WLS28-2XUV395-1130SPWM [BANNER]
WLS28-2 UV LED Strip Light;型号: | WLS28-2XUV395-1130SPWM |
厂家: | Banner Engineering |
描述: | WLS28-2 UV LED Strip Light |
文件: | 总6页 (文件大小:639K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
WLS28-2 UV LED Strip Light
Datasheet
Banner's WLS28-2 UV LED Strip Lights have sturdy aluminum housings, shatterproof windows, and
impressive environmental ratings, making them a cost-effective operator inspection light or machine
vision light to improve and enhance contrast in UV fluorescent and non-fluorescent applications.
•
•
•
•
•
•
•
•
•
•
•
UV 365 nm and 395 nm wavelength models available for diverse applications
Low-profile, space-saving design
Rugged, water-resistant IP69K option
Available in four lengths from 285 mm to 1130 mm (11.22 in to 3.7 ft)
Lensed models available on UV395 models
Daisy chain power to multiple lights
Safe for long-term worker operation
Optional snap clips for easy installation and repositioning
Capability to dim lights using the wiring pinout (Hi/Lo/Off)
Optional switch is now Hi/Lo/Off
Automatic temperature protection built into the unit. Above 50 °C, the light dims to manage
heat and protect product lifetime
•
PWM models can be used for strobed operation
Note: When cascading lights, a model with an ON/OFF switch can be used to
control the lights cascaded off the switched model.
Stand-Alone Light—cable
Stand-Alone Light or End Light in a Cascade—QD
First or Middle of a Cascade—QD
First Light in a Cascade—cable
These Work Light Strips are available as either stand-alone models, or as cascade models that can be daisy-chained together for a
continuous length of lighting, with a minimum of wiring.
Stand-alone models have cable or male quick disconnect (QD) at one end for power connection and no connections at opposite
end. A stand-alone model may be used as the last in the cascade series.
Cascade models have cable or male quick disconnect (QD) at one end for power connection and a female quick disconnect (QD) at
the opposite end for connecting to other lights in the cascade. Cascade models with cable end can only be used as the first light in
the cascade series. A double-ended accessory cordset must be used between each pair of lights in a cascade.
Important: Lea el siguiente instructivo antes de operar el luminario. Por favor descargue desde
www.bannerengineering.com toda la documentación técnica de los WLS28-2 UV LED Strip Light, disponibles
en múltiples idiomas, para detalles del uso adecuado, aplicaciones, advertencias, y las instrucciones de
instalación de estos dispositivos.
Important: Lisez les instructions suivantes avant d'utiliser le luminaire. Veuillez télécharger la documentation
technique complète des WLS28-2 UV LED Strip Light sur notre site www.bannerengineering.com pour les
détails sur leur utilisation correcte, les applications, les notes de sécurité et les instructions de montage.
Original Document
189194 Rev. E
3 September 2019
189194
WLS28-2 UV LED Strip Light
Models
UV
Lighted
Wavelength
Length (mm)
Family
Cascadable
Window Construction
Control
Connector
—
WLS28-2
C
Q
UV395
285
X
285
570
C = Cascadable
X = Non-cascadable
X = Not sealed *
S = Sealed †
Blank = 2 m integral cable
Q = Integral 4-pin M12 QD
850 *
1130 *
Blank = None
PB = High/Lo/Off Switch *
UV365 = 365 nm
