07SB-50TV2L
更新时间：2024-09-18 14:50:59
品牌：BEL
描述：DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, PACKAGE-8
概述
规格参数
数据手册07SB-50TV2L 概述
DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, PACKAGE-8 电源模块
07SB-50TV2L 规格参数
| 是否无铅： | 含铅 | 是否Rohs认证： | 不符合 |
| 生命周期： | Active | 零件包装代码： | MODULE |
| 包装说明： | PACKAGE-8 | 针数： | 8 |
| Reach Compliance Code： | compliant | ECCN代码： | EAR99 |
| 风险等级： | 5.19 | 模拟集成电路 - 其他类型： | DC-DC REGULATED POWER SUPPLY MODULE |
| 最大输入电压： | 75 V | 最小输入电压： | 36 V |
| 标称输入电压： | 48 V | JESD-30 代码： | R-XDMA-T8 |
| 功能数量： | 1 | 输出次数： | 1 |
| 端子数量： | 8 | 最高工作温度： | 85 °C |
| 最低工作温度： | -40 °C | 最大输出电压： | 1.32 V |
| 最小输出电压： | 1.08 V | 标称输出电压： | 1.2 V |
| 封装主体材料： | UNSPECIFIED | 封装形状： | RECTANGULAR |
| 封装形式： | MICROELECTRONIC ASSEMBLY | 峰值回流温度（摄氏度）： | NOT SPECIFIED |
| 认证状态： | Not Qualified | 表面贴装： | NO |
| 技术： | HYBRID | 温度等级： | INDUSTRIAL |
| 端子形式： | THROUGH-HOLE | 端子位置： | DUAL |
| 处于峰值回流温度下的最长时间： | NOT SPECIFIED | 最大总功率输出： | 30 W |
| 微调/可调输出： | YES | Base Number Matches： | 1 |
07SB-50TV2L 数据手册
通过下载07SB-50TV2L数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
xRSB-50T Series
RoHS Compliant
Rev.D
• Isolated
•
•
•
•
•
•
•
Input Under Voltage Lockout
Output Over Voltage Shutdown
OCP/SCP
• Fixed Frequency (600 kHz)
• High Efficiency
• High Power Density
• Low Cost
Over Temperature Protection
Remote On/Off (option)
• Output Voltage Trim
• Basic Insulation
Positive/Negative Remote Sense
Through Hole and SMT (option)
• UL60950-1 Recognized (UL/cUL)
Description
The xRSB-50T series are isolated dc/dc converters that operate from a nominal 48 Vdc source. These units will
provide up to 60 W of output power from a nominal 48 Vdc input. These units are designed to be highly efficient
and low cost. Features include remote on/off, over current protection and under voltage lockout. These converters
are provided in an industry standard sixteenth brick package.
Part Selection
Output
Input
Max. Output
Current
Max. Output
Power
Typical
Efficiency
Model Number
Active Low
Model Number
Active High
Voltage
Voltage
1.5 V
1.8 V
2.5 V
3.3 V
5.0 V
12 V
36 V - 75 V
36 V - 75 V
36 V - 75 V
36 V - 75 V
36 V - 75 V
36 V - 75 V
22 A
20 A
18 A
15 A
12 A
5 A
33 W
36 W
45 W
50 W
60 W
60 W
85%
87%
87%
89%
90%
89%
xRSB-50TV5L
xRSB-50TV8L
xRSB-50T02L
xRSB-50T03L
xRSB-50T05L
xRSB-50T12L
xRSB-50TV50
xRSB-50TV80
xRSB-50T025
xRSB-50T033
xRSB-50T050
xRSB-50T120
Notes: 1. Add “G” suffix at the end of the model number to indicate Tray Packaging. Replace”x” with “S” to
indicate SMT package, or “0” to indicate through hole package.
