01DT-5QL [BELIMO]

Duct / Immersion Temperature Sensor;


型号：	01DT-5QL
厂家：	BELIMO
描述：	Duct / Immersion Temperature Sensor
文件：	总4页 (文件大小：405K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Technical data sheet

01DT-5Q..

Duct / Immersion Temperature Sensor

For measuring temperature in duct

applications. In connection with a stainless

steel or brass thermowell also applicable for

pipe applications. NEMA 4X / IP65 rated

enclosure.

Type Overview

Type

Output signal

NTC20K

Probe length

2" [50 mm]

Probe diameter

0.24" [6 mm]

01DT-5QH

01DT-5QL

01DT-5QN

01DT-5QP

01DT-5QR

01DT-5QT

4" [100 mm]

6" [150 mm]

8" [200 mm]

12" [300 mm]

18" [450 mm]

Technical Data

Electrical Data Electrical connection

Cable entry

Removable spring loaded terminal block max.

2.5 mm²

Cable gland with strain relief Ø6...8 mm (1/2"

NPT conduit adapter included)

Functional Data

Measuring Data

Output signal passive temperature

Application

NTC20k

air

water

Measuring values

temperature

Measuring range temperature

-60...300°F [-50...150°C]

Accuracy temperature passive

±0.35°F @ 77°F [±0.2°C @ 25°C]

Time constant t (63%) in the air duct

typical 210 s @ 0 m/s

typical 46 s @ 3 m/s

Time constant t (63%) in water pipe

with thermowell A-22P-A.. and thermal

contact fluid

typical 7 s with thermowell brass

typical 9 s with thermowell stainless steel

Materials

Cable gland

Housing

plug adapter: PA66, black

nut: PA6, black

cover: lexan, orange

base: lexan, orange

seal: 0467 NBR70, black

UV resistant

www.belimo.com

01DT-5Q.. • en-us • 2019-08-20 • Subject to change

1 / 4

Technical data sheet

01DT-5Q..

Safety Data Ambient humidity

max. 95% r.H., non-condensing

Ambient temperature

Fluid temperature

-30...120°F [-35...50°C]

-60...300°F [-50...150°C]

max. 195°F [90°C]

Housing surface temperature

Protection class IEC/EN

Protection class UL

EU Conformity

III safety extra-low voltage (selv)

UL Class 2 Supply

CE Marking

Certification IEC/EN

Certification UL

IEC/EN 60730-1

cULus acc. to UL60730-1A/-2-9, CAN/CSA

E60730-1:02/-2-9

Degree of protection IEC/EN

Quality Standard

IP65

ISO 9001

Safety Notes

This device has been designed for use in stationary heating, ventilation and air-conditioning

systems and must not be used outside the specified field of application. Unauthorised

modifications are prohibited. The product must not be used in relation with any equipment

that in case of a failure may threaten humans, animals or assets.

Ensure all power is disconnected before installing. Do not connect to live/operating

equipment.

Only authorised specialists may carry out installation. All applicable legal or institutional

installation regulations must be complied during installation.

The device contains electrical and electronic components and must not be disposed of as

household refuse. All locally valid regulations and requirements must be observed.

Remarks

General Remarks Concerning Sensors Due to self-heating with 2 wire passive sensors, the supply wire current affects the

measurement accuracy, so it should not exceed 1 mA.

When using lengthy connecting cables (depending on the cross section used), the cable

resistance must be taken into account. The lower the impedance of the sensor used, the

greater the effect of the line resistance on the measurement, because it generates an offset.

Scope of delivery

Scope of delivery Description

Mounting clip, with screws and adhesive foil

Type

A-22D-A11

1/2" NPT conduit adapter

www.belimo.com

01DT-5Q.. • en-us • 2019-08-20 • Subject to change

2 / 4

Technical data sheet

01DT-5Q..

Accessories

Optional accessories Description

Mounting plate S housing

Optional accessories air Description

Type

A-22D-A09

Type

Mounting flange for sensor probe 6 mm, up to max. 80°C, Plastic

Mounting flange for sensor probe 6 mm, up to max. 260°C, Brass

A-22D-A03

A-22D-A05

Recommended accessories water Description

Type

Thermowell pocket (fabricated) Stainless steel, 2" [50 mm], 1/2" NPT, A-22P-A05

wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 4" [100 mm], 1/2" NPT, A-22P-A07

wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 6" [150 mm], 1/2" NPT, A-22P-A09

wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 8" [200 mm], 1/2" NPT, A-22P-A11

wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 12" [300 mm], 1/2" NPT, A-22P-A13

wrench size 3/4"

Thermowell pocket (fabricated) Stainless steel, 18" [450 mm], 1/2" NPT, A-22P-A15

wrench size 3/4"

Thermowell pocket (machined) Stainless steel, 2" [50 mm], 1/2" NPT, A-22P-A36

wrench size 3/4"

Thermowell pocket (machined) Stainless steel, 4" [100 mm], 1/2" NPT, A-22P-A37

wrench size 3/4"

Thermowell pocket (machined) Stainless steel, 6" [150 mm], 1/2" NPT, A-22P-A38

wrench size 3/4"

Thermowell pocket (machined) Stainless steel, 8" [200 mm], 1/2" NPT, A-22P-A39

wrench size 3/4"

Thermowell pocket (fabricated) Brass, 2" [50 mm], 1/2" NPT, wrench

size 3/4"

A-22P-A17

Thermowell pocket (fabricated) Brass, 4" [100 mm], 1/2" NPT, wrench A-22P-A19

size 3/4"

Thermowell pocket (fabricated) Brass, 6" [150 mm], 1/2" NPT, wrench A-22P-A21

size 3/4"

Thermowell pocket (fabricated) Brass, 8" [200 mm], 1/2" NPT, wrench A-22P-A23

size 3/4"

Thermowell pocket (fabricated) Brass, 12" [300 mm], 1/2" NPT, wrench A-22P-A25

size 3/4"

Thermowell pocket (fabricated) Brass, 18" [450 mm], 1/2" NPT, wrench A-22P-A27

size 3/4"

Syringe with thermal paste

A-22P-A44

Wiring Diagram

www.belimo.com

01DT-5Q.. • en-us • 2019-08-20 • Subject to change

3 / 4

Technical data sheet

01DT-5Q..

Dimensions

L = Probe length

Type

Probe length

2" [50 mm]

Weight

01DT-5QH

01DT-5QL

01DT-5QN

01DT-5QP

01DT-5QR

01DT-5QT

0.26 lb [0.12 kg]

0.29 lb [0.13 kg]

4" [100 mm]

6" [150 mm]

8" [200 mm]

12" [300 mm] 0.31 lb [0.14 kg]

18" [450 mm] 0.33 lb [0.15 kg]

www.belimo.com

01DT-5Q.. • en-us • 2019-08-20 • Subject to change

4 / 4

相关型号：