WLS28-2CUV395-850S [BANNER]

WLS28-2 UV LED Strip Light;


型号：	WLS28-2CUV395-850S
厂家：	Banner Engineering
描述：	WLS28-2 UV LED Strip Light
文件：	总6页 (文件大小：639K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

WLS28-2 UV LED Strip Light

Datasheet

Banner's WLS28-2 UV LED Strip Lights have sturdy aluminum housings, shatterproof windows, and

impressive environmental ratings, making them a cost-effective operator inspection light or machine

vision light to improve and enhance contrast in UV ﬂuorescent and non-ﬂuorescent applications.

•

UV 365 nm and 395 nm wavelength models available for diverse applications

Low-proﬁle, space-saving design

Rugged, water-resistant IP69K option

Available in four lengths from 285 mm to 1130 mm (11.22 in to 3.7 ft)

Lensed models available on UV395 models

Daisy chain power to multiple lights

Safe for long-term worker operation

Optional snap clips for easy installation and repositioning

Capability to dim lights using the wiring pinout (Hi/Lo/Off)

Optional switch is now Hi/Lo/Off

Automatic temperature protection built into the unit. Above 50 °C, the light dims to manage

heat and protect product lifetime

•

PWM models can be used for strobed operation

Note: When cascading lights, a model with an ON/OFF switch can be used to

control the lights cascaded off the switched model.

Stand-Alone Light—cable

Stand-Alone Light or End Light in a Cascade—QD

First or Middle of a Cascade—QD

First Light in a Cascade—cable

These Work Light Strips are available as either stand-alone models, or as cascade models that can be daisy-chained together for a

continuous length of lighting, with a minimum of wiring.

Stand-alone models have cable or male quick disconnect (QD) at one end for power connection and no connections at opposite

end. A stand-alone model may be used as the last in the cascade series.

Cascade models have cable or male quick disconnect (QD) at one end for power connection and a female quick disconnect (QD) at

the opposite end for connecting to other lights in the cascade. Cascade models with cable end can only be used as the ﬁrst light in

the cascade series. A double-ended accessory cordset must be used between each pair of lights in a cascade.

Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde

www.bannerengineering.com toda la documentación técnica de los WLS28-2 UV LED Strip Light, disponibles

en múltiples idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las instrucciones de

instalación de estos dispositivos.

Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation

technique complète des WLS28-2 UV LED Strip Light sur notre site www.bannerengineering.com pour les

détails sur leur utilisation correcte, les applications, les notes de sécurité et les instructions de montage.

Original Document

189194 Rev. E

3 September 2019

189194

WLS28-2 UV LED Strip Light

Models

Lighted

Wavelength

Length (mm)

Family

Cascadable

Window Construction

Control

Connector

—

WLS28-2

UV395

285

570

C = Cascadable

X = Non-cascadable

X = Not sealed *

S = Sealed †

Blank = 2 m integral cable

Q = Integral 4-pin M12 QD

850 *

1130 *

Blank = None

PB = High/Lo/Off Switch *

UV365 = 365 nm

UV395 = 395 nm

Blank = Clear acrylic (UV395 models)

G = Clear glass (UV365 models)

