REF102AP-BI [BB]
Voltage Reference, 10V, PDIP8,;型号: | REF102AP-BI |
厂家: | BURR-BROWN CORPORATION |
描述: | Voltage Reference, 10V, PDIP8, |
文件: | 总15页 (文件大小:368K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
REF102
R
E
F
1
0
2
R
E
F
1
0
2
SBVS022A – SEPTEMBER 2000 – REVISED NOVEMBER 2003
10V Precision
Voltage Reference
APPLICATIONS
FEATURES
ꢀ PRECISION-CALIBRATED VOLTAGE
ꢀ +10V ±0.0025V OUTPUT
STANDARD
ꢀ VERY LOW DRIFT: 2.5ppm/°C max
ꢀ D/A AND A/D CONVERTER REFERENCE
ꢀ PRECISION CURRENT REFERENCE
ꢀ EXCELLENT STABILITY:
5ppm/1000hr typ
ꢀ ACCURATE COMPARATOR THRESHOLD
ꢀ EXCELLENT LINE REGULATION:
REFERENCE
1ppm/V max
ꢀ DIGITAL VOLTMETERS
ꢀ TEST EQUIPMENT
ꢀ EXCELLENT LOAD REGULATION:
10ppm/mA max
ꢀ LOW NOISE: 5µVPP typ, 0.1Hz to 10Hz
ꢀ WIDE SUPPLY RANGE: 11.4VDC to 36VDC
ꢀ LOW QUIESCENT CURRENT: 1.4mA max
ꢀ PACKAGE OPTIONS: PLASTIC DIP, SO-8
ꢀ PC-BASED INSTRUMENTATION
V+
Trim
DESCRIPTION
5
2
The REF102 is a precision 10V voltage reference. The drift
is laser-trimmed to 2.5ppm/°C max C-grade over the indus-
trial temperature range. The REF102 achieves its precision
without a heater. This results in low power, fast warm-up,
excellent stability, and low noise. The output voltage is
extremely insensitive to both line and load variations and can
be externally adjusted with minimal effect on drift and
stability. Single supply operation from 11.4V to 36V and
excellent overall specifications make the REF102 an ideal
choice for demanding instrumentation and system reference
applications.
50kΩ
R2
R5
R3
14kΩ
22kΩ
8kΩ
–
R1
6
A1
VOUT
+
7kΩ
R6
R4
DZ1
4kΩ
8
4
Noise Common
Reduction
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright © 2000-2003, Texas Instruments Incorporated
www.ti.com
ABSOLUTE MAXIMUM RATINGS(1)
ELECTROSTATIC
DISCHARGE SENSITIVITY
This integrated circuit can be damaged by ESD. Texas Instru-
ments recommends that all integrated circuits be handled with
appropriate precautions. Failure to observe proper handling
and installation procedures can cause damage.
Input Voltage ...................................................................................... +40V
Operating Temperature
P, U ................................................................................. –25°C to +85°C
Storage Temperature Range
P, U ............................................................................... –40°C to +125°C
Lead Temperature (soldering, 10s) ............................................... +300°C
(SO, 3s) ........................................................... +260°C
Short-Circuit Protection to Common or V+ .............................. Continuous
ESD damage can range from subtle performance degradation
to complete device failure. Precision integrated circuits may be
more susceptible to damage because very small parametric
changes could cause the device not to meet its published
specifications.
NOTE: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may degrade
device reliability.
PACKAGE/ORDERING INFORMATION(1)
SPECIFIED
MAX INITIAL
ERROR (mV)
MAX DRIFT
(PPM/ C)
PACKAGE
DESIGNATOR
TEMPERATURE
RANGE
PACKAGE
MARKING
ORDERING
NUMBER
TRANSPORT
MEDIA, QUANTITY
PRODUCT
°
PACKAGE-LEAD
REF102AU
"
±10
±10
±10
±10
SO-8
SO-8
D
D
–25°C to +85°C
REF102AU
REF102AU/2K5
REF102AU
REF102AU/2K5 Tape and Reel, 2500
Tube, 100
"
REF102AP
±10
±10
DIP-8
P
"
REF102AP
REF102AP
Tube, 50
REF102BU
"
±5
±5
±5
±5
SO-8
SO-8
D
D
"
"
REF102BU
REF102BU/2K5
REF102BU
REF102BU/2K5 Tape and Reel, 2500
Tube, 100
REF102BP
±5
±5
DIP-8
P
"
REF102BP
REF102BP
Tube, 50
REF102CU
"
±2.5
±2.5
±2.5
±2.5
SO-8
SO-8
D
D
"
"
REF102CU
REF102CU/2K5
REF102CU
REF102CU/2K5 Tape and Reel, 2500
Tube, 100
REF102CP
±2.5
±2.5
DIP-8
P
"
REF102CP
REF102CP
Tube, 50
NOTE: (1) For the most current package and ordering information, see the Package Option Addendum located at the end of this data sheet.