UV395 = 395 nm
Blank = Clear acrylic (UV395 models)
G = Clear glass (UV365 models)
L25 = 25 deg lensed window (UV395 models) PWM = Pulse Width Modulation Dimming
* Not available in UV365 models
† Sealed models not available with Hi/Lo/Off
Table 1: IEC IP50 Models
Non-Switch Models
1
1
1
HIGH/OFF/LOW Switch Models
PWM Models
Lighted
Wavelength
Length
Stand-Alone
Cascade
Stand-Alone
Cascade
Stand-Alone Cascade
WLS28-2XUV395- WLS28-2CUV395-2 WLS28-2XUV395-28 WLS28-2CUV395-285 WLS28-2XUV395-28 WLS28-2CUV395-285
285X 85X 5XPB XPB 5XPWM XPWM
285 mm
WLS28-2XUV395- WLS28-2CUV395-5 WLS28-2XUV395-57 WLS28-2CUV395-570 WLS28-2XUV395-57 WLS28-2CUV395-570
570X 70X 0XPB XPB 0XPWM XPWM
570 mm
395 nm
850 mm
WLS28-2XUV395- WLS28-2CUV395-8 WLS28-2XUV395-85 WLS28-2CUV395-850 WLS28-2XUV395-85 WLS28-2CUV395-850
850X 50X 0XPB XPB 0XPWM XPWM
WLS28-2XUV395- WLS28-2CUV395-1 WLS28-2XUV395-11 WLS28-2CUV395-113 WLS28-2XUV395-11 WLS28-2CUV395-113
1130 mm
1130X
130X
30XPB
0XPB
30XPWM
0XPWM
Table 2: IEC IP67/IP69K Models
Non-Switch Models
Cascade
1
1
PWM Models
Lighted
Wavelength
Length
Stand-Alone
Stand-Alone
Cascade
WLS28-2XUV365-285GS
WLS28-2XUV365-570GS
WLS28-2XUV395-285S
WLS28-2XUV395-570S
WLS28-2XUV395-850S
WLS28-2XUV395-1130S
WLS28-2CUV365-285GS
WLS28-2CUV365-570GS
WLS28-2CUV395-285S
WLS28-2CUV395-570S
WLS28-2CUV395-850S
WLS28-2CUV395-1130S
WLS28-2XUV365-285GSPWM
WLS28-2XUV365-570GSPWM
WLS28-2XUV395-285SPWM
WLS28-2XUV395-570SPWM
WLS28-2XUV395-850SPWM
WLS28-2XUV395-1130SPWM
WLS28-2CUV365-285GSPWM
WLS28-2CUV365-570GSPWM
WLS28-2CUV395-285SPWM
WLS28-2CUV395-570SPWM
WLS28-2CUV395-850SPWM
WLS28-2CUV395-1130SPWM
285 mm
365 nm
570 mm
285 mm
570 mm
395 nm
850 mm
1130 mm
Wiring Diagram
Male
Female
Pin
Wire Color Connection
1
3
brown
blue
12 to 30 V dc
dc common
1
4
2
Models without the switch or PWM: Connect to 12 to 30 V dc
for 50% maximum intensity
1
4
2
3
3
4
2
black
white
Models with PWM: Connect to 8 to 30 V dc to turn the light off;
connect to dc common or leave floating to turn the light on.
Not used
For maximum intensity, leave the black wire floating or connected to common.
1
Integral 2 m (6.5 ft) unterminated cable models are listed. To order the 4-pin M12/Euro-style integral quick disconnect model, add the suffix "Q" to the
model number. For example, WLS28-2XUV395-285XQ.
2
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 189194 Rev. E
WLS28-2 UV LED Strip Light
Specifications
Supply Voltage and Current
Environmental Rating
12 V dc to 30 V dc
IEC IP50 (non-sealed models) or IEC IP65, IEC IP67, IP69K per DIN 40050-9
(sealed models)
Use only with a suitable Class 2 power supply (UL) or SELV power supply
(CE)
Vibration and Mechanical Shock
See electrical characteristics on product label
Vibration: 10 Hz to 55 Hz, 1.0 mm peak-to-peak amplitude per IEC
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
60068-2-6
Shock: 15G 11 ms duration, half sine wave per IEC 60068-2-27
Operating Temperature
Light Characteristics
–40 °C to +70 °C (–40 °F to +158 °F)
UV365: 360–370 nm
UV395: 390–400 nm
Light output begins to decrease above 50 °C (122 °F) and will be
approximately 65% of max intensity at 60 °C (140 °F) and 30% of max
intensity at 70 °C (158 °F)
LED Lifetime
Lumen Maintenance – L70
When operating within specifications, output will decrease less than 30%
after 40,000 hours.
