07LC-25T12LG [BEL]
DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, MODULE-6;型号: | 07LC-25T12LG |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, MODULE-6 |
文件: | 总12页 (文件大小:370K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
0RLC-25T Series
Features
RoHS Compliant
Rev.B
Output Over Voltage Shutdown
Output Voltage Trim
Isolated
High Efficiency
High Power Density
Fixed Frequency (230 KHz)
Low Cost
OCP/SCP
Over Temperature Protection
Remote On/Off
Input Under Voltage Lockout
Remote On/Off Logic (Optional)
Class 1, Category 2, Isolated DC/DC Converter (refer to IPC-9592)
Applications
Networking
Computers and peripherals
Telecommunications
Description
The 0RLC-25T series are isolated dc/dc converters that operate from a nominal 48 Vdc source. These units will
provide up to 30 W of output power. These units are designed to be high efficient and very low cost. Features
include remote on/off, over current protection, and under voltage lockout. These converters are provided in an
industry standard package.
Part Selection
Output Voltage
Input Voltage
Max. Output Max. Output
Typical
Efficiency
Model Number
Active High
Model Number
Active Low
Current
Power
3.3 Vdc
5.0 Vdc
36 Vdc - 75 Vdc
36 Vdc - 75 Vdc
36 Vdc - 75 Vdc
36 Vdc - 75 Vdc
36 Vdc - 75 Vdc
7 A
23 W
88%
90%
90%
90%
89%
0RLC-25T033
0RLC-25T050
0RLC-25T120
0RLC-25T150
0RLC-25T240
0RLC-25T03L
0RLC-25T05L
0RLC-25T12L
0RLC-25T15L
0RLC-25T24L
5 A
25 W
30 W
30 W
30 W
12.0 Vdc
15.0 Vdc
24.0 Vdc
2.5 A
2.0 A
1.25 A
Notes: Add “G” suffix at the end of the model number to indicate Tray Packaging.
Part Number Explanation
0 R LC – 25 T xx x
1
2
3
4
5
6 7
1---Through hole mount
2---RoHS 6, change “R” to “7” means RoHS 5
3---Series name
4---Series code
5---Input range (36-75V)
6---Output voltage
7---Enable, “0” or “3” mean active high, and “L” means active low
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
1
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Absolute Maximum Ratings
Unit
Parameter
Min
-0.3
-0.3
-40
Typ
Max
80
Notes
Input Voltage (continuous)
Remote On/Off
-
-
-
-
V
V
12
Ambient Temperature
Storage Temperature
85
C
C
-55
125
Note: Ratings used beyond the maximum ratings may cause a reliability degradation of the converter or may
permanently damage the device.
Input Specifications
Parameter
Min
Typ
Max
Unit
Notes
Input Voltage
36
-
75
V
Input Current (full load)
-
-
1.1
A
Input Current (no load)
-
-
25
3
40
10
mA
mA
Remote Off Input Current
Input Reflected Ripple Current
(rms)
With simulated source impedance of
10 uH, 5 Hz to 20 MHz. And use a 100
uF/ 100 V electrolytic capacitor with
ESR=1 ohm max, at 200 kHz.
-
-
10
40
20
60
mA
Input Reflected Ripple Current
(pk-pk)
mA
I2t Inrush Current Transient
Turn-on Voltage Threshold
Turn-off Voltage Threshold
-
0.1
34
33
0.5
36
35
A2s
V
31
30
V
Note: All specifications are typical at 25 C unless otherwise stated.
Output Specifications
Parameter
Min
Typ
Max
Unit
Notes
Output Voltage Set Point
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
3.234
4.900
11.76
14.70
23.52
3.3
5.0
12.0
15.0
24.0
3.366
5.100
12.240
15.300
24.480
V
V
V
V
V
Test condition: Vin=48 V,
IO=50% load at the output.
Line Regulation
Load Regulation
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
-
-
-
-
-
±1
±2
±5
±8
±10
±3
±5
±10
±15
±20
mV
mV
mV
mV
mV
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
-
-
-
-
-
±2
±4
±9
±10
±15
±5
±8
±18
±20
±30
mV
mV
mV
mV
mV
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
2
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Output Specifications (continued)
Parameter
Min
Typ
Max
Unit
Notes
Regulation Over Temperature
(-40 C to +85 C)
-
-
-
-
-
30
40
100
120
150
50
70
170
200
240
mV
mV
mV
mV
mV
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
Total Regulation
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
-
-
-
-
-
33
46
114
140
150
58
83
198
250
330
mV
mV
mV
mV
mV
Ripple and Noise (pk-pk)
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
-
-
-
-
-
40
40
40
80
85
75
75
75
120
150
mV
mV
mV
mV
mV
Test condition of the output
ripple and noise: 0-20 MHz BW,
with a 1 µF ceramic capacitor
and a 10 uF/35 V electrolytic
capacitor at the output.