PIN CONFIGURATIONS
Top View
DIP, SO
NC
V+
Noise Reduction
1
2
3
4
8
7
6
5
NC
NC
VOUT
Trim
Com
NC = Not Connected
REF102
2
SBVS022A
www.ti.com
ELECTRICAL CHARACTERISTICS
At TA = +25°C and VS = +15V power supply, unless otherwise noted.
REF102A
REF102B
TYP
REF102C
TYP
PARAMETER
CONDITIONS
MIN
TYP
MAX
MIN
MAX
MIN
MAX
UNITS
OUTPUT VOLTAGE
Initial
vs Temperature (1)
vs Supply
TA = 25°C
9.99
10.01
10
9.995
10.005
5
9.9975
10.0025
2.5
V
ppm/°C
(Line Regulation)
vs Output Current
(Load Regulation)
V
S = 11.4V to 36V
2
1
1
ppm/V
I
L = 0mA to +10mA
L = 0mA to –5mA
A = +25°C
20
40
10
20
10
20
ppm/mA
ppm/mA
I
vs Time
T
M Package
5
20
ꢀ
ꢀ
ꢀ
ppm/1000hr
ppm/1000hr
P, U Packages (2)
Trim Range (3)
Capacitive Load, max
±3
ꢀ
ꢀ
%
pF
1000
5
ꢀ
ꢀ
ꢀ
ꢀ
NOISE
0.1Hz to 10Hz
µVPP
OUTPUT CURRENT
+10, –5
ꢀ
ꢀ
ꢀ
ꢀ
mA
INPUT VOLTAGE
RANGE
+11.4
+36
ꢀ
ꢀ
ꢀ
ꢀ
V
QUIESCENT CURRENT
WARM-UP TIME (4)
I
OUT = 0
+1.4
mA
µs
To 0.1%
15
ꢀ
ꢀ
TEMPERATURE
RANGE
Specification
REF102A, B, C
–25
+85
ꢀ
ꢀ
ꢀ
ꢀ
°C
ꢀ Specifications same as REF102A.
NOTES: (1) The “box” method is used to specify output voltage drift vs temperature. See the Discussion of Performance section.
(2) Typically 5ppm/1000hrs after 168hr powered stabilization.
(3) Trimming the offset voltage affects drift slightly. See Installation and Operating Instructions for details.
(4) With noise reduction pin floating. See Typical Characteristics for details.
REF102
SBVS022A
3
www.ti.com
TYPICAL CHARACTERISTICS
At TA = +25°C, VS = +15V, unless otherwise noted.
POWER TURN-ON RESPONSE with 1µF CN
POWER TURN-ON RESPONSE
VOUT
VOUT
VIN
VIN
Time (10ms/div)
Power Turn-On
Time (5µs/div)
Power Turn-On
POWER SUPPLY REJECTION vs FREQUENCY
130
LOAD REGULATION
+1.5
+1.0
+0.5
120
110
100
90
0
−0.5
−1.0
−1.5
80
70
60
1
100
Frequency (Hz)
1k
10k
–5
0
+5
+10
Output Current (mA)
QUIESCENT CURRENT vs TEMPERATURE
RESPONSE TO THERMAL SHOCK
+600
+300
0
1.6
1.4
1.2
1.0
0.8
–300
REF102C Immersed in +85°C Fluorinert Bath
TA = +85°C
TA
+25°C
–600
=
0
15
30
45
60
−75
−50 −25
0
+25
+50
+75 +100 +125
Temperature (°C)
Time (s)
REF102
4
SBVS022A
www.ti.com
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +15V, unless otherwise noted.
TYPICAL REF102 REFERENCE NOISE
20Ω
2kΩ
Oscilloscope
6
4
–
8kΩ
2
100µF
OPA227
+
DUT
0
2µF
15.8kΩ
−2
−4
Gain = 100V/V
f−3dB = 0.1Hz and 10Hz
Noise Test Circuit.