2. All part numbers above indicate RoHS 6. Change the second letter "R" to "7" for RoHS 5 part numbers.
Absolute Maximum Ratings
Parameter
Min
Typ
Max
Notes
Input Voltage (continuous)
-0.3 V
-
80 V
Input Voltage Transient (100 ms)
Remote On/Off
-0.3 V
-0.3 V
-
100 V
18 V
-
-
-
-
I/O Isolation Voltage
Ambient Temperature
Storage Temperature
1500 V
85 °C
125 °C
-40 °C
-55 °C
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Input Specifications
Parameter
Min
Typ
Max
Notes
Input Voltage
36 V
48 V
75 V
Input Current (full load)
Input Current (no load)
Remote Off Input Current
-
-
-
-
2.4 A
120 mA
3 mA
70 mA
1 mA
Tested with simulated source impedance of
15 uH, 5 Hz to 20 MHz; use a 100 uF/100 V
electrolytic capacitor with ESR=1 ohm max
at 200 kHz at the input.
Input Reflected Ripple Current (pk-pk)
-
-
20 mA
50 mA
Input Reflected Ripple Current (rms)
3 mA
7 mA
I2t Inrush Current Transient
Turn On Voltage Threshold
Turn Off Voltage Threshold
-
0.01 A2s 0.02 A2s
31 V
30 V
32 V
31 V
35 V
34 V
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Output Specifications
Parameter
Min
Typ
Max
Notes
Output Voltage Set Point
Vo=1.5 V
Vo=1.8 V
Vo=2.5 V
Vo=3.3 V
Vo=5.0 V
Vo=12 V
1.478 V
1.773 V
2.463 V
3.250 V
4.925 V
11.750 V
1.5 V
1.8 V
2.5 V
3.3 V
5.0 V
12.0 V
1.523 V
1.827 V
2.538 V
3.350 V
5.075 V
12.250 V
Test conditions:
Vin=48 V; Io=50%
load
Line Regulation
Load Regulation
±0.5 mV
±1 mV
±3 mV
±4 mV
±10 mV
±3 mV
±6 mV
±8 mV
±9 mV
±25 mV
Vo=1.5 - 1.8 V
Vo=2.5 V
Vo=3.3 V
Vo=5.0 V
Vo=12 V
-
-
-
-
-
±3 mV
±4 mV
±9 mV
±5 mV
±9 mV
±18 mV
Vo=1.5 - 2.5 V
Vo=3.3 - 5.0 V
Vo=12 V
-
-
-
Regulation Over Temperature(-40 °C to +85 °C)
Vo=1.5 - 1.8 V
±6 mV
±9 mV
±15 mV
±20 mV
±14 mV
±16 mV
±30 mV
±35 mV
-
-
-
-
Vo=2.5 - 3.3 V
Vo=5.0 V
Vo=12 V
Output Current
Vo=1.5 V
Vo=1.8 V
Vo=2.5 V
Vo=3.3 V
Vo=5.0 V
Vo=12 V
0 A
0 A
0 A
0 A
0 A
0 A
-
-
-
-
-
-
22 A
20 A
18 A
15 A
12 A
5 A
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Output Specifications (continued)
Parameter
Min
Typ
Max
Notes
Current Limit Threshold
Vo=1.5 V
Vo=1.8 V
Vo=2.5 V
Vo=3.3 V
Vo=5.0 V
Vo=12 V
28 A
24 A
22 A
19 A
14 A
5.2 A
34 A
28 A
26 A
22 A
19 A
6.5 A
40 A
34 A
30 A
26 A
24 A
8.5 A
Short Circuit Surge Transient
Ripple and Noise (rms)
-
0.5 A2s
1 A2s
Vo=1.5 - 1.8 V
Vo=2.5 V
Vo=3.3 V
Vo=5.0 V
Vo=12 V
-
-
-
-
-
6 mV
10 mV
12 mV
25 mV
30 mV
12 mV
20 mV
25 mV
50 mV
55 mV
Tested at 0-20 MHz
BW, with a 1 uF
ceramic capacitor and
a Tantalum capacitor
(refer to the min.