Ripple and Noise (rms)
Output Current Range
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
-
-
-
-
-
10
10
10
15
20
20
20
20
30
40
mV
mV
mV
mV
mV
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
0
0
0
0
0
-
-
-
-
-
7.0
5.0
2.5
2.0
1.25
A
A
A
A
A
Output DC Current Limit
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
7.7
5.5
3.0
2.2
1.5
-
-
-
-
-
12.0
8.0
4.2
3.4
2.2
A
A
A
A
A
VO=24.0 V
Short Circuit Surge Transient
-
-
-
0.5
10
0
1
25
5
A2s
mS
%
Turn on Time
Overshoot at Turn on
Output Capacitance
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
0
0
0
0
0
-
-
-
-
-
3300
2200
330
330
330
uF
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
3
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Output Specifications (continued)
Parameter
Transient Response
Min
Typ
Max
Unit
Notes
Overshoot
Settling Time
Overshoot
-
-
-
-
-
75
100
200
100
200
150
200
150
200
200
200
200
mV
uS
50% ~ 75%
Max Load
150
75
VO=
3.3 V
mV
uS
25% ~ 50%
Max Load
Settling Time
Overshoot
150
100
150
100
150
150
150
150
mV
uS
50% ~ 75%
Max Load
-
-
Settling Time
Overshoot
VO=
5.0 V
mV
uS
25% ~ 50%
Max Load
-
-
-
-
Settling Time
Overshoot
mV
uS
50% ~ 75%
Max Load
Test condition of the transient
response: di/dt=0.1 A/us, Vin=48 V,
with a 220 uF/35 V electrolytic
capacitor at the output.
Settling Time
Overshoot
VO=
12.0 V
mV
25% ~ 50%
Max Load
Settling Time
Overshoot
-
-
-
-
150
100
200
100
200
150
300
150
300
200
200
300
200
300
300
500
300
500
uS
mV
uS
50% ~ 75%
Max Load
Settling Time
Overshoot
VO=
15.0 V
mV
uS
25% ~ 50%
Max Load
-
Settling Time
Overshoot
-
-
-
-
mV
uS
50% ~ 75%
Max Load
Settling Time
Overshoot
VO=
24.0 V
mV
uS
25% ~ 50%
Max Load
Settling Time
Note: All specifications are typical at nominal input, full load at 25°C unless otherwise stated.
General Specifications
Parameter
Min
Typ
Max
Unit
Notes
Efficiency
VO=3.3 V
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
85
87
87
87
86
88
90
90
90
89
-
-
-
-
-
%
%
%
%
%
Measured at Vin=48 V, IO=Io, max
Switching Frequency
I/O Isolation Voltage
Isolation Capacitance
200
230
-
260
kHz
V
1500
-
-
90
-
1500
-
-
110
-
pF
%
Output Voltage Trim Range
Over Temperature Protection
Over Voltage Protection
110
C
VO=3.3 V
3.90
5.70
13.60
17.25
27.60
-
-
-
-
-
-
5.0
7.0
14.2
22.5
36.0
-
V
V
V
V
V
g
Test condition of Over Voltage Protection:
Vin=48 V, Io=100% load at 25 C
ambient.
VO=5.0 V
VO=12.0 V
VO=15.0 V
VO=24.0 V
Weight
20
Calculated Per Bell Core SR-332
(IO = 80% load; Vin=48 V; Vo=3.3 V, Ta =
25 C)
MTBF
2,602,427
hours
-
Dimensions
Inches (L × W × H)
2.0 x 1.0 x 0.438
Millimeters (L × W × H)
50.8 x 25.4 x 11.14
Note: All specifications are typical at 25 C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
4
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Remote On/Off
Parameter
Min
Typ
Max
Unit
Notes
Signal Low (Unit On)
Signal High (Unit Off)
Signal Low (Unit Off)
Signal High (Unit On)
Current Sink
-0.3
-
0.8
V
Active Low
Active High
The remote on/off pin open, Unit off
3.5
-0.3
3.5
0.3
-
-
-
-
12
0.8
12
V
V
The remote on/off pin open, Unit on
V
0.75
mA
Output Trim Equations
Equations for calculating the trim resistor (in kΩ) given the desired adjusted voltage (Vadj) and the nominal
output voltage of the converter (Vnom) are shown below. The Trim Down resistor should be connected between
the Trim pin and Vout. The Trim Up resistor should be connected between the Trim pin and Ground. Only one of
the resistors should be used for any given application.