−6
Low Frequency Noise (1s/div)
(See Noise Test Circuit)
REF102 is specified by the more commonly-used “box
method.” The “box” is formed by the high and low specifica-
tion temperatures and a diagonal, the slope of which is equal
to the maximum specified drift.
THEORY OF OPERATION
Refer to the diagram on the first page of this data sheet. The
10V output is derived from a compensated buried zener
diode DZ1, op amp A1, and resistor network R1 – R6.
Since the shape of the actual drift curve is not known, the
vertical position of the box is not known, either. It is, however,
bounded by VUPPER BOUND and VLOWER BOUND (see Figure 1).
Figure 1 uses the REF102CU as an example. It has a drift
specification of 2.5ppm/°C maximum and a specification
temperature range of –25°C to +85°C. The “box” height,
V1 to V2, is 2.75mV.
Approximately 8.2V is applied to the non-inverting input of A1
by DZ1. R1, R2, and R3 are laser-trimmed to produce an exact
10V output. The zener bias current is established from the
regulated output voltage through R4. R5 allows user-trimming
of the output voltage by providing for small external adjust-
ment of the amplifier gain. Because the temperature coeffi-
cient (TCR) of of R5 closely matches the TCR of R1, R2 and
R3 , the voltage trim has minimal effect on the reference drift.
The output voltage noise of the REF102 is dominated by the
noise of the zener diode. A capacitor can be connected
between the Noise Reduction pin and ground to form a low-
pass filter with R6 and roll off the high-frequency noise of the
zener.
REF102CU VUPPER BOUND
+10.00275
V
1
2.75mV
VNOMINAL
+10.0000
Worst-case
∆VOUT for
REF102CU
DISCUSSION
V
2
OF PERFORMANCE
+9.99725
REF102CU VLOWER BOUND
The REF102 is designed for applications requiring a preci-
sion voltage reference where both the initial value at room
temperature and the drift over temperature are of importance
to the user. Two basic methods of specifying voltage refer-
ence drift versus temperature are in common usage in the
industry—the “butterfly method” and the “box method.” The
−25
0
+25
+50
+85
Temperature (°C)
FIGURE 1. REF102CU Output Voltage Drift.
REF102
SBVS022A
5
www.ti.com
used. The circuit in Figure 3 has a minimum trim range of
±300mV. The circuit in Figure 4 has less range but provides
higher resolution. The mismatch in TCR between RS and the
internal resistors can introduce some slight drift. This effect
is minimized if RS is kept significantly larger than the 50kΩ
internal resistor. A TCR of 100ppm/°C is normally sufficient.
INSTALLATION AND
OPERATING INSTRUCTIONS
BASIC CIRCUIT CONNECTION
Figure 2 shows the proper connection of the REF102. To
achieve the specified performance, pay careful attention to
layout. A low resistance star configuration will reduce voltage
errors, noise pickup, and noise coupled from the power
supply. Commons should be connected as indicated, being
sure to minimize interconnection resistances.
V+
+
1µF
2
Tantalum
VOUT
6
(1)
2
(2)
+10V
REF102
VTRIM
5
20kΩ
V+
6
Output
Voltage
Adjust
+
1µF
Tantalum
REF102
RL 1
RL 2
RL 3
4
Minimum range (±300mV) and minimal
degradation of drift.
4
(1)
(2)
FIGURE 3. REF102 Optional Output Voltage Adjust.
NOTES: (1) Lead resistances here of up to a few ohms have
negligible effect on performance. (2) A resistance of 0.1Ω in
series with these leads will cause a 1mV error when the load
current is at its maximum of 10mA. This results in a 0.01%
error of 10V.
V+
+
1µF
2
Tantalum
FIGURE 2. REF102 Installation.
VOUT
6
+10V
REF102
OPTIONAL OUTPUT VOLTAGE ADJUSTMENT
VTRIM
5
RS
20kΩ
Output
Voltage
Adjust
Optional output voltage adjustment circuits are shown in
Figures 3 and 4. Trimming the output voltage will change the
voltage drift by approximately 0.008ppm/°C per mV of trimmed
voltage. In the circuit in Figure 3, any mismatch in TCR
between the two sections of the potentiometer will also affect
drift, but the effect of the ∆TCR is reduced by a factor of five
by the internal resistor divider. A high quality potentiometer,
with good mechanical stability, such as a cermet, should be
1MΩ
4
Higher resolution, reduced range (typically ±25mV).
FIGURE 4. REF102 Optional Output Voltage, Fine Adjust.