Ripple and Noise (pk-pk)
output capacitance
below for each output)
at the output.
Vo=1.5 - 1.8 V
Vo=2.5 V
Vo=3.3 V
Vo=5.0 V
Vo=12 V
-
-
-
-
-
40 mV
45 mV
55 mV
70 mV
90 mV
70 mV
80 mV
90 mV
120 mV
180 mV
Turn on Time
-
-
35 mS
0%
70 mS
5%
Overshoot at Turn on
Output Capacitance
Vo=1.5 V
Vo=1.8 - 2.5 V
Vo=3.3 V
470 uF
470 uF
220 uF
100 uF
22 uF
-
-
-
-
-
15000 uF
10000 uF
5600 uF
4700 uF
470 uF
Recommend to use
AVX TPS series
Tantalum capacitor as
the min capacitor
Vo=5.0 V
Vo=12 V
Transient Response
Overshoot
Settling Time
Overshoot
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
110 mV
110 uS
110 mV
110 uS
150 mV
120 uS
150 mV
120 uS
220 mV
120 uS
220 mV
120 uS
400 mV
150 uS
400 mV
150 uS
150 mV
180 uS
150 mV
180 uS
250 mV
200 uS
250 mV
200 uS
350 mV
250 uS
350 mV
250 uS
650 mV
300 uS
650 mV
300 uS
25% ~ 50%
Max Load
Vo=1.5 - 1.8 V
Vo=2.5 - 3.3 V
Vo=5.0 V
50% ~ 25%
Max Load
Settling Time
Overshoot
25% ~ 50%
Max Load
Test conditions: di/dt
= 0.1 A/uS, Vin=48 V,
with a 1uF ceramic
capacitor and a
Tantalum capacitor
(refer to the min.
output capacitance
above for each
output) at the output.
Settling Time
Overshoot
50% ~ 25%
Max Load
Settling Time
Overshoot
25% ~ 50%
Max Load
Settling Time
Overshoot
50% ~ 25%
Max Load
Settling Time
Overshoot
25% ~ 50%
Max Load
Settling Time
Overshoot
Vo=12 V
50% ~ 25%
Max Load
Settling Time
Note: All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
General Specifications
Parameter
Min
Typ
Max
Notes
Efficiency
Vo=1.5 V
Vo=1.8 - 2.5 V
Vo=3.3 V
82%
84%
86%
87%
86%
85%
87%
89%
90%
89%
-
-
-
-
-
Vin=48 V, full load
Vo=5.0 V
Vo=12 V
Switching Frequency
540 kHz
-
600 kHz
3900 pF
660 kHz
-
Isolation Capacitance
Output Voltage Trim Range
Vo=1.5 - 5.0 V
Vo=12 V
90% Vo
80% Vo
-
-
110% Vo
110% Vo
Over Temperature Protection
-
120 °C
140 °C
Test conditions: Vin=48 V, full load and
short the feedback optocoupler.
Over Voltage Protection
-
130% Vo
160% Vo
Calculated Per Bell Core SR-332 (IO
=80% load, Vin=48 V, Vo=5 V; Ta = 25
°C)
MTBF
2,770,832 hours
Dimensions
Inches (L × W × H)
1.3 x 0.9 x 0.364
SMT Package
Millimeters (L × W × H)
33.02 x 22.86 x 9.24
Dimensions
Inches (L × W × H)
Through Hole Package
1.3 x 0.9 x 0.378
Millimeters (L × W × H)
33.02 x 22.86 x 9.60
Weight
-
13 g
-
Note: All specifications are typical at 25 °C unless otherwise stated.
