WLS28-2CWR-850XQ [BANNER]
WLS28-2 Dual Color LED Strip Light;
| 型号： | WLS28-2CWR-850XQ |
| 厂家： | 
Banner Engineering |
| 描述： | WLS28-2 Dual Color LED Strip Light |
| 文件： | 总5页 (文件大小：710K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
WLS28-2 Dual Color LED Strip Light
Datasheet
Banner's LED Strip Lights have sturdy aluminum housings, shatterproof windows, and impressive
environmental ratings, making them an ideal general-purpose LED light for machine, enclosure, or
other industrial lighting applications. Having two colors in one device make these ideal for mobile
vehicle, machine status, and vision lighting applications.
•
•
•
•
•
•
•
•
Low-profile, space-saving design
Rugged, water-resistant IP69K option
Available in eight lengths from 145 mm to 1130 mm
Lensed models or choice of clear or diffuse window
Daisy chain power to multiple lights
Optional snap clips for easy installation and repositioning
Optional switch for color selection and control
Automatic temperature protection built into the unit. Above 50 °C, the light dims to manage
heat and protect lifetime
Note: When cascading lights, a model with a color selection switch can be
used to control the lights cascaded off the switched model.
Stand-Alone Light—cable
Stand-Alone Light or End Light in a Cascade—QD
First or Middle of a Cascade—QD
First Light in a Cascade—cable
WLS28-2 LED Strip Lights are available as either stand-alone models, or as cascade models that can be "daisy-chained" together
for a continuous length of lighting, with a minimum of wiring.
Stand-alone models have cable or male QD fitting at one end for power connection, no connections at opposite end. A stand-alone
model may be used as the last in the cascade series.
Cascade models have cable or male QD fitting at one end for power connection, female QD fitting at opposite end for connection
to other lights in the cascade. Cascade models with cable end can only be used as the first light in the cascade series. A double-
ended accessory cordset must be used between each pair of lights in a cascade.
Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde
www.bannerengineering.com toda la documentación técnica de los WLS28-2 Dual Color LED Strip Light,
disponibles en múltiples idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las
instrucciones de instalación de estos dispositivos.
Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation
technique complète des WLS28-2 Dual Color LED Strip Light sur notre site www.bannerengineering.com pour
les détails sur leur utilisation correcte, les applications, les notes de sécurité et les instructions de montage.
Models
Colors (C) / Density (D)
Lighted
Length (mm)
Power
Switch
Family
Cascadable
C1
D1
C2
D2
Window Construction
Connector
WLS28-2
X
—
Q
W
R
285
D
X
C = Cascadable
X = Non-cascadable
145
285
430
570
710
850
990
1130
S = Sealed *
X = Not sealed
Blank = 2 m integral cable
Q = 4-pin Euro-style QD
(mating cordset required)
Blank = None
W = Daylight white
B = Blue
G = Green
R = Red
Blank = 100%
2 = 50%
3 = 33%
Blank = Clear plastic
D = Diffused plastic
PB = Color 1 / Off / Color 2
L25 = 25° lensed window
Y = Yellow
* Sealed models not available with On/Off Switch
Original Document
181739 Rev. G
3 September 2019
181739
WLS28-2 Dual Color LED Strip Light
Density (D) is defined by the quantity of LEDs populated on the circuit. For example, at 100% density, there are 18 LEDs per 285
mm, and at 50% density, there are 9 LEDs per 285 mm. The lumen output decreases proportionally with density.
Sample Model Number
Description
WLS28-2XWR-570XQ
WLS28-2XWR-285SQ
WLS28-2CWR-850XQ
WLS28-2XWR2-1130X
Non Cascade, White (100% Density), Red (100% Density), 570 mm, Unsealed, 4-pin M12/Euro-style quick disconnect connector
Non Cascade, White (100% Density), Red (100% Density), 285 mm, Sealed, 4-pin M12/Euro-style quick disconnect connector
Cascadable, White (100% Density), Red (100% Density), 850 mm, Unsealed, 4-pin M12/Euro-style quick disconnect connector
Non Cascade, White (100% Density), Red (50% Density),1130 mm, Unsealed, 2 m integral cable with flying leads
Non-Cascade, White (100% Density), Red (50% Density), 285 mm, Unsealed, Color 1 /OFF / Color 2 rocker switch, 4-pin M12/
Euro-style quick disconnect connector
WLS28-2XWR2-285XPBQ
Wiring Diagrams
Male
Female
Pin
Wire Color
Connection
1
3
4
2
brown
blue
Color 1: 12 to 30 V dc
1
4
2
dc common
1
4
2
3
black
white
Color 2: 12 to 30 V dc (color 2 overrides color 1)
Not used
3
Specifications
Operating Voltage
12 V dc to 30 V dc
Push Button
II = Color 2
I = Color 1
0 = Off
Use only with a suitable Class 2 power supply (UL) or SELV power supply
(CE)
See electrical characteristics on product label
Connections
Integral 4-pin M12/Euro-style male quick disconnect (4-pin connecting
cordset required); or 2 m (6.5 ft) integral PVC cable
Typical Current (A)
Light Length
(mm)
Max.