Storage Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Certifications
Push Button
II = 100% light intensity
I = 50% light intensity
0 = Off
D
Pulse Width Modulation (PWM)
Frequency: Up to 1000 Hz
Voltage: 8 V dc to 30 V dc
Current: 4 mA maximum per foot
Sealed models only
Construction
Application Note
Clear anodized aluminum housing; painted zinc end caps; zinc plated steel
brackets
Window for UV365 models: tempered borosilicate glass
Window for UV395 models: acrylic
When connecting cascadable lights in series at 100% intensity, it is
important not to exceed maximum current limitations:
Maximum length of light at 12 V dc: 1.4 m (4.6 ft)
Maximum length of light at 24 V dc: 3.0 m (9.8 ft)
Maximum length of light at 30 V dc: 3.1 m (10.2 ft)
Mounting
(2) swivel brackets SMBWLS28RA included and (4) screws
At 50% intensity, double the lengths.
Connections
Integral 4-pin M12/Euro-style male quick disconnect (4-pin connecting
cordset required); or 2 m (6.5 ft) integral PVC cable
Note: Do not spray cable with high-
pressure sprayer, or cable damage will
result.
Note: This product emits UV light. Exempt
Risk Group (RG 0) product. No optical
hazard is considered reasonably
foreseeable, even for continuous,
unrestricted use (IEC 62471).
Table 3: Typical Current
Typical Current
Light Length
Max. Current
A
Radiant Flux (mW) (Typical at 25 °C)
12 V dc
24 V dc
30 V dc
UV365
UV395
285 mm
570 mm
850 mm
1130 mm
0.66 A
1.36 A
2.13 A
3.04 A
0.30 A
0.61 A
0.92 A
1.24 A
0.24 A
0.48 A
0.73 A
0.97 A
0.8
1.6
2.4
3.2
250
500
-
850
1700
2550
3400
-
P/N 189194 Rev. E
www.bannerengineering.com - Tel: + 1 888 373 6767
3
WLS28-2 UV LED Strip Light
Dimensions
L25 Models
8
[.31]
14
[.55]
28
[1.10]
32.2
[1.27]
13.5
[.53]
9.5
[.37]
21
[.83]
19
[.75]
28
[1.10]
30
[1.18]
ø 5
[.20]
Motion Detector
Models
ON/OFF Switch
Models
ø 14.7
[.58]
4 X M3 X .50 ISO
30
[1.18]
7.5
[.30]
21.0
[.83]
13.5
[.53]
31.5
[1.24]
36.9
[1.45]
10.5
[.41]
20.8
[.82]
20.8
[.82]
Dimensions are shown with the included SMBWLS28RA bracket.
Non-Switch Models
IP50 Models
IP67/IP69K Models
L
L
2
L
3
L
4
1
WLS28-2..285X
WLS28-2..570X
WLS28-2..850X
WLS28-2..1130X
WLS28-2..285S
WLS28-2..570S
WLS28-2..850S
WLS28-2..1130S
362 mm (14.3 in)
644 mm (25.4 in)
926 mm (36.5 in)
1208 mm (47.6 in)
346 mm (13.6 in)
628 mm (24.7 in)
910 mm (35.8 in)
1192 mm (46.9 in)
286 mm (11.26 in)
568 mm (22.36 in)
850 mm (33.46 in)
1132 mm (44.57 in)
316 mm (12.4 in)
598 mm (23.5 in)
880 mm (34.6 in)
1162 mm (45.7 in)
ON/OFF Switch Models
Model
L
L
2
L
3
L
4
1
WLS28-2..285XPB
WLS28-2..570XPB
WLS28-2..850XPB
WLS28-2..1130XPB
392 mm (15.4 in)
674 mm (26.5 in)
956 mm (37.6 in)
1238 mm (48.7 in)
376 mm (14.8 in)
658 mm (25.9 in)
940 mm (37 in)
286 mm (11.26 in)
568 mm (22.36 in)
850 mm (33.46 in)
1132 mm (44.57 in)
346 mm (13.6 in)
628 mm (24.7 in)
910 mm (35.8 in)
1192 mm (46.9 in)
1222 mm (48.1 in)
Accessories
Cordsets
Use single-ended cordsets between the power source and the QD connection of a stand-alone light or the first light in a cascade.
Use double-ended cordsets between lights in a cascade.