Control Specifications
Parameter
Min
Typ
Max
Notes
Remote On/Off
Signal Low (Unit On)
Signal High (Unit Off)
Signal Low (Unit Off)
Signal High (Unit On)
Current Sink
-0.3 V
2.95 V
-0.3 V
2.95 V
0 mA
-
-
-
-
-
0.8 V
18 V
0.8 V
18 V
1 mA
Active Low
When Remote On/Off pin is
open, for active low option, unit
is off; for active high option, unit
is on
Active High
-
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Output Trim Equations
Equations for calculating the trim resistor are shown below (Unit: kΩ). The Trim Down resistor should be
connected between the Trim pin and Ground pin. The Trim Up resistor should be connected between the Trim pin
and the Vout. Only one of the resistors should be used for any given application.
Vout
511
Rtrimdown
=
−10.22
Module
Module
Trim
GND
delta
Rtrimdown
Rtrimup
Vout
Trim
GND
(100 + delta)⋅Vo⋅5.11− 626
1.225⋅delta
Rtrimup
=
−10.22
Note:
(
Vo _ req −Vo
)
delta =
×100
%
[ ]
Vo
Vo_req=Desired (trimmed) output voltage [V]
Vo=1.503 V for 1.5 V output; Vo=1.804 V for 1.8 V output; Vo=2.505 V for 2.5 V output; Vo=3.308 V for 3.3 V
output; Vo=5.002 V for 5 V output; Vo=12.007 V for 12 V output.
Efficiency Data
90%
85%
80%
75%
70%
65%
60%
55%
50%
90%
85%
80%
75%
70%
65%
60%
55%
50%
36 V
48 V
75 V
36V
48V
75V
2A
5A
10A
15A
20A
2.2A
5.5A
11A
16A
22A
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Vo=1.5 V
Vo=1.8 V
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Efficiency Data (continued)
90%
85%
80%
90%
85%
80%
75%
70%
65%
60%
55%
50%
36V
48V
75V
36V
48V
75V
75%
70%
65%
60%
55%
50%
1.8A
4.5A
9A
12.A
18A
1.5A
3.75A
7.5A
11.25A
15A
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Vo=2.5 V
Vo=3.3 V
90%
85%
80%
75%
70%
65%
60%
55%
50%
90%
85%
80%
75%
70%
65%
60%
55%
50%
36 V
48 V
75 V
36 V
48 V
75 V
0.5A
1.25A
2.5A
3.75A
5A
1.2A
3A
6A
9A
12A
OUTPUT CURRENT (A)
OUTPUT CURRENT (A)
Vo=5.0 V
Vo=12 V
Thermal Derating Curves
Vin=48 V, Vo=1.8 V
Vin=48 V, Vo=2.5 V
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Thermal Derating Curves (continued)
Vin=48 V, Vo=3.3 V,
Vin=48 V, Vo=5.0 V
Vin=48 V, Vo=12 V
Ripple and Noise Waveforms
Vo=1.8 V
Vo=2.5 V
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Ripple and Noise Waveforms (continued)
Vo=3.3 V
Vo=5.0 V
Vo=12 V
Note: Ripple and Noise at full load, 48 V input, Ta=25 deg C.
1) For Vo=1.8 V -2.5 V, with a 1 uF ceramic capacitor and a 470 uF tantalum cap at the output;
2) For Vo=3.3 V, with a 1 uF ceramic capacitor and a 220 uF tantalum cap at the output;
3) For Vo=5.0 V, with a 1 uF ceramic capacitor and a 100 uF tantalum cap at the output;
4) For Vo=12 V, with a 1 uF ceramic capacitor and a 22 uF tantalum cap at the output.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Transient Response Waveforms
Vo=1.8 V 50% to 25% Load Transients
Vo=1.8 V 25% to 50% Load Transients
Vo=2.5 V 50% to 25% Load Transients
Vo=2.5 V 25% to 50% Load Transients
Vo=3.3 V 50% to 25% Load Transients
Vo=3.3 V 25% to 50% Load Transients
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Transient Response Waveforms (continued)
Vo=5 V 50% to 25% Load Transients
Vo=5 V 25% to 50% Load Transients
Vo=12 V 50% to 25% Load Transients
Vo=12 V 25% to 50% Load Transients
Note: Transients Response at Vin=48 V, di/dt=0.1A/uS, Ta=25 deg C.
