Lighted

Length (mm)

Mounting

120 V ac

277 V ac

Surface mount brackets included (2)

Compatible with integral 45 mm aluminum framing mounting slots

Several optional mounting brackets available (see Accessories)

550

0.425

0.850

0.270

0.540

0.145

0.285

0.135

0.250

1100

Connections

1/2-inch trade size conduit knockout

Environmental Rating

IEC IP40

Supply Protection Circuitry

Protected against transient voltages

Light Characteristics

Daylight White and Warm White Efﬁcacy: 110 lumens/watt typical at 120 V ac at 25 °C

(77 °F)

CRI: 82, typical

Operating Temperature for 550 mm Lighted Length Models

Surface Mount Installation: –35 °C to +50 °C (–31 °F to +122 °F) for 24 hours per day

for 5 years of operation

Hanging Installation (> 0.5 m from ceiling): –35 °C to +50 °C (–31 °F to +122 °F) for 24

hours per day for 5 years of operation

Operating Temperature for 1100 mm Lighted Length Models

Surface Mount Installation: –40 °C to +45 °C (–40 °F to +113 °F) for 16 hours per day

for 5 years of operation; or –40 °C to +35 °C (–40 °F to +95 °F) for 24 hours per day for

5 years of operation

Hanging Installation (> 0.5 m from ceiling): –40 °C to +50 °C (–40 °F to +122 °F) for 16

hours per day for 5 years of operation; or –40 °C to +45 °C (–40 °F to +113 °F) for 24

hours per day for 5 years of operation

Color

Dominant Wavelength (nm)

or Color Temperature

(CCT)

Lighted Length Lumens

(Typical at 25 °C)

550 mm

3510

1100 mm

7150

Daylight

White

5000 K ( 300 K)

Storage Temperature

–40 °C to +70 °C (–40 °F to +158 °F)

Warm

White

3510

7150

3000 K

(+225 K, -125 K)

Vibration and Mechanical Shock

Vibration: 10 Hz to 55 Hz, 0.5 mm peak-to-peak amplitude per IEC 60068-2-6

Shock: 5G 11 ms duration, half sine wave per IEC 60068-2-27

Green

Red

525 nm

625 nm

590 nm

470 nm

1430

745

620

405

2975

1545

1295

840

Application Notes

When connecting continuous run/cascadable lights in series, it is important not to

exceed maximum current limitations of 14 AWG, 75 °C wire, in accordance with the

National Electrical Code (NEC) and any applicable local code requirements.

Yellow

Blue

Certiﬁcations

LED Lifetime

Lumen Maintenance - L₇₀

When operating within speciﬁcations, output will decrease less than 30% after 50,000

hours.

Test Data

LM-79, LM-80, TM-21

Spacing Criteria (SC)

The spacing criteria is the ﬁxture-spacing-to-mounting-height ratio and aids in laying out a pattern of ﬁxtures. Multiply the spacing criteria by the

mounting height to get the maximum ﬁxture spacing that still provides even illumination (no shadowing between ﬁxtures).

Luminaire Spacing = SC × Height to Illuminated Plane

The mounting height is the distance from the ﬁxture to the surface you are lighting.

Performance Curves

550 mm Models - Daylight White and Warm White

Illuminance at a Distance

Polar Candela Distribution

Isolux Pattern

0 m

Center Beam (lux)

3,630 lux

1,117 lux

496 lux

Beam Width (m)

1.08 m 2.33 m

2.15 m 4.67 m

3.23 m 7.00 m

4.30 m 9.33 m

5.38 m 11.67 m

6.45 m 14.00 m

180°

170°

160°

1100

917

733

550

367

183

150°

140°

130°

0.5 m

1.0 m

1.5 m

2.0 m

120°

110°

100°

279 lux

179 lux

2.5 m

3.0 m

90°

80°

124 lux

0 m

183

367

550

733

917

1100

Vert.

Horiz.