REF102
6
SBVS022A
www.ti.com
OPTIONAL NOISE REDUCTION
APPLICATIONS INFORMATION
The high-frequency noise of the REF102 is dominated by the
zener diode noise. This noise can be greatly reduced by
connecting a capacitor between the Noise Reduction pin and
ground. The capacitor forms a low-pass filter with R6 (refer to
the figure on page 1) and attenuates the high-frequency
noise generated by the zener. Figure 5 shows the effect of a
1µF noise reduction capacitor on the high-frequency noise of
the REF102. R6 is typically 7kΩ so the filter has a –3dB
frequency of about 22Hz. The result is a reduction in noise
from about 800µVPP to under 200µVPP. If further noise
reduction is required, use the circuit in Figure 14.
High accuracy, extremely low drift, outstanding stability, and
low cost make the REF102 an ideal choice for all instrumen-
tation and system reference applications. Figures 6 through
14 show a variety of useful application circuits.
V+ (1.4V to 26V)
2
6
(5V −IL)
REF102
1.4mA <
< 5.4mA
RS
4
−10V Out
IL
RS
NO CN
V+ (1.4V to 26V)
2
−15V
a) Resistor Biased –10V Reference
R1
2kΩ
REF102
10V
6
C1
1000pF
CN = 1µF
4
−10V Out
OPA227
FIGURE 5. Effect of 1µF Noise Reduction Capacitor on
Broadband Noise (f–3dB = 1MHz)
b) Precision –10V Reference.
See SBVA008 for more detail.
FIGURE 6. –10V Reference Using a) Resistor or b) OPA227.
REF102
SBVS022A
7
www.ti.com
V+
V+
V+
2
220Ω
–
2N2905
OPA227
+10V
2
2
6
IL
+
REF102
R1 =
VCC − 10V
IL (TYP)
6
+10V
6
REF102
REF102
+10V
IL
4
IL
4
4
a) −20mA < IL < +20mA
(OPA227 also improves transient immunity)
b) −5mA < IL < +100mA
c) IL (MAX) = IL (TYP) +10mA
IL (MIN) = IL (TYP) −5mA
FIGURE 7. +10V Reference With Output Current Boosted to: a) ±20mA, b) +100mA, and c) IL (TYP) +10mA, –5A.
+15V
28mA
357Ω
1/2W
2
REF102
4
28.5mA
6
+5V
350Ω Strain
Gauge Bridge
5
–
8
VOUT
x100
RG
INA126
2
3
+
–
OPA227
+
10
6
−5V
357Ω
1/2W
–15V
FIGURE 8. Strain Gauge Conditioner for 350Ω Bridge.
V+
2
V+
2
6
6
REF102
+10V
REF102
Out
2
5
6
−10V
Out
R
25kΩ
25kΩ
–
IOUT
4
OPA277
4
+
LOAD
25kΩ
25kΩ
3
1
Can be connected
to ground or −VS .
10V
= , R ≥ 1kΩ
INA105
IOUT
R
See SBVA001 for more details and ISINK Circuit.
See SBVA007 for more details.
FIGURE 9. ±10V Reference.
FIGURE 10. Positive Precision Current Source.
REF102
8
SBVS022A
www.ti.com
31.4V to 56V
2
V+
2
+30V
6
6
REF102
+10V
REF102
INA105
2
5
4
2
4
+20V
6
–
REF102
6
+5V
3
+
4
2
REF102
4
1
+10V
6
FIGURE 13. +5V and +10V Reference.
V+
2
NOTES: (1) REF102s can be stacked to obtain voltages in multiples of 10V.
(2) The supply voltage should be between 10n + 1.4 and 10n + 26, where n is
the number of REF102s. (3) Output current of each REF102 must not exceed
its rated output current of +10, −5mA. This includes the current delivered to
the lower REF102.
2kΩ
6
REF102
(1)
VOUT 1
R2
FIGURE 11. Stacked References.
2kΩ
4
C2
V+
1µF
V+
2
2
2
–
OPA227
2kΩ
6
3
+
R1
+5V
6
REF102
(2)
VOUT 2
1kΩ
Out
+10V
VREF
REF102
2
C1
1µF
INA105
4
4
–5V
5
6
Out
V+
2
VREF = (V01 + V02 … VOUT
)
N
N
–
2kΩ
6
eN = 5µVPP (f = 0.1Hz to 1MHz)
√N
+
REF102
(N)
VOUT N
See SBVA002 for more details.