1) For Vo=1.8 V -2.5 V, with a 1 uF ceramic capacitor and a 470 uF tantalum cap at the output;
2) For Vo=3.3 V, with a 1 uF ceramic capacitor and a 220 uF tantalum cap at the output;
3) For Vo=5.0 V, with a 1 uF ceramic capacitor and a 100 uF tantalum cap at the output;
4) For Vo=12 V, with a 1 uF ceramic capacitor and a 22 uF tantalum cap at the output.
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Mechanical Outline
SMT Package
Pin Connections
Pin
Function
1
Vin (+)
2
Remote On/Off
Vin (-)
3
4
Vout-
5
Remote Sense (-)
Trim
6
7
Remote Sense (+)
Vout (+)
8
Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
ISOLATED DC/DC CONVERTERS
48 Vdc Input 1.5 Vdc - 12 Vdc / 22 A - 5 A Outputs, 1/16 Brick
Mechanical Outline (continued)
Through Hole Package
Pin Connections
Pin
Function
1
Vin (+)
2
Remote On/Off
Vin (-)
3
4
Vout-
5
Remote Sense (-)
Trim
6
7
Remote Sense (+)
Vout (+)
8
RoHS Compliance
Complies with the European Directive 2002/95/EC, calling for the elimination of lead and
other hazardous substances from electronic products.
©2008 Bel Fuse Inc. Specifications subject to change without notice. 110408
CORPORATE
FAR EAST
EUROPE
Bel Fuse Inc.
Bel Fuse Ltd.
Bel Fuse Europe Ltd.
206 Van Vorst Street
Jersey City, NJ 07302
Tel 201-432-0463
Fax 201-432-9542
www.belfuse.com
8F/ 8 Luk Hop Street
San Po Kong
Kowloon, Hong Kong
Tel 852-2328-5515
Fax 852-2352-3706
www.belfuse.com
Preston Technology Management Centre
Marsh Lane, Suite G7, Preston
Lancashire, PR1 8UD, U.K.
Tel 44-1772-556601
Fax 44-1772-888366
www.belfuse.com
07SB-50TV2L 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| 07SB-50TV2LG | BEL | DC-DC Regulated Power Supply Module, 1 Output, 30W, Hybrid, PACKAGE-8 | 获取价格 |
|
| 07SB-50TV50 | BEL | DC-DC Regulated Power Supply Module, 1 Output, 33W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SB-50TV50G | BEL | DC-DC Regulated Power Supply Module, 1 Output, 33W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SB-50TV5L | BEL | DC-DC Regulated Power Supply Module, 1 Output, 33W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SB-50TV5LG | BEL | DC-DC Regulated Power Supply Module, 1 Output, 33W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SB-50TV80 | BEL | DC-DC Regulated Power Supply Module, 1 Output, 36W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SB-50TV80G | BEL | DC-DC Regulated Power Supply Module, 1 Output, 36W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SB-50TV8L | BEL | DC-DC Regulated Power Supply Module, 1 Output, 36W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SB-50TV8LG | BEL | DC-DC Regulated Power Supply Module, 1 Output, 36W, Hybrid, MODULE-8 | 获取价格 |
|
| 07SR-3S | ETC | Disconnectable Insulation displacement connectors | 获取价格 |
|
07SB-50TV2L 相关文章
Bourns 密封通孔金属陶瓷微调电位计产品选型手册(英文版)
- 2024-09-20
- 6
Bourns 精密环境传感器产品选型手册(英文版)
- 2024-09-20
- 9
Bourns POWrTher 负温度系数(NTC)热敏电阻手册 (英文版)
- 2024-09-20
- 8
Bourns GMOV 混合过压保护组件产品选型手册(英文版)
- 2024-09-20
- 6