70°

60°

50°

40°

Vertical Spread: 94.2°

Horizontal Spread: 133.6°

30°

20°

10°

0°

Vertical Angle:

0° Vertical 90° Horizontal

Mount height of 3 meters (3 m)

100 lux

75 lux

50 lux

40 lux

30 lux

20 lux

10 lux

5 lux

50% max.

candela

P/N 183985 Rev. I

www.bannerengineering.com - Tel: + 1 888 373 6767

WLB92 Industrial LED Light Bar (AC Conduit)

1100 mm Models - Daylight White and Warm White

Polar Candela Distribution

Isolux Pattern

Illuminance at a Distance

0 m

Center Beam (lux)

5,060 lux

1,870 lux

932 lux

Beam Width (m)

180°

170°

160°

2200

1833

1467

1100

733

150°

140°

130°

1.12 m 2.26 m

2.25 m 4.53 m

3.37 m 6.79 m

4.50 m 9.06 m

5.62 m 11.32 m

6.74 m 13.58 m

0.5 m

1.0 m

1.5 m

2.0 m

120°

110°

100°

524 lux

367

335 lux

2.5 m

3.0 m

90°

80°

233 lux

0 m

367

Vert.

Horiz.

733

70°

60°

50°

40°

Vertical Spread: 96.7°

1100

1467

1833

2200

Horizontal Spread: 132.3°

30°

20°

10°

0°

Vertical Angle:

0° Vertical 90° Horizontal

Mount height of 3 meters (3 m)

200 lux

150 lux

100 lux

75 lux

50 lux

25 lux

10 lux

5 lux

50% max.

candela

Dimensions

104

[4.1]

[3.8]

22.2 [0.88]

[1.8 ]

Model

WLB92ZC...550ACT

543 mm (21.4 in)

1098 mm (43.2 in)

651 mm (25.6 in)

1206 mm (47.5 in)

WLB92ZC...1100ACT

Accessories

Brackets

LMBWLB92

LMBWLB92CLIP

25.4

•

Standard bracket that ships with the WLB92

light

•

Snap clip allows for tool-less installation

Stainless steel

150

•

Stainless steel

Includes four snap clips, four screws, and two

insulator caps

9.7

Ø6.5

Includes two surface mount brackets, four

screws, and four t-nuts

4 x Ø7

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 183985 Rev. I

WLB92 Industrial LED Light Bar (AC Conduit)

LMBWLB92HK5

LMBWLB92RAS

•

Hanging bracket kit allows for suspended

•

Swivel brackets allow for 180° of movement in

installation

seven ﬁxed positions

•

Includes two hanging bracket assemblies, four

screws, four t-nuts, and two 15-24 mm cables

•

Stainless steel

Includes two swivel bracket assemblies, eight

screws, and four t-nuts

2 x Ø7

2X M6 BHCS

LMBWLB92S

105

•

Surface mount brackets allow for mounting at

the end of the light

•

Stainless steel

9.7

Includes two end brackets, four screws, and

four t-nuts

4 x Ø7

Dimmers

Dimmers with Full Dimming Range:

Dimmers with Limited Dimming Range:

Lutron Diva Family

DVST-XX

DVSCSTV-XX

Leviton Illumatech Family

IP710-LFZ

Leviton Renoir II Family

AWSMT-7DW

AWSMG-7DW

Lutron Nova T Family

NTSTV-DV-XX

AWRMG-7DW

Lutron Maestro Family (dimmer with sensor)

MS-Z101-XX

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for ﬁve years on daylight white and warm white models and one year on all other models following the date of

shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period.

This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER

PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR

FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner

Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identiﬁed as not intended for such

purposes will void the product warranty. Any modiﬁcations to this product without prior express approval by Banner Engineering Corp will void the product warranties. All speciﬁcations published in this

document are subject to change; Banner reserves the right to modify product speciﬁcations or update documentation at any time. Speciﬁcations and product information in English supersede that which is

provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

FCC Part 15 and CAN ICES-3 (B)/NMB-3(B)

This device complies with part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules and CAN ICES-3 (B)/NMB-3(B). These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the manufacturer.

Mexican Importer

Banner Engineering de Mèxico, S. de R.L. de C.V.

David Alfaro Siqueiros 103 Piso 2 Valle oriente

San Pedro Garza Garcia Nuevo Leòn, C. P. 66269

81 8363.2714

WLB92ZCB1100ACT [BANNER]

相关型号：

WLB92ZCB1100PBQMB

WLB92ZCB1100PBQMC

WLB92ZCB1100PBQMD

WLB92ZCB1100PBQMEF

WLB92ZCB1100PBQMG

WLB92ZCB1100PBQMI

WLB92ZCB1100PBQMN

WLB92ZCB550ACT

WLB92ZCB550PBQMB

WLB92ZCB550PBQMC

WLB92ZCB550PBQMD

WLB92ZCB550PBQMEF