01RT-5B-0 [BELIMO]

Room Sensor Temperature;


型号：	01RT-5B-0
厂家：	BELIMO
描述：	Room Sensor Temperature
文件：	总3页 (文件大小：469K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Technical data sheet

01RT-5..

Room Sensor Temperature

Passive wall mount temperature sensors

with an incorporated manual override button

and sleek design. Available with four

different outputs to be seamlessly

connected to existing third-party controllers.

Type Overview

Type

Output signal

Pt1000

01RT-5B-0

01RT-5L-0

01RT-5M-0

01RT-5Q-0

NTC10k (10k2)

NTC10k3 (Precon)

NTC20k

Technical Data

Electrical Data Electrical connection

Cable entry

Spring loaded terminal block 0.5...1.5 mm²

Wire openings at the backside (for In-wall

wiring) and top-/bottom side (for On-wall

wiring)

Functional Data

Measuring Data

Output signal passive temperature

Pt1000

NTC10k (10k2)

NTC10k3 (Precon)

NTC20k

Application

air

Measuring values

Temperature

30...120°F [0...50°C]

Measuring range temperature

Accuracy temperature passive

Measuring current

Passive Sensors depending on used type

Pt.. = ±0.5°F @ 32°F [±0.3°C @ 0°C]

NTC.. = ±0.35°F @ 77°F [±0.2°C @ 25°C]

Pt1000: <0.3 mA @ 32°F [0°C]

NTC10k2: <2 mA @ 77°F [25°C]

NTC10k3: <2.7 mA @ 77°F [25°C]

NTC20k: <0.5 mA @ 77°F [25°C]

Time Constant τ (63%) in the room

Wall Coupling Factor

Housing

typical 360 s

35 %

Materials

white, RAL 9003

www.Belimo.US

01RT-5.. • en-us • 2020-07-02 • Subject to change

1 / 3

Technical data sheet

01RT-5..

Safety Data Ambient humidity

max. 95% r.H., non-condensing

30...120°F [0...50°C]

Ambient temperature

Fluid temperature

30...120°F [0...50°C]

Storage temperature

Protection class IEC/EN

EU Conformity

-4...140°F [-20...60°C]

III Protective extra-low voltage (PELV)

CE Marking

Certification IEC/EN

Degree of protection IEC/EN

Degree of protection NEMA/UL

Quality Standard

IEC/EN 60730-1 and IEC/EN 60730-2-9

IP30

NEMA 1

ISO 9001

Safety Notes

This device has been designed for use in stationary heating, ventilation and air-conditioning

systems and must not be used outside the specified field of application. Unauthorised

modifications are prohibited. The product must not be used in relation with any equipment

that in case of a failure may threaten humans, animals or assets.

Ensure all power is disconnected before installing. Do not connect to live/operating

equipment.

Only authorised specialists may carry out installation. All applicable legal or institutional

installation regulations must be complied during installation.

The device contains electrical and electronic components and must not be disposed of as

household refuse. All locally valid regulations and requirements must be observed.

Remarks

General Remarks Concerning Sensors Due to self-heating with 2 wire passive sensors, the supply wire current affects the

measurement accuracy, so it should not exceed 1 mA.

When using lengthy connecting cables (depending on the cross section used), the cable

resistance must be taken into account. The lower the impedance of the sensor used, the

greater the effect of the line resistance on the measurement, because it generates an offset.

Manual override Once the Manual Override button is pressed, the thermistor within the room sensor is

temporarily shorted out and a signal is sent to the controller. The DDC programmer can

utilize the signal to provide an array of HVAC sequence options.

Scope of delivery

Screws

Wiring Diagram

www.Belimo.US

01RT-5.. • en-us • 2020-07-02 • Subject to change

2 / 3

Technical data sheet

01RT-5..

Dimensions

Type

Weight

01RT-5B-0

01RT-5L-0

01RT-5M-0

01RT-5Q-0

0.19 lb [0.09 kg]

www.Belimo.US

01RT-5.. • en-us • 2020-07-02 • Subject to change

3 / 3

相关型号：