Current (A)
12 V dc
24 V dc
30 V dc
Mounting
(2) swivel brackets SMBWLS28RA included and (4) screws
145
285
430
570
710
850
990
1130
0.33
0.66
1.01
1.36
1.75
2.13
2.59
3.04
0.15
0.30
0.46
0.61
0.77
0.92
1.08
1.24
0.12
0.24
0.36
0.48
0.60
0.73
0.85
0.97
0.4
0.8
1.2
1.6
2.0
2.4
2.8
3.2
Construction
Clear anodized aluminum housing; painted zinc end caps; polycarbonate
window on clear and diffuse plastic models; acrylic window on L25 models;
zinc plated steel brackets
Environmental Rating
IEC IP50 (non-sealed models) or IEC IP65, IEC IP67, IP69K per DIN 40050-9
(sealed models)
Vibration and Mechanical Shock
Vibration 10-55 Hz 1.0 mm p-p amplitude per IEC 60068-2-6
Shock 15G 11 ms duration, half sine wave per IEC 60068-2-27
Light Characteristics - Daylight White
Color Temperature (CCT): 4700–5300K
Lumen output: 475 ( 5%) per 285 mm, typical at 25 °C (77 °F)
CRI: 83, typical
Operating Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Light output begins to decrease above 50 °C (122 °F) and will be
approximately 65% of max intensity at 60 °C (140 °F) and 30% of max
intensity at 70 °C (158 °F)
Light Characteristics - Other Colors
Storage Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
1
Color
Typical Wavelength or Color
Temperature
Typical Intensity (per 285 mm)
Certifications
Red
625 nm
590 nm
525 nm
470 nm
200
150
300
110
Yellow
Green
Blue
D
Sealed models only
Note: Do not spray cable with high-
pressure sprayer, or cable damage will
result.
Application Notes
When connecting cascadable lights in series it is important not to exceed
maximum current limitations:
Maximum length of light at 12 V dc: 1.4 m (4.6 ft)
Maximum length of light at 24 V dc: 3.0 m (9.8 ft)
Maximum length of light at 30 V dc: 3.1 m (10.2 ft)
1
Lumen values are reduced by 25% on diffused window models.
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 181739 Rev. G
WLS28-2 Dual Color LED Strip Light
Dimensions
L25 Models
8
[.31]
14
[.55]
28
[1.10]
32.2
[1.27]
13.5
[.53]
9.5
[.37]
21
[.83]
19
[.75]
28
[1.10]
30
[1.18]
ø 5
[.20]
Motion Detector
Models
ON/OFF Switch
Models
ø 14.7
[.58]
4 X M3 X .50 ISO
30
[1.18]
7.5
[.30]
21.0
[.83]
13.5
[.53]
31.5
[1.24]
36.9
[1.45]
10.5
[.41]
20.8
[.82]
20.8
[.82]
Dimensions are shown with the included SMBWLS28RA bracket.
Non-Switch Models
IP50 Models
IP67/IP69K Models
L
1
L
2
L
3
L
4
WLS28-2..145X
WLS28-2..285X
WLS28-2..430X
WLS28-2..570X
WLS28-2..710X
WLS28-2..850X
WLS28-2..990X
WLS28-2..1130X
WLS28-2..145S
WLS28-2..285S
WLS28-2..430S
WLS28-2..570S
WLS28-2..710S
WLS28-2..850S
WLS28-2..990S
WLS28-2..1130S
221 mm (8.7 in)
362 mm (14.3 in)
503 mm (19.8 in)
644 mm (25.4 in)
785 mm (30.9 in)
926 mm (36.5 in)
1067 mm (42 in)
1208 mm (47.6 in)
205 mm (8.1 in)
346 mm (13.6 in)
487 mm (19.2 in)
628 mm (24.7 in)
769 mm (30.3 in)
910 mm (35.8 in)
1051 mm (41.4 in)
1192 mm (46.9 in)
145 mm (5.71 in)
286 mm (11.26 in)
427 mm (16.81 in)
568 mm (22.36 in)
709 mm (27.91 in)
850 mm (33.46 in)
991 mm (39.02 in)
1132 mm (44.57 in)
175 mm (6.9 in)
316 mm (12.4 in)
457 mm (18.0 in)
598 mm (23.5 in)
739 mm (29.1 in)
880 mm (34.6 in)
1021 mm (40.2 in)
1162 mm (45.7 in)
ON/OFF Switch Models
Model
L
1
L
L
3
L
4
2
WLS28-2..145XPB
WLS28-2..285XPB
WLS28-2..430XPB
WLS28-2..570XPB
WLS28-2..710XPB
WLS28-2..850XPB
WLS28-2..990XPB
WLS28-2..1130XPB
251 mm (9.9 in)
392 mm (15.4 in)
533 mm (21.0 in)
674 mm (26.5 in)
815 mm (32.1 in)
956 mm (37.6 in)
1097 mm (43.2 in)
1238 mm (48.7 in)
235 mm (9.3 in)
376 mm (14.8 in)
517 mm (20.4 in)
658 mm (25.9 in)
799 mm (31.5 in)
940 mm (37 in)
145 mm (5.71 in)
286 mm (11.26 in)
427 mm (16.81 in)
568 mm (22.36 in)
709 mm (27.91 in)
850 mm (33.46 in)
991 mm (39.02 in)
1132 mm (44.57 in)
205 mm (8.1 in)
346 mm (13.6 in)
487 mm (19.2 in)
628 mm (24.7 in)
769 mm (30.3 in)
910 mm (35.8 in)
1051 mm (41.4 in)
1192 mm (46.9 in)
1081 mm (42.6 in)
1222 mm (48.1 in)
Accessories
Cordsets
Use single-ended cordsets between the power source and the QD connection of a stand-alone light or the first light in a cascade.