L25 = 25 deg lensed window (UV395 models) PWM = Pulse Width Modulation Dimming

* Not available in UV365 models

† Sealed models not available with Hi/Lo/Off

Table 1: IEC IP50 Models

Non-Switch Models

HIGH/OFF/LOW Switch Models

PWM Models

Lighted

Wavelength

Length

Stand-Alone

Cascade

Stand-Alone

Cascade

Stand-Alone Cascade

WLS28-2XUV395- WLS28-2CUV395-2 WLS28-2XUV395-28 WLS28-2CUV395-285 WLS28-2XUV395-28 WLS28-2CUV395-285

285X 85X 5XPB XPB 5XPWM XPWM

285 mm

WLS28-2XUV395- WLS28-2CUV395-5 WLS28-2XUV395-57 WLS28-2CUV395-570 WLS28-2XUV395-57 WLS28-2CUV395-570

570X 70X 0XPB XPB 0XPWM XPWM

570 mm

395 nm

850 mm

WLS28-2XUV395- WLS28-2CUV395-8 WLS28-2XUV395-85 WLS28-2CUV395-850 WLS28-2XUV395-85 WLS28-2CUV395-850

850X 50X 0XPB XPB 0XPWM XPWM

WLS28-2XUV395- WLS28-2CUV395-1 WLS28-2XUV395-11 WLS28-2CUV395-113 WLS28-2XUV395-11 WLS28-2CUV395-113

1130 mm

1130X

130X

30XPB

0XPB

30XPWM

0XPWM

Table 2: IEC IP67/IP69K Models

Non-Switch Models

Cascade

PWM Models

Lighted

Wavelength

Length

Stand-Alone

Cascade

WLS28-2XUV365-285GS

WLS28-2XUV365-570GS

WLS28-2XUV395-285S

WLS28-2XUV395-570S

WLS28-2XUV395-850S

WLS28-2XUV395-1130S

WLS28-2CUV365-285GS

WLS28-2CUV365-570GS

WLS28-2CUV395-285S

WLS28-2CUV395-570S

WLS28-2CUV395-850S

WLS28-2CUV395-1130S

WLS28-2XUV365-285GSPWM

WLS28-2XUV365-570GSPWM

WLS28-2XUV395-285SPWM

WLS28-2XUV395-570SPWM

WLS28-2XUV395-850SPWM

WLS28-2XUV395-1130SPWM

WLS28-2CUV365-285GSPWM

WLS28-2CUV365-570GSPWM

WLS28-2CUV395-285SPWM

WLS28-2CUV395-570SPWM

WLS28-2CUV395-850SPWM

WLS28-2CUV395-1130SPWM

285 mm

365 nm

570 mm

285 mm

570 mm

395 nm

850 mm

1130 mm

Wiring Diagram

Male

Female

Wire Color Connection

brown

blue

12 to 30 V dc

dc common

Models without the switch or PWM: Connect to 12 to 30 V dc

for 50% maximum intensity

black

white

Models with PWM: Connect to 8 to 30 V dc to turn the light off;

connect to dc common or leave ﬂoating to turn the light on.

Not used

For maximum intensity, leave the black wire ﬂoating or connected to common.

Integral 2 m (6.5 ft) unterminated cable models are listed. To order the 4-pin M12/Euro-style integral quick disconnect model, add the sufﬁx "Q" to the

model number. For example, WLS28-2XUV395-285XQ.

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 189194 Rev. E

WLS28-2 UV LED Strip Light

Speciﬁcations

Supply Voltage and Current

Environmental Rating

12 V dc to 30 V dc

IEC IP50 (non-sealed models) or IEC IP65, IEC IP67, IP69K per DIN 40050-9

(sealed models)

Use only with a suitable Class 2 power supply (UL) or SELV power supply

(CE)

Vibration and Mechanical Shock

See electrical characteristics on product label

Vibration: 10 Hz to 55 Hz, 1.0 mm peak-to-peak amplitude per IEC

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

60068-2-6

Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27

Operating Temperature

Light Characteristics

–40 °C to +70 °C (–40 °F to +158 °F)

UV365: 360–370 nm

UV395: 390–400 nm

Light output begins to decrease above 50 °C (122 °F) and will be

approximately 65% of max intensity at 60 °C (140 °F) and 30% of max

intensity at 70 °C (158 °F)

LED Lifetime

Lumen Maintenance – L₇₀

When operating within speciﬁcations, output will decrease less than 30%

after 40,000 hours.

Storage Temperature

–40 °C to +70 °C (–40 °F to +158 °F)

Certiﬁcations

Push Button

II = 100% light intensity

I = 50% light intensity

0 = Off

Pulse Width Modulation (PWM)

Frequency: Up to 1000 Hz

Voltage: 8 V dc to 30 V dc

Current: 4 mA maximum per foot

Sealed models only

Construction

Application Note

Clear anodized aluminum housing; painted zinc end caps; zinc plated steel

brackets

Window for UV365 models: tempered borosilicate glass

Window for UV395 models: acrylic

When connecting cascadable lights in series at 100% intensity, it is

important not to exceed maximum current limitations:

Maximum length of light at 12 V dc: 1.4 m (4.6 ft)

Maximum length of light at 24 V dc: 3.0 m (9.8 ft)

Maximum length of light at 30 V dc: 3.1 m (10.2 ft)

Mounting

(2) swivel brackets SMBWLS28RA included and (4) screws

At 50% intensity, double the lengths.