Vout
Rtrim_down
A
ModuleTrim
Rtrim_ down
B
Vnom Vadj
GND
Vout
C
ModuleTrim
Rtrim_up
D
Vadj Vnom
Rtrim_up
GND
Vnom
24.0
15.0
12.0
5.0
A
B
C
D
272.305
92.125
53.320
19.300
21.711
15.664
9.360
9.260
15.120
40.610
31.634
3.010
18.400
14.025
6.350
2.000
3.650
10.000
30.100
3.3
13.032
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
5
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Efficiency Data
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
90%
85%
80%
75%
70%
65%
60%
55%
50%
36
48
75
36V
48V
75V
0.5A
1.25A
2.5A
3.75A
5A
0.7A
1.75A
3.5A
5.25A
7A
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
0RLC-25T033
0RLC-25T050
95%
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
90%
85%
80%
75%
70%
65%
60%
55%
50%
36
48
75
36
48
75
0.2A
0.5A
1.0A
1.5A
2.0A
0.25A
0.625A
1.25A
1.875A
2.5A
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
0RLC-25T120
0RLC-25T150
95%
90%
85%
80%
75%
70%
65%
60%
55%
50%
36
48
75
0.125A 0.3215A 0.625A 0.9375A 1.25A
OUTPUT CURRENT (A)
0RLC-25T240
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
6
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Thermal Derating Curves
0RLC-25T033
0RLC-25T050
0RLC-25T120
0RLC-25T150
0RLC-25T240
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
7
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Ripple and Noise Waveforms
Ripple and noise at full load, 3.3 Vdc/7 A output
Ripple and noise at full load, 5.0 Vdc/5 A output
Ripple and noise at full load, 12 Vdc/2.5 A output
Ripple and noise at full load, 15 Vdc/2 A output
Ripple and noise at full load, 24 Vdc/1.25 A output
Note: Ripple and noise at 48 Vdc input, with a 0.47 uF ceramic cap at the output, Ta=25 deg C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
8
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Transient Response Waveforms
Transients 25% to 50% load 3.3 Vdc output
Transients 25% to 50% load 5.0 Vdc output
Transients 25% to 50% load 12 Vdc output
Transients 50% to 75% load 3.3 Vdc output
Transients 50% to 75% load 5.0 Vdc output
Transients 50% to 75% load 12 Vdc output
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
9
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Transient Response Waveforms (continued)
Transients 25% to 50% load 15 Vdc output
Transients 50% to 75% load 15 Vdc output
Transients 25% to 50% load 24 Vdc output
Transients 50% to 75% load 24 Vdc output
Note: Transient response at 48 Vdc input, di/dt=0.1 A/uS, with external 220 uF electrolytic cap and 0.47 uF
ceramic cap at the output, and Ta=25 deg C.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
10
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Mechanical Outline
Pin Connections
Pin
Function
1
Vin+
2
Vin-
3
CNT
Vo+
4
5
Vo-
6
Trim
Note: This module is recommended and compatible with Pb-Free Wave Soldering and must be soldered
using a peak solder temperature of no more than 260 ºC for less than 5 seconds.
Note:
1) All Pins: Material - Copper Alloy;
Finish – 3 micro inches minimum Gold over 50 micro inches minimum Nickel plate.
2) Undimensioned components are shown for visual reference only.
3) All dimensions in inches (mm); Tolerances: x.xx +/-0.02 in. (x.x +/-0.5mm) x.xxx +/-0.010 in. (x.xx +/-0.25mm).
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com
11
ISOLATED DC/DC CONVERTERS
48 Vdc Input
3.3 Vdc - 24 Vdc/7 A - 1.25 A Output
Nov. 29, 2010
Bel Power, Inc. , a subsidiary of Bel Fuse, Inc.
Revision History
Date
Revision
Changes Detail
Approval
XF Jiang
XF Jiang
2007-03-02
2010-11-29
A
B
First Release.
Update the notes in Remote On/Off.
.
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and
other hazardous substances from electronic products.
2010 Bel Fuse Inc. Specifications subject to change without notice. 112910
12
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F/ 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
相关型号:
07M1003FF
RESISTOR, TEMPERATURE DEPENDENT, NTC, 100000 ohm, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
VISHAY
07M1003JF
RESISTOR, TEMPERATURE DEPENDENT, NTC, 100000 ohm, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
VISHAY
07M1003SFA3
RESISTOR, TEMPERATURE DEPENDENT, NTC, 100000 ohm, THROUGH HOLE MOUNT, RADIAL LEADED, LEAD FREE
VISHAY
©2020 ICPDF网 联系我们和版权申明