Use double-ended cordsets between lights in a cascade.
P/N 181739 Rev. G
www.bannerengineering.com - Tel: + 1 888 373 6767
3
WLS28-2 Dual Color LED Strip Light
4-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
44 Typ.
Straight
M12 x 1
2
3
MQDC-450
15.2 m (50 ft)
ø 14.5
1
4
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
1 = Brown
2 = White
3 = Blue
30 Typ.
[1.18"]
Right-Angle
4 = Black
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
4-Pin Threaded M12/Euro-Style Cordsets—Double Ended
Model
Length
Style
Dimensions
Pinout
MQDEC-401SS
MQDEC-403SS
MQDEC-406SS
MQDEC-412SS
MQDEC-420SS
MQDEC-430SS
0.31 m (1 ft)
0.91 m (3 ft)
1.83 m (6 ft)
3.66 m (12 ft)
6.10 m (20 ft)
9.14 m (30 ft)
Female
2
3
1
4
40 Typ.
[1.58"]
M12 x 1
ø 14.5 [0.57"]
Male
Male Straight/
44 Typ.
[1.73"]
Female Straight
1
4
2
3
M12 x 1
ø 14.5 [0.57"]
MQDEC-450SS
15.2 m (50 ft)
1 = Brown
2 = White
3 = Blue
4 = Black
4-Pin Threaded M12/Euro-Style Splitter Cordsets—Flat Junction
Model
Branches (Female)
Trunk (Male)
Pinout
CSB-M1240M1240
CSB-M1240M1241
CSB-M1241M1241
CSB-M1248M1241
CSB-M12415M1241
CSB-M12425M1241
CSB-UNT425M1241
No branch
No trunk
No trunk
Female
0.30 m (1 ft)
2.50 m (8 ft)
4.57 m (15 ft)
7.60 m (25 ft)
2
3
1
4
2 x 0.30 m (1 ft)
Male
7.60 m (25 ft) Unterminated
Ø4.5
[0.18"]
44 Typ.
[1.73"]
1
4
18.0
[0.71"]
2
3
40 Typ.
[1.58"]
Ø14.5 [0.57"]
M12 x 1
Ø14.5 [0.57"]
M12 x 1
1 = Brown
2 = White
3 = Blue
43.0
[1.69"]
35 [1.38"]
4 = Black
4
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 181739 Rev. G
WLS28-2 Dual Color LED Strip Light
Brackets
SMBWLS28RA
SMBWLS28SM
The bracket kit is available as a
This kit allows the light or switch to be
mounted at a right angle to the
mounting surface. The kit contains two
end brackets and four screws.
replacement for the one that comes
with the light or switch. The kit contains
two end brackets and four screws.
SMBWLS28SP
SMH1316
•
Stainless steel snap bracket
kit
Includes two brackets
This kit allows the light or switch to be
mounted to a 13/16-inch Unistrut
channel. Light is shown. The kit
includes:
•
•
•
#10-32 spring nuts (qty 2)
#10-32 socket head cap
screws (qty 2)
•
#10 lock washers (qty 2)
SMBWLSMAG
Magnetic mounting bracket for easy
attachment to steel surfaces
SMBWLSMAGR
Protective cover also available to
prevent scratches to painted surfaces
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
Mexican Importer
Banner Engineering de Mèxico, S. de R.L. de C.V.
David Alfaro Siqueiros 103 Piso 2 Valle oriente
San Pedro Garza Garcia Nuevo Leòn, C. P. 66269
81 8363.2714
©
Banner Engineering Corp. All rights reserved
相关型号：
©2020 ICPDF网 联系我们和版权申明