Connections

Integral 4-pin M12/Euro-style male quick disconnect (4-pin connecting

cordset required); or 2 m (6.5 ft) integral PVC cable

Note: Do not spray cable with high-

pressure sprayer, or cable damage will

result.

Note: This product emits UV light. Exempt

Risk Group (RG 0) product. No optical

hazard is considered reasonably

foreseeable, even for continuous,

unrestricted use (IEC 62471).

Table 3: Typical Current

Typical Current

Light Length

Max. Current

Radiant Flux (mW) (Typical at 25 °C)

12 V dc

24 V dc

30 V dc

UV365

UV395

285 mm

570 mm

850 mm

1130 mm

0.66 A

1.36 A

2.13 A

3.04 A

0.30 A

0.61 A

0.92 A

1.24 A

0.24 A

0.48 A

0.73 A

0.97 A

0.8

1.6

2.4

3.2

250

500

850

1700

2550

3400

P/N 189194 Rev. E

www.bannerengineering.com - Tel: + 1 888 373 6767

WLS28-2 UV LED Strip Light

Dimensions

L25 Models

[.31]

[.55]

[1.10]

32.2

[1.27]

13.5

[.53]

9.5

[.37]

[.83]

[.75]

[1.10]

[1.18]

ø 5

[.20]

Motion Detector

Models

ON/OFF Switch

Models

ø 14.7

[.58]

4 X M3 X .50 ISO

[1.18]

7.5

[.30]

21.0

[.83]

13.5

[.53]

31.5

[1.24]

36.9

[1.45]

10.5

[.41]

20.8

[.82]

20.8

[.82]

Dimensions are shown with the included SMBWLS28RA bracket.

Non-Switch Models

IP50 Models

IP67/IP69K Models

WLS28-2..285X

WLS28-2..570X

WLS28-2..850X

WLS28-2..1130X

WLS28-2..285S

WLS28-2..570S

WLS28-2..850S

WLS28-2..1130S

362 mm (14.3 in)

644 mm (25.4 in)

926 mm (36.5 in)

1208 mm (47.6 in)

346 mm (13.6 in)

628 mm (24.7 in)

910 mm (35.8 in)

1192 mm (46.9 in)

286 mm (11.26 in)

568 mm (22.36 in)

850 mm (33.46 in)

1132 mm (44.57 in)

316 mm (12.4 in)

598 mm (23.5 in)

880 mm (34.6 in)

1162 mm (45.7 in)

ON/OFF Switch Models

Model

WLS28-2..285XPB

WLS28-2..570XPB

WLS28-2..850XPB

WLS28-2..1130XPB

392 mm (15.4 in)

674 mm (26.5 in)

956 mm (37.6 in)

1238 mm (48.7 in)

376 mm (14.8 in)

658 mm (25.9 in)

940 mm (37 in)

286 mm (11.26 in)

568 mm (22.36 in)

850 mm (33.46 in)

1132 mm (44.57 in)

346 mm (13.6 in)

628 mm (24.7 in)

910 mm (35.8 in)

1192 mm (46.9 in)

1222 mm (48.1 in)

Accessories

Cordsets

Use single-ended cordsets between the power source and the QD connection of a stand-alone light or the ﬁrst light in a cascade.

Use double-ended cordsets between lights in a cascade.

4-Pin Threaded M12/Euro-Style Cordsets—Single Ended

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406

MQDC-415

MQDC-430

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

44 Typ.

Straight

M12 x 1

ø 14.5

MQDC-450

15.2 m (50 ft)

1 = Brown

2 = White

3 = Blue

4 = Black

www.bannerengineering.com - Tel: + 1 888 373 6767

P/N 189194 Rev. E

WLS28-2 UV LED Strip Light

4-Pin Threaded M12/Euro-Style Cordsets—Single Ended

Model

Length

Style

Dimensions

Pinout (Female)

MQDC-406RA

MQDC-415RA

MQDC-430RA

1.83 m (6 ft)

4.57 m (15 ft)

9.14 m (30 ft)