4-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406
MQDC-415
MQDC-430
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
2
3
44 Typ.
1
4
Straight
M12 x 1
ø 14.5
MQDC-450
15.2 m (50 ft)
1 = Brown
2 = White
3 = Blue
4 = Black
4
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 189194 Rev. E
WLS28-2 UV LED Strip Light
4-Pin Threaded M12/Euro-Style Cordsets—Single Ended
Model
Length
Style
Dimensions
Pinout (Female)
MQDC-406RA
MQDC-415RA
MQDC-430RA
1.83 m (6 ft)
4.57 m (15 ft)
9.14 m (30 ft)
32 Typ.
[1.26"]
30 Typ.
[1.18"]
Right-Angle
MQDC-450RA
15.2 m (50 ft)
M12 x 1
ø 14.5 [0.57"]
4-Pin Threaded M12/Euro-Style Cordsets—Double Ended
Model
Length
Style
Dimensions
Pinout
MQDEC-401SS
MQDEC-403SS
MQDEC-406SS
MQDEC-412SS
MQDEC-420SS
MQDEC-430SS
0.31 m (1 ft)
0.91 m (3 ft)
1.83 m (6 ft)
3.66 m (12 ft)
6.10 m (20 ft)
9.14 m (30 ft)
Female
2
3
1
4
40 Typ.
[1.58"]
M12 x 1
Male
ø 14.5 [0.57"]
Male Straight/
44 Typ.
[1.73"]
Female Straight
1
4
2
3
M12 x 1
ø 14.5 [0.57"]
MQDEC-450SS
15.2 m (50 ft)
1 = Brown
2 = White
3 = Blue
4 = Black
4-Pin Threaded M12/Euro-Style Splitter Cordsets—Flat Junction
Model
Branches (Female)
Trunk (Male)
Pinout
CSB-M1240M1240
CSB-M1240M1241
CSB-M1241M1241
CSB-M1248M1241
CSB-M12415M1241
CSB-M12425M1241
CSB-UNT425M1241
No branch
No trunk
No trunk
Female
0.30 m (1 ft)
2.50 m (8 ft)
4.57 m (15 ft)
7.60 m (25 ft)
2
3
1
4
2 x 0.30 m (1 ft)
Male
7.60 m (25 ft) Unterminated
Ø4.5
[0.18"]
44 Typ.
[1.73"]
1
4
18.0
[0.71"]
2
3
40 Typ.
[1.58"]
Ø14.5 [0.57"]
M12 x 1
Ø14.5 [0.57"]
M12 x 1
1 = Brown
2 = White
3 = Blue
43.0
[1.69"]
35 [1.38"]
4 = Black
P/N 189194 Rev. E
www.bannerengineering.com - Tel: + 1 888 373 6767
5
WLS28-2 UV LED Strip Light
Brackets
SMBWLS28RA
SMBWLS28SM
The bracket kit is available as a
This kit allows the light or switch to be
mounted at a right angle to the
mounting surface. The kit contains two
end brackets and four screws.
replacement for the one that comes
with the light or switch. The kit contains
two end brackets and four screws.
SMBWLS28SP
SMH1316
•
Stainless steel snap bracket
kit
Includes two brackets
This kit allows the light or switch to be
mounted to a 13/16-inch Unistrut
channel. Light is shown. The kit
includes:
•
•
•
#10-32 spring nuts (qty 2)
#10-32 socket head cap
screws (qty 2)
•
#10 lock washers (qty 2)
SMBWLSMAG
Magnetic mounting bracket for easy
attachment to steel surfaces
SMBWLSMAGR
Protective cover also available to
prevent scratches to painted surfaces
Banner Engineering Corp. Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not
cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO
BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES
RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT,
STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously
manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the
product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will
void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at
any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to:
www.bannerengineering.com.
For patent information, see www.bannerengineering.com/patents.
Mexican Importer
Banner Engineering de Mèxico, S. de R.L. de C.V.
David Alfaro Siqueiros 103 Piso 2 Valle oriente
San Pedro Garza Garcia Nuevo Leòn, C. P. 66269
81 8363.2714
©
Banner Engineering Corp. All rights reserved
相关型号:
©2020 ICPDF网 联系我们和版权申明