P-01RT-5M-0 [BELIMO]
Room Sensor Temperature;型号: | P-01RT-5M-0 |
厂家: | BELIMO |
描述: | Room Sensor Temperature |
文件: | 总4页 (文件大小:582K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Technical data sheet
P-01RT-5..
Room Sensor Temperature
Passive wall mount temperature sensors
with setpoint adjustment. Sleek design
incorporating a manual override button.
Available with four different outputs to be
seamlessly connected to existing third-party
controllers.
Type Overview
Type
Output signal
Pt1000
Potentiometer
0...1 kOhm
P-01RT-5B-0
P-01RT-5L-0
P-01RT-5M-0
P-01RT-5Q-0
NTC10k (10k2)
0...10 kOhm
NTC10k3 (Precon) 0...10 kOhm
NTC20k
0...10 kOhm
Technical Data
Electrical Data Electrical connection
Cable entry
Spring loaded terminal block 0.5...1.5 mm²
Wire openings at the backside (for In-wall
wiring) and top-/bottom side (for On-wall
wiring)
Functional Data
Measuring Data
Output signal passive temperature
Pt1000
NTC10k (10k2)
NTC10k3 (Precon)
NTC20k
Application
air
Measuring values
Temperature
30...120°F [0...50°C]
Measuring range temperature
Accuracy temperature passive
Passive Sensors depending on used type
Pt.. = ±0.5°F @ 32°F [±0.3°C @ 0°C]
NTC.. = ±0.35°F @ 77°F [±0.2°C @ 25°C]
Accuracy potentiometer
Measuring current
typical ±12%
Pt1000: <0.3 mA @ 32°F [0°C]
NTC10k2: <2 mA @ 77°F [25°C]
NTC10k3: <2.7 mA @ 77°F [25°C]
NTC20k: <0.5 mA @ 77°F [25°C]
Time Constant τ (63%) in the room
Wall Coupling Factor
Housing
typical 360 s
35 %
Materials
white, RAL 9003
www.Belimo.US
P-01RT-5.. • en-us • 2020-07-09 • Subject to change
1 / 4
Technical data sheet
P-01RT-5..
Safety Data Ambient humidity
max. 95% r.H., non-condensing
Ambient temperature
Fluid temperature
30...120°F [0...50°C]
30...120°F [0...50°C]
-4...140°F [-20...60°C]
III Protective extra-low voltage (PELV)
CE Marking
Storage temperature
Protection class IEC/EN
EU Conformity
Certification IEC/EN
Degree of protection IEC/EN
Degree of protection NEMA/UL
Quality Standard
IEC/EN 60730-1 and IEC/EN 60730-2-9
IP30
NEMA 1
ISO 9001
Safety Notes
This device has been designed for use in stationary heating, ventilation and air-conditioning
systems and must not be used outside the specified field of application. Unauthorised
modifications are prohibited. The product must not be used in relation with any equipment
that in case of a failure may threaten humans, animals or assets.
Ensure all power is disconnected before installing. Do not connect to live/operating
equipment.
Only authorised specialists may carry out installation. All applicable legal or institutional
installation regulations must be complied during installation.
The device contains electrical and electronic components and must not be disposed of as
household refuse. All locally valid regulations and requirements must be observed.
Remarks
General Remarks Concerning Sensors Due to self-heating with 2 wire passive sensors, the supply wire current affects the
measurement accuracy, so it should not exceed 1 mA.
When using lengthy connecting cables (depending on the cross section used), the cable
resistance must be taken into account. The lower the impedance of the sensor used, the
greater the effect of the line resistance on the measurement, because it generates an offset.
Manual override Once the Manual Override button is pressed, the thermistor within the room sensor is
temporarily shorted out and a signal is sent to the controller. The DDC programmer can
utilize the signal to provide an array of HVAC sequence options.
Scope of delivery
Screws
www.Belimo.US
P-01RT-5.. • en-us • 2020-07-09 • Subject to change
2 / 4
Technical data sheet
P-01RT-5..
Wiring Diagram
www.Belimo.US
P-01RT-5.. • en-us • 2020-07-09 • Subject to change
3 / 4
Technical data sheet
P-01RT-5..
Dimensions
Type
Weight
P-01RT-5B-0
P-01RT-5L-0
P-01RT-5M-0
P-01RT-5Q-0
0.24 lb [0.11 kg]
0.24 lb [0.11 kg]
0.24 lb [0.11 kg]
0.24 lb [0.11 kg]
www.Belimo.US
P-01RT-5.. • en-us • 2020-07-09 • Subject to change
4 / 4
相关型号:
P-0402E1002BST0
Fixed Resistor, Thin Film, 0.05W, 10000ohm, 75V, 0.1% +/-Tol, -25,25ppm/Cel, 0402
VISHAY
P-0402E1102BSTS
Fixed Resistor, Thin Film, 0.05W, 11000ohm, 75V, 0.1% +/-Tol, -25,25ppm/Cel, 0402
VISHAY
P-0402E1402BBT0
Fixed Resistor, Thin Film, 0.05W, 14000ohm, 75V, 0.1% +/-Tol, 25ppm/Cel, Surface Mount, 0402, CHIP
VISHAY
P-0402E7062BGBS
RESISTOR, THIN FILM, 0.05 W, 0.1 %, 25 ppm, 70600 ohm, SURFACE MOUNT, 0402, CHIP, ROHS COMPLIANT
VISHAY
P-0402E7151BGBS
RESISTOR, THIN FILM, 0.05 W, 0.1 %, 25 ppm, 7150 ohm, SURFACE MOUNT, 0402, CHIP, ROHS COMPLIANT
VISHAY
P-0502E3611AGT0
RESISTOR, THIN FILM, 0.1 W, 0.05 %, 25 ppm, 3610 ohm, SURFACE MOUNT, 0502, CHIP, ROHS COMPLIANT
VISHAY
P-0502E3611AGT3
RESISTOR, THIN FILM, 0.1 W, 0.05 %, 25 ppm, 3610 ohm, SURFACE MOUNT, 0502, CHIP, ROHS COMPLIANT
VISHAY
P-0502E3611AGT5
RESISTOR, THIN FILM, 0.1 W, 0.05 %, 25 ppm, 3610 ohm, SURFACE MOUNT, 0502, CHIP, ROHS COMPLIANT
VISHAY
P-0502E3611AGTF
RESISTOR, THIN FILM, 0.1 W, 0.05 %, 25 ppm, 3610 ohm, SURFACE MOUNT, 0502, CHIP, ROHS COMPLIANT
VISHAY
P-0502E3611AGTS
RESISTOR, THIN FILM, 0.1 W, 0.05 %, 25 ppm, 3610 ohm, SURFACE MOUNT, 0502, CHIP, ROHS COMPLIANT
VISHAY
P-0502E7411BGBS
RESISTOR, THIN FILM, 0.1 W, 0.1 %, 25 ppm, 7410 ohm, SURFACE MOUNT, 0502, CHIP, ROHS COMPLIANT
VISHAY
©2020 ICPDF网 联系我们和版权申明