32 Typ.

[1.26"]

30 Typ.

[1.18"]

Right-Angle

MQDC-450RA

15.2 m (50 ft)

M12 x 1

ø 14.5 [0.57"]

4-Pin Threaded M12/Euro-Style Cordsets—Double Ended

Model

Length

Style

Dimensions

Pinout

MQDEC-401SS

MQDEC-403SS

MQDEC-406SS

MQDEC-412SS

MQDEC-420SS

MQDEC-430SS

0.31 m (1 ft)

0.91 m (3 ft)

1.83 m (6 ft)

3.66 m (12 ft)

6.10 m (20 ft)

9.14 m (30 ft)

Female

40 Typ.

[1.58"]

M12 x 1

Male

ø 14.5 [0.57"]

Male Straight/

44 Typ.

[1.73"]

Female Straight

M12 x 1

ø 14.5 [0.57"]

MQDEC-450SS

15.2 m (50 ft)

1 = Brown

2 = White

3 = Blue

4 = Black

4-Pin Threaded M12/Euro-Style Splitter Cordsets—Flat Junction

Model

Branches (Female)

Trunk (Male)

Pinout

CSB-M1240M1240

CSB-M1240M1241

CSB-M1241M1241

CSB-M1248M1241

CSB-M12415M1241

CSB-M12425M1241

CSB-UNT425M1241

No branch

No trunk

Female

0.30 m (1 ft)

2.50 m (8 ft)

4.57 m (15 ft)

7.60 m (25 ft)

2 x 0.30 m (1 ft)

Male

7.60 m (25 ft) Unterminated

Ø4.5

[0.18"]

44 Typ.

[1.73"]

18.0

[0.71"]

40 Typ.

[1.58"]

Ø14.5 [0.57"]

M12 x 1

Ø14.5 [0.57"]

M12 x 1

1 = Brown

2 = White

3 = Blue

43.0

[1.69"]

35 [1.38"]

4 = Black

P/N 189194 Rev. E

www.bannerengineering.com - Tel: + 1 888 373 6767

WLS28-2 UV LED Strip Light

Brackets

SMBWLS28RA

SMBWLS28SM

The bracket kit is available as a

This kit allows the light or switch to be

mounted at a right angle to the

mounting surface. The kit contains two

end brackets and four screws.

replacement for the one that comes

with the light or switch. The kit contains

two end brackets and four screws.

SMBWLS28SP

SMH1316

•

Stainless steel snap bracket

kit

Includes two brackets

This kit allows the light or switch to be

mounted to a 13/16-inch Unistrut

channel. Light is shown. The kit

includes:

•

#10-32 spring nuts (qty 2)

#10-32 socket head cap

screws (qty 2)

•

#10 lock washers (qty 2)

SMBWLSMAG

Magnetic mounting bracket for easy

attachment to steel surfaces

SMBWLSMAGR

Protective cover also available to

prevent scratches to painted surfaces

Banner Engineering Corp. Limited Warranty

Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or

replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not

cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.

THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.

This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO

BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES

RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,

STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.

Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously

manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the

product is identiﬁed as not intended for such purposes will void the product warranty. Any modiﬁcations to this product without prior express approval by Banner Engineering Corp will

void the product warranties. All speciﬁcations published in this document are subject to change; Banner reserves the right to modify product speciﬁcations or update documentation at

any time. Speciﬁcations and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:

www.bannerengineering.com.

For patent information, see www.bannerengineering.com/patents.

Mexican Importer

Banner Engineering de Mèxico, S. de R.L. de C.V.

David Alfaro Siqueiros 103 Piso 2 Valle oriente

San Pedro Garza Garcia Nuevo Leòn, C. P. 66269

81 8363.2714

WLS28-2CUV395-850S [BANNER]

相关型号：

WLS28-2CUV395-850SPWM

WLS28-2CUV395-850X

WLS28-2CUV395-850XPB

WLS28-2CUV395-850XPWM

WLS28-2CW1130S

WLS28-2CW1130SPWM

WLS28-2CW1130X

WLS28-2CW1130XM

WLS28-2CW1130XPB

WLS28-2CW1130XPWM

WLS28-2CW145S

WLS28-2CW145SPWM