1
3
4
FIGURE 12. ±5V Reference.
FIGURE 14. Precision Voltage Reference with Extremely
Low Noise.
REF102
SBVS022A
9
www.ti.com
PACKAGE OPTION ADDENDUM
www.ti.com
6-Apr-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package Package
Pins Package Eco Plan (2) Lead/Ball Finish MSL Peak Temp (3)
Qty
Type
TO-99
PDIP
Drawing
LMC
P
REF102AM
REF102AP
OBSOLETE
ACTIVE
8
8
TBD
Call TI
Call TI
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
REF102APG4
REF102AU
ACTIVE
ACTIVE
ACTIVE
ACTIVE
ACTIVE
PDIP
SOIC
SOIC
SOIC
SOIC
P
D
D
D
D
8
8
8
8
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
100 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
REF102AU/2K5
REF102AU/2K5G4
REF102AUG4
2500 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
2500 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
100 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
REF102BM
REF102BP
OBSOLETE
ACTIVE
TO-99
PDIP
LMC
P
8
8
TBD
Call TI
Call TI
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
REF102BPG4
REF102BU
ACTIVE
ACTIVE
ACTIVE
PDIP
SOIC
SOIC
P
D
D
8
8
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
100 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
REF102BUG4
100 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
REF102CM
REF102CP
OBSOLETE
ACTIVE
TO-99
PDIP
LMC
P
8
8
TBD
Call TI
Call TI
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
REF102CPG4
REF102CU
ACTIVE
ACTIVE
ACTIVE
PDIP
SOIC
SOIC
P
D
D
8
8
8
50 Green (RoHS & CU NIPDAU N / A for Pkg Type
no Sb/Br)
100 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
REF102CUG4
100 Green (RoHS & CU NIPDAU Level-2-260C-1 YEAR
no Sb/Br)
REF102RM
REF102SM
OBSOLETE
OBSOLETE
TO-99
TO-99
LMC
LMC
8
8
TBD
TBD
Call TI
Call TI
Call TI
Call TI
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
6-Apr-2007
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MMBC008 – MARCH 2001
LMC (O–MBCY–W8)
METAL CYLINDRICAL
0.370 (9,40)
0.335 (8,51)
ø
ø
0.335 (8,51)
0.305 (7,75)
0.040 (1,02)
0.010 (0,25)
0.185 (4,70)
0.165 (4,19)
0.040 (1,02) MAX
Seating Plane
0.500 (12,70) MIN
0.021 (0,53)
ø
0.016 (0,41)
0.105 (2,67)
0.095 (2,41)
0.105 (2,67)
0.095 (2,41)
0.160 (4,06)
0.140 (3,56)
ø
0.200 (5,08)
3
4
2
5
1
6
45°
8
7
0.034 (0,86)
0.028 (0,71)
0.045 (1,14)
0.029 (0,74)
4202483/A 03/01
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Leads in true position within 0.010 (0,25) R @ MMC at seating plane.
D. Pin numbers shown for reference only. Numbers may not be marked on package.
E. Falls within JEDEC MO-002/TO-99.
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
MECHANICAL DATA
MPDI001A – JANUARY 1995 – REVISED JUNE 1999
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.020 (0,51) MIN
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.430 (10,92)
MAX
0.010 (0,25)
M
0.015 (0,38)
4040082/D 05/98
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to
discontinue any product or service without notice. Customers should obtain the latest relevant information
before placing orders and should verify that such information is current and complete. All products are sold
subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent
TI deems necessary to support this warranty. Except where mandated by government requirements, testing
of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible
for their products and applications using TI components. To minimize the risks associated with customer
products and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent
right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine,
or process in which TI products or services are used. Information published by TI regarding third-party
products or services does not constitute a license from TI to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or
other intellectual property of the third party, or a license from TI under the patents or other intellectual
property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not
responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for
that product or service voids all express and any implied warranties for the associated TI product or service
and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Amplifiers
Data Converters
DSP
Interface
Applications
Audio
Automotive
Broadband
Digital Control
Military
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
interface.ti.com
logic.ti.com
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/military
Logic
Power Mgmt
Microcontrollers
Low Power Wireless
power.ti.com
microcontroller.ti.com
www.ti.com/lpw
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
相关型号:
REF102BM
Three Terminal Voltage Reference, 1 Output, 10V, Trim/Adjustable, MBCY8, METAL CAN, TO-99, 8 PIN
BB
©2020 ICPDF网 联系我们和版权申明